diff mbox

[dpdk-dev,v7,1/6] igb_uio: refactor irq enable/disable into own functions

Message ID 1504613046-7259-1-git-send-email-markus.theil@tu-ilmenau.de (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Markus Theil Sept. 5, 2017, 12:04 p.m. UTC 
  Interrupt setup code in igb_uio has to deal with multiple
types of interrupts and kernel versions. This patch moves
the setup and teardown code into own functions, to make
it more readable.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 112 +++++++++++++++++-------------
 1 file changed, 64 insertions(+), 48 deletions(-)

Comments

Ferruh Yigit Sept. 11, 2017, 5:48 p.m. UTC | #1 
On 9/5/2017 1:04 PM, Markus Theil wrote:
> Interrupt setup code in igb_uio has to deal with multiple
> types of interrupts and kernel versions. This patch moves
> the setup and teardown code into own functions, to make
> it more readable.
> 
> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>

Series Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>


!Not tested new added MSI interrupts.
Markus, can you please confirm you have tested MSI and can you please
provide details of the setup you have tested this on?

Thanks,
ferruh
Markus Theil Sept. 14, 2017, 12:04 p.m. UTC | #2 
Tested-by: Markus Theil <markus.theil@tu-ilmenau.de>

The MSI mode was tested in two setups:
1. With a custom driver I'm currently developing.
2. With i210 based APU2C4 boards and check of link status interrupt in
testpmd.

On 11.09.2017 19:48, Ferruh Yigit wrote:
> On 9/5/2017 1:04 PM, Markus Theil wrote:
>> Interrupt setup code in igb_uio has to deal with multiple
>> types of interrupts and kernel versions. This patch moves
>> the setup and teardown code into own functions, to make
>> it more readable.
>>
>> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
> Series Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
>
>
> !Not tested new added MSI interrupts.
> Markus, can you please confirm you have tested MSI and can you please
> provide details of the setup you have tested this on?
>
> Thanks,
> ferruh
Ferruh Yigit Oct. 6, 2017, 10:05 p.m. UTC | #3 
On 9/14/2017 1:04 PM, Markus Theil wrote:
<...>
> On 11.09.2017 19:48, Ferruh Yigit wrote:
>> On 9/5/2017 1:04 PM, Markus Theil wrote:
>>> Interrupt setup code in igb_uio has to deal with multiple
>>> types of interrupts and kernel versions. This patch moves
>>> the setup and teardown code into own functions, to make
>>> it more readable.
>>>
>>> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
>> Series Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

> Tested-by: Markus Theil <markus.theil@tu-ilmenau.de>

Series applied to dpdk/master, thanks.
diff mbox

Patch

diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 07a19a3..e2e9263 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -309,6 +309,66 @@  igbuio_pci_release_iomem(struct uio_info *info)
 }
 
 static int
+igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
+{
+	int err = 0;
+#ifdef HAVE_PCI_ENABLE_MSIX
+	struct msix_entry msix_entry;
+#endif
+
+	switch (igbuio_intr_mode_preferred) {
+	case RTE_INTR_MODE_MSIX:
+		/* Only 1 msi-x vector needed */
+#ifdef HAVE_PCI_ENABLE_MSIX
+		msix_entry.entry = 0;
+		if (pci_enable_msix(udev->pdev, &msix_entry, 1) == 0) {
+			dev_dbg(&udev->pdev->dev, "using MSI-X");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = msix_entry.vector;
+			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
+		}
+#else
+		if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSIX) == 1) {
+			dev_dbg(&udev->pdev->dev, "using MSI-X");
+			udev->info.irq = pci_irq_vector(udev->pdev, 0);
+			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
+		}
+#endif
+	/* fall back to INTX */
+	case RTE_INTR_MODE_LEGACY:
+		if (pci_intx_mask_supported(udev->pdev)) {
+			dev_dbg(&udev->pdev->dev, "using INTX");
+			udev->info.irq_flags = IRQF_SHARED | IRQF_NO_THREAD;
+			udev->info.irq = udev->pdev->irq;
+			udev->mode = RTE_INTR_MODE_LEGACY;
+			break;
+		}
+		dev_notice(&udev->pdev->dev, "PCI INTX mask not supported\n");
+		/* fall back to no IRQ */
+	case RTE_INTR_MODE_NONE:
+		udev->mode = RTE_INTR_MODE_NONE;
+		udev->info.irq = 0;
+		break;
+
+	default:
+		dev_err(&udev->pdev->dev, "invalid IRQ mode %u",
+			igbuio_intr_mode_preferred);
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+static void
+igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev)
+{
+	if (udev->mode == RTE_INTR_MODE_MSIX)
+		pci_disable_msix(udev->pdev);
+}
+
+static int
 igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info)
 {
 	int i, iom, iop, ret;
@@ -356,9 +416,6 @@  static int
 igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct rte_uio_pci_dev *udev;
-#ifdef HAVE_PCI_ENABLE_MSIX
-	struct msix_entry msix_entry;
-#endif
 	dma_addr_t map_dma_addr;
 	void *map_addr;
 	int err;
@@ -413,48 +470,9 @@  igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	udev->info.priv = udev;
 	udev->pdev = dev;
 
-	switch (igbuio_intr_mode_preferred) {
-	case RTE_INTR_MODE_MSIX:
-		/* Only 1 msi-x vector needed */
-#ifdef HAVE_PCI_ENABLE_MSIX
-		msix_entry.entry = 0;
-		if (pci_enable_msix(dev, &msix_entry, 1) == 0) {
-			dev_dbg(&dev->dev, "using MSI-X");
-			udev->info.irq_flags = IRQF_NO_THREAD;
-			udev->info.irq = msix_entry.vector;
-			udev->mode = RTE_INTR_MODE_MSIX;
-			break;
-		}
-#else
-		if (pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_MSIX) == 1) {
-			dev_dbg(&dev->dev, "using MSI-X");
-			udev->info.irq = pci_irq_vector(dev, 0);
-			udev->mode = RTE_INTR_MODE_MSIX;
-			break;
-		}
-#endif
-		/* fall back to INTX */
-	case RTE_INTR_MODE_LEGACY:
-		if (pci_intx_mask_supported(dev)) {
-			dev_dbg(&dev->dev, "using INTX");
-			udev->info.irq_flags = IRQF_SHARED | IRQF_NO_THREAD;
-			udev->info.irq = dev->irq;
-			udev->mode = RTE_INTR_MODE_LEGACY;
-			break;
-		}
-		dev_notice(&dev->dev, "PCI INTX mask not supported\n");
-		/* fall back to no IRQ */
-	case RTE_INTR_MODE_NONE:
-		udev->mode = RTE_INTR_MODE_NONE;
-		udev->info.irq = 0;
-		break;
-
-	default:
-		dev_err(&dev->dev, "invalid IRQ mode %u",
-			igbuio_intr_mode_preferred);
-		err = -EINVAL;
+	err = igbuio_pci_enable_interrupts(udev);
+	if (err != 0)
 		goto fail_release_iomem;
-	}
 
 	err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
 	if (err != 0)
@@ -497,8 +515,7 @@  igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
 fail_release_iomem:
 	igbuio_pci_release_iomem(&udev->info);
-	if (udev->mode == RTE_INTR_MODE_MSIX)
-		pci_disable_msix(udev->pdev);
+	igbuio_pci_disable_interrupts(udev);
 	pci_disable_device(dev);
 fail_free:
 	kfree(udev);
@@ -514,8 +531,7 @@  igbuio_pci_remove(struct pci_dev *dev)
 	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
 	uio_unregister_device(&udev->info);
 	igbuio_pci_release_iomem(&udev->info);
-	if (udev->mode == RTE_INTR_MODE_MSIX)
-		pci_disable_msix(dev);
+	igbuio_pci_disable_interrupts(udev);
 	pci_disable_device(dev);
 	pci_set_drvdata(dev, NULL);
 	kfree(udev);