[dpdk-dev,3/4] app/testpmd: add option to avoid lock all memory
Checks
Commit Message
In some cases, we don't want to lock all memory.
Add an option --no-mlockall to avoid lock all memory.
Cc: wenzhuo.lu@intel.com
Cc: jingjing.wu@intel.com
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
---
app/test-pmd/parameters.c | 5 ++++-
app/test-pmd/testpmd.c | 32 ++++++++++++++++++--------------
app/test-pmd/testpmd.h | 1 +
3 files changed, 23 insertions(+), 15 deletions(-)
Comments
New options is added, the doc also need to update.
> -----Original Message-----
> From: Tan, Jianfeng
> Sent: Wednesday, February 14, 2018 12:02 PM
> To: dev@dpdk.org
> Cc: Tan, Jianfeng <jianfeng.tan@intel.com>; Lu, Wenzhuo <wenzhuo.lu@intel.com>; Wu,
> Jingjing <jingjing.wu@intel.com>
> Subject: [PATCH 3/4] app/testpmd: add option to avoid lock all memory
>
> In some cases, we don't want to lock all memory.
>
> Add an option --no-mlockall to avoid lock all memory.
>
> Cc: wenzhuo.lu@intel.com
> Cc: jingjing.wu@intel.com
>
> Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
> ---
> app/test-pmd/parameters.c | 5 ++++-
> app/test-pmd/testpmd.c | 32 ++++++++++++++++++--------------
> app/test-pmd/testpmd.h | 1 +
> 3 files changed, 23 insertions(+), 15 deletions(-)
>
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> index 97d22b8..5060a6c 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -186,6 +186,7 @@ usage(char* progname)
> printf(" --flow-isolate-all: "
> "requests flow API isolated mode on all ports at initialization time.\n");
> printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
> + printf(" --no-mlockall: do not lock all memory\n");
> }
>
> #ifdef RTE_LIBRTE_CMDLINE
> @@ -621,6 +622,7 @@ launch_args_parse(int argc, char** argv)
> { "print-event", 1, 0, 0 },
> { "mask-event", 1, 0, 0 },
> { "tx-offloads", 1, 0, 0 },
> + { "no-mlockall", 0, 0, 0 },
> { 0, 0, 0, 0 },
> };
>
> @@ -1102,7 +1104,8 @@ launch_args_parse(int argc, char** argv)
> rte_exit(EXIT_FAILURE,
> "invalid mask-event argument\n");
> }
> -
> + if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
> + no_mlockall = 1;
> break;
> case 'h':
> usage(argv[0]);
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index 4c0e258..59bdc85 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -294,6 +294,10 @@ uint32_t event_print_mask = (UINT32_C(1) <<
> RTE_ETH_EVENT_UNKNOWN) |
> (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
> (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
> (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
> +/*
> + * Decide if all memory are locked for performance.
> + */
> +int no_mlockall = 0;
>
> /*
> * NIC bypass mode configuration options.
> @@ -2489,7 +2493,20 @@ main(int argc, char** argv)
> rte_panic("Cannot register log type");
> rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
>
> - if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
> + /* Bitrate/latency stats disabled by default */
> +#ifdef RTE_LIBRTE_BITRATE
> + bitrate_enabled = 0;
> +#endif
> +#ifdef RTE_LIBRTE_LATENCY_STATS
> + latencystats_enabled = 0;
> +#endif
> +
> + argc -= diag;
> + argv += diag;
> + if (argc > 1)
> + launch_args_parse(argc, argv);
> +
> + if (!no_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
> TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
> strerror(errno));
> }
> @@ -2511,19 +2528,6 @@ main(int argc, char** argv)
> rte_panic("Empty set of forwarding logical cores - check the "
> "core mask supplied in the command parameters\n");
>
> - /* Bitrate/latency stats disabled by default */
> -#ifdef RTE_LIBRTE_BITRATE
> - bitrate_enabled = 0;
> -#endif
> -#ifdef RTE_LIBRTE_LATENCY_STATS
> - latencystats_enabled = 0;
> -#endif
> -
> - argc -= diag;
> - argv += diag;
> - if (argc > 1)
> - launch_args_parse(argc, argv);
> -
> if (tx_first && interactive)
> rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
> "interactive mode.\n");
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 153abea..028b873 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -319,6 +319,7 @@ extern volatile int test_done; /* stop packet forwarding when set
> to 1. */
> extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
> extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
> extern uint32_t event_print_mask;
> +extern int no_mlockall; /**< set by "--no-mlockall" parameter */
> /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
>
> #ifdef RTE_LIBRTE_IXGBE_BYPASS
> --
> 2.7.4
@@ -186,6 +186,7 @@ usage(char* progname)
printf(" --flow-isolate-all: "
"requests flow API isolated mode on all ports at initialization time.\n");
printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
+ printf(" --no-mlockall: do not lock all memory\n");
}
#ifdef RTE_LIBRTE_CMDLINE
@@ -621,6 +622,7 @@ launch_args_parse(int argc, char** argv)
{ "print-event", 1, 0, 0 },
{ "mask-event", 1, 0, 0 },
{ "tx-offloads", 1, 0, 0 },
+ { "no-mlockall", 0, 0, 0 },
{ 0, 0, 0, 0 },
};
@@ -1102,7 +1104,8 @@ launch_args_parse(int argc, char** argv)
rte_exit(EXIT_FAILURE,
"invalid mask-event argument\n");
}
-
+ if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
+ no_mlockall = 1;
break;
case 'h':
usage(argv[0]);
@@ -294,6 +294,10 @@ uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
(UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+/*
+ * Decide if all memory are locked for performance.
+ */
+int no_mlockall = 0;
/*
* NIC bypass mode configuration options.
@@ -2489,7 +2493,20 @@ main(int argc, char** argv)
rte_panic("Cannot register log type");
rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
- if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
+ /* Bitrate/latency stats disabled by default */
+#ifdef RTE_LIBRTE_BITRATE
+ bitrate_enabled = 0;
+#endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+ latencystats_enabled = 0;
+#endif
+
+ argc -= diag;
+ argv += diag;
+ if (argc > 1)
+ launch_args_parse(argc, argv);
+
+ if (!no_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
strerror(errno));
}
@@ -2511,19 +2528,6 @@ main(int argc, char** argv)
rte_panic("Empty set of forwarding logical cores - check the "
"core mask supplied in the command parameters\n");
- /* Bitrate/latency stats disabled by default */
-#ifdef RTE_LIBRTE_BITRATE
- bitrate_enabled = 0;
-#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
- latencystats_enabled = 0;
-#endif
-
- argc -= diag;
- argv += diag;
- if (argc > 1)
- launch_args_parse(argc, argv);
-
if (tx_first && interactive)
rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
"interactive mode.\n");
@@ -319,6 +319,7 @@ extern volatile int test_done; /* stop packet forwarding when set to 1. */
extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
extern uint32_t event_print_mask;
+extern int no_mlockall; /**< set by "--no-mlockall" parameter */
/**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
#ifdef RTE_LIBRTE_IXGBE_BYPASS