diff mbox

[dpdk-dev,06/80] net/sfc/base: add efsys option for Medford2

Message ID 1519112078-20113-7-git-send-email-arybchenko@solarflare.com (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation fail apply patch file failure

Commit Message

Andrew Rybchenko Feb. 20, 2018, 7:33 a.m. UTC 
  From: Andy Moreton <amoreton@solarflare.com>

Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 drivers/net/sfc/base/efx_check.h | 97 +++++++++++++++++++++++-----------------
 drivers/net/sfc/efsys.h          |  2 +
 2 files changed, 59 insertions(+), 40 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/sfc/base/efx_check.h b/drivers/net/sfc/base/efx_check.h
index 5837775..0c85702 100644
--- a/drivers/net/sfc/base/efx_check.h
+++ b/drivers/net/sfc/base/efx_check.h
@@ -30,8 +30,9 @@ 
 
 #if EFSYS_OPT_CHECK_REG
 /* Verify chip implements accessed registers */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "CHECK_REG requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "CHECK_REG requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_CHECK_REG */
 
@@ -44,15 +45,17 @@ 
 
 #if EFSYS_OPT_DIAG
 /* Support diagnostic hardware tests */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "DIAG requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "DIAG requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_DIAG */
 
 #if EFSYS_OPT_EV_PREFETCH
 /* Support optimized EVQ data access */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "EV_PREFETCH requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "EV_PREFETCH requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_EV_PREFETCH */
 
@@ -62,21 +65,23 @@ 
 
 #if EFSYS_OPT_FILTER
 /* Support hardware packet filters */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "FILTER requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "FILTER requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_FILTER */
 
-#if (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
+#if (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
 # if !EFSYS_OPT_FILTER
-#  error "HUNTINGTON or MEDFORD requires FILTER"
+#  error "HUNTINGTON or MEDFORD or MEDFORD2 requires FILTER"
 # endif
 #endif /* EFSYS_OPT_HUNTINGTON */
 
 #if EFSYS_OPT_LOOPBACK
 /* Support hardware loopback modes */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "LOOPBACK requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "LOOPBACK requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_LOOPBACK */
 
@@ -90,21 +95,24 @@ 
 
 #if EFSYS_OPT_MAC_STATS
 /* Support MAC statistics */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "MAC_STATS requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "MAC_STATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_MAC_STATS */
 
 #if EFSYS_OPT_MCDI
 /* Support management controller messages */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "MCDI requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "MCDI requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_MCDI */
 
-#if (EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
+#if (EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
 # if !EFSYS_OPT_MCDI
-#  error "SIENA or HUNTINGTON or MEDFORD requires MCDI"
+#  error "SIENA or HUNTINGTON or MEDFORD or MEDFORD2 requires MCDI"
 # endif
 #endif
 
@@ -144,15 +152,17 @@ 
 
 #if EFSYS_OPT_MON_STATS
 /* Support monitor statistics (voltage/temperature) */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "MON_STATS requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "MON_STATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_MON_STATS */
 
 #if EFSYS_OPT_MON_MCDI
 /* Support Monitor via mcdi */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "MON_MCDI requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "MON_MCDI requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_MON_MCDI*/
 
@@ -166,8 +176,9 @@ 
 
 #if EFSYS_OPT_NVRAM
 /* Support non volatile configuration */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "NVRAM requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "NVRAM requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_NVRAM */
 
@@ -200,8 +211,9 @@ 
 
 #if EFSYS_OPT_PHY_LED_CONTROL
 /* Support for PHY LED control */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "PHY_LED_CONTROL requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "PHY_LED_CONTROL requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_PHY_LED_CONTROL */
 
@@ -246,8 +258,9 @@ 
 
 #if EFSYS_OPT_QSTATS
 /* Support EVQ/RXQ/TXQ statistics */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "QSTATS requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "QSTATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_QSTATS */
 
@@ -257,15 +270,17 @@ 
 
 #if EFSYS_OPT_RX_SCALE
 /* Support receive scaling (RSS) */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "RX_SCALE requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "RX_SCALE requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_RX_SCALE */
 
 #if EFSYS_OPT_RX_SCATTER
 /* Support receive scatter DMA */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "RX_SCATTER requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "RX_SCATTER requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_RX_SCATTER */
 
@@ -275,8 +290,9 @@ 
 
 #if EFSYS_OPT_VPD
 /* Support PCI Vital Product Data (VPD) */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "VPD requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "VPD requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_VPD */
 
@@ -290,8 +306,9 @@ 
 
 #if EFSYS_OPT_BIST
 /* Support BIST */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "BIST requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
+	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "BIST requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_BIST */
 
@@ -307,15 +324,15 @@ 
 
 #if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
 /* Support adapters with missing static config (for factory use only) */
-# if !EFSYS_OPT_MEDFORD
-#  error "ALLOW_UNCONFIGURED_NIC requires MEDFORD"
+# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "ALLOW_UNCONFIGURED_NIC requires MEDFORD or MEDFORD2"
 # endif
 #endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
 
 #if EFSYS_OPT_RX_PACKED_STREAM
 /* Support packed stream mode */
-# if !(EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-#  error "PACKED_STREAM requires HUNTINGTON or MEDFORD"
+# if !(EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+#  error "PACKED_STREAM requires HUNTINGTON or MEDFORD or MEDFORD2"
 # endif
 #endif
 
diff --git a/drivers/net/sfc/efsys.h b/drivers/net/sfc/efsys.h
index ecbd14f..fcc4f5f 100644
--- a/drivers/net/sfc/efsys.h
+++ b/drivers/net/sfc/efsys.h
@@ -150,6 +150,8 @@  prefetch_read_once(const volatile void *addr)
 #define EFSYS_OPT_HUNTINGTON 1
 /* Enable SFN8xxx support */
 #define EFSYS_OPT_MEDFORD 1
+/* Disable SFN2xxx support (not supported yet) */
+#define EFSYS_OPT_MEDFORD2 0
 #ifdef RTE_LIBRTE_SFC_EFX_DEBUG
 #define EFSYS_OPT_CHECK_REG 1
 #else