DPDK  24.03.0
Macros | Functions
rte_mbuf_ptype.h File Reference
#include <stddef.h>
#include <stdint.h>

Go to the source code of this file.

Macros

#define RTE_PTYPE_UNKNOWN   0x00000000
 
#define RTE_PTYPE_L2_ETHER   0x00000001
 
#define RTE_PTYPE_L2_ETHER_TIMESYNC   0x00000002
 
#define RTE_PTYPE_L2_ETHER_ARP   0x00000003
 
#define RTE_PTYPE_L2_ETHER_LLDP   0x00000004
 
#define RTE_PTYPE_L2_ETHER_NSH   0x00000005
 
#define RTE_PTYPE_L2_ETHER_VLAN   0x00000006
 
#define RTE_PTYPE_L2_ETHER_QINQ   0x00000007
 
#define RTE_PTYPE_L2_ETHER_PPPOE   0x00000008
 
#define RTE_PTYPE_L2_ETHER_FCOE   0x00000009
 
#define RTE_PTYPE_L2_ETHER_MPLS   0x0000000a
 
#define RTE_PTYPE_L2_MASK   0x0000000f
 
#define RTE_PTYPE_L3_IPV4   0x00000010
 
#define RTE_PTYPE_L3_IPV4_EXT   0x00000030
 
#define RTE_PTYPE_L3_IPV6   0x00000040
 
#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN   0x00000090
 
#define RTE_PTYPE_L3_IPV6_EXT   0x000000c0
 
#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN   0x000000e0
 
#define RTE_PTYPE_L3_MASK   0x000000f0
 
#define RTE_PTYPE_L4_TCP   0x00000100
 
#define RTE_PTYPE_L4_UDP   0x00000200
 
#define RTE_PTYPE_L4_FRAG   0x00000300
 
#define RTE_PTYPE_L4_SCTP   0x00000400
 
#define RTE_PTYPE_L4_ICMP   0x00000500
 
#define RTE_PTYPE_L4_NONFRAG   0x00000600
 
#define RTE_PTYPE_L4_IGMP   0x00000700
 
#define RTE_PTYPE_L4_MASK   0x00000f00
 
#define RTE_PTYPE_TUNNEL_IP   0x00001000
 
#define RTE_PTYPE_TUNNEL_GRE   0x00002000
 
#define RTE_PTYPE_TUNNEL_VXLAN   0x00003000
 
#define RTE_PTYPE_TUNNEL_NVGRE   0x00004000
 
#define RTE_PTYPE_TUNNEL_GENEVE   0x00005000
 
#define RTE_PTYPE_TUNNEL_GRENAT   0x00006000
 
#define RTE_PTYPE_TUNNEL_GTPC   0x00007000
 
#define RTE_PTYPE_TUNNEL_GTPU   0x00008000
 
#define RTE_PTYPE_TUNNEL_ESP   0x00009000
 
#define RTE_PTYPE_TUNNEL_L2TP   0x0000a000
 
#define RTE_PTYPE_TUNNEL_VXLAN_GPE   0x0000b000
 
#define RTE_PTYPE_TUNNEL_MPLS_IN_GRE   0x0000c000
 
#define RTE_PTYPE_TUNNEL_MPLS_IN_UDP   0x0000d000
 
#define RTE_PTYPE_TUNNEL_MASK   0x0000f000
 
#define RTE_PTYPE_INNER_L2_ETHER   0x00010000
 
#define RTE_PTYPE_INNER_L2_ETHER_VLAN   0x00020000
 
#define RTE_PTYPE_INNER_L2_ETHER_QINQ   0x00030000
 
#define RTE_PTYPE_INNER_L2_MASK   0x000f0000
 
#define RTE_PTYPE_INNER_L3_IPV4   0x00100000
 
#define RTE_PTYPE_INNER_L3_IPV4_EXT   0x00200000
 
#define RTE_PTYPE_INNER_L3_IPV6   0x00300000
 
#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN   0x00400000
 
#define RTE_PTYPE_INNER_L3_IPV6_EXT   0x00500000
 
#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN   0x00600000
 
#define RTE_PTYPE_INNER_L3_MASK   0x00f00000
 
#define RTE_PTYPE_INNER_L4_TCP   0x01000000
 
#define RTE_PTYPE_INNER_L4_UDP   0x02000000
 
#define RTE_PTYPE_INNER_L4_FRAG   0x03000000
 
#define RTE_PTYPE_INNER_L4_SCTP   0x04000000
 
#define RTE_PTYPE_INNER_L4_ICMP   0x05000000
 
#define RTE_PTYPE_INNER_L4_NONFRAG   0x06000000
 
#define RTE_PTYPE_INNER_L4_MASK   0x0f000000
 
#define RTE_PTYPE_ALL_MASK   0x0fffffff
 
#define RTE_ETH_IS_IPV4_HDR(ptype)   ((ptype) & RTE_PTYPE_L3_IPV4)
 
#define RTE_ETH_IS_IPV6_HDR(ptype)   ((ptype) & RTE_PTYPE_L3_IPV6)
 

Functions

const char * rte_get_ptype_l2_name (uint32_t ptype)
 
const char * rte_get_ptype_l3_name (uint32_t ptype)
 
const char * rte_get_ptype_l4_name (uint32_t ptype)
 
const char * rte_get_ptype_tunnel_name (uint32_t ptype)
 
const char * rte_get_ptype_inner_l2_name (uint32_t ptype)
 
const char * rte_get_ptype_inner_l3_name (uint32_t ptype)
 
const char * rte_get_ptype_inner_l4_name (uint32_t ptype)
 
int rte_get_ptype_name (uint32_t ptype, char *buf, size_t buflen)
 

Detailed Description

RTE Mbuf Packet Types

This file contains declarations for features related to mbuf packet types. The packet type gives information about the data carried by the mbuf, and is stored in the mbuf in a 32 bits field.

The 32 bits are divided into several fields to mark packet types. Note that each field is indexical.

To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT, RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.

Note that L3 types values are selected for checking IPV4/IPV6 header from performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.

Note that the packet types of the same packet recognized by different hardware may be different, as different hardware may have different capability of packet type recognition.

examples: <'ether type'=0x0800 | 'version'=4, 'protocol'=0x29 | 'version'=6, 'next header'=0x3A | 'ICMPv6 header'> will be recognized on i40e hardware as packet type combination of, RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN | RTE_PTYPE_TUNNEL_IP | RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | RTE_PTYPE_INNER_L4_ICMP.

<'ether type'=0x86DD | 'version'=6, 'next header'=0x2F | 'GRE header' | 'version'=6, 'next header'=0x11 | 'UDP header'> will be recognized on i40e hardware as packet type combination of, RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN | RTE_PTYPE_TUNNEL_GRENAT | RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | RTE_PTYPE_INNER_L4_UDP.

Definition in file rte_mbuf_ptype.h.

Macro Definition Documentation

◆ RTE_PTYPE_UNKNOWN

#define RTE_PTYPE_UNKNOWN   0x00000000

◆ RTE_PTYPE_L2_ETHER

#define RTE_PTYPE_L2_ETHER   0x00000001

Ethernet packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=[0x0800|0x86DD]>

Definition at line 83 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_TIMESYNC

#define RTE_PTYPE_L2_ETHER_TIMESYNC   0x00000002

Ethernet packet type for time sync.

Packet format: <'ether type'=0x88F7>

Definition at line 90 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_ARP

#define RTE_PTYPE_L2_ETHER_ARP   0x00000003

ARP (Address Resolution Protocol) packet type.

Packet format: <'ether type'=0x0806>

Definition at line 97 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_LLDP

#define RTE_PTYPE_L2_ETHER_LLDP   0x00000004

LLDP (Link Layer Discovery Protocol) packet type.

Packet format: <'ether type'=0x88CC>

Definition at line 104 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_NSH

#define RTE_PTYPE_L2_ETHER_NSH   0x00000005

NSH (Network Service Header) packet type.

Packet format: <'ether type'=0x894F>

Definition at line 111 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_VLAN

#define RTE_PTYPE_L2_ETHER_VLAN   0x00000006

VLAN packet type.

Packet format: <'ether type'=[0x8100]>

Definition at line 118 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_QINQ

#define RTE_PTYPE_L2_ETHER_QINQ   0x00000007

QinQ packet type.

Packet format: <'ether type'=[0x88A8]>

Definition at line 125 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_PPPOE

#define RTE_PTYPE_L2_ETHER_PPPOE   0x00000008

PPPOE packet type.

Packet format: <'ether type'=[0x8863|0x8864]>

Definition at line 132 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_FCOE

#define RTE_PTYPE_L2_ETHER_FCOE   0x00000009

FCoE packet type.

Packet format: <'ether type'=[0x8906]>

Definition at line 139 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_ETHER_MPLS

#define RTE_PTYPE_L2_ETHER_MPLS   0x0000000a

MPLS packet type.

Packet format: <'ether type'=[0x8847|0x8848]>

Definition at line 146 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L2_MASK

#define RTE_PTYPE_L2_MASK   0x0000000f

Mask of layer 2 packet types. It is used for outer packet for tunneling cases.

Definition at line 151 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_IPV4

#define RTE_PTYPE_L3_IPV4   0x00000010

IP (Internet Protocol) version 4 packet type. It is used for outer packet for tunneling cases, and does not contain any header option.

Packet format: <'ether type'=0x0800 | 'version'=4, 'ihl'=5>

Examples:
examples/ip_fragmentation/main.c, examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/ipsec_worker.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, examples/l3fwd/l3fwd_fib.c, examples/l3fwd/l3fwd_lpm.c, and examples/vhost/main.c.

Definition at line 161 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_IPV4_EXT

#define RTE_PTYPE_L3_IPV4_EXT   0x00000030

IP (Internet Protocol) version 4 packet type. It is used for outer packet for tunneling cases, and contains header options.

Packet format: <'ether type'=0x0800 | 'version'=4, 'ihl'=[6-15], 'options'>

Examples:
examples/l3fwd/l3fwd_em.c.

Definition at line 171 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_IPV6

#define RTE_PTYPE_L3_IPV6   0x00000040

IP (Internet Protocol) version 6 packet type. It is used for outer packet for tunneling cases, and does not contain any extension header.

Packet format: <'ether type'=0x86DD | 'version'=6, 'next header'=0x3B>

Examples:
examples/ip_fragmentation/main.c, examples/ipsec-secgw/ipsec-secgw.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, and examples/l3fwd/l3fwd_lpm.c.

Definition at line 181 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_IPV4_EXT_UNKNOWN

#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN   0x00000090

IP (Internet Protocol) version 4 packet type. It is used for outer packet for tunneling cases, and may or maynot contain header options.

Packet format: <'ether type'=0x0800 | 'version'=4, 'ihl'=[5-15], <'options'>>

Examples:
examples/ip_fragmentation/main.c, examples/ipsec-secgw/ipsec-secgw.c, examples/l3fwd-power/main.c, and examples/l3fwd/l3fwd_lpm.c.

Definition at line 191 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_IPV6_EXT

#define RTE_PTYPE_L3_IPV6_EXT   0x000000c0

IP (Internet Protocol) version 6 packet type. It is used for outer packet for tunneling cases, and contains extension headers.

Packet format: <'ether type'=0x86DD | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], 'extension headers'>

Examples:
examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/ipsec_worker.c, and examples/l3fwd/l3fwd_em.c.

Definition at line 202 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_IPV6_EXT_UNKNOWN

#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN   0x000000e0

IP (Internet Protocol) version 6 packet type. It is used for outer packet for tunneling cases, and may or maynot contain extension headers.

Packet format: <'ether type'=0x86DD | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], <'extension headers'>>

Examples:
examples/ip_fragmentation/main.c, examples/ipsec-secgw/ipsec_worker.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, and examples/l3fwd/l3fwd_lpm.c.

Definition at line 213 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L3_MASK

#define RTE_PTYPE_L3_MASK   0x000000f0

◆ RTE_PTYPE_L4_TCP

#define RTE_PTYPE_L4_TCP   0x00000100

TCP (Transmission Control Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=6, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=6>

Examples:
examples/l3fwd/l3fwd_em.c.

Definition at line 230 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_UDP

#define RTE_PTYPE_L4_UDP   0x00000200

UDP (User Datagram Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17>

Examples:
examples/ipsec-secgw/ipsec-secgw.c, and examples/l3fwd/l3fwd_em.c.

Definition at line 242 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_FRAG

#define RTE_PTYPE_L4_FRAG   0x00000300

Fragmented IP (Internet Protocol) packet type. It is used for outer packet for tunneling cases.

It refers to those packets of any IP types, which can be recognized as fragmented. A fragmented packet cannot be recognized as any other L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP, RTE_PTYPE_L4_NONFRAG).

Packet format: <'ether type'=0x0800 | 'version'=4, 'MF'=1> or, <'ether type'=0x0800 | 'version'=4, 'frag_offset'!=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=44>

Definition at line 262 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_SCTP

#define RTE_PTYPE_L4_SCTP   0x00000400

SCTP (Stream Control Transmission Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=132, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=132>

Definition at line 274 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_ICMP

#define RTE_PTYPE_L4_ICMP   0x00000500

ICMP (Internet Control Message Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=1, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=1>

Definition at line 286 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_NONFRAG

#define RTE_PTYPE_L4_NONFRAG   0x00000600

Non-fragmented IP (Internet Protocol) packet type. It is used for outer packet for tunneling cases.

It refers to those packets of any IP types, while cannot be recognized as any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'!=[6|17|44|132|1]>

Definition at line 302 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_IGMP

#define RTE_PTYPE_L4_IGMP   0x00000700

IGMP (Internet Group Management Protocol) packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=2, 'MF'=0, 'frag_offset'=0>

Definition at line 310 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_L4_MASK

#define RTE_PTYPE_L4_MASK   0x00000f00

Mask of layer 4 packet types. It is used for outer packet for tunneling cases.

Examples:
examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/ipsec.c, and examples/l3fwd/l3fwd_em.c.

Definition at line 315 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_IP

#define RTE_PTYPE_TUNNEL_IP   0x00001000

IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=[4|41]> or, <'ether type'=0x86DD | 'version'=6, 'next header'=[4|41]>

Definition at line 326 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_GRE

#define RTE_PTYPE_TUNNEL_GRE   0x00002000

GRE (Generic Routing Encapsulation) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=47> or, <'ether type'=0x86DD | 'version'=6, 'next header'=47>

Definition at line 337 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_VXLAN

#define RTE_PTYPE_TUNNEL_VXLAN   0x00003000

VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=4789> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=4789>

Definition at line 350 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_NVGRE

#define RTE_PTYPE_TUNNEL_NVGRE   0x00004000

NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=47 | 'protocol type'=0x6558> or, <'ether type'=0x86DD | 'version'=6, 'next header'=47 | 'protocol type'=0x6558'>

Definition at line 364 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_GENEVE

#define RTE_PTYPE_TUNNEL_GENEVE   0x00005000

GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=6081> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=6081>

Definition at line 377 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_GRENAT

#define RTE_PTYPE_TUNNEL_GRENAT   0x00006000

Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area Network) or GRE (Generic Routing Encapsulation) could be recognized as this packet type, if they can not be recognized independently as of hardware capability.

Definition at line 384 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_GTPC

#define RTE_PTYPE_TUNNEL_GTPC   0x00007000

GTP-C (GPRS Tunnelling Protocol) control tunneling packet type. Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=2123> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=2123> or, <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'source port'=2123> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'source port'=2123>

Definition at line 404 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_GTPU

#define RTE_PTYPE_TUNNEL_GTPU   0x00008000

GTP-U (GPRS Tunnelling Protocol) user data tunneling packet type. Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=2152> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=2152>

Definition at line 416 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_ESP

#define RTE_PTYPE_TUNNEL_ESP   0x00009000

ESP (IP Encapsulating Security Payload) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=50> or, <'ether type'=0x86DD | 'version'=6, 'next header'=50>

Examples:
examples/ipsec-secgw/esp.c, examples/ipsec-secgw/ipsec-secgw.c, and examples/ipsec-secgw/ipsec_worker.c.

Definition at line 427 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_L2TP

#define RTE_PTYPE_TUNNEL_L2TP   0x0000a000

L2TP (Layer 2 Tunneling Protocol) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17> | 'destination port'=1701> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=1701> or, <'ether type'=0x0800 | 'version'=4, 'protocol'=115> or, <'ether type'=0x86DD | 'version'=6, 'protocol'=115>

Definition at line 446 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_VXLAN_GPE

#define RTE_PTYPE_TUNNEL_VXLAN_GPE   0x0000b000

VXLAN-GPE (VXLAN Generic Protocol Extension) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=4790> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=4790>

Definition at line 459 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_MPLS_IN_GRE

#define RTE_PTYPE_TUNNEL_MPLS_IN_GRE   0x0000c000

MPLS-in-GRE tunneling packet type (RFC 4023).

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=47 | 'protocol'=0x8847> or, <'ether type'=0x0800 | 'version'=4, 'protocol'=47 | 'protocol'=0x8848> or, <'ether type'=0x86DD | 'version'=6, 'protocol'=47 | 'protocol'=0x8847> or, <'ether type'=0x86DD | 'version'=6, 'next header'=47 | 'protocol'=0x8848>

Definition at line 480 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_MPLS_IN_UDP

#define RTE_PTYPE_TUNNEL_MPLS_IN_UDP   0x0000d000

MPLS-in-UDP tunneling packet type (RFC 7510).

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=6635> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=6635>

Definition at line 493 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_TUNNEL_MASK

#define RTE_PTYPE_TUNNEL_MASK   0x0000f000

Mask of tunneling packet types.

Examples:
examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/ipsec.c, and examples/ipsec-secgw/ipsec_worker.c.

Definition at line 497 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L2_ETHER

#define RTE_PTYPE_INNER_L2_ETHER   0x00010000

Ethernet packet type. It is used for inner packet type only.

Packet format (inner only): <'ether type'=[0x800|0x86DD]>

Definition at line 505 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L2_ETHER_VLAN

#define RTE_PTYPE_INNER_L2_ETHER_VLAN   0x00020000

Ethernet packet type with VLAN (Virtual Local Area Network) tag.

Packet format (inner only): <'ether type'=[0x800|0x86DD], vlan=[1-4095]>

Definition at line 512 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L2_ETHER_QINQ

#define RTE_PTYPE_INNER_L2_ETHER_QINQ   0x00030000

QinQ packet type.

Packet format: <'ether type'=[0x88A8]>

Definition at line 519 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L2_MASK

#define RTE_PTYPE_INNER_L2_MASK   0x000f0000

Mask of inner layer 2 packet types.

Definition at line 523 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_IPV4

#define RTE_PTYPE_INNER_L3_IPV4   0x00100000

IP (Internet Protocol) version 4 packet type. It is used for inner packet only, and does not contain any header option.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'ihl'=5>

Definition at line 532 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_IPV4_EXT

#define RTE_PTYPE_INNER_L3_IPV4_EXT   0x00200000

IP (Internet Protocol) version 4 packet type. It is used for inner packet only, and contains header options.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'ihl'=[6-15], 'options'>

Definition at line 541 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_IPV6

#define RTE_PTYPE_INNER_L3_IPV6   0x00300000

IP (Internet Protocol) version 6 packet type. It is used for inner packet only, and does not contain any extension header.

Packet format (inner only): <'ether type'=0x86DD | 'version'=6, 'next header'=0x3B>

Definition at line 550 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN

#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN   0x00400000

IP (Internet Protocol) version 4 packet type. It is used for inner packet only, and may or maynot contain header options.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'ihl'=[5-15], <'options'>>

Definition at line 559 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_IPV6_EXT

#define RTE_PTYPE_INNER_L3_IPV6_EXT   0x00500000

IP (Internet Protocol) version 6 packet type. It is used for inner packet only, and contains extension headers.

Packet format (inner only): <'ether type'=0x86DD | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], 'extension headers'>

Definition at line 569 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN

#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN   0x00600000

IP (Internet Protocol) version 6 packet type. It is used for inner packet only, and may or maynot contain extension headers.

Packet format (inner only): <'ether type'=0x86DD | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], <'extension headers'>>

Definition at line 580 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L3_MASK

#define RTE_PTYPE_INNER_L3_MASK   0x00f00000

Mask of inner layer 3 packet types.

Definition at line 584 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_TCP

#define RTE_PTYPE_INNER_L4_TCP   0x01000000

TCP (Transmission Control Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=6, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=6>

Definition at line 596 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_UDP

#define RTE_PTYPE_INNER_L4_UDP   0x02000000

UDP (User Datagram Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=17, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17>

Definition at line 608 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_FRAG

#define RTE_PTYPE_INNER_L4_FRAG   0x03000000

Fragmented IP (Internet Protocol) packet type. It is used for inner packet only, and may or maynot have layer 4 packet.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'MF'=1> or, <'ether type'=0x0800 | 'version'=4, 'frag_offset'!=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=44>

Definition at line 623 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_SCTP

#define RTE_PTYPE_INNER_L4_SCTP   0x04000000

SCTP (Stream Control Transmission Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=132, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=132>

Definition at line 635 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_ICMP

#define RTE_PTYPE_INNER_L4_ICMP   0x05000000

ICMP (Internet Control Message Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=1, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=1>

Definition at line 647 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_NONFRAG

#define RTE_PTYPE_INNER_L4_NONFRAG   0x06000000

Non-fragmented IP (Internet Protocol) packet type. It is used for inner packet only, and may or maynot have other unknown layer 4 packet types.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'!=[6|17|44|132|1]>

Definition at line 660 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_INNER_L4_MASK

#define RTE_PTYPE_INNER_L4_MASK   0x0f000000

Mask of inner layer 4 packet types.

Definition at line 664 of file rte_mbuf_ptype.h.

◆ RTE_PTYPE_ALL_MASK

#define RTE_PTYPE_ALL_MASK   0x0fffffff

All valid layer masks.

Examples:
examples/vhost/main.c.

Definition at line 668 of file rte_mbuf_ptype.h.

◆ RTE_ETH_IS_IPV4_HDR

#define RTE_ETH_IS_IPV4_HDR (   ptype)    ((ptype) & RTE_PTYPE_L3_IPV4)

Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can determine if it is an IPV4 packet.

Examples:
examples/ip_fragmentation/main.c, examples/ip_reassembly/main.c, examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/ipsec_worker.c, examples/l3fwd-power/main.c, and examples/l3fwd/l3fwd_lpm.c.

Definition at line 675 of file rte_mbuf_ptype.h.

◆ RTE_ETH_IS_IPV6_HDR

#define RTE_ETH_IS_IPV6_HDR (   ptype)    ((ptype) & RTE_PTYPE_L3_IPV6)

Check if the (outer) L3 header is IPv6. To avoid comparing IPv6 types one by one, bit 6 is selected to be used for IPv6 only. Then checking bit 6 can determine if it is an IPV6 packet.

Examples:
examples/ip_fragmentation/main.c, examples/ip_reassembly/main.c, examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/ipsec_worker.c, examples/l3fwd-power/main.c, and examples/l3fwd/l3fwd_lpm.c.

Definition at line 682 of file rte_mbuf_ptype.h.

Function Documentation

◆ rte_get_ptype_l2_name()

const char* rte_get_ptype_l2_name ( uint32_t  ptype)

Get the name of the l2 packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_l3_name()

const char* rte_get_ptype_l3_name ( uint32_t  ptype)

Get the name of the l3 packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_l4_name()

const char* rte_get_ptype_l4_name ( uint32_t  ptype)

Get the name of the l4 packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_tunnel_name()

const char* rte_get_ptype_tunnel_name ( uint32_t  ptype)

Get the name of the tunnel packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_inner_l2_name()

const char* rte_get_ptype_inner_l2_name ( uint32_t  ptype)

Get the name of the inner_l2 packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_inner_l3_name()

const char* rte_get_ptype_inner_l3_name ( uint32_t  ptype)

Get the name of the inner_l3 packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_inner_l4_name()

const char* rte_get_ptype_inner_l4_name ( uint32_t  ptype)

Get the name of the inner_l4 packet type

Parameters
ptypeThe packet type value.
Returns
A non-null string describing the packet type.

◆ rte_get_ptype_name()

int rte_get_ptype_name ( uint32_t  ptype,
char *  buf,
size_t  buflen 
)

Write the packet type name into the buffer

Parameters
ptypeThe packet type value.
bufThe buffer where the string is written.
buflenThe length of the buffer.
Returns
  • 0 on success
  • (-1) if the buffer is too small