4. dpdk-devbind Application
dpdk-devbind tool is a Data Plane Development Kit (DPDK) utility
that helps binding and unbinding devices from specific drivers.
As well as checking their status in that regard.
4.1. Running the Application
The tool has a number of command line options:
dpdk-devbind [options] DEVICE1 DEVICE2 ....
Display usage information and quit
Print the current status of all known network interfaces. For each device, it displays the PCI domain, bus, slot and function, along with a text description of the device. Depending upon whether the device is being used by a kernel driver, the
igb_uiodriver, or no driver, other relevant information will be displayed: - the Linux interface name e.g.
if=eth0- the driver being used e.g.
drv=igb_uio- any suitable drivers not currently using that device e.g.
unused=igb_uioNOTE: if this flag is passed along with a bind/unbind option, the status display will always occur after the other operations have taken place.
-b driver, --bind=driver
Select the driver to use or “none” to unbind the device
Unbind a device (Equivalent to
By default, devices which are used by Linux - as indicated by having routes in the routing table - cannot be modified. Using the
--forceflag overrides this behavior, allowing active links to be forcibly unbound. WARNING: This can lead to loss of network connection and should be used with caution.
Due to the way VFIO works, there are certain limitations to which devices can be used with VFIO. Mainly it comes down to how IOMMU groups work. Any Virtual Function device can be used with VFIO on its own, but physical devices will require either all ports bound to VFIO, or some of them bound to VFIO while others not being bound to anything at all.
If your device is behind a PCI-to-PCI bridge, the bridge will then be part of the IOMMU group in which your device is in. Therefore, the bridge driver should also be unbound from the bridge PCI device for VFIO to work with devices behind the bridge.
While any user can run the
dpdk-devbind.py script to view the status of the network ports,
binding or unbinding network ports requires root privileges.
To display current device status:
To bind eth1 from the current driver and move to use igb_uio:
dpdk-devbind --bind=igb_uio eth1
To unbind 0000:01:00.0 from using any driver:
dpdk-devbind -u 0000:01:00.0
To bind 0000:02:00.0 and 0000:02:00.1 to the ixgbe kernel driver:
dpdk-devbind -b ixgbe 02:00.0 02:00.1
To check status of all network ports, assign one to the igb_uio driver and check status again:
# Check the status of the available devices. dpdk-devbind --status Network devices using DPDK-compatible driver ============================================ <none> Network devices using kernel driver =================================== 0000:0a:00.0 '82599ES 10-Gigabit' if=eth2 drv=ixgbe unused= # Bind the device to igb_uio. sudo dpdk-devbind -b igb_uio 0000:0a:00.0 # Recheck the status of the devices. dpdk-devbind --status Network devices using DPDK-compatible driver ============================================ 0000:0a:00.0 '82599ES 10-Gigabit' drv=igb_uio unused=