[dpdk-dev] [PATCH 2/3] i40evf: support I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX in i40e VF PMD

Thomas Monjalon thomas.monjalon at 6wind.com
Sat Aug 30 16:52:04 CEST 2014


2014-08-20 11:33, Helin Zhang:
> To support configurable CRC in VF, use operation of
> I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX to carry more
> information from VM to PF host, if the peer is DPDK
> PF host. Otherwise assume it is Linux PF host and
> just use operation of I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES.
[...]
> +/* It configures VSI queues to co-work with Linux PF host */
>  static int
> -i40evf_configure_queues(struct rte_eth_dev *dev)
> +i40evf_configure_vsi_queues(struct rte_eth_dev *dev)
>  {
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
> -	struct i40e_virtchnl_vsi_queue_config_info *queue_info;
> -	struct i40e_virtchnl_queue_pair_info *queue_cfg;
>  	struct i40e_rx_queue **rxq =
>  		(struct i40e_rx_queue **)dev->data->rx_queues;
>  	struct i40e_tx_queue **txq =
>  		(struct i40e_tx_queue **)dev->data->tx_queues;
> -	int i, len, nb_qpairs, num_rxq, num_txq;
> -	int err;
> +	struct i40e_virtchnl_vsi_queue_config_info *vc_vqci;
> +	struct i40e_virtchnl_queue_pair_info *vc_qpi;
>  	struct vf_cmd_info args;
> -	struct rte_pktmbuf_pool_private *mbp_priv;
> -
> -	nb_qpairs = vf->num_queue_pairs;
> -	len = sizeof(*queue_info) + sizeof(*queue_cfg) * nb_qpairs;
> -	queue_info = rte_zmalloc("queue_info", len, 0);
> -	if (queue_info == NULL) {
> -		PMD_INIT_LOG(ERR, "failed alloc memory for queue_info\n");
> -		return -1;
> +	int size, i, nb_qp, ret;
> +
> +	nb_qp = vf->num_queue_pairs;
> +	size = sizeof(struct i40e_virtchnl_vsi_queue_config_info) +
> +		sizeof(struct i40e_virtchnl_queue_pair_info) * nb_qp;
> +	vc_vqci = rte_zmalloc("queue_info", size, 0);
> +	if (!vc_vqci) {
> +		PMD_DRV_LOG(ERR, "Failed to allocate memory for VF "
> +					"configuring queues\n");
> +		return -ENOMEM;
>  	}
> -	queue_info->vsi_id = vf->vsi_res->vsi_id;
> -	queue_info->num_queue_pairs = nb_qpairs;
> -	queue_cfg = queue_info->qpair;
> -
> -	num_rxq = dev->data->nb_rx_queues;
> -	num_txq = dev->data->nb_tx_queues;
> -	/*
> -	 * PF host driver required to configure queues in pairs, which means
> -	 * rxq_num should equals to txq_num. The actual usage won't always
> -	 * work that way. The solution is fills 0 with HW ring option in case
> -	 * they are not equal.
> -	 */
> -	for (i = 0; i < nb_qpairs; i++) {
> -		/*Fill TX info */
> -		queue_cfg->txq.vsi_id = queue_info->vsi_id;
> -		queue_cfg->txq.queue_id = i;
> -		if (i < num_txq) {
> -			queue_cfg->txq.ring_len = txq[i]->nb_tx_desc;
> -			queue_cfg->txq.dma_ring_addr = txq[i]->tx_ring_phys_addr;
> -		} else {
> -			queue_cfg->txq.ring_len = 0;
> -			queue_cfg->txq.dma_ring_addr = 0;
> +	vc_vqci->vsi_id = vf->vsi_res->vsi_id;
> +	vc_vqci->num_queue_pairs = nb_qp;
> +
> +	for (i = 0, vc_qpi = vc_vqci->qpair; i < nb_qp; i++, vc_qpi++) {
> +		vc_qpi->txq.vsi_id = vc_vqci->vsi_id;
> +		vc_qpi->txq.queue_id = i;
> +		if (i < dev->data->nb_tx_queues) {
> +			vc_qpi->txq.ring_len = txq[i]->nb_tx_desc;
> +			vc_qpi->txq.dma_ring_addr = txq[i]->tx_ring_phys_addr;
>  		}
>  
> -		/* Fill RX info */
> -		queue_cfg->rxq.vsi_id = queue_info->vsi_id;
> -		queue_cfg->rxq.queue_id = i;
> -		queue_cfg->rxq.max_pkt_size = vf->max_pkt_len;
> -		if (i < num_rxq) {
> +		vc_qpi->rxq.vsi_id = vc_vqci->vsi_id;
> +		vc_qpi->rxq.queue_id = i;
> +		vc_qpi->rxq.max_pkt_size = vf->max_pkt_len;
> +		if (i < dev->data->nb_rx_queues) {
> +			struct rte_pktmbuf_pool_private *mbp_priv;
> +
> +			vc_qpi->rxq.ring_len = rxq[i]->nb_rx_desc;
> +			vc_qpi->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;
>  			mbp_priv = rte_mempool_get_priv(rxq[i]->mp);
> -			queue_cfg->rxq.databuffer_size = mbp_priv->mbuf_data_room_size -
> -						   RTE_PKTMBUF_HEADROOM;;
> -			queue_cfg->rxq.ring_len = rxq[i]->nb_rx_desc;
> -			queue_cfg->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;;
> -		} else {
> -			queue_cfg->rxq.ring_len = 0;
> -			queue_cfg->rxq.dma_ring_addr = 0;
> -			queue_cfg->rxq.databuffer_size = 0;
> +			vc_qpi->rxq.databuffer_size =
> +				mbp_priv->mbuf_data_room_size -
> +					RTE_PKTMBUF_HEADROOM;
>  		}
> -		queue_cfg++;
>  	}

It's not clear why you reworked the legacy function.
Please explain it in the commit log and move renamings in a separated patch.

Thanks
-- 
Thomas


More information about the dev mailing list