[dpdk-dev] [PATCH v3 0/3] enhance TX checksum command and csum forwarding engine

Jijiang Liu jijiang.liu at intel.com
Wed Dec 10 02:03:20 CET 2014


In the current codes, the "tx_checksum set (ip|udp|tcp|sctp|vxlan) (hw|sw) (port-id)" command is not easy to understand and extend, so the patch set enhances the tx_checksum command and reworks csum forwarding engine due to the change of tx_checksum command. 
The main changes of the tx_checksum command are listed below,

1> add "tx_checksum set tunnel (hw|sw|none) (port-id)" command

The command is used to set/clear tunnel flag that is used to tell the NIC that the packetg is a tunneing packet and application want hardware TX checksum offload for outer layer, or inner layer, or both.

The 'none' option means that user treat tunneling packet as ordinary packet when using the csum forward engine.
for example, let say we have a tunnel packet: eth_hdr_out/ipv4_hdr_out/udp_hdr_out/vxlan_hdr/ehtr_hdr_in/ipv4_hdr_in/tcp_hdr_in. one of several scenarios:

1) User requests HW offload for ipv4_hdr_out  checksum, and doesn't care is it a tunnelled packet or not. So he sets:

tx_checksum set tunnel none 0

tx_checksum set ip hw 0

So for such case we should set tx_tunnel to 'none'.

2> add "tx_checksum set outer-ip (hw|sw) (port-id)" command

The command is used to set/clear outer IP flag that is used to tell the NIC that application want hardware offload for outer layer.

3> remove the 'vxlan' option from the  "tx_checksum set (ip|udp|tcp|sctp|vxlan) (hw|sw) (port-id)" command

The command is used to set IP, UDP, TCP and SCTP TX checksum flag. In the case of tunneling packet, the IP, UDP, TCP and SCTP flags always concern inner layer.
 
Moreover, replace the TESTPMD_TX_OFFLOAD_VXLAN_CKSUM flag with TESTPMD_TX_OFFLOAD_TUNNEL_CKSUM flag and add the TESTPMD_TX_OFFLOAD_OUTER_IP_CKSUM and TESTPMD_TX_OFFLOAD_NON_TUNNEL_CKSUM flag in test-pmd application.

v2 change:
     redefine the 'none' behaviour for "tx_checksum set tunnel (hw|sw|none) (port-id)" command.
v3 change:
     typo correction in cmdline help 

Jijiang Liu (3):
  add outer IP offload capability in librte_ether.
  add outer IP checksum capability in i40e PMD
  testpmd command lines of the tx_checksum and csum forwarding rework

 app/test-pmd/cmdline.c            |  201 +++++++++++++++++++++++++++++++++++--
 app/test-pmd/csumonly.c           |   35 ++++---
 app/test-pmd/testpmd.h            |    6 +-
 lib/librte_ether/rte_ethdev.h     |    1 +
 lib/librte_pmd_i40e/i40e_ethdev.c |    3 +-
 5 files changed, 218 insertions(+), 28 deletions(-)

-- 
1.7.7.6



More information about the dev mailing list