[dpdk-dev] NUMA CPU Sockets and DPDK

[François-Frédéric Ozog]

Hi Prashant,

May be you could monitor RAM, QPI and PCIe activity with
http://software.intel.com/en-us/articles/intel-performance-counter-monitor-a
-better-way-to-measure-cpu-utilization

It may ease investigating the issue.

François-Frédéric
 

> -----Message d'origine-----
> De : dev [mailto:dev-bounces at dpdk.org] De la part de Prashant Upadhyaya
> Envoyé : mercredi 12 février 2014 13:03
> À : Etai Lev Ran
> Cc : dev at dpdk.org
> Objet : Re: [dpdk-dev] NUMA CPU Sockets and DPDK
> 
> Hi Etai,
> 
> Ofcourse all DPDK threads consume 100 % (unless some waits are introduced
> for some power saving etc., all typical DPDK threads are while(1) loops)
> When I said core 1 is unusually busy, I meant to say that it is not able
to
> read beyond 2 Gbps or so and the packets are dropping at NIC.
> (I have my own custom way of calculating the cpu utilization of core 1
> based on how many empty polls were done and how many polls got me data
> which I then process) On the 8 core machine with single socket, the core 1
> was being able to lift successfully much higher data rates, hence the
> question.
> 
> Regards
> -Prashant
> 
> 
> -----Original Message-----
> From: Etai Lev Ran [mailto:elevran at gmail.com]
> Sent: Wednesday, February 12, 2014 5:18 PM
> To: Prashant Upadhyaya
> Cc: dev at dpdk.org
> Subject: RE: [dpdk-dev] NUMA CPU Sockets and DPDK
> 
> Hi Prashant,
> 
> Based on our experience, using DPDK cross CPU sockets may indeed result in
> some performance degradation (~10% for our application vs. staying in
> socket. YMMV based on HW, application structure, etc.).
> 
> Regarding CPU utilization on core 1, the one picking up traffic: perhaps I
> had misunderstood your comment, but I would expect it to always be close
to
> 100% since it's  polling the device via the PMD and not driven by
> interrupts.
> 
> Regards,
> Etai
> 
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Prashant Upadhyaya
> Sent: Wednesday, February 12, 2014 1:28 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] NUMA CPU Sockets and DPDK
> 
> Hi guys,
> 
> What has been your experience of using DPDK based app's in NUMA mode with
> multiple sockets where some cores are present on one socket and other
cores
> on some other socket.
> 
> I am migrating my application from one intel machine with 8 cores, all in
> one socket to a 32 core machine where 16 cores are in one socket and 16
> other cores in the second socket.
> My core 0 does all initialization for mbuf's, nic ports, queues etc. and
> uses SOCKET_ID_ANY for socket related parameters.
> 
> The usecase works, but I think I am running into performance issues on the
> 32 core machine.
> The lscpu output on my 32 core machine shows the following - NUMA node0
> CPU(s): 0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30
> NUMA node1 CPU(s): 1,3,5,7,9,11,13,15,17,19,21,23,25,27,29,31
> I am using core 1 to lift all the data from a single queue of an 82599EB
> port and I see that the cpu utilization for this core 1 is way too high
> even for lifting traffic of 1 Gbps with packet size of 650 bytes.
> 
> In general, does one need to be careful in working with multiple sockets
> and so forth, any comments would be helpful.
> 
> Regards
> -Prashant
> 
> 
> 
> 
> 
>
===========================================================================
> =
> ===
> Please refer to http://www.aricent.com/legal/email_disclaimer.html
> for important disclosures regarding this electronic communication.
>
===========================================================================
> =
> ===
> 
> 
> 
> 
> 
>
===========================================================================
> ====
> Please refer to http://www.aricent.com/legal/email_disclaimer.html
> for important disclosures regarding this electronic communication.
>
===========================================================================
> ====