[dpdk-dev] Error while compiling DPDK

[BYEONG-GI KIM]

Dear Choi,

Of course I used "export RTE_TARGET=x86_64-default-linuxapp-gcc" when I was
trying to compile it.

By the way, the compilation went off to one more step, there was another
error message though;

== Build lib/librte_eal/linuxapp/kni
  LD
 /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/built-in.o
  CC [M]
 /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o
/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.c:
In function 'ixgbe_del_mac_filter':
/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.c:525:3:
error: implicit declaration of function 'compare_ether_addr'
[-Werror=implicit-function-declaration]
   if (!compare_ether_addr(addr, adapter->mac_table[i].addr) &&
   ^
cc1: all warnings being treated as errors
make[10]: ***
[/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o]
Error 1
make[9]: ***
[_module_/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni]
Error 2
make[8]: *** [sub-make] Error 2
make[7]: *** [rte_kni.ko] Error 2
make[6]: *** [kni] Error 2
make[5]: *** [linuxapp] Error 2
make[4]: *** [librte_eal] Error 2
make[3]: *** [lib] Error 2
make[2]: *** [all] Error 2
make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2
make: *** [install] Error 2

Honestly, I've never been able to compile DPDK successfully... I had been
trying to compile it on CentOS 6.5, and was failed. Then I changed OS from
CentOS to Fedora, but there are still lots of errors.

Best regards

Byeong-Gi KIM


2014-07-14 13:32 GMT+09:00 Choi, Sy Jong <sy.jong.choi at intel.com>:

>  Hi Mr. Kim,
>
>
>
> If you are compiling x86_64-default-linuxapp-gcc
>
> The RTE_TARGET=x86_64-default-linuxapp-gcc
>
>
>
> I have manage to compile DPDK r1.6.0 with the following OS and kernel
> version
>
> CentOS with customer kernel
>
> Linux localhost.localdomain 3.3.1 #1 SMP Tue Jan 7 22:44:17 MYT 2014
> x86_64 x86_64 x86_64 GNU/Linux
>
>
>
> Ubuntu 14.04
>
> Linux choi-desktop 3.13.0-30-generic #55-Ubuntu SMP Fri Jul 4 21:40:53 UTC
> 2014 x86_64 x86_64 x86_64 GNU/Linux
>
>
>
> May I know, have you been able to compile DPDK previously?
>
>
>
> Regards,
>
> Choi, Sy Jong
>
> Platform Application Engineer
>
>
>
> *From:* BYEONG-GI KIM [mailto:kimbyeonggi at gmail.com]
> *Sent:* Monday, July 14, 2014 11:29 AM
> *To:* Choi, Sy Jong; dev at dpdk.org; Dpdk-ovs at lists.01.org
>
> *Subject:* Re: [dpdk-dev] Error while compiling DPDK
>
>
>
> Dear Choi
>
>
>
> I used x86_64-default-linuxapp-gcc.
>
>
>
> I also checked x86_64-native-linuxapp-gcc after exporting
>  RTE_TARGET=x86_64-native-linuxapp-gcc, but there was a message "make[1]:
> Nothing to be done for `install'." while trying to install it.
>
>
>
> Best regards
>
>
>
> Byeong-Gi KIM
>
>
>
> 2014-07-14 11:40 GMT+09:00 Choi, Sy Jong <sy.jong.choi at intel.com>:
>
> Hi Mr. Kim,
>
> May confirm which environment are you using?
> x86_64-default-linuxapp-gcc or
> x86_64-native-linuxapp-gcc
>
>
>
>
>
> Regards,
> Choi, Sy Jong
>
> -----Original Message-----
>
> *From: *BYEONG-GI KIM [kimbyeonggi at gmail.com]
> *Sent: *Monday, July 14, 2014 10:05 AM Malay Peninsula Standard Time
> *To: *Masaru Oki; dev at dpdk.org; Dpdk-ovs at lists.01.org
> *Subject: *Re: [dpdk-dev] Error while compiling DPDK
>
> Here is the error message in English;
>
> == Build lib/librte_eal/linuxapp
> == Build lib/librte_eal/linuxapp/igb_uio
>   LD
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
>   CC [M]
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
>   Building modules, stage 2.
>   MODPOST 1 modules
>   CC
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
>   LD [M]
>
>  /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
> INSTALL-MODULE igb_uio.ko
> == Build lib/librte_eal/linuxapp/eal
>   CC eal.o
> gcc: error: –g: No such file or directory
> make[7]: *** [eal.o] Error 1
> make[6]: *** [eal] Error 2
> make[5]: *** [linuxapp] Error 2
> make[4]: *** [librte_eal] Error 2
> make[3]: *** [lib] Error 2
> make[2]: *** [all] Error 2
> make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2
> make: *** [install] Error 2
>
>
>
> 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki at stratosphere.co.jp>:
>
> > > I'm sorry for the Korean characteristics. It was shown because My
> Fedora
> > OS
> > > is set to use Korean as a default language.
> >
> > Try env LANG=C make install ...
> >
> >
> > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi at gmail.com>:
> >
> >> Dear choi,
> >>
> >> Thank you for the reply.
> >>
> >> I've been trying to install DPDK while changing the command as you
> >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was
> still
> >> shown;
> >>
> >>
> >> [root at compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc
> >> ================== Installing x86_64-default-linuxapp-gcc
> >> Configuration done
> >> == Build scripts
> >> == Build scripts/testhost
> >>   HOSTCC testhost.o
> >>   HOSTLD testhost
> >>   INSTALL-HOSTAPP testhost
> >> == Build lib
> >> == Build lib/librte_eal
> >> == Build lib/librte_eal/common
> >>   SYMLINK-FILE include/rte_atomic.h
> >>   SYMLINK-FILE include/rte_branch_prediction.h
> >>   SYMLINK-FILE include/rte_byteorder.h
> >>   SYMLINK-FILE include/rte_common.h
> >>   SYMLINK-FILE include/rte_cycles.h
> >>   SYMLINK-FILE include/rte_debug.h
> >>   SYMLINK-FILE include/rte_eal.h
> >>   SYMLINK-FILE include/rte_errno.h
> >>   SYMLINK-FILE include/rte_launch.h
> >>   SYMLINK-FILE include/rte_lcore.h
> >>   SYMLINK-FILE include/rte_log.h
> >>   SYMLINK-FILE include/rte_memcpy.h
> >>   SYMLINK-FILE include/rte_memory.h
> >>   SYMLINK-FILE include/rte_memzone.h
> >>   SYMLINK-FILE include/rte_pci.h
> >>   SYMLINK-FILE include/rte_pci_dev_ids.h
> >>   SYMLINK-FILE include/rte_per_lcore.h
> >>   SYMLINK-FILE include/rte_prefetch.h
> >>   SYMLINK-FILE include/rte_random.h
> >>   SYMLINK-FILE include/rte_rwlock.h
> >>   SYMLINK-FILE include/rte_spinlock.h
> >>   SYMLINK-FILE include/rte_tailq.h
> >>   SYMLINK-FILE include/rte_interrupts.h
> >>   SYMLINK-FILE include/rte_alarm.h
> >>   SYMLINK-FILE include/rte_string_fns.h
> >>   SYMLINK-FILE include/rte_cpuflags.h
> >>   SYMLINK-FILE include/rte_version.h
> >>   SYMLINK-FILE include/rte_tailq_elem.h
> >>   SYMLINK-FILE include/rte_eal_memconfig.h
> >>   SYMLINK-FILE include/rte_malloc_heap.h
> >>   SYMLINK-FILE include/rte_hexdump.h
> >>   SYMLINK-FILE include/arch/rte_atomic.h
> >> == Build lib/librte_eal/linuxapp
> >> == Build lib/librte_eal/linuxapp/igb_uio
> >>   LD
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
> >>   CC [M]
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
> >>   Building modules, stage 2.
> >>   MODPOST 1 modules
> >>   CC
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
> >>   LD [M]
> >>
> >>
> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
> >> INSTALL-MODULE igb_uio.ko
> >> == Build lib/librte_eal/linuxapp/eal
> >>   CC eal.o
> >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다
> >> make[7]: *** [eal.o] 오류 1
> >> make[6]: *** [eal] 오류 2
> >> make[5]: *** [linuxapp] 오류 2
> >> make[4]: *** [librte_eal] 오류 2
> >> make[3]: *** [lib] 오류 2
> >> make[2]: *** [all] 오류 2
> >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2
> >> make: *** [install] 오류 2
> >>
> >> I'm sorry for the Korean characteristics. It was shown because My Fedora
> >> OS
> >> is set to use Korean as a default language.
> >>
> >> I set two environmental variables following the
> >> intel-dpdk-programmers-guide.pdf as below:
> >>
> >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0
> >> export RTE_TARGET=x86_64-native-linuxapp-gcc
> >>
> >> What should I do in order to install DPDK successfully?...
> >>
> >> Thanks in advance.
> >>
> >> Best regards
> >>
> >> Byeong-Gi KIM
> >>
> >>
> >>
> >>
> >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi at intel.com>:
> >>
> >> >  Hi Mr. Kim,
> >> >
> >> > Please do not compile with "T=x86*gcc" because it will compile BSD app
> >> > too, which cause the error.
> >> >
> >> > Please complile only the configuration you need. This should remove
> the
> >> > error.
> >> >
> >> >
> >> > Regards,
> >> > Choi, Sy Jong
> >> >
> >> >
> >> > -----Original Message-----
> >> > *From: *BYEONG-GI KIM [kimbyeonggi at gmail.com]
> >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time
> >> > *To: *Dpdk-ovs at lists.01.org; dev at dpdk.org
> >> > *Subject: *[dpdk-dev] Error while compiling DPDK
> >>
> >> >
> >> > Hello.
> >> >
> >> > An error occured while compiling DPDK 1.6.0r2 as below:
> >> >
> >> > [root at compute dpdk-1.6.0r2]# make install T=x86_64*gcc
> >> > ...Installing...
> >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function
> >> > ‘rte_eal_init’:
> >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error:
> >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type
> >> > ‘pthread_t’ [-Werror=format=]
> >> >   RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n",
> >> >   ^
> >> >
> >> > The current OS is Fedora20. What should I do?...
> >> >
> >> > Best regards
> >> >
> >> > Byeong-Gi KIM
> >> >
> >>
> >
> >
>
>
>