[dpdk-dev] [PATCH v2] ethdev: Rename RX/TX enable queue field for queue start and stop
Ouyang Changchun
changchun.ouyang at intel.com
Wed Jul 23 06:48:27 CEST 2014
Update comments for the field start_rx_per_q for better readability.
Rename the field name to rx_enable_queue for better readability too.
Accordingly Update its reference in sample vhost.
Signed-off-by: Changchun Ouyang <changchun.ouyang at intel.com>
---
examples/vhost/main.c | 4 ++--
lib/librte_ether/rte_ethdev.h | 16 ++++++++++++++--
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 8 ++++----
lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 4 ++--
4 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 193aa25..2eea431 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -2984,9 +2984,9 @@ MAIN(int argc, char *argv[])
char pool_name[RTE_MEMPOOL_NAMESIZE];
char ring_name[RTE_MEMPOOL_NAMESIZE];
- rx_conf_default.start_rx_per_q = (uint8_t)zero_copy;
+ rx_conf_default.rx_enable_queue = (uint8_t)zero_copy;
rx_conf_default.rx_drop_en = 0;
- tx_conf_default.start_tx_per_q = (uint8_t)zero_copy;
+ tx_conf_default.tx_enable_queue = (uint8_t)zero_copy;
nb_mbuf = num_rx_descriptor
+ num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ num_switching_cores * MAX_PKT_BURST;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 50df654..ba439f6 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -604,7 +604,16 @@ struct rte_eth_rxconf {
struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
- uint8_t start_rx_per_q; /**< start rx per queue. */
+ /**< If rx_enable_queue is true, rte_eth_dev_rx_queue_start should be
+ invocated to start RX for one queue after rte_eth_dev_start is
+ invocated, and rte_eth_dev_rx_queue_start instead of
+ rte_eth_dev_start is responsible for allocating mbuf from
+ mempool and setup the DMA physical address. It is useful in
+ such scenario: buffer address is not available at the point of
+ rte_eth_dev_start's invocating but available later, e.g. in
+ VHOST zero copy case, the buffer address used to setup DMA
+ address is available only after one VM(guest) startup. */
+ uint8_t rx_enable_queue;
};
#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
@@ -625,7 +634,10 @@ struct rte_eth_txconf {
uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
uint16_t tx_free_thresh; /**< Drives the freeing of TX buffers. */
uint32_t txq_flags; /**< Set flags for the Tx queue */
- uint8_t start_tx_per_q; /**< start tx per queue. */
+ /**< If tx_enable_queue is true, rte_eth_dev_tx_queue_start must be
+ invocated to start TX for one queue after rte_eth_dev_start is
+ invocated. Refer to start_rx_per_q for the use case. */
+ uint8_t tx_enable_queue;
};
/**
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index dfc2076..2872fad 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1846,7 +1846,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
txq->port_id = dev->data->port_id;
txq->txq_flags = tx_conf->txq_flags;
txq->ops = &def_txq_ops;
- txq->start_tx_per_q = tx_conf->start_tx_per_q;
+ txq->tx_enable_queue = tx_conf->tx_enable_queue;
/*
* Modification to set VFTDT for virtual function if vf is detected
@@ -2091,7 +2091,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
0 : ETHER_CRC_LEN);
rxq->drop_en = rx_conf->rx_drop_en;
- rxq->start_rx_per_q = rx_conf->start_rx_per_q;
+ rxq->rx_enable_queue = rx_conf->rx_enable_queue;
/*
* Allocate RX ring hardware descriptors. A memzone large enough to
@@ -3652,13 +3652,13 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
for (i = 0; i < dev->data->nb_tx_queues; i++) {
txq = dev->data->tx_queues[i];
- if (!txq->start_tx_per_q)
+ if (!txq->tx_enable_queue)
ixgbe_dev_tx_queue_start(dev, i);
}
for (i = 0; i < dev->data->nb_rx_queues; i++) {
rxq = dev->data->rx_queues[i];
- if (!rxq->start_rx_per_q)
+ if (!rxq->rx_enable_queue)
ixgbe_dev_rx_queue_start(dev, i);
}
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
index 64c0695..d6d856e 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
@@ -135,7 +135,7 @@ struct igb_rx_queue {
uint8_t port_id; /**< Device port identifier. */
uint8_t crc_len; /**< 0 if CRC stripped, 4 otherwise. */
uint8_t drop_en; /**< If not 0, set SRRCTL.Drop_En. */
- uint8_t start_rx_per_q;
+ uint8_t rx_enable_queue;
#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
/** need to alloc dummy mbuf, for wraparound when scanning hw ring */
struct rte_mbuf fake_mbuf;
@@ -200,7 +200,7 @@ struct igb_tx_queue {
/** Hardware context0 history. */
struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM];
struct ixgbe_txq_ops *ops; /**< txq ops */
- uint8_t start_tx_per_q;
+ uint8_t tx_enable_queue;
};
struct ixgbe_txq_ops {
--
1.8.4.2
More information about the dev
mailing list