[dpdk-dev] [PATCH 2/3] config: rename "default" configuration file as "native"
David Marchand
david.marchand at 6wind.com
Wed May 14 16:58:08 CEST 2014
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand at 6wind.com>
---
config/defconfig_i686-default-linuxapp-gcc | 68 -------------------
config/defconfig_i686-default-linuxapp-icc | 68 -------------------
config/defconfig_i686-native-linuxapp-gcc | 68 +++++++++++++++++++
config/defconfig_i686-native-linuxapp-icc | 68 +++++++++++++++++++
config/defconfig_x86_64-default-bsdapp-gcc | 71 --------------------
config/defconfig_x86_64-default-linuxapp-gcc | 63 -----------------
config/defconfig_x86_64-default-linuxapp-icc | 63 -----------------
config/defconfig_x86_64-ivshmem-linuxapp-gcc | 2 +-
config/defconfig_x86_64-ivshmem-linuxapp-icc | 2 +-
config/defconfig_x86_64-native-bsdapp-gcc | 71 ++++++++++++++++++++
config/defconfig_x86_64-native-linuxapp-gcc | 63 +++++++++++++++++
config/defconfig_x86_64-native-linuxapp-icc | 63 +++++++++++++++++
doc/build-sdk-quick.txt | 2 +-
examples/cmdline/Makefile | 2 +-
examples/dpdk_qat/Makefile | 2 +-
examples/exception_path/Makefile | 2 +-
examples/helloworld/Makefile | 2 +-
examples/ip_reassembly/Makefile | 2 +-
examples/ipv4_frag/Makefile | 2 +-
examples/ipv4_multicast/Makefile | 2 +-
examples/kni/Makefile | 2 +-
examples/l2fwd/Makefile | 2 +-
examples/l3fwd-power/Makefile | 2 +-
examples/l3fwd-vf/Makefile | 2 +-
examples/l3fwd/Makefile | 2 +-
examples/link_status_interrupt/Makefile | 2 +-
examples/load_balancer/Makefile | 2 +-
.../client_server_mp/mp_server/Makefile | 2 +-
examples/multi_process/l2fwd_fork/Makefile | 2 +-
examples/multi_process/simple_mp/Makefile | 2 +-
examples/multi_process/symmetric_mp/Makefile | 2 +-
examples/netmap_compat/bridge/Makefile | 2 +-
examples/qos_meter/Makefile | 2 +-
examples/qos_sched/Makefile | 2 +-
examples/quota_watermark/Makefile | 2 +-
examples/quota_watermark/qw/Makefile | 2 +-
examples/quota_watermark/qwctl/Makefile | 2 +-
examples/timer/Makefile | 2 +-
examples/vhost/Makefile | 2 +-
examples/vhost_xen/Makefile | 2 +-
examples/vmdq/Makefile | 2 +-
examples/vmdq_dcb/Makefile | 2 +-
mk/rte.sdkinstall.mk | 2 +-
mk/rte.sdkroot.mk | 2 +-
mk/rte.sdktestall.mk | 2 +-
pkg/dpdk-core.spec | 2 +-
scripts/test-framework.sh | 2 +-
47 files changed, 370 insertions(+), 370 deletions(-)
delete mode 100644 config/defconfig_i686-default-linuxapp-gcc
delete mode 100644 config/defconfig_i686-default-linuxapp-icc
create mode 100644 config/defconfig_i686-native-linuxapp-gcc
create mode 100644 config/defconfig_i686-native-linuxapp-icc
delete mode 100644 config/defconfig_x86_64-default-bsdapp-gcc
delete mode 100644 config/defconfig_x86_64-default-linuxapp-gcc
delete mode 100644 config/defconfig_x86_64-default-linuxapp-icc
create mode 100644 config/defconfig_x86_64-native-bsdapp-gcc
create mode 100644 config/defconfig_x86_64-native-linuxapp-gcc
create mode 100644 config/defconfig_x86_64-native-linuxapp-icc
diff --git a/config/defconfig_i686-default-linuxapp-gcc b/config/defconfig_i686-default-linuxapp-gcc
deleted file mode 100644
index 8bb5c5a..0000000
--- a/config/defconfig_i686-default-linuxapp-gcc
+++ /dev/null
@@ -1,68 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#include "common_linuxapp"
-
-#
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE can be:
-# default nothing specific
-# native current machine
-# atm Intel® Atom™ microarchitecture
-# nhm Intel® microarchitecture code name Nehalem
-# wsm Intel® microarchitecture code name Westmere
-# snb Intel® microarchitecture code name Sandy Bridge
-# ivb Intel® microarchitecture code name Ivy Bridge
-#
-# Note: if your compiler does not support the relevant -march options,
-# it will be compiled with whatever latest processor the compiler supports!
-#
-CONFIG_RTE_MACHINE="native"
-
-#
-# define the architecture we compile for.
-# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
-#
-CONFIG_RTE_ARCH="i686"
-CONFIG_RTE_ARCH_I686=y
-
-#
-# The compiler we use.
-# Can be gcc or icc.
-#
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
-
-#
-# KNI is not supported on 32-bit
-#
-CONFIG_RTE_LIBRTE_KNI=n
diff --git a/config/defconfig_i686-default-linuxapp-icc b/config/defconfig_i686-default-linuxapp-icc
deleted file mode 100644
index e030246..0000000
--- a/config/defconfig_i686-default-linuxapp-icc
+++ /dev/null
@@ -1,68 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#include "common_linuxapp"
-
-#
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE can be:
-# default nothing specific
-# native current machine
-# atm Intel® Atom™ microarchitecture
-# nhm Intel® microarchitecture code name Nehalem
-# wsm Intel® microarchitecture code name Westmere
-# snb Intel® microarchitecture code name Sandy Bridge
-# ivb Intel® microarchitecture code name Ivy Bridge
-#
-# Note: if your compiler does not support the relevant -march options,
-# it will be compiled with whatever latest processor the compiler supports!
-#
-CONFIG_RTE_MACHINE="native"
-
-#
-# define the architecture we compile for.
-# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
-#
-CONFIG_RTE_ARCH="i686"
-CONFIG_RTE_ARCH_I686=y
-
-#
-# The compiler we use.
-# Can be gcc or icc.
-#
-CONFIG_RTE_TOOLCHAIN="icc"
-CONFIG_RTE_TOOLCHAIN_ICC=y
-
-#
-# KNI is not supported on 32-bit
-#
-CONFIG_RTE_LIBRTE_KNI=n
diff --git a/config/defconfig_i686-native-linuxapp-gcc b/config/defconfig_i686-native-linuxapp-gcc
new file mode 100644
index 0000000..8bb5c5a
--- /dev/null
+++ b/config/defconfig_i686-native-linuxapp-gcc
@@ -0,0 +1,68 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "common_linuxapp"
+
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE can be:
+# default nothing specific
+# native current machine
+# atm Intel® Atom™ microarchitecture
+# nhm Intel® microarchitecture code name Nehalem
+# wsm Intel® microarchitecture code name Westmere
+# snb Intel® microarchitecture code name Sandy Bridge
+# ivb Intel® microarchitecture code name Ivy Bridge
+#
+# Note: if your compiler does not support the relevant -march options,
+# it will be compiled with whatever latest processor the compiler supports!
+#
+CONFIG_RTE_MACHINE="native"
+
+#
+# define the architecture we compile for.
+# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
+#
+CONFIG_RTE_ARCH="i686"
+CONFIG_RTE_ARCH_I686=y
+
+#
+# The compiler we use.
+# Can be gcc or icc.
+#
+CONFIG_RTE_TOOLCHAIN="gcc"
+CONFIG_RTE_TOOLCHAIN_GCC=y
+
+#
+# KNI is not supported on 32-bit
+#
+CONFIG_RTE_LIBRTE_KNI=n
diff --git a/config/defconfig_i686-native-linuxapp-icc b/config/defconfig_i686-native-linuxapp-icc
new file mode 100644
index 0000000..e030246
--- /dev/null
+++ b/config/defconfig_i686-native-linuxapp-icc
@@ -0,0 +1,68 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "common_linuxapp"
+
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE can be:
+# default nothing specific
+# native current machine
+# atm Intel® Atom™ microarchitecture
+# nhm Intel® microarchitecture code name Nehalem
+# wsm Intel® microarchitecture code name Westmere
+# snb Intel® microarchitecture code name Sandy Bridge
+# ivb Intel® microarchitecture code name Ivy Bridge
+#
+# Note: if your compiler does not support the relevant -march options,
+# it will be compiled with whatever latest processor the compiler supports!
+#
+CONFIG_RTE_MACHINE="native"
+
+#
+# define the architecture we compile for.
+# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
+#
+CONFIG_RTE_ARCH="i686"
+CONFIG_RTE_ARCH_I686=y
+
+#
+# The compiler we use.
+# Can be gcc or icc.
+#
+CONFIG_RTE_TOOLCHAIN="icc"
+CONFIG_RTE_TOOLCHAIN_ICC=y
+
+#
+# KNI is not supported on 32-bit
+#
+CONFIG_RTE_LIBRTE_KNI=n
diff --git a/config/defconfig_x86_64-default-bsdapp-gcc b/config/defconfig_x86_64-default-bsdapp-gcc
deleted file mode 100644
index b131dea..0000000
--- a/config/defconfig_x86_64-default-bsdapp-gcc
+++ /dev/null
@@ -1,71 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#include "common_bsdapp"
-
-#
-# define executive environment
-#
-# CONFIG_RTE_EXEC_ENV can be linuxapp, baremetal, bsdapp
-#
-CONFIG_RTE_EXEC_ENV="bsdapp"
-CONFIG_RTE_EXEC_ENV_BSDAPP=y
-
-#
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE can be:
-# default nothing specific
-# native current machine
-# atm Intel® Atom™ microarchitecture
-# nhm Intel® microarchitecture code name Nehalem
-# wsm Intel® microarchitecture code name Westmere
-# snb Intel® microarchitecture code name Sandy Bridge
-# ivb Intel® microarchitecture code name Ivy Bridge
-#
-# Note: if your compiler does not support the relevant -march options,
-# it will be compiled with whatever latest processor the compiler supports!
-#
-CONFIG_RTE_MACHINE="native"
-
-#
-# define the architecture we compile for.
-# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
-#
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-
-#
-# The compiler we use.
-# Can be gcc or icc.
-#
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
diff --git a/config/defconfig_x86_64-default-linuxapp-gcc b/config/defconfig_x86_64-default-linuxapp-gcc
deleted file mode 100644
index 2a4ce89..0000000
--- a/config/defconfig_x86_64-default-linuxapp-gcc
+++ /dev/null
@@ -1,63 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#include "common_linuxapp"
-
-#
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE can be:
-# default nothing specific
-# native current machine
-# atm Intel® Atom™ microarchitecture
-# nhm Intel® microarchitecture code name Nehalem
-# wsm Intel® microarchitecture code name Westmere
-# snb Intel® microarchitecture code name Sandy Bridge
-# ivb Intel® microarchitecture code name Ivy Bridge
-#
-# Note: if your compiler does not support the relevant -march options,
-# it will be compiled with whatever latest processor the compiler supports!
-#
-CONFIG_RTE_MACHINE="native"
-
-#
-# define the architecture we compile for.
-# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
-#
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-
-#
-# The compiler we use.
-# Can be gcc or icc.
-#
-CONFIG_RTE_TOOLCHAIN="gcc"
-CONFIG_RTE_TOOLCHAIN_GCC=y
diff --git a/config/defconfig_x86_64-default-linuxapp-icc b/config/defconfig_x86_64-default-linuxapp-icc
deleted file mode 100644
index b2774e1..0000000
--- a/config/defconfig_x86_64-default-linuxapp-icc
+++ /dev/null
@@ -1,63 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#include "common_linuxapp"
-
-#
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE can be:
-# default nothing specific
-# native current machine
-# atm Intel® Atom™ microarchitecture
-# nhm Intel® microarchitecture code name Nehalem
-# wsm Intel® microarchitecture code name Westmere
-# snb Intel® microarchitecture code name Sandy Bridge
-# ivb Intel® microarchitecture code name Ivy Bridge
-#
-# Note: if your compiler does not support the relevant -march options,
-# it will be compiled with whatever latest processor the compiler supports!
-#
-CONFIG_RTE_MACHINE="native"
-
-#
-# define the architecture we compile for.
-# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
-#
-CONFIG_RTE_ARCH="x86_64"
-CONFIG_RTE_ARCH_X86_64=y
-
-#
-# The compiler we use.
-# Can be gcc or icc.
-#
-CONFIG_RTE_TOOLCHAIN="icc"
-CONFIG_RTE_TOOLCHAIN_ICC=y
diff --git a/config/defconfig_x86_64-ivshmem-linuxapp-gcc b/config/defconfig_x86_64-ivshmem-linuxapp-gcc
index 2f55a69..d53b8a4 100644
--- a/config/defconfig_x86_64-ivshmem-linuxapp-gcc
+++ b/config/defconfig_x86_64-ivshmem-linuxapp-gcc
@@ -34,7 +34,7 @@
# use default config
#
-#include "defconfig_x86_64-default-linuxapp-gcc"
+#include "defconfig_x86_64-native-linuxapp-gcc"
#
# Compile IVSHMEM library
diff --git a/config/defconfig_x86_64-ivshmem-linuxapp-icc b/config/defconfig_x86_64-ivshmem-linuxapp-icc
index 14f0926..3845313 100644
--- a/config/defconfig_x86_64-ivshmem-linuxapp-icc
+++ b/config/defconfig_x86_64-ivshmem-linuxapp-icc
@@ -34,7 +34,7 @@
# use default config
#
-#include "defconfig_x86_64-default-linuxapp-icc"
+#include "defconfig_x86_64-native-linuxapp-icc"
#
# Compile IVSHMEM library
diff --git a/config/defconfig_x86_64-native-bsdapp-gcc b/config/defconfig_x86_64-native-bsdapp-gcc
new file mode 100644
index 0000000..b131dea
--- /dev/null
+++ b/config/defconfig_x86_64-native-bsdapp-gcc
@@ -0,0 +1,71 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "common_bsdapp"
+
+#
+# define executive environment
+#
+# CONFIG_RTE_EXEC_ENV can be linuxapp, baremetal, bsdapp
+#
+CONFIG_RTE_EXEC_ENV="bsdapp"
+CONFIG_RTE_EXEC_ENV_BSDAPP=y
+
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE can be:
+# default nothing specific
+# native current machine
+# atm Intel® Atom™ microarchitecture
+# nhm Intel® microarchitecture code name Nehalem
+# wsm Intel® microarchitecture code name Westmere
+# snb Intel® microarchitecture code name Sandy Bridge
+# ivb Intel® microarchitecture code name Ivy Bridge
+#
+# Note: if your compiler does not support the relevant -march options,
+# it will be compiled with whatever latest processor the compiler supports!
+#
+CONFIG_RTE_MACHINE="native"
+
+#
+# define the architecture we compile for.
+# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
+#
+CONFIG_RTE_ARCH="x86_64"
+CONFIG_RTE_ARCH_X86_64=y
+
+#
+# The compiler we use.
+# Can be gcc or icc.
+#
+CONFIG_RTE_TOOLCHAIN="gcc"
+CONFIG_RTE_TOOLCHAIN_GCC=y
diff --git a/config/defconfig_x86_64-native-linuxapp-gcc b/config/defconfig_x86_64-native-linuxapp-gcc
new file mode 100644
index 0000000..2a4ce89
--- /dev/null
+++ b/config/defconfig_x86_64-native-linuxapp-gcc
@@ -0,0 +1,63 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "common_linuxapp"
+
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE can be:
+# default nothing specific
+# native current machine
+# atm Intel® Atom™ microarchitecture
+# nhm Intel® microarchitecture code name Nehalem
+# wsm Intel® microarchitecture code name Westmere
+# snb Intel® microarchitecture code name Sandy Bridge
+# ivb Intel® microarchitecture code name Ivy Bridge
+#
+# Note: if your compiler does not support the relevant -march options,
+# it will be compiled with whatever latest processor the compiler supports!
+#
+CONFIG_RTE_MACHINE="native"
+
+#
+# define the architecture we compile for.
+# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
+#
+CONFIG_RTE_ARCH="x86_64"
+CONFIG_RTE_ARCH_X86_64=y
+
+#
+# The compiler we use.
+# Can be gcc or icc.
+#
+CONFIG_RTE_TOOLCHAIN="gcc"
+CONFIG_RTE_TOOLCHAIN_GCC=y
diff --git a/config/defconfig_x86_64-native-linuxapp-icc b/config/defconfig_x86_64-native-linuxapp-icc
new file mode 100644
index 0000000..b2774e1
--- /dev/null
+++ b/config/defconfig_x86_64-native-linuxapp-icc
@@ -0,0 +1,63 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "common_linuxapp"
+
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE can be:
+# default nothing specific
+# native current machine
+# atm Intel® Atom™ microarchitecture
+# nhm Intel® microarchitecture code name Nehalem
+# wsm Intel® microarchitecture code name Westmere
+# snb Intel® microarchitecture code name Sandy Bridge
+# ivb Intel® microarchitecture code name Ivy Bridge
+#
+# Note: if your compiler does not support the relevant -march options,
+# it will be compiled with whatever latest processor the compiler supports!
+#
+CONFIG_RTE_MACHINE="native"
+
+#
+# define the architecture we compile for.
+# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
+#
+CONFIG_RTE_ARCH="x86_64"
+CONFIG_RTE_ARCH_X86_64=y
+
+#
+# The compiler we use.
+# Can be gcc or icc.
+#
+CONFIG_RTE_TOOLCHAIN="icc"
+CONFIG_RTE_TOOLCHAIN_ICC=y
diff --git a/doc/build-sdk-quick.txt b/doc/build-sdk-quick.txt
index 8989a32..84947cf 100644
--- a/doc/build-sdk-quick.txt
+++ b/doc/build-sdk-quick.txt
@@ -1,5 +1,5 @@
Basic build
- make config T=x86_64-default-linuxapp-gcc && make
+ make config T=x86_64-native-linuxapp-gcc && make
Build commands
config get configuration from target template (T=)
all same as build (default rule)
diff --git a/examples/cmdline/Makefile b/examples/cmdline/Makefile
index 8412131..1033967 100644
--- a/examples/cmdline/Makefile
+++ b/examples/cmdline/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/dpdk_qat/Makefile b/examples/dpdk_qat/Makefile
index d94b41a..4dd12b5 100644
--- a/examples/dpdk_qat/Makefile
+++ b/examples/dpdk_qat/Makefile
@@ -38,7 +38,7 @@ $(error "Please define ICP_ROOT environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/exception_path/Makefile b/examples/exception_path/Makefile
index de99538..3959130 100644
--- a/examples/exception_path/Makefile
+++ b/examples/exception_path/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/helloworld/Makefile b/examples/helloworld/Makefile
index 05e81e6..b215a00 100644
--- a/examples/helloworld/Makefile
+++ b/examples/helloworld/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile
index 5a645da..3115b95 100644
--- a/examples/ip_reassembly/Makefile
+++ b/examples/ip_reassembly/Makefile
@@ -35,7 +35,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ipv4_frag/Makefile b/examples/ipv4_frag/Makefile
index 97fa452..5fc4d9e 100644
--- a/examples/ipv4_frag/Makefile
+++ b/examples/ipv4_frag/Makefile
@@ -35,7 +35,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile
index f76f8d8..f2ec731 100644
--- a/examples/ipv4_multicast/Makefile
+++ b/examples/ipv4_multicast/Makefile
@@ -35,7 +35,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/kni/Makefile b/examples/kni/Makefile
index 2c8aea3..de10088 100644
--- a/examples/kni/Makefile
+++ b/examples/kni/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile
index e0ba282..06dff0d 100644
--- a/examples/l2fwd/Makefile
+++ b/examples/l2fwd/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-power/Makefile b/examples/l3fwd-power/Makefile
index 5cc8ede..cd00cba 100644
--- a/examples/l3fwd-power/Makefile
+++ b/examples/l3fwd-power/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-vf/Makefile b/examples/l3fwd-vf/Makefile
index 1ecf5b0..974d6b7 100644
--- a/examples/l3fwd-vf/Makefile
+++ b/examples/l3fwd-vf/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile
index 5811f60..3824a89 100644
--- a/examples/l3fwd/Makefile
+++ b/examples/l3fwd/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile
index d69e8a8..d3b8c17 100644
--- a/examples/link_status_interrupt/Makefile
+++ b/examples/link_status_interrupt/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/load_balancer/Makefile b/examples/load_balancer/Makefile
index 4fe0625..c532e8b 100644
--- a/examples/load_balancer/Makefile
+++ b/examples/load_balancer/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/client_server_mp/mp_server/Makefile b/examples/multi_process/client_server_mp/mp_server/Makefile
index a8e9e47..31b03d5 100644
--- a/examples/multi_process/client_server_mp/mp_server/Makefile
+++ b/examples/multi_process/client_server_mp/mp_server/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/l2fwd_fork/Makefile b/examples/multi_process/l2fwd_fork/Makefile
index b7e0b45..18e56dd 100644
--- a/examples/multi_process/l2fwd_fork/Makefile
+++ b/examples/multi_process/l2fwd_fork/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/simple_mp/Makefile b/examples/multi_process/simple_mp/Makefile
index 0273dec..136dbfa 100644
--- a/examples/multi_process/simple_mp/Makefile
+++ b/examples/multi_process/simple_mp/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/symmetric_mp/Makefile b/examples/multi_process/symmetric_mp/Makefile
index c15212b..d21aa7d 100644
--- a/examples/multi_process/symmetric_mp/Makefile
+++ b/examples/multi_process/symmetric_mp/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/netmap_compat/bridge/Makefile b/examples/netmap_compat/bridge/Makefile
index 74feb1e..ae6447f 100644
--- a/examples/netmap_compat/bridge/Makefile
+++ b/examples/netmap_compat/bridge/Makefile
@@ -34,7 +34,7 @@ $(error "Please define the RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile
index 6dc7ad6..43c9720 100644
--- a/examples/qos_meter/Makefile
+++ b/examples/qos_meter/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
index b91fe37..d16ca53 100755
--- a/examples/qos_sched/Makefile
+++ b/examples/qos_sched/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/Makefile b/examples/quota_watermark/Makefile
index 5596dcc..ba031c3 100644
--- a/examples/quota_watermark/Makefile
+++ b/examples/quota_watermark/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
unexport RTE_SRCDIR RTE_OUTPUT RTE_EXTMK
diff --git a/examples/quota_watermark/qw/Makefile b/examples/quota_watermark/qw/Makefile
index b8f9a4c..3ec7df2 100644
--- a/examples/quota_watermark/qw/Makefile
+++ b/examples/quota_watermark/qw/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/qwctl/Makefile b/examples/quota_watermark/qwctl/Makefile
index f82fca0..b3ba6ee 100644
--- a/examples/quota_watermark/qwctl/Makefile
+++ b/examples/quota_watermark/qwctl/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/timer/Makefile b/examples/timer/Makefile
index a731d80..30f7192 100644
--- a/examples/timer/Makefile
+++ b/examples/timer/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
index e56b184..83b173b 100644
--- a/examples/vhost/Makefile
+++ b/examples/vhost/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vhost_xen/Makefile b/examples/vhost_xen/Makefile
index cfc4cc6..c0cd22e 100644
--- a/examples/vhost_xen/Makefile
+++ b/examples/vhost_xen/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile
index ac8230d..b638d42 100644
--- a/examples/vmdq/Makefile
+++ b/examples/vmdq/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile
index 2374f72..a0868bf 100644
--- a/examples/vmdq_dcb/Makefile
+++ b/examples/vmdq_dcb/Makefile
@@ -34,7 +34,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-default-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/mk/rte.sdkinstall.mk b/mk/rte.sdkinstall.mk
index 61a8771..24b60cf 100644
--- a/mk/rte.sdkinstall.mk
+++ b/mk/rte.sdkinstall.mk
@@ -38,7 +38,7 @@ endif
# Targets to install can be specified in command line. It can be a
# target name or a name containing jokers "*". Example:
-# x86_64-default-*-gcc
+# x86_64-native-*-gcc
ifndef T
T=*
endif
diff --git a/mk/rte.sdkroot.mk b/mk/rte.sdkroot.mk
index 28e404b..c0259f5 100644
--- a/mk/rte.sdkroot.mk
+++ b/mk/rte.sdkroot.mk
@@ -53,7 +53,7 @@ export BUILDING_RTE_SDK
#
# We can specify the configuration template when doing the "make
-# config". For instance: make config T=i686-default-baremetal-gcc
+# config". For instance: make config T=i686-native-baremetal-gcc
#
RTE_CONFIG_TEMPLATE :=
ifdef T
diff --git a/mk/rte.sdktestall.mk b/mk/rte.sdktestall.mk
index 5ea6573..c88012e 100644
--- a/mk/rte.sdktestall.mk
+++ b/mk/rte.sdktestall.mk
@@ -37,7 +37,7 @@ endif
# Targets to test can be specified in command line. It can be a
# target name or a name containing jokers "*". Example:
-# x86_64-default-*-gcc
+# x86_64-native-*-gcc
ifndef T
T=*
endif
diff --git a/pkg/dpdk-core.spec b/pkg/dpdk-core.spec
index f1387f9..8c0e040 100644
--- a/pkg/dpdk-core.spec
+++ b/pkg/dpdk-core.spec
@@ -43,7 +43,7 @@ Group: System Environment/Libraries
License: BSD and LGPLv2 and GPLv2
ExclusiveArch: i686, x86_64
-%define target %{_arch}-default-linuxapp-gcc
+%define target %{_arch}-native-linuxapp-gcc
%define machine default
BuildRequires: kernel-devel, kernel-headers, doxygen
diff --git a/scripts/test-framework.sh b/scripts/test-framework.sh
index 378b21a..56179c6 100755
--- a/scripts/test-framework.sh
+++ b/scripts/test-framework.sh
@@ -35,7 +35,7 @@
# must be executed from root
# do a first build
-make config T=x86_64-default-linuxapp-gcc O=deptest
+make config T=x86_64-native-linuxapp-gcc O=deptest
make -j8 O=deptest
MOD_APP_TEST1=`stat deptest/app/test | grep Modify`
--
1.7.10.4
More information about the dev
mailing list