[dpdk-dev] [PATCH v2 1/3] ether: Add API to support setting TX rate for queue and VF

Ouyang Changchun changchun.ouyang at intel.com
Mon May 26 09:45:29 CEST 2014


This patch adds API to support setting TX rate for a queue and a VF.

Signed-off-by: Ouyang Changchun <changchun.ouyang at intel.com>
---
 lib/librte_ether/rte_ethdev.c | 71 +++++++++++++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_ethdev.h | 51 +++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a5727dd..1ea61e1 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1913,6 +1913,77 @@ rte_eth_dev_set_vf_vlan_filter(uint8_t port_id, uint16_t vlan_id,
 						vf_mask,vlan_on);
 }
 
+int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
+					uint16_t tx_rate)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_link link;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("set queue rate limit:invalid port id=%d\n",
+				port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+	link = dev->data->dev_link;
+
+	if (queue_idx > dev_info.max_tx_queues) {
+		PMD_DEBUG_TRACE("set queue rate limit:port %d: "
+				"invalid queue id=%d\n", port_id, queue_idx);
+		return -EINVAL;
+	}
+
+	if (tx_rate > link.link_speed) {
+		PMD_DEBUG_TRACE("set queue rate limit:invalid tx_rate=%d, "
+				"bigger than link speed= %d\n",
+			tx_rate, link_speed);
+		return -EINVAL;
+	}
+
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_queue_rate_limit, -ENOTSUP);
+	return (*dev->dev_ops->set_queue_rate_limit)(dev, queue_idx, tx_rate);
+}
+
+int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, uint16_t tx_rate,
+				uint64_t q_msk)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_link link;
+
+	if (q_msk == 0)
+		return 0;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("set VF rate limit:invalid port id=%d\n",
+				port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	rte_eth_dev_info_get(port_id, &dev_info);
+	link = dev->data->dev_link;
+
+	if (vf > dev_info.max_vfs) {
+		PMD_DEBUG_TRACE("set VF rate limit:port %d: "
+				"invalid vf id=%d\n", port_id, vf);
+		return -EINVAL;
+	}
+
+	if (tx_rate > link.link_speed) {
+		PMD_DEBUG_TRACE("set VF rate limit:invalid tx_rate=%d, "
+				"bigger than link speed= %d\n",
+				tx_rate, link_speed);
+		return -EINVAL;
+	}
+
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rate_limit, -ENOTSUP);
+	return (*dev->dev_ops->set_vf_rate_limit)(dev, vf, tx_rate, q_msk);
+}
+
 int
 rte_eth_mirror_rule_set(uint8_t port_id, 
 			struct rte_eth_vmdq_mirror_conf *mirror_conf,
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index d5ea46b..445d40a 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1012,6 +1012,17 @@ typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
 				  uint8_t vlan_on);
 /**< @internal Set VF VLAN pool filter */
 
+typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
+				uint16_t queue_idx,
+				uint16_t tx_rate);
+/**< @internal Set queue TX rate */
+
+typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
+				uint16_t vf,
+				uint16_t tx_rate,
+				uint64_t q_msk);
+/**< @internal Set VF TX rate */
+
 typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
 				  struct rte_eth_vmdq_mirror_conf *mirror_conf,
 				  uint8_t rule_id, 
@@ -1119,6 +1130,8 @@ struct eth_dev_ops {
 	eth_set_vf_rx_t            set_vf_rx;  /**< enable/disable a VF receive */
 	eth_set_vf_tx_t            set_vf_tx;  /**< enable/disable a VF transmit */
 	eth_set_vf_vlan_filter_t   set_vf_vlan_filter;  /**< Set VF VLAN filter */
+	eth_set_queue_rate_limit_t set_queue_rate_limit;   /**< Set queue rate limit */
+	eth_set_vf_rate_limit_t    set_vf_rate_limit;   /**< Set VF rate limit */
 
 	/** Add a signature filter. */
 	fdir_add_signature_filter_t fdir_add_signature_filter;
@@ -2561,6 +2574,44 @@ int rte_eth_mirror_rule_reset(uint8_t port_id,
 					 uint8_t rule_id);
 
 /**
+ * Set the rate limitation for a queue on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_idx
+ *   The queue id.
+ * @param tx_rate
+ *   The tx rate allocated from the total link speed for this queue.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
+			uint16_t tx_rate);
+
+/**
+ * Set the rate limitation for a vf on an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @param tx_rate
+ *   The tx rate allocated from the total link speed for this VF id.
+ * @param q_msk
+ *   The queue mask which need to set the rate.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
+			uint16_t tx_rate, uint64_t q_msk);
+
+/**
  * Initialize bypass logic. This function needs to be called before
  * executing any other bypass API.
  *
-- 
1.9.0



More information about the dev mailing list