[dpdk-dev] UDP Checksum

Alex Markuze alex at weka.io
Thu Nov 6 17:26:36 CET 2014


I was setting both ip and udp scum fields to 0. PKT_TX_UDP_CKSUM ==
PKT_TX_L4_MASK = 0x6000.

I was not aware of the get_ipv4_psd_sum(ipv4_hdr);
And I'm quite frankly surprised the HW doesn't already do this. Farther
more I don't remember kernel drivers messing with
L3 Headers(bnx2x/mlx4). Is this true for all PMDs that do scum offloads?

I will give it a try now.


On Thu, Nov 6, 2014 at 6:15 PM, Ananyev, Konstantin <
konstantin.ananyev at intel.com> wrote:

>
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Alex Markuze
> > Sent: Thursday, November 06, 2014 4:05 PM
> > To: dev at dpdk.org
> > Subject: [dpdk-dev] UDP Checksum
> >
> > Hi,
> > I'm seeing "UDP: bad checksum." messages(dmesg) for packets sent by my
> dpdk
> > app to a socket on a remote machine.
> > Looking at the packets the scum value is set, its just not what wireshark
> > expects.
> >
> > When sending I'm setting these fields in the egress packets.
> >
> >         pkt->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
> >
> >         pkt->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
> >
> >         pkt->ol_flags |= (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK);
> > //PKT_TX_OFFLOAD_MASK;
> >
> >
> > I'm working with a 82599 VF.
> >
> >
> > Any thoughts? I'm not sure what else to check.
>
> As I remember, you have to setup  IPV4 header checksum to 0 and
> calculate and setup pseudo-header checksum for UDP.
> From app/test-pmd/csumonly.c:
> ...
> if (pkt_ol_flags & (PKT_RX_IPV4_HDR | PKT_RX_TUNNEL_IPV4_HDR)) {
>
>                         /* Do not support ipv4 option field */
>                         l3_len = sizeof(struct ipv4_hdr) ;
>
>                         ...
>
>                         /* Do not delete, this is required by HW*/
>                         ipv4_hdr->hdr_checksum = 0;
>
>                        ...
>
>                       if (l4_proto == IPPROTO_UDP) {
>                                 udp_hdr = (struct udp_hdr*)
> (rte_pktmbuf_mtod(mb,
>                                                 unsigned char *) + l2_len
> + l3_len);
>                                 if (tx_ol_flags & 0x2) {
>                                         /* HW Offload */
>                                         ol_flags |= PKT_TX_UDP_CKSUM;
>                                         if (ipv4_tunnel)
>                                                 udp_hdr->dgram_cksum = 0;
>                                         else
>                                                 /* Pseudo header sum need
> be set properly */
>                                                 udp_hdr->dgram_cksum =
>
> get_ipv4_psd_sum(ipv4_hdr);
>
>
>
>


More information about the dev mailing list