[dpdk-dev] [PATCH 1/2] examples/vhost: support new VMDQ API and new nic i40e

Chen, Jing D jing.d.chen at intel.com
Fri Nov 14 08:24:58 CET 2014



> -----Original Message-----
> From: Xie, Huawei
> Sent: Friday, November 14, 2014 2:31 PM
> To: Chen, Jing D; dev at dpdk.org
> Subject: RE: [PATCH 1/2] examples/vhost: support new VMDQ API and new
> nic i40e
> 
> 
> 
> > -----Original Message-----
> > From: Chen, Jing D
> > Sent: Wednesday, November 12, 2014 10:58 PM
> > To: Xie, Huawei; dev at dpdk.org
> > Subject: RE: [PATCH 1/2] examples/vhost: support new VMDQ API and
> new nic
> > i40e
> >
> > Hi,
> >
> > > -----Original Message-----
> > > From: Xie, Huawei
> > > Sent: Thursday, November 13, 2014 6:34 AM
> > > To: dev at dpdk.org
> > > Cc: Chen, Jing D; Xie, Huawei
> > > Subject: [PATCH 1/2] examples/vhost: support new VMDQ API and new
> nic
> > > i40e
> > >
> > > In Niantic, if VMDQ mode is set, all queues are allocated to VMDQ in
> DPDK.
> > > In I40E, only configured part of continous queues are allocated to VMDQ.
> > > The rte_eth_dev_info structure is extened to provide VMDQ queue base,
> > > queue number, and VMDQ pool base information.
> > > This patch support the new VMDQ API in vhost example.
> > >
> > > FIXME in PMD:
> > >  * added mac address will be flushed at rte_eth_dev_start.
> > >  * we don't support selectively setting up queues well.
> > >
> > > Signed-off-by: Huawei Xie <huawei.xie at intel.com>
> > > ---
> > >  examples/vhost/main.c | 25 +++++++++++++++++++------
> > >  1 file changed, 19 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/examples/vhost/main.c b/examples/vhost/main.c
> > > index a93f7a0..2b1bf02 100644
> > > --- a/examples/vhost/main.c
> > > +++ b/examples/vhost/main.c
> > > @@ -53,7 +53,7 @@
> > >
> > >  #include "main.h"
> > >
> > > -#define MAX_QUEUES 128
> > > +#define MAX_QUEUES 256
> > >
> > >  /* the maximum number of external ports supported */
> > >  #define MAX_SUP_PORTS 1
> > > @@ -282,6 +282,9 @@ static struct rte_eth_conf vmdq_conf_default = {
> > >  static unsigned lcore_ids[RTE_MAX_LCORE];
> > >  static uint8_t ports[RTE_MAX_ETHPORTS];
> > >  static unsigned num_ports = 0; /**< The number of ports specified in
> > > command line */
> > > +static uint16_t num_pf_queues, num_vmdq_queues;
> > > +static uint16_t vmdq_pool_base, vmdq_queue_base;
> > > +static uint16_t queues_per_pool;
> > >
> > >  static const uint16_t external_pkt_default_vlan_tag = 2000;
> > >  const uint16_t vlan_tags[] = {
> > > @@ -417,7 +420,6 @@ port_init(uint8_t port)
> > >
> > >  	/*configure the number of supported virtio devices based on VMDQ
> > > limits */
> > >  	num_devices = dev_info.max_vmdq_pools;
> > > -	num_queues = dev_info.max_rx_queues;
> > >
> > >  	if (zero_copy) {
> > >  		rx_ring_size = num_rx_descriptor;
> > > @@ -437,10 +439,19 @@ port_init(uint8_t port)
> > >  	retval = get_eth_conf(&port_conf, num_devices);
> > >  	if (retval < 0)
> > >  		return retval;
> > > +	/* NIC queues are divided into pf queues and vmdq queues.  */
> > > +	num_pf_queues = dev_info.max_rx_queues -
> > > dev_info.vmdq_queue_num;
> > > +	queues_per_pool = dev_info.vmdq_queue_num /
> > > dev_info.max_vmdq_pools;
> > > +	num_vmdq_queues = num_devices * queues_per_pool;
> > > +	num_queues = num_pf_queues + num_vmdq_queues;
> > > +	vmdq_queue_base = dev_info.vmdq_queue_base;
> > > +	vmdq_pool_base  = dev_info.vmdq_pool_base;
> > > +	printf("pf queue num: %u, configured vmdq pool num: %u, each
> > > vmdq pool has %u queues\n",
> > > +		num_pf_queues, num_devices, queues_per_pool);
> > >
> > >  	if (port >= rte_eth_dev_count()) return -1;
> > >
> > > -	rx_rings = (uint16_t)num_queues,
> > > +	rx_rings = (uint16_t)dev_info.max_rx_queues;
> >
> > You removed line 'num_queues = dev_info.max_rx_queues'  and calculate
> > 'num_queues'
> > with another equation. I assume you thought it may not equals.
> > So, why you assign dev_info.max_rx_queues to rx_rings again? Won't it
> better to
> > use 'num_queues'
> 
> Actually they are the same here.
> We use max_rx_queues just to say that we initialize all queues rather than
> part of
> queues.
> If all PMDs(1G,10G,i40e) supports selectively initializing queues, then we
> could only initialize
> num_device queues rather than total queues, even without initializing PF
> queues..
> >
> > >  	/* Configure ethernet device. */
> > >  	retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
> > >  	if (retval != 0)
> > > @@ -931,7 +942,8 @@ link_vmdq(struct vhost_dev *vdev, struct
> rte_mbuf
> > > *m)
> > >  		vdev->vlan_tag);
> > >
> > >  	/* Register the MAC address. */
> > > -	ret = rte_eth_dev_mac_addr_add(ports[0], &vdev->mac_address,
> > > (uint32_t)dev->device_fh);
> > > +	ret = rte_eth_dev_mac_addr_add(ports[0], &vdev->mac_address,
> > > +				(uint32_t)dev->device_fh +
> > > vmdq_pool_base);
> > >  	if (ret)
> > >  		RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add
> > > device MAC address to VMDQ\n",
> > >  					dev->device_fh);
> > > @@ -2602,7 +2614,7 @@ new_device (struct virtio_net *dev)
> > >  	ll_dev->vdev = vdev;
> > >  	add_data_ll_entry(&ll_root_used, ll_dev);
> > >  	vdev->vmdq_rx_q
> > > -		= dev->device_fh * (num_queues / num_devices);
> > > +		= dev->device_fh * queues_per_pool + vmdq_queue_base;
> > >
> > >  	if (zero_copy) {
> > >  		uint32_t index = vdev->vmdq_rx_q;
> > > @@ -2837,7 +2849,8 @@ MAIN(int argc, char *argv[])
> > >  	unsigned lcore_id, core_id = 0;
> > >  	unsigned nb_ports, valid_num_ports;
> > >  	int ret;
> > > -	uint8_t portid, queue_id = 0;
> > > +	uint8_t portid;
> > > +	uint16_t queue_id;
> > >  	static pthread_t tid;
> > >
> > >  	/* init EAL */
> > > --
> > > 1.8.1.4

Acked-by : Jing Chen <jing.d.chen at intel.com>



More information about the dev mailing list