[dpdk-dev] [PATCH 0/4] Translate packet types for i40e
Liu, Jijiang
jijiang.liu at intel.com
Wed Nov 19 04:52:59 CET 2014
> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Tuesday, November 18, 2014 11:29 PM
> To: Richardson, Bruce
> Cc: Liu, Jijiang; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH 0/4] Translate packet types for i40e
>
>
>
> > -----Original Message-----
> > From: Richardson, Bruce
> > Sent: Tuesday, November 18, 2014 1:08 PM
> > To: Ananyev, Konstantin
> > Cc: Liu, Jijiang; dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/4] Translate packet types for i40e
> >
> > On Tue, Nov 18, 2014 at 11:33:24AM +0000, Ananyev, Konstantin wrote:
> > > Hi Frank,
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jijiang Liu
> > > > Sent: Tuesday, November 18, 2014 7:37 AM
> > > > To: dev at dpdk.org
> > > > Subject: [dpdk-dev] [PATCH 0/4] Translate packet types for i40e
> > > >
> > > > The i40e NIC can recognize many packet types, including ordinary
> > > > L2 packet format and tunneling packet format such as IP in IP, IP
> > in
> > > > GRE, MAC in GRE and MAC in UDP.
> > > >
> > > > This patch set provides abstract definitions of packet types,
> > > > which can help user to use these packet types directly in their applications
> to speed up receive packet analysis.
> > > >
> > > > Moreover, this patch set translates i40e packet types to abstract
> > > > packet types in i40e driver, and make the corresponding changes in test
> applications.
> > > >
> > > > Jijiang Liu (4):
> > > > Add packet type and IP header check in rte_mbuf
> > > > Remove the PKT_RX_TUNNEL_IPV4_HDR and the
> PKT_RX_TUNNEL_IPV6_HDR
> > > > Translate i40e packet types
> > > > Make the corresponding changes in test-pmd
> > > >
> > > > app/test-pmd/csumonly.c | 12 +-
> > > > app/test-pmd/rxonly.c | 15 +-
> > > > lib/librte_mbuf/rte_mbuf.h | 225 ++++++++++++++-
> > > > lib/librte_pmd_i40e/i40e_rxtx.c | 604
> > > > +++++++++++++++++++++------------------
> > > > 4 files changed, 569 insertions(+), 287 deletions(-)
> > > >
> > >
> > > The patch looks good to me in general.
> > > Though I think it is not complete: we need to make sure that all
> > > PMDs RX functions will set mbuf's packet_type to the defined value.
> > > As right now, only i40e implementation can distinguish packet_type
> > > properly, I think all other PMDs for the freshly received packet should do:
> > > mbuf->packet_type = RTE_PTYPE_UNDEF;
In current codes, the mbuf->packet_type = 0 has already been done in rte_pktmbuf_reset().
> > > Another thing: right now mbuf's packet_type is uint16_t.
> > > While enum rte_eth_packet_type will be interpreted by the compiler as 'int'
> (32bits).
> > > We can either change enum to a lot of defines (which I don't really
> > > like to do) or probably just add a comment somewhere that enum
> rte_eth_packet_type should never exceed UINT16_MAX value?
> > >
> > Add a RTE_PTYPE_MAX value = UINT16_MAX to the enum, perhaps?
>
> Yep, add something like RTE_PTYPE_MAX = UINT16_MAX and RTE_PTYPE_MIN
> == 0 seems like a good thing to me too.
Ok, will add RTE_PTYPE_MAX = UINT16_MAX into rte_eth_packet_type.
Currently, RTE_PTYPE_UNDEF is 0, if the RTE_PTYPE_MIN needed, and RTE_PTYPE_MIN = 1, but I think it is not necessary to add RTE_PTYPE_MIN.
Moreover, there won't be an icc compilation error for the following codes, so we can set mb-> packet_type using enum paket_type directly in i40e driver.
enum rte_eth_packet_type paket_type;
mb-> packet_type = paket_type; //packet_type is uint16 in mbuf.
But there will be an icc compilation error for the following codes, we must convert packet_type in mbuf .
enum rte_eth_packet_type paket_type;
paket_type = mb-> packet_type ; //packet_type is uint16 in mbuf.
and it needs to change as follows to avoid compilation error using icc.
paket_type =(rte_eth_packet_type) mb-> packet_type;
>
> >
> > /Bruce
More information about the dev
mailing list