[dpdk-dev] [PATCH v3 03/14] Add byte order operations for IBM Power architecture

[Qiu, Michael]

On 11/23/2014 9:22 PM, Chao Zhu wrote:
> This patch adds architecture specific byte order operations for IBM Power
> architecture. Power architecture support both big endian and little
> endian. This patch also adds a RTE_ARCH_BIG_ENDIAN micro.
>
> Signed-off-by: Chao Zhu <chaozhu at linux.vnet.ibm.com>
> ---
>  config/defconfig_ppc_64-power8-linuxapp-gcc        |    1 +
>  .../common/include/arch/ppc_64/rte_byteorder.h     |  150 ++++++++++++++++++++
>  2 files changed, 151 insertions(+), 0 deletions(-)
>  create mode 100644 lib/librte_eal/common/include/arch/ppc_64/rte_byteorder.h
>
> diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc
> index 97d72ff..b10f60c 100644
> --- a/config/defconfig_ppc_64-power8-linuxapp-gcc
> +++ b/config/defconfig_ppc_64-power8-linuxapp-gcc
> @@ -34,6 +34,7 @@ CONFIG_RTE_MACHINE="power8"
>  
>  CONFIG_RTE_ARCH="ppc_64"
>  CONFIG_RTE_ARCH_PPC_64=y
> +CONFIG_RTE_ARCH_BIG_ENDIAN=y

Does this means default is Big Endian,  if I runs it in little endian
mode, I need to change it manually?
>  
>  CONFIG_RTE_TOOLCHAIN="gcc"
>  CONFIG_RTE_TOOLCHAIN_GCC=y
> diff --git a/lib/librte_eal/common/include/arch/ppc_64/rte_byteorder.h b/lib/librte_eal/common/include/arch/ppc_64/rte_byteorder.h
> new file mode 100644
> index 0000000..a593e8a
> --- /dev/null
> +++ b/lib/librte_eal/common/include/arch/ppc_64/rte_byteorder.h
> @@ -0,0 +1,150 @@
> +/*
> + *   BSD LICENSE
> + *
> + *   Copyright (C) IBM Corporation 2014.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of IBM Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +*/
> +
> +/* Inspired from FreeBSD src/sys/powerpc/include/endian.h
> + * Copyright (c) 1987, 1991, 1993
> + * The Regents of the University of California.  All rights reserved.
> +*/
> +
> +#ifndef _RTE_BYTEORDER_PPC_64_H_
> +#define _RTE_BYTEORDER_PPC_64_H_
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#include "generic/rte_byteorder.h"
> +
> +/*
> + * An architecture-optimized byte swap for a 16-bit value.
> + *
> + * Do not use this function directly. The preferred function is rte_bswap16().
> + */
> +static inline uint16_t rte_arch_bswap16(uint16_t _x)
> +{
> +	return ((_x >> 8) | ((_x << 8) & 0xff00));
> +}
> +
> +/*
> + * An architecture-optimized byte swap for a 32-bit value.
> + *
> + * Do not use this function directly. The preferred function is rte_bswap32().
> + */
> +static inline uint32_t rte_arch_bswap32(uint32_t _x)
> +{
> +	return ((_x >> 24) | ((_x >> 8) & 0xff00) | ((_x << 8) & 0xff0000) |
> +		((_x << 24) & 0xff000000));
> +}
> +
> +/*
> + * An architecture-optimized byte swap for a 64-bit value.
> + *
> +  * Do not use this function directly. The preferred function is rte_bswap64().
> + */
> +/* 64-bit mode */
> +static inline uint64_t rte_arch_bswap64(uint64_t _x)
> +{
> +	return ((_x >> 56) | ((_x >> 40) & 0xff00) | ((_x >> 24) & 0xff0000) |
> +		((_x >> 8) & 0xff000000) | ((_x << 8) & (0xffULL << 32)) |
> +		((_x << 24) & (0xffULL << 40)) |
> +		((_x << 40) & (0xffULL << 48)) | ((_x << 56)));
> +}
> +
> +#ifndef RTE_FORCE_INTRINSICS
> +#define rte_bswap16(x) ((uint16_t)(__builtin_constant_p(x) ?		\
> +				   rte_constant_bswap16(x) :		\
> +				   rte_arch_bswap16(x)))
> +
> +#define rte_bswap32(x) ((uint32_t)(__builtin_constant_p(x) ?		\
> +				   rte_constant_bswap32(x) :		\
> +				   rte_arch_bswap32(x)))
> +
> +#define rte_bswap64(x) ((uint64_t)(__builtin_constant_p(x) ?		\
> +				   rte_constant_bswap64(x) :		\
> +				   rte_arch_bswap64(x)))
> +#else
> +/*
> + * __builtin_bswap16 is only available gcc 4.8 and upwards
> + */
> +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)
> +#define rte_bswap16(x) ((uint16_t)(__builtin_constant_p(x) ?		\
> +				   rte_constant_bswap16(x) :		\
> +				   rte_arch_bswap16(x)))
> +#endif
> +#endif
> +
> +/* Power 8 have both little endian and big endian mode 
> + * Power 7 only support big endian

Are you sure about this ? What I've heard is that all power CPU(at least
Power7 and 8) supports, but not check the spec.
> + */
> +#ifndef RTE_ARCH_BIG_ENDIAN
> +
> +#define rte_cpu_to_le_16(x) (x)
> +#define rte_cpu_to_le_32(x) (x)
> +#define rte_cpu_to_le_64(x) (x)
> +
> +#define rte_cpu_to_be_16(x) rte_bswap16(x)
> +#define rte_cpu_to_be_32(x) rte_bswap32(x)
> +#define rte_cpu_to_be_64(x) rte_bswap64(x)
> +
> +#define rte_le_to_cpu_16(x) (x)
> +#define rte_le_to_cpu_32(x) (x)
> +#define rte_le_to_cpu_64(x) (x)
> +
> +#define rte_be_to_cpu_16(x) rte_bswap16(x)
> +#define rte_be_to_cpu_32(x) rte_bswap32(x)
> +#define rte_be_to_cpu_64(x) rte_bswap64(x)
> +
> +#else
> +
> +#define rte_cpu_to_le_16(x) rte_bswap16(x)
> +#define rte_cpu_to_le_32(x) rte_bswap32(x)
> +#define rte_cpu_to_le_64(x) rte_bswap64(x)
> +
> +#define rte_cpu_to_be_16(x) (x)
> +#define rte_cpu_to_be_32(x) (x)
> +#define rte_cpu_to_be_64(x) (x)
> +
> +#define rte_le_to_cpu_16(x) rte_bswap16(x)
> +#define rte_le_to_cpu_32(x) rte_bswap32(x)
> +#define rte_le_to_cpu_64(x) rte_bswap64(x)
> +
> +#define rte_be_to_cpu_16(x) (x)
> +#define rte_be_to_cpu_32(x) (x)
> +#define rte_be_to_cpu_64(x) (x)
> +#endif
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTE_BYTEORDER_PPC_64_H_ */
> +