[dpdk-dev] [memnic PATCH v2 6/7] pmd: add branch hint in recv/xmit

[Bruce Richardson]

On Tue, Sep 30, 2014 at 11:52:00PM +0000, Hiroshi Shimamoto wrote:
> Hi,
> 
> > Subject: Re: [dpdk-dev] [memnic PATCH v2 6/7] pmd: add branch hint in recv/xmit
> > 
> > On Tue, Sep 30, 2014 at 11:14:40AM +0000, Hiroshi Shimamoto wrote:
> > > From: Hiroshi Shimamoto <h-shimamoto at ct.jp.nec.com>
> > >
> > > To reduce instruction cache miss, add branch condition hints into
> > > recv/xmit functions. This improves a bit performance.
> > >
> > > We can see performance improvements with memnic-tester.
> > > Using Xeon E5-2697 v2 @ 2.70GHz, 4 vCPU.
> > >  size |  before  |  after
> > >    64 | 5.54Mpps | 5.55Mpps
> > >   128 | 5.46Mpps | 5.44Mpps
> > >   256 | 5.21Mpps | 5.22Mpps
> > >   512 | 4.50Mpps | 4.52Mpps
> > >  1024 | 3.71Mpps | 3.73Mpps
> > >  1280 | 3.21Mpps | 3.22Mpps
> > >  1518 | 2.92Mpps | 2.93Mpps
> > >
> > > Signed-off-by: Hiroshi Shimamoto <h-shimamoto at ct.jp.nec.com>
> > > Reviewed-by: Hayato Momma <h-momma at ce.jp.nec.com>
> > > ---
> > >  pmd/pmd_memnic.c | 18 +++++++++---------
> > >  1 file changed, 9 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/pmd/pmd_memnic.c b/pmd/pmd_memnic.c
> > > index 7fc3093..875d3ea 100644
> > > --- a/pmd/pmd_memnic.c
> > > +++ b/pmd/pmd_memnic.c
> > > @@ -289,26 +289,26 @@ static uint16_t memnic_recv_pkts(void *rx_queue,
> > >  	int idx, next;
> > >  	struct rte_eth_stats *st = &adapter->stats[rte_lcore_id()];
> > >
> > > -	if (!adapter->nic->hdr.valid)
> > > +	if (unlikely(!adapter->nic->hdr.valid))
> > >  		return 0;
> > >
> > >  	pkts = bytes = errs = 0;
> > >  	idx = adapter->up_idx;
> > >  	for (nr = 0; nr < nb_pkts; nr++) {
> > >  		p = &data->packets[idx];
> > > -		if (p->status != MEMNIC_PKT_ST_FILLED)
> > > +		if (unlikely(p->status != MEMNIC_PKT_ST_FILLED))
> > >  			break;
> > >  		/* prefetch the next area */
> > >  		next = idx;
> > > -		if (++next >= MEMNIC_NR_PACKET)
> > > +		if (unlikely(++next >= MEMNIC_NR_PACKET))
> > >  			next = 0;
> > >  		rte_prefetch0(&data->packets[next]);
> > > -		if (p->len > framesz) {
> > > +		if (unlikely(p->len > framesz)) {
> > >  			errs++;
> > >  			goto drop;
> > >  		}
> > >  		mb = rte_pktmbuf_alloc(adapter->mp);
> > > -		if (!mb)
> > > +		if (unlikely(!mb))
> > >  			break;
> > >
> > >  		rte_memcpy(rte_pktmbuf_mtod(mb, void *), p->data, p->len);
> > > @@ -350,7 +350,7 @@ static uint16_t memnic_xmit_pkts(void *tx_queue,
> > >  	uint64_t pkts, bytes, errs;
> > >  	uint32_t framesz = adapter->framesz;
> > >
> > > -	if (!adapter->nic->hdr.valid)
> > > +	if (unlikely(!adapter->nic->hdr.valid))
> > >  		return 0;
> > >
> > >  	pkts = bytes = errs = 0;
> > > @@ -360,7 +360,7 @@ static uint16_t memnic_xmit_pkts(void *tx_queue,
> > >  		struct rte_mbuf *sg;
> > >  		void *ptr;
> > >
> > > -		if (pkt_len > framesz) {
> > > +		if (unlikely(pkt_len > framesz)) {
> > >  			errs++;
> > >  			break;
> > >  		}
> > > @@ -379,7 +379,7 @@ retry:
> > >  			goto retry;
> > >  		}
> > >
> > > -		if (idx != ACCESS_ONCE(adapter->down_idx)) {
> > > +		if (unlikely(idx != ACCESS_ONCE(adapter->down_idx))) {
> > Why are you using ACCESS_ONCE here?  Or for that matter, anywhere else in this
> > PMD?  The whole idea of the ACCESS_ONCE macro is to assign a value to a variable
> > once and prevent it from getting reloaded from memory at a later time, this is
> > exactly contrary to that, both in the sense that you're explicitly reloading the
> > same variable multiple times, and that you're using it as part of a comparison
> > operation, rather than an asignment operation
> 
> ACCESS_ONCE prevents compiler optimization and ensures load from memory.
> There could be multiple threads which read/write that index.
> We should compare the value previous and the current value in memory.
> In that reason, I use ACCESS_ONCE macro to get value in the memory.

Should you not just make the variable volatile? That's the normal way to 
guarantee reads from memory and prevent the compiler caching things in 
registers.

/Bruce

> 
> thanks,
> Hiroshi
> 
> > 
> > Neil
>