[dpdk-dev] [PATCH] pmd: Fixed compilation error due to old RTE_DRV_LOG when bypass=y
Pablo de Lara
pablo.de.lara.guarch at intel.com
Thu Oct 2 00:27:25 CEST 2014
RTE_DRV_LOG macro has changed, so now it requires at least 2 arguments,
which have been added in ixgbe_bypass, specifying log type, to fix compilation error
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
---
lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c | 10 +++++-----
lib/librte_pmd_ixgbe/ixgbe_bypass.c | 2 +-
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c b/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
index 2623419..12cc01d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
@@ -63,7 +63,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
break;
default:
- PMD_DRV_LOG("Invalid fixed module speed");
+ PMD_DRV_LOG(ERR, "Invalid fixed module speed");
return;
}
@@ -72,7 +72,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
&eeprom_data);
if (status) {
- PMD_DRV_LOG("Failed to read Rx Rate Select RS0");
+ PMD_DRV_LOG(ERR, "Failed to read Rx Rate Select RS0");
goto out;
}
@@ -82,7 +82,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
eeprom_data);
if (status) {
- PMD_DRV_LOG("Failed to write Rx Rate Select RS0");
+ PMD_DRV_LOG(ERR, "Failed to write Rx Rate Select RS0");
goto out;
}
@@ -91,7 +91,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
&eeprom_data);
if (status) {
- PMD_DRV_LOG("Failed to read Rx Rate Select RS1");
+ PMD_DRV_LOG(ERR, "Failed to read Rx Rate Select RS1");
goto out;
}
@@ -101,7 +101,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
eeprom_data);
if (status) {
- PMD_DRV_LOG("Failed to write Rx Rate Select RS1");
+ PMD_DRV_LOG(ERR, "Failed to write Rx Rate Select RS1");
goto out;
}
out:
diff --git a/lib/librte_pmd_ixgbe/ixgbe_bypass.c b/lib/librte_pmd_ixgbe/ixgbe_bypass.c
index 1a980b8..15203a4 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_bypass.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_bypass.c
@@ -114,7 +114,7 @@ ixgbe_bypass_init(struct rte_eth_dev *dev)
/* Only allow BYPASS ops on the first port */
if (hw->device_id != IXGBE_DEV_ID_82599_BYPASS ||
hw->bus.func != 0) {
- PMD_DRV_LOG("bypass function is not supported on that device");
+ PMD_DRV_LOG(ERR, "bypass function is not supported on that device");
return;
}
--
1.7.4.1
More information about the dev
mailing list