[dpdk-dev] [PATCH v6 2/9] librte_ether:add VxLAN packet identification API in librte_ether

Jijiang Liu jijiang.liu at intel.com
Tue Oct 21 10:46:01 CEST 2014


There are "some" destination UDP port numbers that have unque meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port, and this value
SHOULD be used by default as the destination UDP port. Some early implementations of VXLAN
have used other values for the destination port. To enable interoperability with these 
implementations, the destination port SHOULD be configurable."

Add two APIs in librte_ether for supporting UDP tunneling port configuration on i40e.
Currently, only VxLAN is implemented in this patch set.
 
Signed-off-by: Jijiang Liu <jijiang.liu at intel.com>
Acked-by: Helin Zhang <helin.zhang at intel.com>
Acked-by: Jingjing Wu <jingjing.wu at intel.com>
Acked-by: Jing Chen <jing.d.chen at intel.com>
---
 lib/librte_ether/rte_ethdev.c |   63 ++++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_ethdev.h |   75 +++++++++++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_ether.h  |    8 ++++
 3 files changed, 146 insertions(+), 0 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 50f10d9..9e111b6 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2038,6 +2038,69 @@ rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
 }
 
 int
+rte_eth_dev_udp_tunnel_add(uint8_t port_id,
+			   struct rte_eth_udp_tunnel *udp_tunnel,
+			   uint8_t count)
+{
+	uint8_t i;
+	struct rte_eth_dev *dev;
+	struct rte_eth_udp_tunnel *tunnel;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	if (udp_tunnel == NULL) {
+		PMD_DEBUG_TRACE("Invalid udp_tunnel parameter\n");
+		return -EINVAL;
+	}
+	tunnel = udp_tunnel;
+
+	for (i = 0; i < count; i++, tunnel++) {
+		if (tunnel->prot_type >= RTE_TUNNEL_TYPE_MAX) {
+			PMD_DEBUG_TRACE("Invalid tunnel type\n");
+			return -EINVAL;
+		}
+	}
+
+	dev = &rte_eth_devices[port_id];
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->udp_tunnel_add, -ENOTSUP);
+	return (*dev->dev_ops->udp_tunnel_add)(dev, udp_tunnel, count);
+}
+
+int
+rte_eth_dev_udp_tunnel_delete(uint8_t port_id,
+			      struct rte_eth_udp_tunnel *udp_tunnel,
+			      uint8_t count)
+{
+	uint8_t i;
+	struct rte_eth_dev *dev;
+	struct rte_eth_udp_tunnel *tunnel;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+	dev = &rte_eth_devices[port_id];
+
+	if (udp_tunnel == NULL) {
+		PMD_DEBUG_TRACE("Invalid udp_tunnel parametr\n");
+		return -EINVAL;
+	}
+	tunnel = udp_tunnel;
+	for (i = 0; i < count; i++, tunnel++) {
+		if (tunnel->prot_type >= RTE_TUNNEL_TYPE_MAX) {
+			PMD_DEBUG_TRACE("Invalid tunnel type\n");
+			return -EINVAL;
+		}
+	}
+
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->udp_tunnel_del, -ENOTSUP);
+	return (*dev->dev_ops->udp_tunnel_del)(dev, udp_tunnel, count);
+}
+
+int
 rte_eth_led_on(uint8_t port_id)
 {
 	struct rte_eth_dev *dev;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index b69a6af..9ad11ec 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -710,6 +710,26 @@ struct rte_fdir_conf {
 };
 
 /**
+ * UDP tunneling configuration.
+ */
+struct rte_eth_udp_tunnel {
+	uint16_t udp_port;
+	uint8_t prot_type;
+};
+
+/**
+ * Tunneled type.
+ */
+enum rte_eth_tunnel_type {
+	RTE_TUNNEL_TYPE_NONE = 0,
+	RTE_TUNNEL_TYPE_VXLAN,
+	RTE_TUNNEL_TYPE_GENEVE,
+	RTE_TUNNEL_TYPE_TEREDO,
+	RTE_TUNNEL_TYPE_NVGRE,
+	RTE_TUNNEL_TYPE_MAX,
+};
+
+/**
  *  Possible l4type of FDIR filters.
  */
 enum rte_l4type {
@@ -831,6 +851,7 @@ struct rte_intr_conf {
  * configuration settings may be needed.
  */
 struct rte_eth_conf {
+	enum rte_eth_tunnel_type tunnel_type;
 	uint16_t link_speed;
 	/**< ETH_LINK_SPEED_10[0|00|000], or 0 for autonegotation */
 	uint16_t link_duplex;
@@ -1266,6 +1287,17 @@ typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev,
 				  uint8_t rule_id);
 /**< @internal Remove a traffic mirroring rule on an Ethernet device */
 
+typedef int (*eth_udp_tunnel_add_t)(struct rte_eth_dev *dev,
+				    struct rte_eth_udp_tunnel *tunnel_udp,
+				    uint8_t count);
+/**< @internal Add tunneling UDP info */
+
+typedef int (*eth_udp_tunnel_del_t)(struct rte_eth_dev *dev,
+				    struct rte_eth_udp_tunnel *tunnel_udp,
+				    uint8_t count);
+/**< @internal Delete tunneling UDP info */
+
+
 #ifdef RTE_NIC_BYPASS
 
 enum {
@@ -1446,6 +1478,8 @@ struct eth_dev_ops {
 	eth_set_vf_rx_t            set_vf_rx;  /**< enable/disable a VF receive */
 	eth_set_vf_tx_t            set_vf_tx;  /**< enable/disable a VF transmit */
 	eth_set_vf_vlan_filter_t   set_vf_vlan_filter;  /**< Set VF VLAN filter */
+	eth_udp_tunnel_add_t       udp_tunnel_add;
+	eth_udp_tunnel_del_t       udp_tunnel_del;
 	eth_set_queue_rate_limit_t set_queue_rate_limit;   /**< Set queue rate limit */
 	eth_set_vf_rate_limit_t    set_vf_rate_limit;   /**< Set VF rate limit */
 
@@ -3342,6 +3376,47 @@ int
 rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
 			      struct rte_eth_rss_conf *rss_conf);
 
+ /**
+ * Add UDP tunneling port of an Ethernet device for filtering a specific
+ * tunneling packet by UDP port number.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ *   UDP tunneling configuration.
+ * @param count
+ *   configuration count.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_add(uint8_t port_id,
+			   struct rte_eth_udp_tunnel *tunnel_udp,
+			   uint8_t count);
+
+ /**
+ * Detete UDP tunneling port configuration of Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ *   UDP tunneling configuration.
+ * @param count
+ *   configuration count.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_delete(uint8_t port_id,
+			      struct rte_eth_udp_tunnel *tunnel_udp,
+			      uint8_t count);
+
 /**
  * add syn filter
  *
diff --git a/lib/librte_ether/rte_ether.h b/lib/librte_ether/rte_ether.h
index 2e08f23..ddbdbb3 100644
--- a/lib/librte_ether/rte_ether.h
+++ b/lib/librte_ether/rte_ether.h
@@ -286,6 +286,12 @@ struct vlan_hdr {
 	uint16_t eth_proto;/**< Ethernet type of encapsulated frame. */
 } __attribute__((__packed__));
 
+/* VXLAN protocol header */
+struct vxlan_hdr {
+	uint32_t vx_flags; /**< VxLAN flag. */
+	uint32_t vx_vni;   /**< VxLAN ID. */
+} __attribute__((__packed__));
+
 /* Ethernet frame types */
 #define ETHER_TYPE_IPv4 0x0800 /**< IPv4 Protocol. */
 #define ETHER_TYPE_IPv6 0x86DD /**< IPv6 Protocol. */
@@ -294,6 +300,8 @@ struct vlan_hdr {
 #define ETHER_TYPE_VLAN 0x8100 /**< IEEE 802.1Q VLAN tagging. */
 #define ETHER_TYPE_1588 0x88F7 /**< IEEE 802.1AS 1588 Precise Time Protocol. */
 
+#define ETHER_VXLAN_HLEN (sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr))
+
 #ifdef __cplusplus
 }
 #endif
-- 
1.7.7.6



More information about the dev mailing list