[dpdk-dev] [RFC PATCH 03/25] eal/pci: Replace pci address comparison code by eal_compare_pci_addr

Bruce Richardson bruce.richardson at intel.com
Wed Oct 29 17:28:49 CET 2014


On Wed, Oct 29, 2014 at 05:49:14PM +0900, Tetsuya Mukawa wrote:
> This patch replaces pci_addr_comparison() and memcmp() of pci addresses by
> eal_compare_pci_addr().
> 
> Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>

Looks like a good cleanup.

Acked-by: Bruce Richardson <bruce.richardson at intel.com>

> ---
>  lib/librte_eal/bsdapp/eal/eal_pci.c       | 16 +---------------
>  lib/librte_eal/common/eal_common_pci.c    |  2 +-
>  lib/librte_eal/common/include/rte_pci.h   | 29 +++++++++++++++++++++++++++++
>  lib/librte_eal/linuxapp/eal/eal_pci.c     | 16 +---------------
>  lib/librte_eal/linuxapp/eal/eal_pci_uio.c |  2 +-
>  5 files changed, 33 insertions(+), 32 deletions(-)
> 
> diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
> index 54fcaf0..2576fa7 100644
> --- a/lib/librte_eal/bsdapp/eal/eal_pci.c
> +++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
> @@ -270,20 +270,6 @@ pci_uio_map_resource(struct rte_pci_device *dev)
>  	return (0);
>  }
>  
> -/* Compare two PCI device addresses. */
> -static int
> -pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
> -{
> -	uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
> -	uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
> -
> -	if (dev_addr > dev_addr2)
> -		return 1;
> -	else
> -		return 0;
> -}
> -
> -
>  /* Scan one pci sysfs entry, and fill the devices list from it. */
>  static int
>  pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
> @@ -358,7 +344,7 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
>  		struct rte_pci_device *dev2 = NULL;
>  
>  		TAILQ_FOREACH(dev2, &pci_device_list, next) {
> -			if (pci_addr_comparison(&dev->addr, &dev2->addr))
> +			if (eal_compare_pci_addr(&dev->addr, &dev2->addr))
>  				continue;
>  			else {
>  				TAILQ_INSERT_BEFORE(dev2, dev, next);
> diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
> index f3c7f71..f01f258 100644
> --- a/lib/librte_eal/common/eal_common_pci.c
> +++ b/lib/librte_eal/common/eal_common_pci.c
> @@ -93,7 +93,7 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
>  		if (devargs->type != RTE_DEVTYPE_BLACKLISTED_PCI &&
>  			devargs->type != RTE_DEVTYPE_WHITELISTED_PCI)
>  			continue;
> -		if (!memcmp(&dev->addr, &devargs->pci.addr, sizeof(dev->addr)))
> +		if (eal_compare_pci_addr(&dev->addr, &devargs->pci.addr))
>  			return devargs;
>  	}
>  	return NULL;
> diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
> index b819539..fe374a8 100644
> --- a/lib/librte_eal/common/include/rte_pci.h
> +++ b/lib/librte_eal/common/include/rte_pci.h
> @@ -261,6 +261,35 @@ eal_parse_pci_DomBDF(const char *input, struct rte_pci_addr *dev_addr)
>  }
>  #undef GET_PCIADDR_FIELD
>  
> +/* Compare two PCI device addresses. */
> +/**
> + * Utility function to compare two PCI device addresses.
> + *
> + * @param addr
> + *	The PCI Bus-Device-Function address to compare
> + * @param addr2
> + *	The PCI Bus-Device-Function address to compare
> + * @return
> + *  0 on equal PCI address.
> + *  Positive on addr is greater than addr2.
> + *  Negative on addr is less than addr2.
> + */
> +static inline int
> +eal_compare_pci_addr(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
> +{
> +	uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) +
> +					(addr->devid << 8) + addr->function;
> +	uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) +
> +					(addr2->devid << 8) + addr2->function;
> +
> +	if (dev_addr > dev_addr2)
> +		return 1;
> +	else if (dev_addr < dev_addr2)
> +		return -1;
> +	else
> +		return 0;
> +}
> +
>  /**
>   * Probe the PCI bus for registered drivers.
>   *
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
> index 5fe3961..862b93a 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
> @@ -186,20 +186,6 @@ error:
>  	return -1;
>  }
>  
> -/* Compare two PCI device addresses. */
> -static int
> -pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
> -{
> -	uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
> -	uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
> -
> -	if (dev_addr > dev_addr2)
> -		return 1;
> -	else
> -		return 0;
> -}
> -
> -
>  /* Scan one pci sysfs entry, and fill the devices list from it. */
>  static int
>  pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
> @@ -292,7 +278,7 @@ pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
>  		struct rte_pci_device *dev2 = NULL;
>  
>  		TAILQ_FOREACH(dev2, &pci_device_list, next) {
> -			if (pci_addr_comparison(&dev->addr, &dev2->addr))
> +			if (eal_compare_pci_addr(&dev->addr, &dev2->addr) != 0)
>  				continue;
>  			else {
>  				TAILQ_INSERT_BEFORE(dev2, dev, next);
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> index 7e62266..f0deeba 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> @@ -120,7 +120,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
>  	TAILQ_FOREACH(uio_res, pci_res_list, next) {
>  
>  		/* skip this element if it doesn't match our PCI address */
> -		if (memcmp(&uio_res->pci_addr, &dev->addr, sizeof(dev->addr)))
> +		if (eal_compare_pci_addr(&uio_res->pci_addr, &dev->addr))
>  			continue;
>  
>  		for (i = 0; i != uio_res->nb_maps; i++) {
> -- 
> 1.9.1
> 


More information about the dev mailing list