[dpdk-dev] [PATCH v5 04/21] ethdev: define structures for adding/deleting flow director

Jingjing Wu jingjing.wu at intel.com
Thu Oct 30 08:26:29 CET 2014


New structures are defined to add or delete flow director filter

Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
 lib/librte_ether/rte_eth_ctrl.h | 171 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 171 insertions(+)

diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
index b4ab731..77b784e 100644
--- a/lib/librte_ether/rte_eth_ctrl.h
+++ b/lib/librte_ether/rte_eth_ctrl.h
@@ -52,6 +52,7 @@ extern "C" {
 enum rte_filter_type {
 	RTE_ETH_FILTER_NONE = 0,
 	RTE_ETH_FILTER_TUNNEL,
+	RTE_ETH_FILTER_FDIR,
 	RTE_ETH_FILTER_MAX
 };
 
@@ -132,6 +133,176 @@ struct rte_eth_tunnel_filter_conf {
 	uint16_t queue_id;      /** < queue number. */
 };
 
+/**
+ * Define all structures for Flow Director Filter type corresponding with specific operations.
+ */
+
+/**
+ * Flow type
+ */
+enum rte_eth_flow_type {
+	RTE_ETH_FLOW_TYPE_NONE = 0x0,
+	RTE_ETH_FLOW_TYPE_UDPV4,
+	RTE_ETH_FLOW_TYPE_TCPV4,
+	RTE_ETH_FLOW_TYPE_SCTPV4,
+	RTE_ETH_FLOW_TYPE_IPV4_OTHER,
+	RTE_ETH_FLOW_TYPE_UDPV6,
+	RTE_ETH_FLOW_TYPE_TCPV6,
+	RTE_ETH_FLOW_TYPE_SCTPV6,
+	RTE_ETH_FLOW_TYPE_IPV6_OTHER,
+};
+
+/**
+ * A structure used to define the input for IPV4 UDP flow
+ */
+struct rte_eth_udpv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address to match. */
+	uint32_t dst_ip;      /**< IPv4 destination address to match. */
+	uint16_t src_port;    /**< UDP source port to match. */
+	uint16_t dst_port;    /**< UDP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV4 TCP flow
+ */
+struct rte_eth_tcpv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address to match. */
+	uint32_t dst_ip;      /**< IPv4 destination address to match. */
+	uint16_t src_port;    /**< TCP source port to match. */
+	uint16_t dst_port;    /**< TCP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV4 SCTP flow
+ */
+struct rte_eth_sctpv4_flow {
+	uint32_t src_ip;          /**< IPv4 source address to match. */
+	uint32_t dst_ip;          /**< IPv4 destination address to match. */
+	uint32_t verify_tag;      /**< Verify tag to match */
+};
+
+/**
+ * A structure used to define the input for IPV4 flow
+ */
+struct rte_eth_ipv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address to match. */
+	uint32_t dst_ip;      /**< IPv4 destination address to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 UDP flow
+ */
+struct rte_eth_udpv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+	uint16_t src_port;       /**< UDP source port to match. */
+	uint16_t dst_port;       /**< UDP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 TCP flow
+ */
+struct rte_eth_tcpv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+	uint16_t src_port;       /**< TCP source port to match. */
+	uint16_t dst_port;       /**< TCP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 SCTP flow
+ */
+struct rte_eth_sctpv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+	uint32_t verify_tag;     /**< Verify tag to match */
+};
+
+/**
+ * A structure used to define the input for IPV6 flow
+ */
+struct rte_eth_ipv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+};
+
+/**
+ * An union contains the inputs for all types of flow
+ */
+union rte_eth_fdir_flow {
+	struct rte_eth_udpv4_flow  udp4_flow;
+	struct rte_eth_tcpv4_flow  tcp4_flow;
+	struct rte_eth_sctpv4_flow sctp4_flow;
+	struct rte_eth_ipv4_flow   ip4_flow;
+	struct rte_eth_udpv6_flow  udp6_flow;
+	struct rte_eth_tcpv6_flow  tcp6_flow;
+	struct rte_eth_sctpv6_flow sctp6_flow;
+	struct rte_eth_ipv6_flow   ip6_flow;
+};
+
+#define RTE_ETH_FDIR_MAX_FLEXWORD_LEN  8
+/**
+ * A structure used to contain extend input of flow
+ */
+struct rte_eth_fdir_flow_ext {
+	uint16_t vlan_tci;
+	uint8_t num_flexwords;         /**< Number of flexwords */
+	uint16_t flexwords[RTE_ETH_FDIR_MAX_FLEXWORD_LEN];
+	/**< It is filled by the flexible payload to match. Each word is in little endian. */
+	uint16_t dest_id;
+	/**< Destination vsi or pool id. 0 indicates PF by default.*/
+};
+
+/**
+ * A structure used to define the input for a flow director filter entry
+ */
+struct rte_eth_fdir_input {
+	enum rte_eth_flow_type flow_type;      /**< Type of flow */
+	union rte_eth_fdir_flow flow;
+	/**< Flow fields to match, dependent on flow_type */
+	struct rte_eth_fdir_flow_ext flow_ext;
+	/**< Additional fields to match */
+};
+
+/**
+ * Flow director report status
+ * It defines what will be reported if fdir entry is matched.
+ */
+enum rte_eth_fdir_status {
+	RTE_ETH_FDIR_NO_REPORT_STATUS = 0, /**< Report nothing. */
+	RTE_ETH_FDIR_REPORT_ID,            /**< Only report FD ID. */
+	RTE_ETH_FDIR_REPORT_ID_FLEX_4,     /**< Report FD ID and 4 flex bytes. */
+	RTE_ETH_FDIR_REPORT_FLEX_8,        /**< Report 8 flex bytes. */
+};
+
+/**
+ * A structure used to define an action when match FDIR packet filter.
+ */
+struct rte_eth_fdir_action {
+	uint16_t rx_queue;        /**< Queue assigned to if fdir match. */
+	uint16_t cnt_idx;
+	/**< Statistic counter index in hardware. If set to 0, default counter will
+	     be used for all flow director entries on each device. */
+	uint8_t  drop;            /**< Accept or reject */
+	enum rte_eth_fdir_status report_status;  /**< Status report option */
+	uint8_t flex_off;
+	/**< If report_status is RTE_ETH_FDIR_REPORT_ID_FLEX_4 or
+	     RTE_ETH_FDIR_REPORT_FLEX_8, flex_off specifies where the reported
+	     flex bytes start from in flexible payload. */
+};
+
+/**
+ * A structure used to define the flow director filter entry by filter_ctrl API
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_ADD and
+ * RTE_ETH_FILTER_DELETE operations.
+ */
+struct rte_eth_fdir_filter {
+	uint32_t soft_id;
+	/**< ID, an unique value is required when deal with fdir entry */
+	struct rte_eth_fdir_input input;    /**< Input set */
+	struct rte_eth_fdir_action action;  /**< Action taken when match */
+};
+
 #ifdef __cplusplus
 }
 #endif
-- 
1.8.1.4



More information about the dev mailing list