[dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director
Wu, Jingjing
jingjing.wu at intel.com
Thu Oct 30 09:25:36 CET 2014
Please ignore this patch sent by mistake. It should be replaced by another patch with the same name.
http://www.dpdk.org/ml/archives/dev/2014-October/007374.html
Sorry for the inconvenience.
> -----Original Message-----
> From: Wu, Jingjing
> Sent: Thursday, October 30, 2014 3:26 PM
> To: dev at dpdk.org
> Cc: Wu, Jingjing; Cao, Min
> Subject: [PATCH v5 01/21] i40e: set up and initialize flow director
>
> To support flow director, this patch sets up fortville resources. It includes
> - Queue 0 pair allocated and set up for flow director
> - Create vsi
> - Reserve memzone for flow director programming packet
>
> Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
> ---
> lib/librte_pmd_i40e/Makefile | 2 +
> lib/librte_pmd_i40e/i40e_ethdev.c | 79 +++++++++++---
> lib/librte_pmd_i40e/i40e_ethdev.h | 31 +++++-
> lib/librte_pmd_i40e/i40e_fdir.c | 222
> ++++++++++++++++++++++++++++++++++++++
> lib/librte_pmd_i40e/i40e_rxtx.c | 127 ++++++++++++++++++++++
> 5 files changed, 447 insertions(+), 14 deletions(-) create mode 100644
> lib/librte_pmd_i40e/i40e_fdir.c
>
> diff --git a/lib/librte_pmd_i40e/Makefile b/lib/librte_pmd_i40e/Makefile
> index bd3428f..98e4bdf 100644
> --- a/lib/librte_pmd_i40e/Makefile
> +++ b/lib/librte_pmd_i40e/Makefile
> @@ -91,6 +91,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) +=
> i40e_ethdev.c
> SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_rxtx.c
> SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_ethdev_vf.c
> SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_pf.c
> +SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_fdir.c
> +
> # this lib depends upon:
> DEPDIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += lib/librte_eal
> lib/librte_ether
> DEPDIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += lib/librte_mempool
> lib/librte_mbuf diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c
> b/lib/librte_pmd_i40e/i40e_ethdev.c
> index c39eedc..cea7725 100644
> --- a/lib/librte_pmd_i40e/i40e_ethdev.c
> +++ b/lib/librte_pmd_i40e/i40e_ethdev.c
> @@ -778,6 +778,12 @@ i40e_dev_start(struct rte_eth_dev *dev)
> i40e_vsi_queues_bind_intr(vsi);
> i40e_vsi_enable_queues_intr(vsi);
>
> + /* enable FDIR MSIX interrupt */
> + if (pf->flags & I40E_FLAG_FDIR) {
> + i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi);
> + i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
> + }
> +
> /* Enable all queues which have been configured */
> ret = i40e_vsi_switch_queues(vsi, TRUE);
> if (ret != I40E_SUCCESS) {
> @@ -2615,16 +2621,30 @@ i40e_vsi_setup(struct i40e_pf *pf,
> case I40E_VSI_SRIOV :
> vsi->nb_qps = pf->vf_nb_qps;
> break;
> + case I40E_VSI_FDIR:
> + vsi->nb_qps = pf->fdir_nb_qps;
> + break;
> default:
> goto fail_mem;
> }
> - ret = i40e_res_pool_alloc(&pf->qp_pool, vsi->nb_qps);
> - if (ret < 0) {
> - PMD_DRV_LOG(ERR, "VSI %d allocate queue failed %d",
> - vsi->seid, ret);
> - goto fail_mem;
> - }
> - vsi->base_queue = ret;
> + /*
> + * The filter status descriptor is reported in rx queue 0,
> + * while the tx queue for fdir filter programming has no
> + * such constraints, can be non-zero queues.
> + * To simplify it, choose FDIR vsi use queue 0 pair.
> + * To make sure it will use queue 0 pair, queue allocation
> + * need be done before this function is called
> + */
> + if (type != I40E_VSI_FDIR) {
> + ret = i40e_res_pool_alloc(&pf->qp_pool, vsi->nb_qps);
> + if (ret < 0) {
> + PMD_DRV_LOG(ERR, "VSI %d allocate queue
> failed %d",
> + vsi->seid, ret);
> + goto fail_mem;
> + }
> + vsi->base_queue = ret;
> + } else
> + vsi->base_queue = I40E_FDIR_QUEUE_ID;
>
> /* VF has MSIX interrupt in VF range, don't allocate here */
> if (type != I40E_VSI_SRIOV) {
> @@ -2756,9 +2776,25 @@ i40e_vsi_setup(struct i40e_pf *pf,
> * Since VSI is not created yet, only configure parameter,
> * will add vsi below.
> */
> - }
> - else {
> - PMD_DRV_LOG(ERR, "VSI: Not support other type VSI yet");
> + } else if (type == I40E_VSI_FDIR) {
> + vsi->uplink_seid = uplink_vsi->uplink_seid;
> + ctxt.pf_num = hw->pf_id;
> + ctxt.vf_num = 0;
> + ctxt.uplink_seid = vsi->uplink_seid;
> + ctxt.connection_type = 0x1; /* regular data port */
> + ctxt.flags = I40E_AQ_VSI_TYPE_PF;
> + ret = i40e_vsi_config_tc_queue_mapping(vsi, &ctxt.info,
> + I40E_DEFAULT_TCMAP);
> + if (ret != I40E_SUCCESS) {
> + PMD_DRV_LOG(ERR, "Failed to configure "
> + "TC queue mapping\n");
> + goto fail_msix_alloc;
> + }
> + ctxt.info.up_enable_bits = I40E_DEFAULT_TCMAP;
> + ctxt.info.valid_sections |=
> +
> rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SCHED_VALID);
> + } else {
> + PMD_DRV_LOG(ERR, "VSI: Not support other type VSI
> yet\n");
> goto fail_msix_alloc;
> }
>
> @@ -2943,8 +2979,16 @@ i40e_pf_setup(struct i40e_pf *pf)
> PMD_DRV_LOG(ERR, "Could not get switch config, err %d",
> ret);
> return ret;
> }
> -
> - /* VSI setup */
> + if (pf->flags & I40E_FLAG_FDIR) {
> + /* make queue allocated first, let FDIR use queue pair 0*/
> + ret = i40e_res_pool_alloc(&pf->qp_pool,
> I40E_DEFAULT_QP_NUM_FDIR);
> + if (ret != I40E_FDIR_QUEUE_ID) {
> + PMD_DRV_LOG(ERR, "queue allocation fails for
> FDIR :"
> + " ret =%d", ret);
> + pf->flags &= ~I40E_FLAG_FDIR;
> + }
> + }
> + /* main VSI setup */
> vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, NULL, 0);
> if (!vsi) {
> PMD_DRV_LOG(ERR, "Setup of main vsi failed"); @@ -2954,9
> +2998,20 @@ i40e_pf_setup(struct i40e_pf *pf)
> dev_data->nb_rx_queues = vsi->nb_qps;
> dev_data->nb_tx_queues = vsi->nb_qps;
>
> + /* setup FDIR after main vsi created.*/
> + if (pf->flags & I40E_FLAG_FDIR) {
> + ret = i40e_fdir_setup(pf);
> + if (ret != I40E_SUCCESS) {
> + PMD_DRV_LOG(ERR, "Failed to setup flow
> director\n");
> + pf->flags &= ~I40E_FLAG_FDIR;
> + }
> + }
> +
> /* Configure filter control */
> memset(&settings, 0, sizeof(settings));
> settings.hash_lut_size = I40E_HASH_LUT_SIZE_128;
> + if (pf->flags & I40E_FLAG_FDIR)
> + settings.enable_fdir = TRUE;
> /* Enable ethtype and macvlan filters */
> settings.enable_ethtype = TRUE;
> settings.enable_macvlan = TRUE;
> diff --git a/lib/librte_pmd_i40e/i40e_ethdev.h
> b/lib/librte_pmd_i40e/i40e_ethdev.h
> index a315adf..6d30f75 100644
> --- a/lib/librte_pmd_i40e/i40e_ethdev.h
> +++ b/lib/librte_pmd_i40e/i40e_ethdev.h
> @@ -46,11 +46,12 @@
> /* number of VSIs and queue default setting */
> #define I40E_MAX_QP_NUM_PER_VF 16
> #define I40E_DEFAULT_QP_NUM_VMDQ 64
> -#define I40E_DEFAULT_QP_NUM_FDIR 64
> +#define I40E_DEFAULT_QP_NUM_FDIR 1
> #define I40E_UINT32_BIT_SIZE (CHAR_BIT * sizeof(uint32_t))
> #define I40E_VFTA_SIZE (4096 / I40E_UINT32_BIT_SIZE)
> /* Default TC traffic in case DCB is not enabled */
> #define I40E_DEFAULT_TCMAP 0x1
> +#define I40E_FDIR_QUEUE_ID 0
>
> /* i40e flags */
> #define I40E_FLAG_RSS (1ULL << 0)
> @@ -221,6 +222,27 @@ struct i40e_pf_vf { };
>
> /*
> + * A structure used to define fields of a FDIR related info.
> + */
> +struct i40e_fdir_info {
> + struct i40e_vsi *fdir_vsi; /* pointer to fdir VSI structure */
> + uint16_t match_counter_index; /* Statistic counter index used for
> fdir*/
> + struct i40e_tx_queue *txq;
> + struct i40e_rx_queue *rxq;
> + void *prg_pkt; /* memory for fdir program packet */
> + uint64_t dma_addr; /* physic address of packet memory*/
> + /*
> + * the rule how bytes stream is extracted as flexible payload
> + * for each payload layer, the setting can up to three elements
> + */
> + struct {
> + uint8_t offset; /* offset in words from the beginning of
> payload */
> + uint8_t size; /* size in words */
> + } flex_set[3][3];
> +
> +};
> +
> +/*
> * Structure to store private data specific for PF instance.
> */
> struct i40e_pf {
> @@ -248,10 +270,10 @@ struct i40e_pf {
> uint16_t vmdq_nb_qps; /* The number of queue pairs of VMDq */
> uint16_t vf_nb_qps; /* The number of queue pairs of VF */
> uint16_t fdir_nb_qps; /* The number of queue pairs of Flow Director
> */
> -
> /* store VXLAN UDP ports */
> uint16_t vxlan_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];
> uint16_t vxlan_bitmap; /* Vxlan bit mask */
> + struct i40e_fdir_info fdir; /* flow director info */
> };
>
> enum pending_msg {
> @@ -352,6 +374,11 @@ int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi, int
> i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on); uint64_t
> i40e_config_hena(uint64_t flags); uint64_t i40e_parse_hena(uint64_t flags);
> +enum i40e_status_code i40e_fdir_setup_tx_resources(struct i40e_pf *pf,
> + unsigned int socket_id);
> +enum i40e_status_code i40e_fdir_setup_rx_resources(struct i40e_pf *pf,
> + unsigned int socket_id);
> +int i40e_fdir_setup(struct i40e_pf *pf);
>
> /* I40E_DEV_PRIVATE_TO */
> #define I40E_DEV_PRIVATE_TO_PF(adapter) \ diff --git
> a/lib/librte_pmd_i40e/i40e_fdir.c b/lib/librte_pmd_i40e/i40e_fdir.c new file
> mode 100644 index 0000000..a44bb73
> --- /dev/null
> +++ b/lib/librte_pmd_i40e/i40e_fdir.c
> @@ -0,0 +1,222 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#include <sys/queue.h>
> +#include <stdio.h>
> +#include <errno.h>
> +#include <stdint.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <stdarg.h>
> +
> +#include <rte_ether.h>
> +#include <rte_ethdev.h>
> +#include <rte_log.h>
> +#include <rte_memzone.h>
> +#include <rte_malloc.h>
> +
> +#include "i40e_logs.h"
> +#include "i40e/i40e_type.h"
> +#include "i40e_ethdev.h"
> +#include "i40e_rxtx.h"
> +
> +#define I40E_FDIR_MZ_NAME "FDIR_MEMZONE"
> +#define I40E_FDIR_PKT_LEN 512
> +
> +#define I40E_COUNTER_PF 2
> +/* Statistic counter index for one pf */
> +#define I40E_COUNTER_INDEX_FDIR(pf_id) (0 + (pf_id) *
> I40E_COUNTER_PF)
> +#define I40E_FLX_OFFSET_IN_FIELD_VECTOR 50
> +
> +static int i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq);
> +
> +static int
> +i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq) {
> + struct i40e_hw *hw = I40E_VSI_TO_HW(rxq->vsi);
> + struct i40e_hmc_obj_rxq rx_ctx;
> + int err = I40E_SUCCESS;
> +
> + memset(&rx_ctx, 0, sizeof(struct i40e_hmc_obj_rxq));
> + /* Init the RX queue in hardware */
> + rx_ctx.dbuff = I40E_RXBUF_SZ_1024 >>
> I40E_RXQ_CTX_DBUFF_SHIFT;
> + rx_ctx.hbuff = 0;
> + rx_ctx.base = rxq->rx_ring_phys_addr /
> I40E_QUEUE_BASE_ADDR_UNIT;
> + rx_ctx.qlen = rxq->nb_rx_desc;
> +#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
> + rx_ctx.dsize = 1;
> +#endif
> + rx_ctx.dtype = i40e_header_split_none;
> + rx_ctx.hsplit_0 = I40E_HEADER_SPLIT_NONE;
> + rx_ctx.rxmax = ETHER_MAX_LEN;
> + rx_ctx.tphrdesc_ena = 1;
> + rx_ctx.tphwdesc_ena = 1;
> + rx_ctx.tphdata_ena = 1;
> + rx_ctx.tphhead_ena = 1;
> + rx_ctx.lrxqthresh = 2;
> + rx_ctx.crcstrip = 0;
> + rx_ctx.l2tsel = 1;
> + rx_ctx.showiv = 1;
> + rx_ctx.prefena = 1;
> +
> + err = i40e_clear_lan_rx_queue_context(hw, rxq->reg_idx);
> + if (err != I40E_SUCCESS) {
> + PMD_DRV_LOG(ERR, "Failed to clear FDIR RX queue
> context.");
> + return err;
> + }
> + err = i40e_set_lan_rx_queue_context(hw, rxq->reg_idx, &rx_ctx);
> + if (err != I40E_SUCCESS) {
> + PMD_DRV_LOG(ERR, "Failed to set FDIR RX queue context.");
> + return err;
> + }
> + rxq->qrx_tail = hw->hw_addr +
> + I40E_QRX_TAIL(rxq->vsi->base_queue);
> +
> + rte_wmb();
> + /* Init the RX tail regieter. */
> + I40E_PCI_REG_WRITE(rxq->qrx_tail, 0);
> + I40E_PCI_REG_WRITE(rxq->qrx_tail, rxq->nb_rx_desc - 1);
> +
> + return err;
> +}
> +
> +/*
> + * i40e_fdir_setup - reserve and initialize the Flow Director resources
> + * @pf: board private structure
> + */
> +int
> +i40e_fdir_setup(struct i40e_pf *pf)
> +{
> + struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> + struct i40e_vsi *vsi;
> + int err = I40E_SUCCESS;
> + char z_name[RTE_MEMZONE_NAMESIZE];
> + const struct rte_memzone *mz = NULL;
> + struct rte_eth_dev *eth_dev = pf->adapter->eth_dev;
> +
> + PMD_DRV_LOG(INFO, "FDIR HW Capabilities:
> num_filters_guaranteed = %u,"
> + " num_filters_best_effort = %u.",
> + hw->func_caps.fd_filters_guaranteed,
> + hw->func_caps.fd_filters_best_effort);
> +
> + vsi = pf->fdir.fdir_vsi;
> + if (vsi) {
> + PMD_DRV_LOG(ERR, "FDIR vsi pointer needs"
> + "to be null before creation.");
> + return I40E_ERR_BAD_PTR;
> + }
> + /* make new FDIR VSI */
> + vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR, pf->main_vsi, 0);
> + if (!vsi) {
> + PMD_DRV_LOG(ERR, "Couldn't create FDIR VSI.");
> + return I40E_ERR_NO_AVAILABLE_VSI;
> + }
> + pf->fdir.fdir_vsi = vsi;
> +
> + /*Fdir tx queue setup*/
> + err = i40e_fdir_setup_tx_resources(pf, 0);
> + if (err) {
> + PMD_DRV_LOG(ERR, "Failed to setup FDIR TX resources.");
> + goto fail_setup_tx;
> + }
> +
> + /*Fdir rx queue setup*/
> + err = i40e_fdir_setup_rx_resources(pf, 0);
> + if (err) {
> + PMD_DRV_LOG(ERR, "Failed to setup FDIR RX resources.");
> + goto fail_setup_rx;
> + }
> +
> + err = i40e_tx_queue_init(pf->fdir.txq);
> + if (err) {
> + PMD_DRV_LOG(ERR, "Failed to do FDIR TX initialization.");
> + goto fail_mem;
> + }
> +
> + /* need switch on before dev start*/
> + err = i40e_switch_tx_queue(hw, vsi->base_queue, TRUE);
> + if (err) {
> + PMD_DRV_LOG(ERR, "Failed to do fdir TX switch on.");
> + goto fail_mem;
> + }
> +
> + /* Init the rx queue in hardware */
> + err = i40e_fdir_rx_queue_init(pf->fdir.rxq);
> + if (err) {
> + PMD_DRV_LOG(ERR, "Failed to do FDIR RX initialization.");
> + goto fail_mem;
> + }
> +
> + /* switch on rx queue */
> + err = i40e_switch_rx_queue(hw, vsi->base_queue, TRUE);
> + if (err) {
> + PMD_DRV_LOG(ERR, "Failed to do FDIR RX switch on.");
> + goto fail_mem;
> + }
> +
> + /* reserve memory for the fdir programming packet */
> + snprintf(z_name, sizeof(z_name), "%s_%s_%d",
> + eth_dev->driver->pci_drv.name,
> + I40E_FDIR_MZ_NAME,
> + eth_dev->data->port_id);
> + mz = rte_memzone_lookup(z_name);
> + if (!mz) {
> + mz = rte_memzone_reserve(z_name,
> + I40E_FDIR_PKT_LEN,
> + rte_socket_id(),
> + 0);
> + if (!mz) {
> + PMD_DRV_LOG(ERR, "Cannot init memzone for"
> + "flow director program packet.");
> + err = I40E_ERR_NO_MEMORY;
> + goto fail_mem;
> + }
> + }
> + pf->fdir.prg_pkt = mz->addr;
> + pf->fdir.dma_addr = (uint64_t)mz->phys_addr;
> + pf->fdir.match_counter_index = I40E_COUNTER_INDEX_FDIR(hw-
> >pf_id);
> + PMD_DRV_LOG(INFO, "FDIR setup successfully, with programming
> queue %u.",
> + vsi->base_queue);
> + return I40E_SUCCESS;
> +
> +fail_mem:
> + i40e_dev_rx_queue_release(pf->fdir.rxq);
> + pf->fdir.rxq = NULL;
> +fail_setup_rx:
> + i40e_dev_tx_queue_release(pf->fdir.txq);
> + pf->fdir.txq = NULL;
> +fail_setup_tx:
> + i40e_vsi_release(vsi);
> + pf->fdir.fdir_vsi = NULL;
> + return err;
> +}
> \ No newline at end of file
> diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
> index 315a9c0..f2334de 100644
> --- a/lib/librte_pmd_i40e/i40e_rxtx.c
> +++ b/lib/librte_pmd_i40e/i40e_rxtx.c
> @@ -2150,6 +2150,8 @@ i40e_tx_queue_init(struct i40e_tx_queue *txq)
> tx_ctx.base = txq->tx_ring_phys_addr /
> I40E_QUEUE_BASE_ADDR_UNIT;
> tx_ctx.qlen = txq->nb_tx_desc;
> tx_ctx.rdylist = rte_le_to_cpu_16(vsi->info.qs_handle[0]);
> + if (vsi->type == I40E_VSI_FDIR)
> + tx_ctx.fd_ena = TRUE;
>
> err = i40e_clear_lan_tx_queue_context(hw, pf_q);
> if (err != I40E_SUCCESS) {
> @@ -2366,3 +2368,128 @@ i40e_dev_clear_queues(struct rte_eth_dev
> *dev)
> i40e_reset_rx_queue(dev->data->rx_queues[i]);
> }
> }
> +
> +enum i40e_status_code
> +i40e_fdir_setup_tx_resources(struct i40e_pf *pf,
> + unsigned int socket_id)
> +{
> + struct i40e_tx_queue *txq;
> + const struct rte_memzone *tz = NULL;
> + uint32_t ring_size;
> + struct rte_eth_dev *dev = pf->adapter->eth_dev;
> +
> +#define I40E_FDIR_NUM_TX_DESC I40E_MIN_RING_DESC
> + if (!pf) {
> + PMD_DRV_LOG(ERR, "PF is not available");
> + return I40E_ERR_BAD_PTR;
> + }
> +
> + /* Allocate the TX queue data structure. */
> + txq = rte_zmalloc_socket("i40e fdir tx queue",
> + sizeof(struct i40e_tx_queue),
> + CACHE_LINE_SIZE,
> + socket_id);
> + if (!txq) {
> + PMD_DRV_LOG(ERR, "Failed to allocate memory for "
> + "tx queue structure\n");
> + return I40E_ERR_NO_MEMORY;
> + }
> +
> + /* Allocate TX hardware ring descriptors. */
> + ring_size = sizeof(struct i40e_tx_desc) * I40E_FDIR_NUM_TX_DESC;
> + ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
> +
> + tz = i40e_ring_dma_zone_reserve(dev,
> + "fdir_tx_ring",
> + I40E_FDIR_QUEUE_ID,
> + ring_size,
> + socket_id);
> + if (!tz) {
> + i40e_dev_tx_queue_release(txq);
> + PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for
> TX\n");
> + return I40E_ERR_NO_MEMORY;
> + }
> +
> + txq->nb_tx_desc = I40E_FDIR_NUM_TX_DESC;
> + txq->queue_id = I40E_FDIR_QUEUE_ID;
> + txq->reg_idx = pf->fdir.fdir_vsi->base_queue;
> + txq->vsi = pf->fdir.fdir_vsi;
> +
> +#ifdef RTE_LIBRTE_XEN_DOM0
> + txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id,
> +tz->phys_addr); #else
> + txq->tx_ring_phys_addr = (uint64_t)tz->phys_addr; #endif
> + txq->tx_ring = (struct i40e_tx_desc *)tz->addr;
> + /*
> + * don't need to allocate software ring and reset for the fdir
> + * program queue just set the queue has been configured.
> + */
> + txq->q_set = TRUE;
> + pf->fdir.txq = txq;
> +
> + return I40E_SUCCESS;
> +}
> +
> +enum i40e_status_code
> +i40e_fdir_setup_rx_resources(struct i40e_pf *pf,
> + unsigned int socket_id)
> +{
> + struct i40e_rx_queue *rxq;
> + const struct rte_memzone *rz = NULL;
> + uint32_t ring_size;
> + struct rte_eth_dev *dev = pf->adapter->eth_dev;
> +
> +#define I40E_FDIR_NUM_RX_DESC I40E_MIN_RING_DESC
> + if (!pf) {
> + PMD_DRV_LOG(ERR, "PF is not available");
> + return I40E_ERR_BAD_PTR;
> + }
> +
> + /* Allocate the TX queue data structure. */
> + rxq = rte_zmalloc_socket("i40e fdir rx queue",
> + sizeof(struct i40e_rx_queue),
> + CACHE_LINE_SIZE,
> + socket_id);
> + if (!rxq) {
> + PMD_DRV_LOG(ERR, "Failed to allocate memory for "
> + "rx queue structure\n");
> + return I40E_ERR_NO_MEMORY;
> + }
> +
> + /* Allocate TX hardware ring descriptors. */
> + ring_size = sizeof(union i40e_rx_desc) * I40E_FDIR_NUM_RX_DESC;
> + ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
> +
> + rz = i40e_ring_dma_zone_reserve(dev,
> + "fdir_rx_ring",
> + I40E_FDIR_QUEUE_ID,
> + ring_size,
> + socket_id);
> + if (!rz) {
> + i40e_dev_rx_queue_release(rxq);
> + PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for
> RX\n");
> + return I40E_ERR_NO_MEMORY;
> + }
> +
> + rxq->nb_rx_desc = I40E_FDIR_NUM_RX_DESC;
> + rxq->queue_id = I40E_FDIR_QUEUE_ID;
> + rxq->reg_idx = pf->fdir.fdir_vsi->base_queue;
> + rxq->vsi = pf->fdir.fdir_vsi;
> +
> +#ifdef RTE_LIBRTE_XEN_DOM0
> + rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id,
> +rz->phys_addr); #else
> + rxq->rx_ring_phys_addr = (uint64_t)rz->phys_addr; #endif
> + rxq->rx_ring = (union i40e_rx_desc *)rz->addr;
> +
> + /*
> + * Don't need to allocate software ring and reset for the fdir
> + * rx queue, just set the queue has been configured.
> + */
> + rxq->q_set = TRUE;
> + pf->fdir.rxq = rxq;
> +
> + return I40E_SUCCESS;
> +}
> --
> 1.8.1.4
More information about the dev
mailing list