[dpdk-dev] [PATCH 1/3] distributor_app: new sample app

reshmapa reshma.pattan at intel.com
Tue Sep 16 14:13:25 CEST 2014


From: Bruce Richardson <bruce.richardson at intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker

The app takes no command-line parameters other than those passed to the
EAL. The cores to be used are specified via the EAL coremask and the
ports to be used can be specified using the EAL whitelisting and
blacklisting support.
---
 examples/Makefile                 |   1 +
 examples/distributor_app/Makefile |  57 +++++
 examples/distributor_app/main.c   | 459 ++++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |  46 ++++
 4 files changed, 563 insertions(+)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index d6b08c2..3164aab 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -64,5 +64,6 @@ DIRS-y += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..d46746e
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -g -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..45d5bc1
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,459 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define RX_FREE_THRESH 32
+#define RX_PTHRESH 8
+#define RX_HTHRESH 8
+#define RX_WTHRESH 0
+
+#define TX_RING_SIZE 512
+#define TX_FREE_THRESH 32
+#define TX_PTHRESH 32
+#define TX_HTHRESH 0
+#define TX_WTHRESH 0
+#define TX_RSBIT_THRESH 32
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+	ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.lpbk_mode = 0,
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+static const struct rte_eth_rxconf rx_conf_default = {
+	.rx_thresh = {
+		.pthresh = RX_PTHRESH,
+		.hthresh = RX_HTHRESH,
+		.wthresh = RX_WTHRESH,
+	},
+	.rx_free_thresh = RX_FREE_THRESH,
+	.rx_drop_en = 0,
+};
+
+static const struct rte_eth_txconf tx_conf_default = {
+	.tx_thresh = {
+		.pthresh = TX_PTHRESH,
+		.hthresh = TX_HTHRESH,
+		.wthresh = TX_WTHRESH,
+	},
+	.tx_free_thresh = TX_FREE_THRESH,
+	.tx_rs_thresh = TX_RSBIT_THRESH,
+	.txq_flags = TX_Q_FLAGS
+
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE + 3];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&rx_conf_default, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&tx_conf_default);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+};
+
+static __attribute__((noreturn)) void
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++)
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	for (;;) {
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			printf("Packet loss due to full ring\n");
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		printf("Packet loss with tx_burst\n");
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static __attribute__((noreturn)) void
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++)
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	for (;;) {
+		for (port = 0; port < nb_ports; port++) {
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/* workers should update in_port to hold the
+				 * output port value */
+				outp = bufs[i]->pkt.in_port;
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+}
+
+
+static __attribute__((noreturn)) void
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/* for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	for (;;) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->pkt.in_port ^= xor_val;
+	}
+}
+
+static void
+int_handler(int sig_num)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("Exiting on signal %d\n", sig_num);
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+	exit(0);
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	if (rte_eal_pci_probe() != 0)
+		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+				       MBUF_SIZE, MBUF_CACHE_SIZE,
+				       sizeof(struct rte_pktmbuf_pool_private),
+				       rte_pktmbuf_pool_init, NULL,
+				       rte_pktmbuf_init, NULL,
+				       rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++)
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/* scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring};
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring };
+	lcore_rx(&p);
+	return 0;
+}
+
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.8.3.1



More information about the dev mailing list