[dpdk-dev] [PATCH v2] bond: Add mode 4 support.

Neil Horman nhorman at tuxdriver.com
Tue Sep 30 21:06:30 CEST 2014


On Tue, Sep 30, 2014 at 07:19:33AM +0100, Pawel Wodkowski wrote:
> This patch adds support mode 4 of link bonding. It depend on Delcan Doherty
> patches v3 and rte alarms patch v2 or above.
> 
> New version handles race issues with setting/cancelin callbacks,
> fixes promiscus mode setting in mode 4 and some other minor errors in mode 4
> implementation.
> 
> 
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski at intel.com>
Looks good.
Acked-by: Neil Horman <nhorman at tuxdriver.com>

> ---
>  lib/librte_ether/rte_ether.h               |    1 +
>  lib/librte_pmd_bond/Makefile               |    1 +
>  lib/librte_pmd_bond/rte_eth_bond.h         |    4 +
>  lib/librte_pmd_bond/rte_eth_bond_8023ad.c  | 1070 ++++++++++++++++++++++++++++
>  lib/librte_pmd_bond/rte_eth_bond_8023ad.h  |  405 +++++++++++
>  lib/librte_pmd_bond/rte_eth_bond_api.c     |   82 ++-
>  lib/librte_pmd_bond/rte_eth_bond_args.c    |    1 +
>  lib/librte_pmd_bond/rte_eth_bond_pmd.c     |  261 ++++++-
>  lib/librte_pmd_bond/rte_eth_bond_private.h |   42 +-
>  9 files changed, 1821 insertions(+), 46 deletions(-)
>  create mode 100644 lib/librte_pmd_bond/rte_eth_bond_8023ad.c
>  create mode 100644 lib/librte_pmd_bond/rte_eth_bond_8023ad.h
> 
> diff --git a/lib/librte_ether/rte_ether.h b/lib/librte_ether/rte_ether.h
> index 2e08f23..1a3711b 100644
> --- a/lib/librte_ether/rte_ether.h
> +++ b/lib/librte_ether/rte_ether.h
> @@ -293,6 +293,7 @@ struct vlan_hdr {
>  #define ETHER_TYPE_RARP 0x8035 /**< Reverse Arp Protocol. */
>  #define ETHER_TYPE_VLAN 0x8100 /**< IEEE 802.1Q VLAN tagging. */
>  #define ETHER_TYPE_1588 0x88F7 /**< IEEE 802.1AS 1588 Precise Time Protocol. */
> +#define ETHER_TYPE_SLOW 0x8809 /**< Slow protocols (LACP and Marker). */
>  
>  #ifdef __cplusplus
>  }
> diff --git a/lib/librte_pmd_bond/Makefile b/lib/librte_pmd_bond/Makefile
> index 953d75e..c2312c2 100644
> --- a/lib/librte_pmd_bond/Makefile
> +++ b/lib/librte_pmd_bond/Makefile
> @@ -44,6 +44,7 @@ CFLAGS += $(WERROR_FLAGS)
>  #
>  SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_api.c
>  SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_pmd.c
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_8023ad.c
>  SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_args.c
>  
>  #
> diff --git a/lib/librte_pmd_bond/rte_eth_bond.h b/lib/librte_pmd_bond/rte_eth_bond.h
> index 6811c7b..b0223c2 100644
> --- a/lib/librte_pmd_bond/rte_eth_bond.h
> +++ b/lib/librte_pmd_bond/rte_eth_bond.h
> @@ -75,6 +75,10 @@ extern "C" {
>  /**< Broadcast (Mode 3).
>   * In this mode all transmitted packets will be transmitted on all available
>   * active slaves of the bonded. */
> +#define BONDING_MODE_8023AD				(4)
> +/**< 802.3AD (Mode 4).
> + * In this mode transmission and reception of packets is managed by LACP
> + * protocol specified in 802.3AD documentation. */
>  
>  /* Balance Mode Transmit Policies */
>  #define BALANCE_XMIT_POLICY_LAYER2		(0)
> diff --git a/lib/librte_pmd_bond/rte_eth_bond_8023ad.c b/lib/librte_pmd_bond/rte_eth_bond_8023ad.c
> new file mode 100644
> index 0000000..de416c6
> --- /dev/null
> +++ b/lib/librte_pmd_bond/rte_eth_bond_8023ad.c
> @@ -0,0 +1,1070 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stddef.h>
> +#include <string.h>
> +
> +#include <rte_alarm.h>
> +#include <rte_malloc.h>
> +#include <rte_errno.h>
> +
> +#include "rte_eth_bond_private.h"
> +#include "rte_eth_bond_8023ad.h"
> +
> +#include <rte_cycles.h>
> +
> +#ifdef RTE_LIBRTE_BOND_DEBUG_8023AD
> +#define MODE4_DEBUG(fmt, ...) RTE_LOG(DEBUG, PMD, "%6u [Port %u: %s] " fmt, \
> +			bond_dbg_get_time_diff_ms(), internals->active_slaves[port_num], \
> +			__FUNCTION__, ##__VA_ARGS__)
> +
> +static unsigned
> +bond_dbg_get_time_diff_ms(void)
> +{
> +	static uint64_t start_time = 0;
> +	uint64_t now;
> +
> +	now = rte_rdtsc();
> +	if (start_time == 0)
> +		start_time = now;
> +
> +	return ((now - start_time) * 1000) / rte_get_tsc_hz();
> +}
> +
> +static void
> +bond_print_lacp(struct lacpdu *l)
> +{
> +	char a_address[18];
> +	char p_address[18];
> +	char a_state[256] = { 0 };
> +	char p_state[256] = { 0 };
> +
> +	static const char *state_labels[] = {
> +		"ACT", "TIMEOUT", "AGG", "SYNC", "COL", "DIST", "DEF", "EXP"
> +	};
> +
> +	int a_len = 0;
> +	int p_len = 0;
> +	uint8_t i;
> +	uint8_t *addr;
> +
> +	addr = l->actor.port_params.system.addr_bytes;
> +	snprintf(a_address, sizeof(a_address), "%02X:%02X:%02X:%02X:%02X:%02X",
> +		addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
> +
> +	addr = l->partner.port_params.system.addr_bytes;
> +	snprintf(p_address, sizeof(p_address), "%02X:%02X:%02X:%02X:%02X:%02X",
> +		addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
> +
> +	for (i = 0; i < 8; i++) {
> +		if ((l->actor.state >> i) & 1) {
> +			a_len += snprintf(a_state + a_len, sizeof(a_state) - a_len, "%s ",
> +				state_labels[i]);
> +		}
> +
> +		if ((l->partner.state >> i) & 1) {
> +			p_len += snprintf(p_state + p_len, sizeof(p_state) - p_len, "%s ",
> +				state_labels[i]);
> +		}
> +	}
> +
> +	if (a_len && a_state[a_len-1] == ' ')
> +		a_state[a_len-1] = '\0';
> +
> +	if (p_len && p_state[p_len-1] == ' ')
> +			p_state[p_len-1] = '\0';
> +
> +	RTE_LOG(DEBUG, PMD, "LACP: {\n"\
> +			"  subtype= %02X\n"\
> +			"  ver_num=%02X\n"\
> +			"  actor={ tlv=%02X, len=%02X\n"\
> +			"    pri=%04X, system=%s, key=%04X, p_pri=%04X p_num=%04X\n"\
> +			"       state={ %s }\n"\
> +			"  }\n"\
> +			"  partner={ tlv=%02X, len=%02X\n"\
> +			"    pri=%04X, system=%s, key=%04X, p_pri=%04X p_num=%04X\n"\
> +			"       state={ %s }\n"\
> +			"  }\n"\
> +			"  collector={info=%02X, length=%02X, max_delay=%04X\n, " \
> +							"type_term=%02X, terminator_length = %02X}\n",\
> +			l->subtype,\
> +			l->version_number,\
> +			l->actor.tlv_type_info,\
> +			l->actor.info_length,\
> +			l->actor.port_params.system_priority,\
> +			a_address,\
> +			l->actor.port_params.key,\
> +			l->actor.port_params.port_priority,\
> +			l->actor.port_params.port_number,\
> +			a_state,\
> +			l->partner.tlv_type_info,\
> +			l->partner.info_length,\
> +			l->partner.port_params.system_priority,\
> +			p_address,\
> +			l->partner.port_params.key,\
> +			l->partner.port_params.port_priority,\
> +			l->partner.port_params.port_number,\
> +			p_state,\
> +			l->tlv_type_collector_info,\
> +			l->collector_info_length,\
> +			l->collector_max_delay,\
> +			l->tlv_type_terminator,\
> +			l->terminator_length);
> +
> +}
> +#define BOND_PRINT_LACP(lacpdu) bond_print_lacp(lacpdu)
> +
> +#else
> +#define BOND_PRINT_LACP(lacpdu) do { } while (0)
> +#define MODE4_DEBUG(fmt, ...) do { } while (0)
> +#endif
> +
> +static const struct ether_addr lacp_mac_addr = {
> +	.addr_bytes = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x02 }
> +};
> +
> +static void
> +timer_cancel(uint64_t *timer)
> +{
> +	*timer = 0;
> +}
> +
> +static void
> +timer_set(uint64_t *timer, uint64_t timeout_ms)
> +{
> +	*timer = rte_rdtsc() + timeout_ms * rte_get_tsc_hz() / 1000;
> +}
> +
> +/* Forces given timer to be in expired state. */
> +static void
> +timer_force_expired(uint64_t *timer)
> +{
> +	*timer = rte_rdtsc();
> +}
> +
> +static bool
> +timer_is_stopped(uint64_t *timer)
> +{
> +	return *timer == 0;
> +}
> +
> +static bool
> +timer_is_expired(uint64_t *timer)
> +{
> +	return *timer <= rte_rdtsc();
> +}
> +
> +/* Timer is in running state if it is not stopped nor expired */
> +static bool
> +timer_is_running(uint64_t *timer)
> +{
> +	return !timer_is_stopped(timer) && !timer_is_expired(timer);
> +}
> +
> +static void
> +record_default(struct port *port)
> +{
> +	/* Record default parametes for partner. Partner admin parameters
> +	 * are not implemented so set them to arbitrary default (last known) and
> +	 * mark actor that parner is in defaulted state. */
> +	port->partner_state = STATE_LACP_ACTIVE;
> +	ACTOR_STATE_SET(port, DEFAULTED);
> +}
> +
> +/** Function handles rx state machine.
> + *
> + * This function implements Receive State Machine from point 5.4.12 in
> + * 802.1AX documentation. It should be called periodically.
> + *
> + * @param lacpdu		LACPDU received.
> + * @param port			Port on which LACPDU was received.
> + */
> +static void
> +rx_machine(struct bond_dev_private *internals, uint8_t port_num,
> +	struct lacpdu *lacp)
> +{
> +	struct port *port = &internals->mode4.port_list[port_num];
> +
> +	if (SM_FLAG(port, BEGIN)) {
> +		/* Initialize stuff */
> +		MODE4_DEBUG("-> INITIALIZE\n");
> +		SM_FLAG_CLR(port, MOVED);
> +		port->selected = UNSELECTED;
> +
> +		record_default(port);
> +
> +		ACTOR_STATE_CLR(port, EXPIRED);
> +		timer_cancel(&port->current_while_timer);
> +
> +		/* DISABLED: On initialization partner is out of sync */
> +		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
> +
> +		/* LACP DISABLED stuff if LACP not enabled on this port */
> +		if (!SM_FLAG(port, LACP_ENABLED))
> +			PARTNER_STATE_CLR(port, AGGREGATION);
> +	}
> +
> +	if (!SM_FLAG(port, LACP_ENABLED)) {
> +		/* Update parameters only if state changed */
> +		if (!timer_is_stopped(&port->current_while_timer)) {
> +			port->selected = UNSELECTED;
> +			record_default(port);
> +			PARTNER_STATE_CLR(port, AGGREGATION);
> +			ACTOR_STATE_CLR(port, EXPIRED);
> +			timer_cancel(&port->current_while_timer);
> +		}
> +		return;
> +	}
> +
> +	if (lacp) {
> +		MODE4_DEBUG("LACP -> CURRENT\n");
> +		BOND_PRINT_LACP(lacp);
> +		/* Update selected flag. If partner parameters are defaulted assume they
> +		 * are match. If not defaulted  compare LACP actor with ports parner
> +		 * params. */
> +		if (!(port->actor_state & STATE_DEFAULTED) &&
> +			(((port->partner_state ^ lacp->actor.state) & STATE_AGGREGATION) ||
> +				memcmp(&port->partner, &lacp->actor.port_params,
> +					sizeof(port->partner)) != 0)) {
> +			MODE4_DEBUG("selected <- UNSELECTED\n");
> +			port->selected = UNSELECTED;
> +		}
> +
> +		/* Record this PDU actor params as partner params */
> +		memcpy(&port->partner, &lacp->actor.port_params,
> +			sizeof(struct port_params));
> +		port->partner_state = lacp->actor.state;
> +
> +		/* Partner parameters are not defaulted any more */
> +		ACTOR_STATE_CLR(port, DEFAULTED);
> +
> +		/* Update NTT if partners information are outdated */
> +		uint8_t state_mask = STATE_LACP_ACTIVE | STATE_LACP_SHORT_TIMEOUT |
> +			STATE_SYNCHRONIZATION | STATE_AGGREGATION;
> +
> +		if (((port->actor_state ^ lacp->partner.state) & state_mask) ||
> +				memcmp(&port->actor, &lacp->partner.port_params,
> +					sizeof(struct port_params)) != 0) {
> +			port->sm_flags |= SM_FLAGS_NTT;
> +		}
> +
> +		/* If LACP partner params match this port actor params */
> +		if (memcmp(&port->actor, &lacp->partner.port_params,
> +			    sizeof(port->actor)) == 0 &&
> +			(port->partner_state & STATE_AGGREGATION) == (port->actor_state
> +			    & STATE_AGGREGATION))
> +			PARTNER_STATE_SET(port, SYNCHRONIZATION);
> +		else if (!(port->partner_state & STATE_AGGREGATION) &&
> +			    (port->actor_state & STATE_AGGREGATION))
> +			PARTNER_STATE_SET(port, SYNCHRONIZATION);
> +		else
> +			PARTNER_STATE_CLR(port, SYNCHRONIZATION);
> +
> +		if (ACTOR_STATE(port, LACP_SHORT_TIMEOUT))
> +			timer_set(&port->current_while_timer, BOND_8023AD_SHORT_TIMEOUT_MS);
> +		else
> +			timer_set(&port->current_while_timer, BOND_8023AD_LONG_TIMEOUT_MS);
> +
> +		ACTOR_STATE_CLR(port, EXPIRED);
> +		return; /* No state change */
> +	}
> +
> +	/* If CURRENT state timer is not running (stopped or expired)
> +	 * transit to EXPIRED state from DISABLED or CURRENT */
> +	if (!timer_is_running(&port->current_while_timer)) {
> +		ACTOR_STATE_SET(port, EXPIRED);
> +		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
> +		PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
> +		timer_set(&port->current_while_timer, BOND_8023AD_SHORT_TIMEOUT_MS);
> +	}
> +}
> +
> +/**
> + * Function handles periodic tx state machine.
> + *
> + * Function implements Periodic Transmission state machine from point 5.4.13
> + * in 802.1AX documentation. It should be called periodically.
> + *
> + * @param port			Port to handle state machine.
> + */
> +static void
> +periodic_machine(struct bond_dev_private *internals, uint8_t port_num)
> +{
> +	struct port *port = &internals->mode4.port_list[port_num];
> +	/* Calculate if either site is LACP enabled */
> +	uint32_t timeout;
> +	uint8_t active = ACTOR_STATE(port, LACP_ACTIVE) ||
> +		PARTNER_STATE(port, LACP_ACTIVE);
> +
> +	uint8_t is_partner_fast, was_partner_fast;
> +	/* No periodic is on BEGIN, LACP DISABLE or when both sides are pasive */
> +	if (SM_FLAG(port, BEGIN) || !SM_FLAG(port, LACP_ENABLED) ||
> +		    active == 0) {
> +		timer_cancel(&port->periodic_timer);
> +		timer_force_expired(&port->tx_machine_timer);
> +		SM_FLAG_CLR(port, PARTNER_SHORT_TIMEOUT);
> +
> +		MODE4_DEBUG("-> NO_PERIODIC ( %s%s%s)\n",
> +			SM_FLAG(port, BEGIN) ? "begind " : "",
> +			SM_FLAG(port, LACP_ENABLED) ? "" : "LACP disabled ",
> +			active ? "LACP active " : "LACP pasive ");
> +		return;
> +	}
> +
> +	is_partner_fast = PARTNER_STATE(port, LACP_SHORT_TIMEOUT);
> +	was_partner_fast = SM_FLAG(port, PARTNER_SHORT_TIMEOUT);
> +
> +	/* If periodic timer is not started, transit from NO PERIODIC to FAST/SLOW.
> +	 * Other case: check if timer expire or partners settings changed. */
> +	if (!timer_is_stopped(&port->periodic_timer)) {
> +		if (timer_is_expired(&port->periodic_timer)) {
> +			SM_FLAG_SET(port, NTT);
> +		} else if (is_partner_fast != was_partner_fast) {
> +			/* Partners timeout  was slow and now it is fast -> send LACP.
> +			 * In other case (was fast and now it is slow) just switch
> +			 * timeout to slow without forcing send of LACP (because standard
> +			 * say so)*/
> +			if (!is_partner_fast)
> +				SM_FLAG_SET(port, NTT);
> +		} else
> +			return; /* Nothing changed */
> +	}
> +
> +	/* Handle state transition to FAST/SLOW LACP timeout */
> +	if (is_partner_fast) {
> +		timeout = BOND_8023AD_FAST_PERIODIC_MS;
> +		SM_FLAG_SET(port, PARTNER_SHORT_TIMEOUT);
> +	} else {
> +		timeout = BOND_8023AD_SLOW_PERIODIC_MS;
> +		SM_FLAG_CLR(port, PARTNER_SHORT_TIMEOUT);
> +	}
> +
> +	timer_set(&port->periodic_timer, timeout);
> +}
> +
> +/**
> + * Function handles mux state machine.
> + *
> + * Function implements Mux Machine from point 5.4.15 in 802.1AX documentation.
> + * It should be called periodically.
> + *
> + * @param port			Port to handle state machine.
> + */
> +static int
> +mux_machine(struct bond_dev_private *internals, uint8_t port_num)
> +{
> +	bool ntt = false;
> +	struct port *port = &internals->mode4.port_list[port_num];
> +
> +	/* Save current state for later use */
> +	const uint8_t state_mask = STATE_SYNCHRONIZATION | STATE_DISTRIBUTING |
> +		STATE_COLLECTING;
> +
> +	/* Enter DETACHED state on BEGIN condition or from any other state if
> +	 * port was unselected */
> +	if (SM_FLAG(port, BEGIN) ||
> +			port->selected == UNSELECTED || (port->selected == STANDBY &&
> +				(port->actor_state & state_mask) != 0)) {
> +		/* detach mux from aggregator not used */
> +		port->actor_state &= ~state_mask;
> +		/* Set ntt to true if BEGIN condition or transition from any other state
> +		 * which is indicated that wait_while_timer was started */
> +		if (SM_FLAG(port, BEGIN) ||
> +				!timer_is_stopped(&port->wait_while_timer)) {
> +			SM_FLAG_SET(port, NTT);
> +			MODE4_DEBUG("-> DETACHED\n");
> +		}
> +		timer_cancel(&port->wait_while_timer);
> +	}
> +
> +	if (timer_is_stopped(&port->wait_while_timer)) {
> +		if (port->selected == SELECTED || port->selected == STANDBY) {
> +			timer_set(&port->wait_while_timer,
> +				BOND_8023AD_AGGREGATE_WAIT_TIMEOUT_MS);
> +
> +			MODE4_DEBUG("DETACHED -> WAITING\n");
> +		}
> +		/* Waiting state entered */
> +		return 0;
> +	}
> +
> +	/* Transit next state if port is ready */
> +	if (!timer_is_expired(&port->wait_while_timer))
> +		return 0;
> +
> +	if ((ACTOR_STATE(port, DISTRIBUTING) || ACTOR_STATE(port, COLLECTING)) &&
> +		!PARTNER_STATE(port, SYNCHRONIZATION)) {
> +		/* If in COLLECTING or DISTRIBUTING state and partner becomes out of
> +		 * sync transit to ATACHED state.  */
> +		ACTOR_STATE_CLR(port, DISTRIBUTING);
> +		ACTOR_STATE_CLR(port, COLLECTING);
> +		/* Clear actor sync to activate transit ATACHED in condition bellow */
> +		ACTOR_STATE_CLR(port, SYNCHRONIZATION);
> +		MODE4_DEBUG("Out of sync -> ATTACHED\n");
> +	} else if (!ACTOR_STATE(port, SYNCHRONIZATION)) {
> +		/* attach mux to aggregator */
> +		RTE_VERIFY((port->actor_state & (STATE_COLLECTING |
> +			STATE_DISTRIBUTING)) == 0);
> +		ACTOR_STATE_SET(port, SYNCHRONIZATION);
> +		ntt = true;
> +		MODE4_DEBUG("ATTACHED Entered\n");
> +	} else if (!ACTOR_STATE(port, COLLECTING)) {
> +		/* Start collecting if in sync */
> +		if (PARTNER_STATE(port, SYNCHRONIZATION)) {
> +			MODE4_DEBUG("ATTACHED -> COLLECTING\n");
> +			ACTOR_STATE_SET(port, COLLECTING);
> +		}
> +	} else if (ACTOR_STATE(port, COLLECTING)) {
> +		/* Check if partner is in COLLECTING state. If so this port can
> +		 * distribute frames to it */
> +		if (!ACTOR_STATE(port, DISTRIBUTING)) {
> +			if (PARTNER_STATE(port, COLLECTING)) {
> +				/* Enable  DISTRIBUTING if partner is collecting */
> +				ACTOR_STATE_SET(port, DISTRIBUTING);
> +				ntt = true;
> +				MODE4_DEBUG("COLLECTING -> DISTRIBUTING\n");
> +			}
> +		} else {
> +			if (!PARTNER_STATE(port, COLLECTING)) {
> +				/* Disable DISTRIBUTING (enter COLLECTING state) if partner
> +				 * is not collecting */
> +				ACTOR_STATE_CLR(port, DISTRIBUTING);
> +				ntt = true;
> +				MODE4_DEBUG("DISTRIBUTING -> COLLECTING\n");
> +			}
> +		}
> +	}
> +
> +	if (ntt != false)
> +		SM_FLAG_SET(port, NTT);
> +
> +	return ntt;
> +}
> +
> +/**
> + * Function handles transmit state machine.
> + *
> + * Function implements Transmit Machine from point 5.4.16 in 802.1AX
> + * documentation.
> + *
> + * @param port
> + */
> +static void
> +tx_machine(struct rte_eth_dev *bond_dev, uint8_t port_num)
> +{
> +	struct bond_dev_private *internals = bond_dev->data->dev_private;
> +	struct port *port = &internals->mode4.port_list[port_num];
> +	struct mode8023ad_data *data = &internals->mode4;
> +
> +	struct slow_protocol_msg *msg = NULL;
> +	struct lacpdu_header *hdr;
> +	struct lacpdu *lacpdu;
> +
> +	/* If periodic timer is not running periodic machine is in NO PERIODIC and
> +	 * acording to 802.3ax standard tx machine should not transmit any frames
> +	 * and set ntt to false. */
> +	if (timer_is_stopped(&port->periodic_timer))
> +		SM_FLAG_CLR(port, NTT);
> +
> +	if (!SM_FLAG(port, NTT) || !timer_is_expired(&port->tx_machine_timer))
> +		return;
> +
> +	/* If all conditions are met construct packet to send */
> +	if (rte_ring_dequeue(data->free_ring, (void **)&msg) == -ENOBUFS) {
> +		MODE4_DEBUG("tx_machine: no free_lacpdu_ring\n");
> +		return;
> +	}
> +
> +	msg->pkt = rte_pktmbuf_alloc(data->mbuf_pool);
> +	if (msg->pkt == NULL) {
> +		rte_ring_enqueue(data->free_ring, msg);
> +		RTE_LOG(ERR, PMD, "Failed to allocate LACP packet from pool\n");
> +		return;
> +	}
> +
> +	msg->port_id = internals->active_slaves[port_num];
> +	hdr = rte_pktmbuf_mtod(msg->pkt, struct lacpdu_header *);
> +
> +	msg->pkt->data_len = sizeof(*hdr);
> +	msg->pkt->pkt_len = sizeof(*hdr);
> +	/* Source and destination MAC */
> +	ether_addr_copy(&lacp_mac_addr, &hdr->eth_hdr.d_addr);
> +	ether_addr_copy(&port->actor.system, &hdr->eth_hdr.s_addr);
> +	hdr->eth_hdr.ether_type = rte_cpu_to_be_16(ETHER_TYPE_SLOW);
> +
> +	lacpdu = &hdr->lacpdu;
> +	memset(lacpdu, 0, sizeof(*lacpdu));
> +
> +	/* Initialize LACP part */
> +	lacpdu->subtype = SUBTYPE_LACP;
> +	lacpdu->version_number = 1;
> +
> +	/* ACTOR */
> +	lacpdu->actor.tlv_type_info = TLV_TYPE_ACTOR_INFORMATION;
> +	lacpdu->actor.info_length = sizeof(struct lacpdu_actor_partner_params);
> +	memcpy(&hdr->lacpdu.actor.port_params, &port->actor,
> +			sizeof(port->actor));
> +	lacpdu->actor.state = port->actor_state;
> +
> +	/* PARTNER */
> +	lacpdu->partner.tlv_type_info = TLV_TYPE_PARTNER_INFORMATION;
> +	lacpdu->partner.info_length = sizeof(struct lacpdu_actor_partner_params);
> +	memcpy(&lacpdu->partner.port_params, &port->partner,
> +			sizeof(struct port_params));
> +	lacpdu->partner.state = port->partner_state;
> +
> +	/* Other fields */
> +	lacpdu->tlv_type_collector_info = TLV_TYPE_COLLECTOR_INFORMATION;
> +	lacpdu->collector_info_length = 0x10;
> +	lacpdu->collector_max_delay = 0;
> +
> +	lacpdu->tlv_type_terminator = TLV_TYPE_TERMINATOR_INFORMATION;
> +	lacpdu->terminator_length = 0;
> +
> +	if (rte_ring_enqueue(data->tx_ring, msg) == -ENOBUFS) {
> +		/* If TX ring full, drop packet and free message. Retransmission
> +		 * will happen in next function call. */
> +		rte_pktmbuf_free(msg->pkt);
> +		rte_ring_enqueue(data->free_ring, msg);
> +
> +		RTE_LOG(ERR, PMD, "Failed to enqueue LACP packet into tx ring.\n"
> +			"Receive and transmit functions must be invoked on bonded interface"
> +			" at least 10 times per second or LACP will not work correctly\n");
> +		return;
> +	}
> +
> +	MODE4_DEBUG("sending LACP frame\n");
> +	BOND_PRINT_LACP(lacpdu);
> +
> +	SM_FLAG_CLR(port, NTT);
> +	/* Add 10% random backoff time to better distribute slow packets
> +	 * between tx bursts. */
> +	timer_set(&port->tx_machine_timer, BOND_8023AD_TX_PERIOD_MS +
> +		rand() % ((BOND_8023AD_TX_PERIOD_MS * 10) / 100));
> +}
> +
> +/**
> + * Function assigns port to aggregator.
> + *
> + * @param bond_dev_private	Pointer to bond_dev_private structure.
> + * @param port_pos			Port to assign.
> + */
> +static void
> +selection_logic(struct bond_dev_private *internals, uint8_t port_num)
> +{
> +	struct mode8023ad_data *data = &internals->mode4;
> +	struct port *agg, *port, *port_list;
> +	uint8_t ports_count;
> +	uint8_t i;
> +
> +	ports_count = internals->slave_count;
> +	port_list = data->port_list;
> +	port = &port_list[port_num];
> +
> +	/* Skip port if it is selected */
> +	if (port->selected == SELECTED)
> +		return;
> +
> +	/* Search for aggregator suitable for this port */
> +	for (i = 0; i < ports_count; ++i) {
> +		agg = &port_list[i];
> +		/* Skip ports that are not aggreagators */
> +		if (agg->agregator_idx != i && i == port_num)
> +			continue;
> +
> +		/* Actors system ID is not checked since all slave device have the same
> +		 * ID (MAC address). */
> +		if ((agg->actor.key == port->actor.key &&
> +			agg->partner.system_priority == port->partner.system_priority &&
> +			is_same_ether_addr(&agg->partner.system, &port->partner.system) == 1
> +			&& (agg->partner.key == port->partner.key)) &&
> +			is_zero_ether_addr(&port->partner.system) != 1 &&
> +			(agg->actor.key &
> +				rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY)) != 0) {
> +
> +			port->agregator_idx = i;
> +			break;
> +		}
> +	}
> +
> +	/* By default, port uses it self as agregator */
> +	if (i == ports_count)
> +		port->agregator_idx = port_num;
> +
> +	port->selected = SELECTED;
> +
> +	MODE4_DEBUG("-> SELECTED: ID=%3u pos=%3u\n"
> +		"\t%s ID=%3u pos=%3u\n",
> +		internals->active_slaves[port_num], port_num,
> +		port->agregator_idx == port_num ?
> +			"agregator not found, using default" : "agregator found",
> +		port->agregator_idx,
> +		internals->active_slaves[port->agregator_idx]);
> +}
> +
> +/**
> + * Helper function which updates current port
> + */
> +static void
> +update_mux_slaves(struct bond_dev_private *internals)
> +{
> +	struct mode8023ad_data *data = &internals->mode4;
> +	struct port *port;
> +	uint8_t current[RTE_MAX_ETHPORTS];
> +	uint8_t count = 0;
> +	uint8_t i;
> +
> +	for (i = 0; i < internals->slave_count; i++) {
> +		port = &data->port_list[i];
> +		if (ACTOR_STATE(port, DISTRIBUTING))
> +			current[count++] = i;
> +	}
> +
> +	memcpy(data->distibuting_slaves_offsets, current,
> +			sizeof(current[0]) * count);
> +	data->distibuting_slaves_count = count;
> +}
> +
> +/* Function maps DPDK speed to bonding speed stored in key field */
> +static uint16_t
> +link_speed_key(uint16_t speed) {
> +	uint16_t key_speed;
> +
> +	switch (speed) {
> +	case ETH_LINK_SPEED_AUTONEG:
> +		key_speed = 0x00;
> +		break;
> +	case ETH_LINK_SPEED_10:
> +		key_speed = BOND_LINK_SPEED_KEY_10M;
> +		break;
> +	case ETH_LINK_SPEED_100:
> +		key_speed = BOND_LINK_SPEED_KEY_100M;
> +		break;
> +	case ETH_LINK_SPEED_1000:
> +		key_speed = BOND_LINK_SPEED_KEY_1000M;
> +		break;
> +	case ETH_LINK_SPEED_10G:
> +		key_speed = BOND_LINK_SPEED_KEY_10G;
> +		break;
> +	case ETH_LINK_SPEED_20G:
> +		key_speed = BOND_LINK_SPEED_KEY_20G;
> +		break;
> +	case ETH_LINK_SPEED_40G:
> +		key_speed = BOND_LINK_SPEED_KEY_40G;
> +		break;
> +	default:
> +		/* Unknown speed*/
> +		key_speed = 0xFFFF;
> +	}
> +
> +	return key_speed;
> +}
> +
> +static void
> +bond_mode_8023ad_periodic_cb(void *arg)
> +{
> +	struct rte_eth_dev *bond_dev = arg;
> +	struct bond_dev_private *internals = bond_dev->data->dev_private;
> +	struct mode8023ad_data *data = &internals->mode4;
> +
> +	struct port *port;
> +	struct slow_protocol_frame *slow_hdr;
> +	struct rte_eth_link link_info;
> +	struct ether_addr slave_addr;
> +
> +	struct slow_protocol_msg *msgs[BOND_MODE_8023AX_RX_RING_SIZE];
> +	uint16_t port_num, j, nb_msgs;
> +	/* if not 0 collecting/distibuting array need update */
> +	uint16_t slaves_changed = 0;
> +	bool machines_invoked;
> +
> +	/* Update link status on each port */
> +	for (port_num = 0; port_num < internals->active_slave_count; port_num++) {
> +		uint16_t key;
> +
> +		rte_eth_link_get(internals->active_slaves[port_num], &link_info);
> +		rte_eth_macaddr_get(internals->active_slaves[port_num], &slave_addr);
> +
> +		if (link_info.link_status != 0) {
> +			key = link_speed_key(link_info.link_speed) << 1;
> +			if (link_info.link_duplex == ETH_LINK_FULL_DUPLEX)
> +				key |= BOND_LINK_FULL_DUPLEX_KEY;
> +		} else
> +			key = 0;
> +
> +		port = &data->port_list[port_num];
> +		key = rte_cpu_to_be_16(key);
> +
> +		if (key != port->actor.key) {
> +			port->actor.key = key;
> +			SM_FLAG_SET(port, NTT);
> +		}
> +
> +		if (!is_same_ether_addr(&port->actor.system, &slave_addr)) {
> +			SM_FLAG_SET(port, NTT);
> +			ether_addr_copy(&slave_addr, &port->actor.system);
> +		}
> +	}
> +
> +	nb_msgs = (uint16_t)rte_ring_dequeue_burst(data->rx_ring, (void **) msgs,
> +		BOND_MODE_8023AX_RX_RING_SIZE);
> +
> +	for (port_num = 0; port_num < internals->active_slave_count; port_num++) {
> +		port = &data->port_list[port_num];
> +		if ((port->actor.key &
> +				rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY)) == 0) {
> +
> +			SM_FLAG_SET(port, BEGIN);
> +
> +			/* LACP is disabled on half duples or link is down */
> +			if (SM_FLAG(port, LACP_ENABLED)) {
> +				/* If port was enabled set it to BEGIN state */
> +				SM_FLAG_CLR(port, LACP_ENABLED);
> +				ACTOR_STATE_CLR(port, DISTRIBUTING);
> +				ACTOR_STATE_CLR(port, COLLECTING);
> +				slaves_changed++;
> +			}
> +
> +			MODE4_DEBUG("Port %u is not LACP capable!\n",
> +				internals->active_slaves[port_num]);
> +			/* Skip this port processing */
> +			continue;
> +		}
> +
> +		SM_FLAG_SET(port, LACP_ENABLED);
> +		machines_invoked = false;
> +		/* Find LACP packet */
> +		for (j = 0; j < nb_msgs; j++) {
> +			if (msgs[j] == NULL || msgs[j]->port_id !=
> +					internals->active_slaves[port_num])
> +				continue;
> +
> +			slow_hdr = rte_pktmbuf_mtod(msgs[j]->pkt,
> +					struct slow_protocol_frame *);
> +
> +			if (slow_hdr->slow_protocol.subtype == SLOW_SUBTYPE_LACP) {
> +				/* This is LACP frame so pass it to rx_machine */
> +				struct lacpdu *lacp = (struct lacpdu *)&slow_hdr->slow_protocol;
> +				/* Invoke state machines on every active slave port */
> +				rx_machine(internals, port_num, lacp);
> +				periodic_machine(internals, port_num);
> +				slaves_changed += mux_machine(internals, port_num);
> +				tx_machine(bond_dev, port_num);
> +				selection_logic(internals, port_num);
> +
> +				machines_invoked = true;
> +			} else if (slow_hdr->slow_protocol.subtype == SLOW_SUBTYPE_MARKER) {
> +				struct marker *marker;
> +
> +				marker = (struct marker *) &slow_hdr->slow_protocol;
> +				if (marker->tlv_type_marker == MARKER_TLV_TYPE_MARKER_INFO) {
> +					/* Reuse received packet to send frame to Marker Responder
> +					 */
> +					marker->tlv_type_marker = MARKER_TLV_TYPE_MARKER_RESP;
> +
> +					/* Update source MAC, destination MAC is multicast so we
> +					 * don't update it */
> +					mac_address_get(bond_dev, &slow_hdr->eth_hdr.s_addr);
> +
> +					if (rte_ring_enqueue(data->tx_ring, msgs[j]) == -ENOBUFS) {
> +						RTE_LOG(ERR, PMD,
> +						"Failed to enqueue packet into tx ring");
> +						rte_pktmbuf_free(msgs[j]->pkt);
> +						rte_ring_enqueue(data->free_ring, msgs[j]);
> +					}
> +
> +					msgs[j] = NULL;
> +				}
> +			}
> +		}
> +
> +		if (machines_invoked == false) {
> +			rx_machine(internals, port_num, NULL);
> +			periodic_machine(internals, port_num);
> +			slaves_changed += mux_machine(internals, port_num);
> +			tx_machine(bond_dev, port_num);
> +			selection_logic(internals, port_num);
> +			machines_invoked = true;
> +		}
> +
> +		SM_FLAG_CLR(port, BEGIN);
> +	}
> +
> +	/* Update mux if something changed */
> +	if (slaves_changed > 0) {
> +		update_mux_slaves(internals);
> +		MODE4_DEBUG("mux count %u [%2u%s%2u%s%2u%s%2u%s%s]\n",
> +			data->distibuting_slaves_count,
> +			data->distibuting_slaves_offsets[0],
> +			data->distibuting_slaves_count > 0 ? " " : "\b\b",
> +			data->distibuting_slaves_offsets[1],
> +			data->distibuting_slaves_count > 1 ? " " : "\b\b",
> +			data->distibuting_slaves_offsets[2],
> +			data->distibuting_slaves_count > 2 ? " " : "\b\b",
> +			data->distibuting_slaves_offsets[3],
> +			data->distibuting_slaves_count > 3 ? " " : "\b\b",
> +			data->distibuting_slaves_count > 4 ? "..." : "");
> +	}
> +
> +	/* Free packets that was not reused */
> +	for (port_num = 0; port_num < nb_msgs; port_num++) {
> +		if (msgs[port_num] != NULL) {
> +			rte_pktmbuf_free(msgs[port_num]->pkt);
> +			rte_ring_enqueue(data->free_ring, msgs[port_num]);
> +		}
> +	}
> +
> +	rte_eal_alarm_set(BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000,
> +			bond_mode_8023ad_periodic_cb, arg);
> +}
> +
> +static void
> +bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev, uint8_t slave_idx)
> +{
> +	struct bond_dev_private *internals = bond_dev->data->dev_private;
> +	struct mode8023ad_data *data = &internals->mode4;
> +
> +	struct port *port = &data->port_list[internals->active_slave_count];
> +	struct port_params initial = {
> +			.system = { { 0 } },
> +			.system_priority = rte_cpu_to_be_16(0xFFFF),
> +			.key = rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY),
> +			.port_priority = rte_cpu_to_be_16(0x00FF),
> +			.port_number = 0,
> +	};
> +
> +	uint8_t slave_id = internals->active_slaves[slave_idx];
> +
> +	memcpy(&port->actor, &initial, sizeof(struct port_params));
> +	port->actor.port_number = slave_id_to_port_number(slave_id);
> +
> +	memcpy(&port->partner, &initial, sizeof(struct port_params));
> +
> +	/* default states */
> +	port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
> +	port->partner_state = STATE_LACP_ACTIVE;
> +	port->sm_flags = SM_FLAGS_BEGIN;
> +
> +	/* use this port as agregator */
> +	port->agregator_idx = slave_idx;
> +
> +	rte_eth_promiscuous_enable(slave_id);
> +}
> +
> +void
> +bond_mode_8023ad_slave_append(struct rte_eth_dev *bond_dev)
> +{
> +	struct bond_dev_private *internals = bond_dev->data->dev_private;
> +
> +	bond_mode_8023ad_activate_slave(bond_dev, internals->active_slave_count);
> +}
> +
> +int
> +bond_mode_8023ad_deactivate_slave(struct rte_eth_dev *bond_dev,
> +		uint8_t slave_pos)
> +{
> +	struct bond_dev_private *internals = bond_dev->data->dev_private;
> +	struct mode8023ad_data *data = &internals->mode4;
> +	struct port *port;
> +	uint8_t i;
> +
> +	bond_mode_8023ad_stop(bond_dev);
> +
> +	/* Exclude slave from transmit policy. If this slave is an aggregator
> +	 * make all aggregated slaves unselected to force sellection logic
> +	 * to select suitable aggregator for this port	 */
> +	for (i = 0; i < internals->active_slave_count; i++) {
> +		port = &data->port_list[slave_pos];
> +		if (port->agregator_idx == slave_pos) {
> +			port->selected = UNSELECTED;
> +			port->actor_state &= ~(STATE_SYNCHRONIZATION | STATE_DISTRIBUTING |
> +				STATE_COLLECTING);
> +
> +			/* Use default aggregator */
> +			port->agregator_idx = i;
> +		}
> +	}
> +
> +	port = &data->port_list[slave_pos];
> +
> +	update_mux_slaves(internals);
> +
> +	/* Remove slave port config */
> +	if (slave_pos + 1 < internals->active_slave_count) {
> +		memmove(&data->port_list[slave_pos],
> +			&data->port_list[slave_pos + 1],
> +			sizeof(data->port_list[0]) * (internals->active_slave_count -
> +				slave_pos - 1));
> +	}
> +
> +	if (bond_dev->data->dev_started)
> +		return bond_mode_8023ad_start(bond_dev);
> +
> +	return 0;
> +}
> +
> +int
> +bond_mode_8023ad_init(struct rte_eth_dev *bond_dev)
> +{
> +	struct bond_dev_private *internals = bond_dev->data->dev_private;
> +	struct mode8023ad_data *data = &internals->mode4;
> +	char mem_name[RTE_ETH_NAME_MAX_LEN];
> +	int socket_id = bond_dev->pci_dev->numa_node;
> +	uint8_t i;
> +
> +	if (data->mbuf_pool == NULL) {
> +		const uint16_t element_size = sizeof(struct slow_protocol_frame) +
> +			sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM;
> +
> +		snprintf(mem_name, sizeof(mem_name), "%s_POOL",	bond_dev->data->name);
> +		data->mbuf_pool = rte_mempool_create(mem_name,
> +			 /* FIXME: How big memory pool should be? If driver will not
> +			  * free packets quick enough there will be ENOMEM in tx_machine.
> +			  * For now give 512 packets per slave. Hope it will be enough. */
> +			(BOND_MODE_8023AX_TX_RING_SIZE + 1) * 512 * RTE_MAX_ETHPORTS,
> +			element_size,
> +			RTE_MEMPOOL_CACHE_MAX_SIZE >= 32 ? 32 : RTE_MEMPOOL_CACHE_MAX_SIZE,
> +			sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init,
> +			NULL, rte_pktmbuf_init, NULL, socket_id, 0);
> +
> +		/* Any memory allocation failure in initalization is critical because
> +		 * resources can't be free, so reinitialization is impossible. */
> +		if (data->mbuf_pool == NULL) {
> +			RTE_LOG(ERR, PMD, "%s: Failed to initialize LACP rx ring\n",
> +				bond_dev->data->name);
> +
> +			rte_panic("Failed to alocate memory pool ('%s')\n"
> +				"for bond device '%s'\n", mem_name, bond_dev->data->name);
> +		}
> +
> +		/* Setup ring for free messages that can be used in RX/TX burst */
> +		snprintf(mem_name, sizeof(mem_name), "%s_free",	bond_dev->data->name);
> +
> +		uint16_t free_cnt = BOND_MODE_8023AX_RX_RING_SIZE +
> +			BOND_MODE_8023AX_TX_RING_SIZE;
> +
> +		data->free_ring = rte_ring_create(mem_name, free_cnt, socket_id, 0);
> +
> +		if (data->free_ring == NULL) {
> +			rte_panic("%s: Failed to create slow messages free ring\n",
> +				bond_dev->data->name);
> +		}
> +
> +		for (i = 0; i < free_cnt; i++) {
> +			struct slow_protocol_msg *msg;
> +
> +			snprintf(mem_name, sizeof(mem_name), "%s_slow_msg_%u",
> +				bond_dev->data->name, i);
> +
> +			msg = (struct slow_protocol_msg *) rte_malloc_socket(mem_name,
> +				sizeof(struct slow_protocol_msg), 0, socket_id);
> +
> +			if (msg == NULL) {
> +				rte_panic("%s: Failed to allocate slow message\n",
> +				bond_dev->data->name);
> +			}
> +
> +			rte_ring_enqueue(data->free_ring, msg);
> +		}
> +
> +		/* Setup rings for usage in rx/tx bursts and machines state
> +		 * call back */
> +		snprintf(mem_name, sizeof(mem_name), "%s_rx", bond_dev->data->name);
> +		data->rx_ring = rte_ring_create(mem_name,
> +				BOND_MODE_8023AX_RX_RING_SIZE, socket_id, 0);
> +
> +		if (data->rx_ring == NULL) {
> +			rte_panic("%s: Failed to create slow messages rx ring\n",
> +					bond_dev->data->name);
> +		}
> +
> +		snprintf(mem_name, sizeof(mem_name), "%s_tx", bond_dev->data->name);
> +		data->tx_ring = rte_ring_create(mem_name, BOND_MODE_8023AX_TX_RING_SIZE,
> +			socket_id, RING_F_SP_ENQ);
> +
> +		if (data->tx_ring == NULL) {
> +			rte_panic("%s: Failed to create slow messages tx ring\n",
> +				bond_dev->data->name);
> +		}
> +	}
> +
> +	data->distibuting_slaves_count = 0;
> +
> +	for (i = 0; i < internals->active_slave_count; i++)
> +		bond_mode_8023ad_activate_slave(bond_dev, i);
> +
> +	return 0;
> +}
> +
> +int
> +bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
> +{
> +	return rte_eal_alarm_set(BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000,
> +			&bond_mode_8023ad_periodic_cb, bond_dev);
> +}
> +
> +int
> +bond_mode_8023ad_stop(struct rte_eth_dev *bond_dev)
> +{
> +	if (rte_eal_alarm_cancel(&bond_mode_8023ad_periodic_cb, bond_dev))
> +		return 0;
> +
> +	return -ENOENT;
> +}
> +
> +void
> +bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
> +	uint8_t slave_pos, struct rte_mbuf *slot_pkt)
> +{
> +	struct mode8023ad_data *data;
> +	struct slow_protocol_msg *msg = NULL;
> +	int retval;
> +
> +	data = &internals->mode4;
> +
> +	if (unlikely(rte_ring_dequeue(data->free_ring, (void **)&msg) ==
> +			-ENOBUFS)) {
> +		rte_pktmbuf_free(slot_pkt);
> +		return;
> +	}
> +
> +	msg->pkt = slot_pkt;
> +	msg->port_id = internals->active_slaves[slave_pos];
> +
> +	retval = rte_ring_enqueue(data->rx_ring, msg);
> +	if (unlikely(retval == -ENOBUFS)) {
> +		/* If RX fing full free lacpdu message and drop packet */
> +		rte_ring_enqueue(data->free_ring, msg);
> +		rte_pktmbuf_free(slot_pkt);
> +	}
> +}
> diff --git a/lib/librte_pmd_bond/rte_eth_bond_8023ad.h b/lib/librte_pmd_bond/rte_eth_bond_8023ad.h
> new file mode 100644
> index 0000000..df250bb
> --- /dev/null
> +++ b/lib/librte_pmd_bond/rte_eth_bond_8023ad.h
> @@ -0,0 +1,405 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef RTE_ETH_BOND_8023AD_H_
> +#define RTE_ETH_BOND_8023AD_H_
> +
> +#include <stdint.h>
> +
> +#include <rte_ether.h>
> +#include <rte_byteorder.h>
> +#include <rte_spinlock.h>
> +
> +typedef int	bool;
> +
> +#define true	1
> +#define false	0
> +
> +/**
> + * Timeouts deffinitions (5.4.4 in 802.1AX documentation).
> + */
> +#define BOND_8023AD_FAST_PERIODIC_MS               1000
> +#define BOND_8023AD_SLOW_PERIODIC_MS              30000
> +#define BOND_8023AD_SHORT_TIMEOUT_MS               3000
> +#define BOND_8023AD_LONG_TIMEOUT_MS               90000
> +#define BOND_8023AD_CHURN_DETECTION_TIMEOUT_MS    60000
> +#define BOND_8023AD_AGGREGATE_WAIT_TIMEOUT_MS      2000
> +#define BOND_8023AD_TX_PERIOD_MS                    333
> +/**
> + * Actor/partner states
> + */
> +#define STATE_LACP_ACTIVE                   0x01
> +#define STATE_LACP_SHORT_TIMEOUT            0x02
> +#define STATE_AGGREGATION                   0x04
> +#define STATE_SYNCHRONIZATION               0x08
> +#define STATE_COLLECTING                    0x10
> +#define STATE_DISTRIBUTING                  0x20
> +/** Partners parameters are defaulted */
> +#define STATE_DEFAULTED                     0x40
> +#define STATE_EXPIRED                       0x80
> +
> +/**
> + * State machine flags
> + */
> +#define SM_FLAGS_BEGIN                      0x0001
> +#define SM_FLAGS_LACP_ENABLED               0x0002
> +#define SM_FLAGS_ACTOR_CHURN                0x0004
> +#define SM_FLAGS_PARTNER_CHURN              0x0008
> +#define SM_FLAGS_MOVED                      0x0100
> +#define SM_FLAGS_PARTNER_SHORT_TIMEOUT      0x0200
> +#define SM_FLAGS_NTT                        0x0400
> +
> +#define BOND_MODE_8023AX_UPDATE_TIMEOUT_MS  100
> +#define BOND_MODE_8023AX_RX_RING_SIZE       (2 * RTE_MAX_ETHPORTS)
> +#define BOND_MODE_8023AX_TX_RING_SIZE       (2 * RTE_MAX_ETHPORTS)
> +
> +#define BOND_LINK_FULL_DUPLEX_KEY           0x01
> +#define BOND_LINK_SPEED_KEY_10M             0x02
> +#define BOND_LINK_SPEED_KEY_100M            0x04
> +#define BOND_LINK_SPEED_KEY_1000M           0x08
> +#define BOND_LINK_SPEED_KEY_10G             0x10
> +#define BOND_LINK_SPEED_KEY_20G             0x11
> +#define BOND_LINK_SPEED_KEY_40G             0x12
> +
> +#define SUBTYPE_LACP                        0x01
> +
> +#define TLV_TYPE_ACTOR_INFORMATION          0x01
> +#define TLV_TYPE_PARTNER_INFORMATION        0x02
> +#define TLV_TYPE_COLLECTOR_INFORMATION      0x03
> +#define TLV_TYPE_TERMINATOR_INFORMATION     0x00
> +
> +#define CHECK_FLAGS(_variable, _flags) ((_variable) & (_flags))
> +#define SET_FLAGS(_variable, _flags) ((_variable) |= (_flags))
> +#define CLEAR_FLAGS(_variable, _flags) ((_variable) &= ~(_flags))
> +
> +#define SM_FLAG(port, flag) (!!CHECK_FLAGS((port)->sm_flags, SM_FLAGS_ ## flag))
> +#define SM_FLAG_SET(port, flag) SET_FLAGS((port)->sm_flags, SM_FLAGS_ ## flag)
> +#define SM_FLAG_CLR(port, flag) CLEAR_FLAGS((port)->sm_flags, SM_FLAGS_ ## flag)
> +
> +#define ACTOR_STATE(port, flag) (!!CHECK_FLAGS((port)->actor_state, STATE_ ## flag))
> +#define ACTOR_STATE_SET(port, flag) SET_FLAGS((port)->actor_state, STATE_ ## flag)
> +#define ACTOR_STATE_CLR(port, flag) CLEAR_FLAGS((port)->actor_state, STATE_ ## flag)
> +
> +#define PARTNER_STATE(port, flag) (!!CHECK_FLAGS((port)->partner_state, STATE_ ## flag))
> +#define PARTNER_STATE_SET(port, flag) SET_FLAGS((port)->partner_state, STATE_ ## flag)
> +#define PARTNER_STATE_CLR(port, flag) CLEAR_FLAGS((port)->partner_state, STATE_ ## flag)
> +
> +/** Slow protocol LACP frame subtype */
> +#define SLOW_SUBTYPE_LACP					0x01
> +
> +/** Slow procotol marker frame subtype */
> +#define SLOW_SUBTYPE_MARKER					0x02
> +
> +/** Marker type info request */
> +#define MARKER_TLV_TYPE_MARKER_INFO			0x01
> +
> +/** Marker type info response */
> +#define MARKER_TLV_TYPE_MARKER_RESP			0x02
> +
> +/** Generic slow protocol structure */
> +struct slow_protocol {
> +	uint8_t subtype;
> +	uint8_t reserved_119[119];
> +} __attribute__((__packed__));
> +
> +/** Generic slow protocol frame type structure */
> +struct slow_protocol_frame {
> +	struct ether_hdr eth_hdr;
> +	struct slow_protocol slow_protocol;
> +} __attribute__((__packed__));
> +
> +struct port_params {
> +	uint16_t system_priority;
> +	/**< System priority (unused in current implementation) */
> +	struct ether_addr system;
> +	/**< System ID - Slave MAC address, same as bonding MAC address */
> +	uint16_t key;
> +	/**< Speed information (implementation dependednt) and duplex. */
> +	uint16_t port_priority;
> +	/**< Priority of this (unused in current implementation) */
> +	uint16_t port_number;
> +	/**< Port number. It corresponds to slave port id. */
> +} __attribute__((__packed__));
> +
> +struct lacpdu_actor_partner_params {
> +	uint8_t tlv_type_info;
> +	uint8_t info_length;
> +	struct port_params port_params;
> +	uint8_t state;
> +	uint8_t reserved_3[3];
> +} __attribute__((__packed__));
> +
> +/** LACPDU structure (5.4.2 in 802.1AX documentation). */
> +struct lacpdu {
> +	uint8_t subtype;
> +	uint8_t version_number;
> +
> +	struct lacpdu_actor_partner_params actor;
> +	struct lacpdu_actor_partner_params partner;
> +
> +	uint8_t tlv_type_collector_info;
> +	uint8_t collector_info_length;
> +	uint16_t collector_max_delay;
> +	uint8_t reserved_12[12];
> +
> +	uint8_t tlv_type_terminator;
> +	uint8_t terminator_length;
> +	uint8_t reserved_50[50];
> +} __attribute__((__packed__));
> +
> +/** LACPDU frame: Contains ethernet header and LACPDU. */
> +struct lacpdu_header {
> +	struct ether_hdr eth_hdr;
> +	struct lacpdu lacpdu;
> +} __attribute__((__packed__));
> +
> +struct marker {
> +	uint8_t subtype;
> +	uint8_t version_number;
> +
> +	uint8_t tlv_type_marker;
> +	uint8_t info_length;
> +	uint16_t requester_port;
> +	struct ether_addr requester_system;
> +	uint32_t requester_transaction_id;
> +	uint8_t reserved_2[2];
> +
> +	uint8_t tlv_type_terminator;
> +	uint8_t terminator_length;
> +	uint8_t reserved_90[90];
> +} __attribute__((__packed__));
> +
> +struct marker_header {
> +	struct ether_hdr eth_hdr;
> +	struct marker marker;
> +} __attribute__((__packed__));
> +
> +/** Variables associated with the system (5.4.5 in 802.1AX documentation). */
> +struct system {
> +	struct ether_addr actor_system;
> +	/**< The MAC address component of the System Identifier of the System */
> +	uint16_t actor_system_priority;
> +	/**< The System Priority of the System */
> +};
> +
> +enum selection {
> +	UNSELECTED,
> +	STANDBY,
> +	SELECTED
> +};
> +
> +/** Variables associated with each port (5.4.7 in 802.1AX documentation). */
> +struct port {
> +	/**
> +	 * The operational values of the Actor's state parameters. Bitmask
> +	 * of port states.
> +	 */
> +	uint8_t actor_state;
> +
> +	/** The operational Actor's port parameters */
> +	struct port_params actor;
> +
> +	/**
> +	 * The operational value of the Actor's view of the current values of
> +	 * the Partner's state parameters. The Actor sets this variable either
> +	 * to the value received from the Partner in an LACPDU, or to the value
> +	 * of Partner_Admin_Port_State. Bitmask of port states.
> +	 */
> +	uint8_t partner_state;
> +
> +	/** The operational Partner's port parameters */
> +	struct port_params partner;
> +
> +	/* Additional port parameters not listed in documentation */
> +	/** State machine flags */
> +	uint16_t sm_flags;
> +	enum selection selected;
> +
> +	uint64_t current_while_timer;
> +	uint64_t periodic_timer;
> +	uint64_t wait_while_timer;
> +	uint64_t tx_machine_timer;
> +	/* Agregator parameters */
> +	/**
> +	 * Index in mode8023ad_data::port_list[] of Aggregator
> +	 * the port is currently attached to.
> +	 */
> +	uint16_t agregator_idx;
> +};
> +
> +
> +/**
> + * Struct used to comunicate with 8023ad logic.
> + */
> +struct slow_protocol_msg {
> +	struct rte_mbuf *pkt;
> +	uint8_t port_id;
> +};
> +
> +/** Data specific to mode 802.1AX */
> +struct mode8023ad_data {
> +	/** Memory pool used to allocated rings */
> +	struct rte_mempool *mbuf_pool;
> +
> +	/** Ring containing free slow_protocol_msg objects. Used to avoid
> +	 * alocating/freeing memory in RX/TX bursts */
> +	struct rte_ring *free_ring;
> +
> +	/** Ring of struct slow_protocol_msg from RX burst function */
> +	struct rte_ring *rx_ring;
> +
> +	/** Ring of struct slow_protocol_msg to RX burst function */
> +	struct rte_ring *tx_ring;
> +
> +	/** list of all enslaved ports in mode 802.1AX */
> +	struct port port_list[RTE_MAX_ETHPORTS];
> +
> +	/** List of offsets in active slaves array used to tansmit packets. */
> +	uint8_t distibuting_slaves_offsets[RTE_MAX_ETHPORTS];
> +	uint8_t distibuting_slaves_count;
> +};
> +
> +/* Forward declaration */
> +struct bond_dev_private;
> +
> +/**
> + * Configures 802.1AX mode and all active slaves on bonded interface.
> + *
> + * @param dev Bonded interface
> + * @return
> + *  0 on success, negative value otherwise.
> + */
> +int
> +bond_mode_8023ad_init(struct rte_eth_dev *dev);
> +
> +/**
> + * Deconfigures 802.1AX mode of the bonded interface and slaves.
> + *
> + * @param dev Bonded interface
> + * @return
> + *   0 on success, negative value otherwise.
> + */
> +int bond_mode_8023ad_disable(struct rte_eth_dev *dev);
> +
> +/**
> + * Starts 802.3AX state machines management logic.
> + * @param dev Bonded interface
> + * @return
> + *   0 if machines was started, 1 if machines was already running,
> + *   negative value otherwise.
> + */
> +int
> +bond_mode_8023ad_start(struct rte_eth_dev *dev);
> +
> +/**
> + * Stops 802.3AX state machines management logic.
> + * @param dev Bonded interface
> + * @return
> + *   0 if this call stopped state machines, -ENOENT if alarm was not set.
> + */
> +int
> +bond_mode_8023ad_stop(struct rte_eth_dev *dev);
> +
> +/**
> + * Passes given slow packet to state machines management logic.
> + * @param internals Bonded device private data.
> + * @param slave_pos Possition in active slaves array on which this packet was received.
> + * @param slot_pkt Slow packet
> + */
> +void
> +bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
> +	uint8_t slave_pos, struct rte_mbuf *slot_pkt);
> +
> +/**
> + * Appends and initializes slave active_slaves[slave_num] to use with
> + * 802.1AX mode.
> + *
> + * @pre active_slaves[active_slave_count] must contain valid slave id.
> + * @post active_slave_count must be incremented.
> + *
> + * @param dev       Bonded interface.
> + *
> + * @return
> + *  0 on success, negative value otherwise.
> + */
> +void
> +bond_mode_8023ad_slave_append(struct rte_eth_dev *dev);
> +
> +/**
> + * Denitializes and removes given slave from 802.1AX mode.
> + *
> + * @pre active_slaves[slave_num] must contain valid slave id corresponding to
> + * 		slave initialized in 802.1AX mode.
> + * @post active_slaves[slave_num] must be removed.
> + *
> + * @param dev       Bonded interface.
> + * @param slave_num Position of slave in active_slaves array
> + *
> + * @return
> + *  0 on success, negative value otherwise.
> + *
> + */
> +int
> +bond_mode_8023ad_deactivate_slave(struct rte_eth_dev *dev, uint8_t slave_pos);
> +
> +/**
> + * Converts port_number from network byte order to port id.
> + *
> + * @param port_number The 8023ad port number to convert.
> + * @return corresponding slave id
> + */
> +static inline uint8_t
> +port_number_to_slave_id(uint16_t port_number)
> +{
> +	uint16_t port_id = rte_be_to_cpu_16(port_number);
> +	/* Standard requires that port number must be grater than 0.
> +	 * Substract 1 to get corresponding slave id */
> +	return port_id - 1;
> +}
> +
> +/**
> + * Converts port id to mode 8023ad port number.
> + *
> + * @param slave_id Id of slave to convert.
> + * @return corresponding Port number in network byte order.
> + */
> +static inline uint16_t
> +slave_id_to_port_number(uint8_t slave_id)
> +{
> +	/* Standard requires that port ID must be grater than 0.
> +	 * Add 1 do get corresponding port_number */
> +	uint16_t port_number = (uint16_t)slave_id + 1;
> +	return rte_cpu_to_be_16(port_number);
> +}
> +
> +#endif /* RTE_ETH_BOND_8023AD_H_ */
> diff --git a/lib/librte_pmd_bond/rte_eth_bond_api.c b/lib/librte_pmd_bond/rte_eth_bond_api.c
> index c690ceb..c547164 100644
> --- a/lib/librte_pmd_bond/rte_eth_bond_api.c
> +++ b/lib/librte_pmd_bond/rte_eth_bond_api.c
> @@ -31,6 +31,8 @@
>   *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>   */
>  
> +#include <string.h>
> +
>  #include <rte_mbuf.h>
>  #include <rte_malloc.h>
>  #include <rte_ethdev.h>
> @@ -104,6 +106,44 @@ valid_slave_port_id(uint8_t port_id)
>  	return 0;
>  }
>  
> +void
> +activate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id)
> +{
> +	struct bond_dev_private *internals = eth_dev->data->dev_private;
> +	uint8_t active_count = internals->active_slave_count;
> +
> +	internals->active_slaves[active_count] = port_id;
> +
> +	if (internals->mode == BONDING_MODE_8023AD)
> +		bond_mode_8023ad_slave_append(eth_dev);
> +
> +	internals->active_slave_count = active_count + 1;
> +}
> +
> +void
> +deactivate_slave(struct rte_eth_dev *eth_dev,
> +	uint8_t slave_pos)
> +{
> +	struct bond_dev_private *internals = eth_dev->data->dev_private;
> +	uint8_t active_count = internals->active_slave_count;
> +
> +	if (internals->mode == BONDING_MODE_8023AD)
> +		bond_mode_8023ad_deactivate_slave(eth_dev, slave_pos);
> +
> +	active_count--;
> +
> +	/* If slave was not at the end of the list
> +	 * shift active slaves up active array list */
> +	if (slave_pos < active_count) {
> +		memmove(internals->active_slaves + slave_pos,
> +				internals->active_slaves + slave_pos + 1,
> +				(active_count - slave_pos) *
> +					sizeof(internals->active_slaves[0]));
> +	}
> +
> +	internals->active_slave_count = active_count;
> +}
> +
>  uint8_t
>  number_of_sockets(void)
>  {
> @@ -216,12 +256,8 @@ rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id)
>  	eth_dev->dev_ops = &default_dev_ops;
>  	eth_dev->pci_dev = pci_dev;
>  
> -	if (bond_ethdev_mode_set(eth_dev, mode)) {
> -		RTE_BOND_LOG(ERR, "Failed to set bonded device %d mode too %d",
> -				 eth_dev->data->port_id, mode);
> -		goto err;
> -	}
> -
> +	internals->port_id = eth_dev->data->port_id;
> +	internals->mode = BONDING_MODE_INVALID;
>  	internals->current_primary_port = 0;
>  	internals->balance_xmit_policy = BALANCE_XMIT_POLICY_LAYER2;
>  	internals->user_defined_mac = 0;
> @@ -241,6 +277,12 @@ rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id)
>  	memset(internals->active_slaves, 0, sizeof(internals->active_slaves));
>  	memset(internals->slaves, 0, sizeof(internals->slaves));
>  
> +	if (bond_ethdev_mode_set(eth_dev, mode)) {
> +		RTE_BOND_LOG(ERR, "Failed to set bonded device %d mode too %d",
> +				 eth_dev->data->port_id, mode);
> +		goto err;
> +	}
> +
>  	return eth_dev->data->port_id;
>  
>  err:
> @@ -348,14 +390,12 @@ __eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
>  		rte_eth_link_get_nowait(slave_port_id, &link_props);
>  
>  		 if (link_props.link_status == 1)
> -			internals->active_slaves[internals->active_slave_count++] =
> -					slave_port_id;
> +			activate_slave(bonded_eth_dev, slave_port_id);
>  	}
>  	return 0;
>  
>  }
>  
> -
>  int
>  rte_eth_bond_slave_add(uint8_t bonded_port_id, uint8_t slave_port_id)
>  {
> @@ -380,31 +420,26 @@ rte_eth_bond_slave_add(uint8_t bonded_port_id, uint8_t slave_port_id)
>  	return retval;
>  }
>  
> -
>  static int
>  __eth_bond_slave_remove_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
>  {
> +	struct rte_eth_dev *bonded_eth_dev;
>  	struct bond_dev_private *internals;
>  
> -	int i, slave_idx = -1;
> +	int i, slave_idx;
>  
>  	if (valid_slave_port_id(slave_port_id) != 0)
>  		return -1;
>  
> -	internals = rte_eth_devices[bonded_port_id].data->dev_private;
> +	bonded_eth_dev = &rte_eth_devices[bonded_port_id];
> +	internals = bonded_eth_dev->data->dev_private;
>  
>  	/* first remove from active slave list */
> -	for (i = 0; i < internals->active_slave_count; i++) {
> -		if (internals->active_slaves[i] == slave_port_id)
> -			slave_idx = i;
> +	slave_idx = find_slave_by_id(internals->active_slaves, internals->active_slave_count,
> +			slave_port_id);
>  
> -		/* shift active slaves up active array list */
> -		if (slave_idx >= 0 && i < (internals->active_slave_count - 1))
> -			internals->active_slaves[i] = internals->active_slaves[i+1];
> -	}
> -
> -	if (slave_idx >= 0)
> -		internals->active_slave_count--;
> +	if (slave_idx < internals->active_slave_count)
> +		deactivate_slave(bonded_eth_dev, slave_idx);
>  
>  	slave_idx = -1;
>  	/* now find in slave list */
> @@ -538,6 +573,7 @@ rte_eth_bond_primary_get(uint8_t bonded_port_id)
>  
>  	return internals->current_primary_port;
>  }
> +
>  int
>  rte_eth_bond_slaves_get(uint8_t bonded_port_id, uint8_t slaves[], uint8_t len)
>  {
> @@ -673,7 +709,6 @@ rte_eth_bond_xmit_policy_get(uint8_t bonded_port_id)
>  	return internals->balance_xmit_policy;
>  }
>  
> -
>  int
>  rte_eth_bond_link_monitoring_set(uint8_t bonded_port_id, uint32_t internal_ms)
>  {
> @@ -729,7 +764,6 @@ rte_eth_bond_link_down_prop_delay_get(uint8_t bonded_port_id)
>  	return internals->link_down_delay_ms;
>  }
>  
> -
>  int
>  rte_eth_bond_link_up_prop_delay_set(uint8_t bonded_port_id, uint32_t delay_ms)
>  
> diff --git a/lib/librte_pmd_bond/rte_eth_bond_args.c b/lib/librte_pmd_bond/rte_eth_bond_args.c
> index bbbc69b..a0be0e6 100644
> --- a/lib/librte_pmd_bond/rte_eth_bond_args.c
> +++ b/lib/librte_pmd_bond/rte_eth_bond_args.c
> @@ -171,6 +171,7 @@ bond_ethdev_parse_slave_mode_kvarg(const char *key __rte_unused,
>  	case BONDING_MODE_ACTIVE_BACKUP:
>  	case BONDING_MODE_BALANCE:
>  	case BONDING_MODE_BROADCAST:
> +	case BONDING_MODE_8023AD:
>  		return 0;
>  	default:
>  		RTE_BOND_LOG(ERR, "Invalid slave mode value (%s) specified", value);
> diff --git a/lib/librte_pmd_bond/rte_eth_bond_pmd.c b/lib/librte_pmd_bond/rte_eth_bond_pmd.c
> index 6d0fb1b..13630d9 100644
> --- a/lib/librte_pmd_bond/rte_eth_bond_pmd.c
> +++ b/lib/librte_pmd_bond/rte_eth_bond_pmd.c
> @@ -44,6 +44,7 @@
>  
>  #include "rte_eth_bond.h"
>  #include "rte_eth_bond_private.h"
> +#include "rte_eth_bond_8023ad.h"
>  
>  static uint16_t
>  bond_ethdev_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
> @@ -168,6 +169,56 @@ bond_ethdev_tx_burst_active_backup(void *queue,
>  			bufs, nb_pkts);
>  }
>  
> +static uint16_t
> +bond_ethdev_rx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
> +		uint16_t nb_pkts)
> +{
> +	/* Cast to structure, containing bonded device's port id and queue id */
> +	struct bond_rx_queue *bd_rx_q = (struct bond_rx_queue *)queue;
> +	struct bond_dev_private *internals = bd_rx_q->dev_private;
> +	struct mode8023ad_data *mode4 = &internals->mode4;
> +	struct ether_addr bond_mac;
> +
> +	struct ether_hdr *hdr;
> +	struct rte_mbuf *pkts[nb_pkts + 1]; /* one packet more for slow packet */
> +
> +	uint16_t num_rx_slave = 0;	/* Number of packet received on current slave */
> +	uint16_t num_rx_total = 0;	/* Total number of received packets */
> +
> +	uint8_t i, j;
> +
> +	rte_eth_macaddr_get(internals->port_id, &bond_mac);
> +
> +	for (i = 0; i < internals->active_slave_count && num_rx_total < nb_pkts; i++) {
> +		/* Read packets from this slave */
> +		num_rx_slave = rte_eth_rx_burst(internals->active_slaves[i],
> +				bd_rx_q->queue_id, pkts, nb_pkts + 1 - num_rx_total);
> +
> +		/* Separate slow protocol packets from other packets */
> +		for (j = 0; j < num_rx_slave; j++) {
> +			hdr = rte_pktmbuf_mtod(pkts[j], struct ether_hdr *);
> +
> +			uint16_t ether_type = rte_be_to_cpu_16(hdr->ether_type);
> +			if (unlikely(ether_type == ETHER_TYPE_SLOW)) {
> +				bond_mode_8023ad_handle_slow_pkt(internals, i, pkts[j]);
> +				continue;
> +			}
> +
> +			/* Check if we can receive this packet. Also filter packets if
> +			 * bonding interface is not in promiscuous mode (slaves are always
> +			 * in promiscuous mode). */
> +			if (likely(ACTOR_STATE(&mode4->port_list[i], COLLECTING)) &&
> +					likely(internals->promiscuous_en ||
> +					is_same_ether_addr(&bond_mac, &hdr->d_addr))) {
> +				bufs[num_rx_total++] = pkts[j];
> +			} else
> +				rte_pktmbuf_free(pkts[j]);
> +		}
> +	}
> +
> +	return num_rx_total;
> +}
> +
>  static inline uint16_t
>  ether_hash(struct ether_hdr *eth_hdr)
>  {
> @@ -350,6 +401,126 @@ bond_ethdev_tx_burst_balance(void *queue, struct rte_mbuf **bufs,
>  }
>  
>  static uint16_t
> +bond_ethdev_tx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
> +		uint16_t nb_pkts)
> +{
> +	struct bond_dev_private *internals;
> +	struct mode8023ad_data *mode4;
> +	struct bond_tx_queue *bd_tx_q;
> +
> +	uint8_t num_of_slaves;
> +	uint8_t slaves[RTE_MAX_ETHPORTS];
> +	 /* possitions in slaves, not ID */
> +	uint8_t distributing_offsets[RTE_MAX_ETHPORTS];
> +	uint8_t distributing_slaves_count;
> +
> +	uint16_t num_tx_slave, num_tx_total = 0, tx_fail_total = 0;
> +	uint16_t i, op_slave_idx;
> +
> +	/* Slow packets from 802.3AX state machines. */
> +	struct slow_protocol_msg *slow_msg;
> +
> +	/* Allocate one additional packet in case 8023AD mode.
> +	 * First element if not NULL is slow packet. */
> +	struct rte_mbuf *slave_bufs[RTE_MAX_ETHPORTS][nb_pkts + 1];
> +	/* Total amount of packets in slave_bufs */
> +	uint16_t slave_nb_pkts[RTE_MAX_ETHPORTS] = { 0 };
> +	/* Array of slow packets placed in each slave */
> +	uint8_t slave_slow_packets[RTE_MAX_ETHPORTS] = { 0 };
> +
> +	bd_tx_q = (struct bond_tx_queue *)queue;
> +	internals = bd_tx_q->dev_private;
> +	mode4 = &internals->mode4;
> +
> +	/* Copy slave list to protect against slave up/down changes during tx
> +	 * bursting */
> +	num_of_slaves = internals->active_slave_count;
> +	if (num_of_slaves < 1)
> +		return num_tx_total;
> +
> +	memcpy(slaves, internals->active_slaves, sizeof(slaves[0]) * num_of_slaves);
> +
> +	distributing_slaves_count = mode4->distibuting_slaves_count;
> +	memcpy(distributing_offsets, mode4->distibuting_slaves_offsets,
> +			sizeof(slaves[0]) * distributing_slaves_count);
> +
> +	for (i = 0; i < num_of_slaves; i++)
> +		slave_bufs[i][0] = NULL;
> +
> +	/* It is likely that tx ring will be empty. If it is not empty, it is
> +	 * likely that there will be only one frame. */
> +	while (unlikely(!rte_ring_empty(mode4->tx_ring)) &&
> +			rte_ring_dequeue(mode4->tx_ring, (void **)&slow_msg) != -ENOENT) {
> +		i = find_slave_by_id(slaves, num_of_slaves, slow_msg->port_id);
> +
> +		/* Assign slow packet to slave or drop it if slave is not in active list
> +		 * (ex: link down). */
> +		if (likely(i < num_of_slaves)) {
> +			 /* If there is more than one slow packet to the same slave, send
> +			  * only latest, and drop previouse - tx burst was no called quick
> +			  * enough. */
> +			if (slave_bufs[i][0] != NULL)
> +				rte_pktmbuf_free(slave_bufs[i][0]);
> +
> +			slave_bufs[i][0] = slow_msg->pkt;
> +			slave_nb_pkts[i] = 1;
> +			slave_slow_packets[i] = 1;
> +		} else
> +			rte_pktmbuf_free(slow_msg->pkt);
> +
> +		rte_ring_enqueue(mode4->free_ring, slow_msg);
> +	}
> +
> +	if (likely(distributing_slaves_count > 0)) {
> +		/* Populate slaves mbuf with the packets which are to be sent on it */
> +		for (i = 0; i < nb_pkts; i++) {
> +			/* Select output slave using hash based on xmit policy */
> +			op_slave_idx = xmit_slave_hash(bufs[i], distributing_slaves_count,
> +					internals->balance_xmit_policy);
> +
> +			/* Populate slave mbuf arrays with mbufs for that slave. Use only
> +			 * slaves that are currently distributing. */
> +			uint8_t slave_offset = distributing_offsets[op_slave_idx];
> +			uint16_t pkt_pos = slave_nb_pkts[slave_offset];
> +			slave_nb_pkts[slave_offset]++;
> +
> +			slave_bufs[slave_offset][pkt_pos] = bufs[i];
> +		}
> +	}
> +
> +	/* Send packet burst on each slave device */
> +	for (i = 0; i < num_of_slaves; i++) {
> +		if (slave_nb_pkts[i] > 0) {
> +			num_tx_slave = rte_eth_tx_burst(slaves[i], bd_tx_q->queue_id,
> +					slave_bufs[i], slave_nb_pkts[i]);
> +
> +			/* if tx burst fails move packets to end of bufs */
> +			if (unlikely(num_tx_slave < slave_nb_pkts[i])) {
> +				uint16_t slave_tx_fail_count = slave_nb_pkts[i] - num_tx_slave;
> +
> +				/* Free slow packet if it exists and not send. */
> +				if (slave_slow_packets[i] != 0 && num_tx_slave == 0) {
> +					rte_pktmbuf_free(slave_bufs[i][0]);
> +					slave_tx_fail_count--;
> +				}
> +
> +				tx_fail_total += slave_tx_fail_count;
> +				memcpy(bufs[nb_pkts - tx_fail_total],
> +					slave_bufs[i][num_tx_slave],
> +					slave_tx_fail_count);
> +			}
> +
> +			if (num_tx_slave > 0)
> +				num_tx_slave -= slave_slow_packets[i];
> +
> +			num_tx_total += num_tx_slave;
> +		}
> +	}
> +
> +	return num_tx_total;
> +}
> +
> +static uint16_t
>  bond_ethdev_tx_burst_broadcast(void *queue, struct rte_mbuf **bufs,
>  		uint16_t nb_pkts)
>  {
> @@ -448,6 +619,27 @@ link_properties_valid(struct rte_eth_link *bonded_dev_link,
>  }
>  
>  int
> +mac_address_get(struct rte_eth_dev *eth_dev, struct ether_addr *dst_mac_addr)
> +{
> +	struct ether_addr *mac_addr;
> +
> +	mac_addr = eth_dev->data->mac_addrs;
> +
> +	if (eth_dev == NULL) {
> +		RTE_LOG(ERR, PMD, "%s: NULL pointer eth_dev specified\n", __func__);
> +		return -1;
> +	}
> +
> +	if (dst_mac_addr == NULL) {
> +		RTE_LOG(ERR, PMD, "%s: NULL pointer MAC specified\n", __func__);
> +		return -1;
> +	}
> +
> +	ether_addr_copy(mac_addr, dst_mac_addr);
> +	return 0;
> +}
> +
> +int
>  mac_address_set(struct rte_eth_dev *eth_dev, struct ether_addr *new_mac_addr)
>  {
>  	struct ether_addr *mac_addr;
> @@ -455,7 +647,7 @@ mac_address_set(struct rte_eth_dev *eth_dev, struct ether_addr *new_mac_addr)
>  	mac_addr = eth_dev->data->mac_addrs;
>  
>  	if (eth_dev == NULL) {
> -		RTE_BOND_LOG(ERR,  "NULL pointer eth_dev specified");
> +		RTE_BOND_LOG(ERR, "NULL pointer eth_dev specified");
>  		return -1;
>  	}
>  
> @@ -494,6 +686,8 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
>  			}
>  		}
>  		break;
> +	case BONDING_MODE_8023AD:
> +		break;
>  	case BONDING_MODE_ACTIVE_BACKUP:
>  	default:
>  		for (i = 0; i < internals->slave_count; i++) {
> @@ -544,6 +738,13 @@ bond_ethdev_mode_set(struct rte_eth_dev *eth_dev, int mode)
>  		eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_broadcast;
>  		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst;
>  		break;
> +	case BONDING_MODE_8023AD:
> +		if (bond_mode_8023ad_init(eth_dev) != 0)
> +			return -1;
> +
> +		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst_8023ad;
> +		eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_8023ad;
> +		break;
>  	default:
>  		return -1;
>  	}
> @@ -751,6 +952,8 @@ bond_ethdev_start(struct rte_eth_dev *eth_dev)
>  	if (internals->user_defined_primary_port)
>  		bond_ethdev_primary_set(internals, internals->primary_port);
>  
> +	if (internals->mode == BONDING_MODE_8023AD)
> +		bond_mode_8023ad_start(eth_dev);
>  
>  	if (internals->link_status_polling_enabled)
>  		rte_eal_alarm_set(internals->link_status_polling_interval_ms * 1000,
> @@ -765,6 +968,25 @@ bond_ethdev_stop(struct rte_eth_dev *eth_dev)
>  {
>  	struct bond_dev_private *internals = eth_dev->data->dev_private;
>  
> +	if (internals->mode == BONDING_MODE_8023AD) {
> +		struct mode8023ad_data *data = &internals->mode4;
> +		struct slow_protocol_msg *msg;
> +
> +		bond_mode_8023ad_stop(eth_dev);
> +		data->distibuting_slaves_count = 0;
> +
> +		/* Discard all messages to/from mode 4 state machines */
> +		while (rte_ring_dequeue(data->rx_ring, (void **)&msg) != -ENOENT) {
> +			rte_pktmbuf_free(msg->pkt);
> +			rte_ring_enqueue(data->free_ring, msg);
> +		}
> +
> +		while (rte_ring_dequeue(data->tx_ring, (void **)&msg) != -ENOENT) {
> +			rte_pktmbuf_free(msg->pkt);
> +			rte_ring_enqueue(data->free_ring, msg);
> +		}
> +	}
> +
>  	internals->active_slave_count = 0;
>  	internals->link_status_polling_enabled = 0;
>  
> @@ -832,7 +1054,7 @@ bond_ethdev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
>  					0, dev->pci_dev->numa_node);
>  
>  	if (bd_tx_q == NULL)
> -			return -1;
> +		return -1;
>  
>  	bd_tx_q->queue_id = tx_queue_id;
>  	bd_tx_q->dev_private = dev->data->dev_private;
> @@ -863,7 +1085,6 @@ bond_ethdev_tx_queue_release(void *queue)
>  	rte_free(queue);
>  }
>  
> -
>  static void
>  bond_ethdev_slave_link_status_change_monitor(void *cb_arg)
>  {
> @@ -884,7 +1105,7 @@ bond_ethdev_slave_link_status_change_monitor(void *cb_arg)
>  
>  	/* If device is currently being configured then don't check slaves link
>  	 * status, wait until next period */
> -	if (rte_spinlock_trylock(&internals->lock)){
> +	if (rte_spinlock_trylock(&internals->lock)) {
>  		for (i = 0; i < internals->slave_count; i++) {
>  			if (internals->slaves[i].link_status_polling_enabled) {
>  				slave_ethdev = &rte_eth_devices[internals->slaves[i].port_id];
> @@ -1002,11 +1223,13 @@ bond_ethdev_promiscuous_enable(struct rte_eth_dev *eth_dev)
>  		for (i = 0; i < internals->slave_count; i++)
>  			rte_eth_promiscuous_enable(internals->slaves[i].port_id);
>  		break;
> +	/* In mode4 promiscus mode is managed when slave is added/removed */
> +	case BONDING_MODE_8023AD:
> +		break;
>  	/* Promiscuous mode is propagated only to primary slave */
>  	case BONDING_MODE_ACTIVE_BACKUP:
>  	default:
>  		rte_eth_promiscuous_enable(internals->current_primary_port);
> -
>  	}
>  }
>  
> @@ -1017,7 +1240,7 @@ bond_ethdev_promiscuous_disable(struct rte_eth_dev *dev)
>  	int i;
>  
>  	internals->promiscuous_en = 0;
> -
> +	
>  	switch (internals->mode) {
>  	/* Promiscuous mode is propagated to all slaves */
>  	case BONDING_MODE_ROUND_ROBIN:
> @@ -1026,6 +1249,9 @@ bond_ethdev_promiscuous_disable(struct rte_eth_dev *dev)
>  		for (i = 0; i < internals->slave_count; i++)
>  			rte_eth_promiscuous_disable(internals->slaves[i].port_id);
>  		break;
> +	/* In mode4 promiscus mode is set managed when slave is added/removed */
> +	case BONDING_MODE_8023AD:
> +		break;
>  	/* Promiscuous mode is propagated only to primary slave */
>  	case BONDING_MODE_ACTIVE_BACKUP:
>  	default:
> @@ -1051,7 +1277,8 @@ bond_ethdev_lsc_event_callback(uint8_t port_id, enum rte_eth_event_type type,
>  	struct bond_dev_private *internals;
>  	struct rte_eth_link link;
>  
> -	int i, valid_slave = 0, active_pos = -1;
> +	int i, valid_slave = 0;
> +	uint8_t active_pos;
>  	uint8_t lsc_flag = 0;
>  
>  	if (type != RTE_ETH_EVENT_INTR_LSC || param == NULL)
> @@ -1081,16 +1308,12 @@ bond_ethdev_lsc_event_callback(uint8_t port_id, enum rte_eth_event_type type,
>  		return;
>  
>  	/* Search for port in active port list */
> -	for (i = 0; i < internals->active_slave_count; i++) {
> -		if (port_id == internals->active_slaves[i]) {
> -			active_pos = i;
> -			break;
> -		}
> -	}
> +	active_pos = find_slave_by_id(internals->active_slaves,
> +			internals->active_slave_count, port_id);
>  
>  	rte_eth_link_get_nowait(port_id, &link);
>  	if (link.link_status) {
> -		if (active_pos >= 0)
> +		if (active_pos < internals->active_slave_count)
>  			return;
>  
>  		/* if no active slave ports then set this port to be primary port */
> @@ -1104,21 +1327,19 @@ bond_ethdev_lsc_event_callback(uint8_t port_id, enum rte_eth_event_type type,
>  			link_properties_set(bonded_eth_dev,
>  					&(slave_eth_dev->data->dev_link));
>  		}
> -		internals->active_slaves[internals->active_slave_count++] = port_id;
> +
> +		activate_slave(bonded_eth_dev, port_id);
>  
>  		/* If user has defined the primary port then default to using it */
>  		if (internals->user_defined_primary_port &&
>  				internals->primary_port == port_id)
>  			bond_ethdev_primary_set(internals, port_id);
>  	} else {
> -		if (active_pos < 0)
> +		if (active_pos == internals->active_slave_count)
>  			return;
>  
>  		/* Remove from active slave list */
> -		for (i = active_pos; i < (internals->active_slave_count - 1); i++)
> -			internals->active_slaves[i] = internals->active_slaves[i+1];
> -
> -		internals->active_slave_count--;
> +		deactivate_slave(bonded_eth_dev, active_pos);
>  
>  		/* No active slaves, change link status to down and reset other
>  		 * link properties */
> diff --git a/lib/librte_pmd_bond/rte_eth_bond_private.h b/lib/librte_pmd_bond/rte_eth_bond_private.h
> index 6db5144..77f7bb0 100644
> --- a/lib/librte_pmd_bond/rte_eth_bond_private.h
> +++ b/lib/librte_pmd_bond/rte_eth_bond_private.h
> @@ -42,6 +42,7 @@ extern "C" {
>  #include <rte_spinlock.h>
>  
>  #include "rte_eth_bond.h"
> +#include "rte_eth_bond_8023ad.h"
>  
>  #define PMD_BOND_SLAVE_PORT_KVARG			("slave")
>  #define PMD_BOND_PRIMARY_SLAVE_KVARG		("primary")
> @@ -60,6 +61,8 @@ extern "C" {
>  #define RTE_BOND_LOG(lvl, msg, ...) 		\
>  	RTE_LOG(lvl, PMD, "%s(%d) - " msg "\n", __func__, __LINE__, ##__VA_ARGS__);
>  
> +#define BONDING_MODE_INVALID 0xFF
> +
>  extern const char *pmd_bond_init_valid_arguments[];
>  
>  extern const char *driver_name;
> @@ -89,7 +92,13 @@ struct bond_tx_queue {
>  	/**< Copy of TX configuration structure for queue */
>  };
>  
> -
> +/** Persisted Slave Configuration Structure */
> +struct slave_conf {
> +	uint8_t port_id;
> +	/**< Port Id of slave eth_dev */
> +	struct ether_addr mac_addr;
> +	/**< Slave eth_dev original MAC address */
> +};
>  /** Bonded slave devices structure */
>  struct bond_ethdev_slave_ports {
>  	uint8_t slaves[RTE_MAX_ETHPORTS];	/**< Slave port id array */
> @@ -124,7 +133,7 @@ struct bond_dev_private {
>  	uint8_t user_defined_mac;
>  	/**< Flag for whether MAC address is user defined or not */
>  	uint8_t promiscuous_en;
> -	/**< Enabled/disable promiscuous mode on slave devices */
> +	/**< Enabled/disable promiscuous mode on bonding device */
>  	uint8_t link_props_set;
>  	/**< flag to denote if the link properties are set */
>  
> @@ -143,6 +152,9 @@ struct bond_dev_private {
>  	uint8_t slave_count;			/**< Number of bonded slaves */
>  	struct bond_slave_details slaves[RTE_MAX_ETHPORTS];
>  	/**< Arary of bonded slaves details */
> +	
> +	struct mode8023ad_data mode4;
> +		/**< Mode 4 private data */
>  };
>  
>  extern struct eth_dev_ops default_dev_ops;
> @@ -150,6 +162,21 @@ extern struct eth_dev_ops default_dev_ops;
>  int
>  valid_bonded_ethdev(struct rte_eth_dev *eth_dev);
>  
> +/* Search given slave array to find possition of given id.
> + * Return slave pos or slaves_count if not found. */
> +static inline uint8_t
> +find_slave_by_id(uint8_t *slaves, uint8_t slaves_count,
> +	uint8_t slave_id ) {
> +
> +	uint8_t pos;
> +	for (pos = 0; pos < slaves_count; pos++) {
> +		if (slave_id == slaves[pos])
> +			break;
> +	}
> +
> +	return pos;
> +}
> +
>  int
>  valid_port_id(uint8_t port_id);
>  
> @@ -160,6 +187,14 @@ int
>  valid_slave_port_id(uint8_t port_id);
>  
>  void
> +deactivate_slave(struct rte_eth_dev *eth_dev,
> +	uint8_t slave_pos );
> +
> +void
> +activate_slave(struct rte_eth_dev *eth_dev,
> +	uint8_t port_id );
> +
> +void
>  link_properties_set(struct rte_eth_dev *bonded_eth_dev,
>  		struct rte_eth_link *slave_dev_link);
>  void
> @@ -173,6 +208,9 @@ int
>  mac_address_set(struct rte_eth_dev *eth_dev, struct ether_addr *new_mac_addr);
>  
>  int
> +mac_address_get(struct rte_eth_dev *eth_dev, struct ether_addr *dst_mac_addr);
> +
> +int
>  mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev);
>  
>  uint8_t
> -- 
> 1.7.9.5
> 
> 


More information about the dev mailing list