[dpdk-dev] flow_director_filter error!!
Navneet Rao
navneet.rao at oracle.com
Thu Aug 20 20:56:54 CEST 2015
Thanks John.
I am trying to setup/use the flow-director-filter on the i540.
-- When I try to setup the flow-director-filter as per the example, I am getting "bad arguments"!!!
So decided to see if the flush command would work.
In the interim --- I am using ethertype filter to accomplish the following.
What I am trying to do is this --
Use 2 different i540 cards
Use the igb_uio driver.
Use the testpmd app.
Setup 5 different MAC-ADDRESSes on each port. (using the set mac_addr command)
Setup 5 different RxQs and TxQs on each port.
And then use the testpmd app to generate traffic..
I am assuming that the testpmd app will now send and receive traffic using the 5 different MAC_ADDRESSes..
On each port's receive I will now want to classify on the MAC-ADDRESS and steer the traffic to different queues.
Is there an example/reference on how to achieve this?
Next, I would want to do "classify" on "flexbytes" and send/steer the traffic to different queues using flow-director-filter.
Thanks
-Navneet
-----Original Message-----
From: Mcnamara, John [mailto:john.mcnamara at intel.com]
Sent: Wednesday, August 19, 2015 3:39 PM
To: Navneet Rao; dev at dpdk.org
Subject: RE: [dpdk-dev] flow_director_filter error!!
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Navneet Rao
> Sent: Tuesday, August 18, 2015 4:01 PM
> To: HYPERLINK "mailto:dev at dpdk.org" dev at dpdk.org
> Subject: [dpdk-dev] flow_director_filter error!!
>
> After I start the testpmd app, I am flusing the flow_director_filter
> settings and get the following error -
>
>
>
> testpmd> flush_flow_director 0
>
> PMD: ixgbe_fdir_flush(): Failed to re-initialize FD table.
>
> flow director table flushing error: (Too many open files in system)
Hi,
Are you setting a flow director filter before flushing? If so, could you give an example.
John.
--
More information about the dev
mailing list