[dpdk-dev] [PATCH] doc: add fm10k driver

Mcnamara, John john.mcnamara at intel.com
Wed Dec 9 15:20:42 CET 2015


> -----Original Message-----
> From: Chen, Jing D
> Sent: Wednesday, December 9, 2015 8:25 AM
> To: dev at dpdk.org
> Cc: Mcnamara, John; Chen, Jing D
> Subject: [PATCH] doc: add fm10k driver
> 
> From: "Chen Jing D(Mark)" <jing.d.chen at intel.com>
> 
> This documentation covers introdutions and limitations on Intel
> FM10000 series products.

Hi Mark,

Thanks for that. 

The docs build cleanly but there is one whitespace warning on merge.

Minor comments below.



> @@ -0,0 +1,54 @@
> +..  BSD LICENSE
> +        Copyright(c) 2010-2015 Intel Corporation. All rights reserved.

The year should be 2015 only and this line shouldn't be indented in relation
to the next lines.



> +FM10K Poll Mode Driver
> +======================
> +The FM10K poll mode driver library provides support for Intel FM10000
> +family of 40GbE/100GbE adapters.

The DPDK Documentation Guidelines say to leave a blank line after section
headers (here and with the other sections): 

> +FM10K Poll Mode Driver
> +======================
>
> +The FM10K poll mode driver library provides support for Intel FM10000
> +family of 40GbE/100GbE adapters.

 See:  http://dpdk.org/doc/guides/contributing/documentation.html#rst-guidelines


> +The FM10K poll mode driver library provides support for Intel FM10000
> +family of 40GbE/100GbE adapters.

Might be worth introducing the common FM10K name here as well:

The FM10K poll mode driver library provides support for the Intel FM10000
(FM10K) family of 40GbE/100GbE adapters.

> +Intel FM10000 family of NICs integrate an hardware switch and multiple
> +host interfaces. FM10K PMD driver only manages host interfaces. For the

The doc uses FM10000 in some places and FM10K in others. It should use one
or the other consistently.



> +switch component, another switch driver has to be loaded prior to FM10K
> PMD driver.
> +The switch driver either can be acquired by Intel support or from below
> link:
> +https://github.com/match-interface

Better to add an actual link like:

The switch driver can be acquired for Intel support or from the
`Match Interface <https://github.com/match-interface>`_ project.

Also should that be to: https://github.com/match-interface/match



> +
> +CRC strip
> +FM10000 family always strip CRC for every packets coming into host
> interface.


Limitations
-----------

Switch manager
~~~~~~~~~~~~~~

The Intel FM10000 family of NICs integrate a hardware switch and multiple host

Etc.

> +Max packet length
> +FM10000 family support maximum of 15K jumbo frame. The value is fixed
> +and can't be changed. So, even (struct
> +rte_eth_conf).rxmode.max_rx_pkt_len is set to a value other than 15364,
> the frames with 15364 byte still can reach to host interface.

This isn't clear (to me). Maybe something like:

The FM10000 family of NICS support a maximum of a 15K jumbo frame. The value
is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
member of ``struct rte_eth_conf`` is set to a value lower than 15364, frames
up to 15364 bytes can still reach the host interface.


Regards,

John.
-- 



More information about the dev mailing list