[dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver

Qiu, Michael michael.qiu at intel.com
Mon Feb 2 10:10:19 CET 2015


On 1/30/2015 1:08 PM, Chen, Jing D wrote:
> From: Jeff Shaw <jeffrey.b.shaw at intel.com>
>
> 1. Add function to scan and initialize fm10k PF device.
> 2. Add implementation to register fm10k pmd PF driver.
> 3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
>    fm10k_stats_get.
>
> Signed-off-by: Jeff Shaw <jeffrey.b.shaw at intel.com>
> Signed-off-by: Chen Jing D(Mark) <jing.d.chen at intel.com>
> ---
>  lib/librte_pmd_fm10k/fm10k_ethdev.c |  339 +++++++++++++++++++++++++++++++++++
>  1 files changed, 339 insertions(+), 0 deletions(-)
>
> diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
> index e69de29..400d841 100644
> --- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
> +++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
> @@ -0,0 +1,339 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2013-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <rte_ethdev.h>
> +#include <rte_malloc.h>
> +#include <rte_memzone.h>
> +#include <rte_string_fns.h>
> +#include <rte_dev.h>
> +#include <rte_spinlock.h>
> +
> +#include "fm10k.h"
> +#include "SHARED/fm10k_api.h"
> +
> +/* Default delay to acquire mailbox lock */
> +#define FM10K_MBXLOCK_DELAY_US 20
> +
> +static void
> +fm10k_mbx_initlock(struct fm10k_hw *hw)
> +{
> +	rte_spinlock_init(FM10K_DEV_PRIVATE_TO_MBXLOCK(hw->back));
> +}
> +
> +static void
> +fm10k_mbx_lock(struct fm10k_hw *hw)
> +{
> +	while (!rte_spinlock_trylock(FM10K_DEV_PRIVATE_TO_MBXLOCK(hw->back)))
> +		rte_delay_us(FM10K_MBXLOCK_DELAY_US);
> +}
> +
> +static void
> +fm10k_mbx_unlock(struct fm10k_hw *hw)
> +{
> +	rte_spinlock_unlock(FM10K_DEV_PRIVATE_TO_MBXLOCK(hw->back));
> +}
> +
> +static int
> +fm10k_dev_configure(struct rte_eth_dev *dev)
> +{
> +	PMD_FUNC_TRACE();
> +
> +	if (dev->data->dev_conf.rxmode.hw_strip_crc == 0)
> +		PMD_LOG(WARNING, "fm10k always strip CRC");
> +
> +	return 0;
> +}
> +
> +static void
> +fm10k_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
> +{
> +	uint64_t ipackets, opackets, ibytes, obytes;
> +	struct fm10k_hw *hw =
> +		FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +	struct fm10k_hw_stats *hw_stats =
> +		FM10K_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
> +	int i;
> +	PMD_FUNC_TRACE();
> +
> +	fm10k_update_hw_stats(hw, hw_stats);
> +
> +	ipackets = opackets = ibytes = obytes = 0;
> +	for (i = 0; (i < RTE_ETHDEV_QUEUE_STAT_CNTRS) &&
> +		(i < FM10K_MAX_QUEUES_PF); ++i) {
> +		stats->q_ipackets[i] = hw_stats->q[i].rx_packets.count;
> +		stats->q_opackets[i] = hw_stats->q[i].tx_packets.count;
> +		stats->q_ibytes[i]   = hw_stats->q[i].rx_bytes.count;
> +		stats->q_obytes[i]   = hw_stats->q[i].tx_bytes.count;
> +		ipackets += stats->q_ipackets[i];
> +		opackets += stats->q_opackets[i];
> +		ibytes   += stats->q_ibytes[i];
> +		obytes   += stats->q_obytes[i];
> +	}
> +	stats->ipackets = ipackets;
> +	stats->opackets = opackets;
> +	stats->ibytes = ibytes;
> +	stats->obytes = obytes;
> +}
> +
> +static void
> +fm10k_stats_reset(struct rte_eth_dev *dev)
> +{
> +	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +	struct fm10k_hw_stats *hw_stats =
> +		FM10K_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
> +	PMD_FUNC_TRACE();
> +
> +	memset(hw_stats, 0, sizeof(*hw_stats));
> +	fm10k_rebind_hw_stats(hw, hw_stats);
> +}
> +
> +/* Mailbox message handler in VF */
> +static const struct fm10k_msg_data fm10k_msgdata_vf[] = {
> +	FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
> +	FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf),
> +	FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
> +	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
> +};
> +
> +/* Mailbox message handler in PF */
> +static const struct fm10k_msg_data fm10k_msgdata_pf[] = {
> +	FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
> +	FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
> +	FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_msg_lport_map_pf),
> +	FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
> +	FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
> +	FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_msg_update_pvid_pf),
> +	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
> +};
> +
> +static int
> +fm10k_setup_mbx_service(struct fm10k_hw *hw)
> +{
> +	int err;
> +
> +	/* Initialize mailbox lock */
> +	fm10k_mbx_initlock(hw);
> +
> +	/* Replace default message handler with new ones */
> +	if (hw->mac.type == fm10k_mac_pf)
> +		err = hw->mbx.ops.register_handlers(&hw->mbx, fm10k_msgdata_pf);
> +	else
> +		err = hw->mbx.ops.register_handlers(&hw->mbx, fm10k_msgdata_vf);
> +
> +	if (err) {
> +		PMD_LOG(ERR, "Failed to register mailbox handler.err:%d", err);
> +		return err;
> +	}
> +	/* Connect to SM for PF device or PF for VF device */
> +	return hw->mbx.ops.connect(hw, &hw->mbx);
> +}
> +
> +static struct eth_dev_ops fm10k_eth_dev_ops = {
> +	.dev_configure           = fm10k_dev_configure,
> +	.stats_get               = fm10k_stats_get,
> +	.stats_reset             = fm10k_stats_reset,
> +};
> +
> +static int
> +eth_fm10k_dev_init(__rte_unused struct eth_driver *eth_drv,
> +	struct rte_eth_dev *dev)
> +{
> +	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +	int diag;
> +	PMD_FUNC_TRACE();
> +
> +	dev->dev_ops = &fm10k_eth_dev_ops;
> +
> +	/* only initialize in the primary process */
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> +		return 0;
> +
> +	/* Vendor and Device ID need to be set before init of shared code */
> +	memset(hw, 0, sizeof(*hw));
> +	hw->device_id = dev->pci_dev->id.device_id;
> +	hw->vendor_id = dev->pci_dev->id.vendor_id;
> +	hw->subsystem_device_id = dev->pci_dev->id.subsystem_device_id;
> +	hw->subsystem_vendor_id = dev->pci_dev->id.subsystem_vendor_id;
> +	hw->revision_id = 0;
> +	hw->hw_addr = (void *)dev->pci_dev->mem_resource[0].addr;
> +	if (hw->hw_addr == NULL) {
> +		PMD_LOG(ERR, "Bad mem resource."
> +			" Try to blacklist unused devices.\n");

Here no need "\n", after that,

Acked-by: Michael Qiu <michael.qiu at intel.com>

Thanks,
Michael
> +		return -EIO;
> +	}
> +
> +	/* Store fm10k_adapter pointer */
> +	hw->back = dev->data->dev_private;
> +
> +	/* Initialize the shared code */
> +	diag = fm10k_init_shared_code(hw);
> +	if (diag != FM10K_SUCCESS) {
> +		PMD_LOG(ERR, "Shared code init failed: %d", diag);
> +		return -EIO;
> +	}
> +
> +	/*
> +	 * Inialize bus info. Normally we would call fm10k_get_bus_info(), but
> +	 * there is no way to get link status without reading BAR4.  Until this
> +	 * works, assume we have maximum bandwidth.
> +	 * @todo - fix bus info
> +	 */
> +	hw->bus_caps.speed = fm10k_bus_speed_8000;
> +	hw->bus_caps.width = fm10k_bus_width_pcie_x8;
> +	hw->bus_caps.payload = fm10k_bus_payload_512;
> +	hw->bus.speed = fm10k_bus_speed_8000;
> +	hw->bus.width = fm10k_bus_width_pcie_x8;
> +	hw->bus.payload = fm10k_bus_payload_256;
> +
> +	/* Initialize the hw */
> +	diag = fm10k_init_hw(hw);
> +	if (diag != FM10K_SUCCESS) {
> +		PMD_LOG(ERR, "Hardware init failed: %d", diag);
> +		return -EIO;
> +	}
> +
> +	/* Initialize MAC address(es) */
> +	dev->data->mac_addrs = rte_zmalloc("fm10k", ETHER_ADDR_LEN, 0);
> +	if (dev->data->mac_addrs == NULL) {
> +		PMD_LOG(ERR, "Cannot allocate memory for MAC addresses");
> +		return -ENOMEM;
> +	}
> +
> +	diag = fm10k_read_mac_addr(hw);
> +	if (diag != FM10K_SUCCESS) {
> +		/*
> +		 * TODO: remove special handling on VF. Need shared code to
> +		 * fix first.
> +		 */
> +		if (hw->mac.type == fm10k_mac_pf) {
> +			PMD_LOG(ERR, "Read MAC addr failed: %d", diag);
> +			return -EIO;
> +		} else {
> +			/* Generate a random addr */
> +			eth_random_addr(hw->mac.addr);
> +			memcpy(hw->mac.perm_addr, hw->mac.addr, ETH_ALEN);
> +		}
> +	}
> +
> +	ether_addr_copy((const struct ether_addr *)hw->mac.addr,
> +			&dev->data->mac_addrs[0]);
> +
> +	/* Reset the hw statistics */
> +	fm10k_stats_reset(dev);
> +
> +	/* Reset the hw */
> +	diag = fm10k_reset_hw(hw);
> +	if (diag != FM10K_SUCCESS) {
> +		PMD_LOG(ERR, "Hardware reset failed: %d", diag);
> +		return -EIO;
> +	}
> +
> +	/* Setup mailbox service */
> +	diag = fm10k_setup_mbx_service(hw);
> +	if (diag != FM10K_SUCCESS) {
> +		PMD_LOG(ERR, "Failed to setup mailbox: %d", diag);
> +		return -EIO;
> +	}
> +
> +	/*
> +	 * Below function will trigger operations on mailbox, acquire lock to
> +	 * avoid race condition from interrupt handler. Operations on mailbox
> +	 * FIFO will trigger interrupt to PF/SM, in which interrupt handler
> +	 * will handle and generate an interrupt to our side. Then,  FIFO in
> +	 * mailbox will be touched.
> +	 */
> +	fm10k_mbx_lock(hw);
> +	/* Enable port first */
> +	hw->mac.ops.update_lport_state(hw, 0, 0, 1);
> +
> +	/* Update default vlan */
> +	hw->mac.ops.update_vlan(hw, hw->mac.default_vid, 0, true);
> +
> +	/*
> +	 * Add default mac/vlan filter. glort is assigned by SM for PF, while is
> +	 * unused for VF. PF will assign correct glort for VF.
> +	 */
> +	hw->mac.ops.update_uc_addr(hw, hw->mac.dglort_map, hw->mac.addr,
> +			      hw->mac.default_vid, 1, 0);
> +
> +	/* Set unicast mode by default. App can change to other mode in other
> +	 * API func.
> +	 */
> +	hw->mac.ops.update_xcast_mode(hw, hw->mac.dglort_map,
> +					FM10K_XCAST_MODE_MULTI);
> +
> +	fm10k_mbx_unlock(hw);
> +
> +	return 0;
> +}
> +
> +/*
> + * The set of PCI devices this driver supports. This driver will enable both PF
> + * and SRIOV-VF devices.
> + */
> +static struct rte_pci_id pci_id_fm10k_map[] = {
> +#define RTE_PCI_DEV_ID_DECL_FM10K(vend, dev) { RTE_PCI_DEVICE(vend, dev) },
> +#include "rte_pci_dev_ids.h"
> +	{ .vendor_id = 0, /* sentinel */ },
> +};
> +
> +static struct eth_driver rte_pmd_fm10k = {
> +	{
> +		.name = "rte_pmd_fm10k",
> +		.id_table = pci_id_fm10k_map,
> +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
> +	},
> +	.eth_dev_init = eth_fm10k_dev_init,
> +	.dev_private_size = sizeof(struct fm10k_adapter),
> +};
> +
> +/*
> + * Driver initialization routine.
> + * Invoked once at EAL init time.
> + * Register itself as the [Poll Mode] Driver of PCI FM10K devices.
> + */
> +static int
> +rte_pmd_fm10k_init(__rte_unused const char *name,
> +	__rte_unused const char *params)
> +{
> +	PMD_FUNC_TRACE();
> +	rte_eth_driver_register(&rte_pmd_fm10k);
> +	return 0;
> +}
> +
> +static struct rte_driver rte_fm10k_driver = {
> +	.type = PMD_PDEV,
> +	.init = rte_pmd_fm10k_init,
> +};
> +
> +PMD_REGISTER_DRIVER(rte_fm10k_driver);



More information about the dev mailing list