[dpdk-dev] [PATCH v6 1/2] librte_pmd_null: Add null PMD
Tetsuya Mukawa
mukawa at igel.co.jp
Mon Feb 9 09:54:04 CET 2015
On 2015/02/06 20:32, Iremonger, Bernard wrote:
> Hi Tetsuya,
>
> My comments are in line below.
>
>> -----Original Message-----
>> From: Tetsuya Mukawa [mailto:mukawa at igel.co.jp]
>> Sent: Friday, February 6, 2015 4:38 AM
>> To: dev at dpdk.org
>> Cc: Iremonger, Bernard; Tetsuya Mukawa
>> Subject: [PATCH v6 1/2] librte_pmd_null: Add null PMD
>>
>> 'null PMD' is a driver of the virtual device particulary designed to measure performance of DPDK
>> PMDs. When an application call rx, null PMD just allocates mbufs and returns those. Also tx, the PMD
>> just frees mbufs.
>>
>> The PMD has following options.
>> - size: specify packe size allocated by RX. Default packet size is 64.
>> - copy: specify 1 or 0 to enable or disable copy while RX and TX.
>> Default value is 0(disbaled).
>> This option is used for emulating more realistic data transfer.
>> Copy size is equal to packet size.
>>
>> To use the PMD, enable CONFIG_RTE_BUILD_SHARED_LIB in config file. Then compile the PMD as
>> shared library. The library can be linked using '-d'
>> option when an application invokes.
>>
>> Here is an example.
>> $ sudo ./testpmd -c f -n 4 -d librte_pmd_null.so \
>> --vdev 'eth_null0' --vdev 'eth_null1' -- -i --no-flush-rx
>>
>> If testpmd is compiled with CONFIG_RTE_BUILD_SHARED_LIB, it may need to specify more libraries
>> using '-d' option.
>>
>> v4:
>> - Fix memory leak.
>> (Thanks to Iremonger, Bernard)
>>
>> Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>
>> ---
>> config/common_bsdapp | 5 +
>> config/common_linuxapp | 5 +
>> lib/Makefile | 1 +
>> lib/librte_pmd_null/Makefile | 58 +++++
>> lib/librte_pmd_null/rte_eth_null.c | 485 +++++++++++++++++++++++++++++++++++++
>> 5 files changed, 554 insertions(+)
>> create mode 100644 lib/librte_pmd_null/Makefile create mode 100644
>> lib/librte_pmd_null/rte_eth_null.c
>>
>> diff --git a/config/common_bsdapp b/config/common_bsdapp index 9177db1..fa849be 100644
>> --- a/config/common_bsdapp
>> +++ b/config/common_bsdapp
>> @@ -224,6 +224,11 @@ CONFIG_RTE_LIBRTE_PMD_PCAP=y CONFIG_RTE_LIBRTE_PMD_BOND=y
>>
>> #
>> +# Compile null PMD
>> +#
>> +CONFIG_RTE_LIBRTE_PMD_NULL=y
>> +
>> +#
>> # Do prefetch of packet data within PMD driver receive function #
>> CONFIG_RTE_PMD_PACKET_PREFETCH=y diff --git a/config/common_linuxapp
>> b/config/common_linuxapp index 27d05be..456fbfe 100644
>> --- a/config/common_linuxapp
>> +++ b/config/common_linuxapp
>> @@ -237,6 +237,11 @@ CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
>> CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
>>
>> #
>> +# Compile null PMD
>> +#
>> +CONFIG_RTE_LIBRTE_PMD_NULL=y
>> +
>> +#
>> # Do prefetch of packet data within PMD driver receive function #
>> CONFIG_RTE_PMD_PACKET_PREFETCH=y diff --git a/lib/Makefile b/lib/Makefile index
>> 0ffc982..d246c53 100644
>> --- a/lib/Makefile
>> +++ b/lib/Makefile
>> @@ -52,6 +52,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += librte_pmd_virtio
>> DIRS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += librte_pmd_vmxnet3
>> DIRS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += librte_pmd_xenvirt
>> DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
>> +DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += librte_pmd_null
>> DIRS-$(CONFIG_RTE_LIBRTE_HASH) += librte_hash
>> DIRS-$(CONFIG_RTE_LIBRTE_LPM) += librte_lpm
>> DIRS-$(CONFIG_RTE_LIBRTE_ACL) += librte_acl diff --git a/lib/librte_pmd_null/Makefile
>> b/lib/librte_pmd_null/Makefile new file mode 100644 index 0000000..0ec4db9
>> --- /dev/null
>> +++ b/lib/librte_pmd_null/Makefile
>> @@ -0,0 +1,58 @@
>> +# BSD LICENSE
>> +#
>> +# Copyright (C) IGEL Co.,Ltd.
>> +# All rights reserved.
>> +#
>> +# Redistribution and use in source and binary forms, with or without
>> +# modification, are permitted provided that the following conditions
>> +# are met:
>> +#
>> +# * Redistributions of source code must retain the above copyright
>> +# notice, this list of conditions and the following disclaimer.
>> +# * Redistributions in binary form must reproduce the above copyright
>> +# notice, this list of conditions and the following disclaimer in
>> +# the documentation and/or other materials provided with the
>> +# distribution.
>> +# * Neither the name of IGEL Co.,Ltd. nor the names of its
>> +# contributors may be used to endorse or promote products derived
>> +# from this software without specific prior written permission.
>> +#
>> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> +
>> +include $(RTE_SDK)/mk/rte.vars.mk
>> +
>> +#
>> +# library name
>> +#
>> +LIB = librte_pmd_null.a
>> +
>> +CFLAGS += -O3
>> +CFLAGS += $(WERROR_FLAGS)
>> +
>> +#
>> +# all source are stored in SRCS-y
>> +#
>> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += rte_eth_null.c
>> +
>> +#
>> +# Export include files
>> +#
>> +SYMLINK-y-include +=
>> +
>> +# this lib depends upon:
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += lib/librte_mbuf
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += lib/librte_ether
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += lib/librte_malloc
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += lib/librte_kvargs
>> +
>> +include $(RTE_SDK)/mk/rte.lib.mk
>> diff --git a/lib/librte_pmd_null/rte_eth_null.c b/lib/librte_pmd_null/rte_eth_null.c
>> new file mode 100644
>> index 0000000..c54e90b
>> --- /dev/null
>> +++ b/lib/librte_pmd_null/rte_eth_null.c
>> @@ -0,0 +1,485 @@
>> +/*-
>> + * BSD LICENSE
>> + *
>> + * Copyright (C) IGEL Co.,Ltd.
>> + * All rights reserved.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following conditions
>> + * are met:
>> + *
>> + * * Redistributions of source code must retain the above copyright
>> + * notice, this list of conditions and the following disclaimer.
>> + * * Redistributions in binary form must reproduce the above copyright
>> + * notice, this list of conditions and the following disclaimer in
>> + * the documentation and/or other materials provided with the
>> + * distribution.
>> + * * Neither the name of IGEL Co.,Ltd. nor the names of its
>> + * contributors may be used to endorse or promote products derived
>> + * from this software without specific prior written permission.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +#include <rte_mbuf.h>
>> +#include <rte_ethdev.h>
>> +#include <rte_malloc.h>
>> +#include <rte_memcpy.h>
>> +#include <rte_dev.h>
>> +#include <rte_kvargs.h>
>> +
>> +#define ETH_NULL_PACKET_SIZE_ARG "size"
>> +#define ETH_NULL_PACKET_COPY_ARG "copy"
>> +
>> +static unsigned default_packet_size = 64; static unsigned
>> +default_packet_copy;
>> +
>> +static const char const *valid_arguments[] = {
>> + ETH_NULL_PACKET_SIZE_ARG,
>> + ETH_NULL_PACKET_COPY_ARG,
>> + NULL
>> +};
>> +
>> +struct pmd_internals;
>> +
>> +struct null_queue {
>> + struct pmd_internals *internals;
>> +
>> + struct rte_mempool *mb_pool;
>> + struct rte_mbuf *dummy_packet;
>> +
>> + rte_atomic64_t rx_pkts;
>> + rte_atomic64_t tx_pkts;
>> + rte_atomic64_t err_pkts;
>> +};
>> +
>> +struct pmd_internals {
>> + unsigned packet_size;
>> + unsigned packet_copy;
>> + unsigned numa_node;
>> +
>> + unsigned nb_rx_queues;
>> + unsigned nb_tx_queues;
>> +
>> + struct null_queue rx_null_queues[1];
>> + struct null_queue tx_null_queues[1];
>> +};
>> +
>> +
>> +static struct ether_addr eth_addr = { .addr_bytes = {0} }; static const
>> +char *drivername = "Null PMD"; static struct rte_eth_link pmd_link = {
>> + .link_speed = 10000,
>> + .link_duplex = ETH_LINK_FULL_DUPLEX,
>> + .link_status = 0
>> +};
>> +
>> +static uint16_t
>> +eth_null_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs) {
>> + int i;
>> + struct null_queue *h = q;
>> + unsigned packet_size = h->internals->packet_size;
>> +
>> + for (i = 0; i < nb_bufs; i++) {
>> + bufs[i] = rte_pktmbuf_alloc(h->mb_pool);
>> + if (!bufs[i])
>> + break;
> Should the code return an error here rather than break?
Hi Bernard,
I appreciate for your comments.
I guess it's not an error.
The function should return the number of packets actually allocated.
>
>> + bufs[i]->data_len = (uint16_t)packet_size;
>> + bufs[i]->pkt_len = packet_size;
>> + bufs[i]->nb_segs = 1;
>> + bufs[i]->next = NULL;
>> + }
>> +
>> + rte_atomic64_add(&(h->rx_pkts), i);
>> +
>> + return i;
>> +}
>> +
>> +static uint16_t
>> +eth_null_copy_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs) {
>> + int i;
>> + struct null_queue *h = q;
>> + unsigned packet_size = h->internals->packet_size;
>> +
>> + for (i = 0; i < nb_bufs; i++) {
>> + bufs[i] = rte_pktmbuf_alloc(h->mb_pool);
>> + if (!bufs[i])
>> + break;
> Should the code return an error here rather than break?
Also, the function should return the number of packets actually sent.
>> + rte_memcpy(rte_pktmbuf_mtod(bufs[i], void *), h->dummy_packet,
>> + packet_size);
>> + bufs[i]->data_len = (uint16_t)packet_size;
>> + bufs[i]->pkt_len = packet_size;
>> + bufs[i]->nb_segs = 1;
>> + bufs[i]->next = NULL;
>> + }
>> +
>> + rte_atomic64_add(&(h->rx_pkts), i);
>> +
>> + return i;
>> +}
>> +
>> +static uint16_t
>> +eth_null_tx(void *q, struct rte_mbuf **bufs __rte_unused, uint16_t
>> +nb_bufs) {
>> + int i;
>> + struct null_queue *h = q;
> Input parameters q and bufs should be checked.
Thanks, I will fix these suggestions.
Regards,
Tetsuya
>> +
>> + for (i = 0; i < nb_bufs; i++)
>> + rte_pktmbuf_free(bufs[i]);
>> +
>> + rte_atomic64_add(&(h->tx_pkts), i);
>> +
>> + return i;
>> +}
>> +
>> +static uint16_t
>> +eth_null_copy_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs) {
>> + int i;
>> + struct null_queue *h = q;
>> + unsigned packet_size = h->internals->packet_size;
> Input parameters q and bufs should be checked.
>
>> +
>> + for (i = 0; i < nb_bufs; i++) {
>> + rte_memcpy(h->dummy_packet, rte_pktmbuf_mtod(bufs[i], void *),
>> + packet_size);
>> + rte_pktmbuf_free(bufs[i]);
>> + }
>> +
>> + rte_atomic64_add(&(h->tx_pkts), i);
>> +
>> + return i;
>> +}
>> +
>> +static int
>> +eth_dev_configure(struct rte_eth_dev *dev __rte_unused) { return 0; }
>> +
>> +static int
>> +eth_dev_start(struct rte_eth_dev *dev)
>> +{
> Input parameter dev should be checked.
>
>> + dev->data->dev_link.link_status = 1;
>> + return 0;
>> +}
>> +
>> +static void
>> +eth_dev_stop(struct rte_eth_dev *dev)
>> +{
> Input parameter dev should be checked.
>
>> + dev->data->dev_link.link_status = 0;
>> +}
>> +
>> +static int
>> +eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
>> + uint16_t nb_rx_desc __rte_unused,
>> + unsigned int socket_id __rte_unused,
>> + const struct rte_eth_rxconf *rx_conf __rte_unused,
>> + struct rte_mempool *mb_pool __rte_unused) {
>> + struct rte_mbuf *dummy_packet;
>> + struct pmd_internals *internals = dev->data->dev_private;
>> + unsigned packet_size = internals->packet_size;
>> +
> Input parameter dev should be checked.
>
>> + if (rx_queue_id != 0)
>> + return -ENODEV;
>> +
>> + internals->rx_null_queues[rx_queue_id].mb_pool = mb_pool;
>> + dev->data->rx_queues[rx_queue_id] =
>> + &internals->rx_null_queues[rx_queue_id];
>> + dummy_packet = rte_zmalloc_socket(NULL,
>> + packet_size, 0, internals->numa_node);
>> + if (dummy_packet == NULL)
>> + return -ENOMEM;
>> +
>> + internals->rx_null_queues[rx_queue_id].internals = internals;
>> + internals->rx_null_queues[rx_queue_id].dummy_packet = dummy_packet;
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +eth_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
>> + uint16_t nb_tx_desc __rte_unused,
>> + unsigned int socket_id __rte_unused,
>> + const struct rte_eth_txconf *tx_conf __rte_unused) {
>> + struct rte_mbuf *dummy_packet;
>> + struct pmd_internals *internals = dev->data->dev_private;
>> + unsigned packet_size = internals->packet_size;
>> +
> Input parameter dev should be checked.
>
>> + if (tx_queue_id != 0)
>> + return -ENODEV;
>> +
>> + dev->data->tx_queues[tx_queue_id] =
>> + &internals->tx_null_queues[tx_queue_id];
>> + dummy_packet = rte_zmalloc_socket(NULL,
>> + packet_size, 0, internals->numa_node);
>> + if (dummy_packet == NULL)
>> + return -ENOMEM;
>> +
>> + internals->tx_null_queues[tx_queue_id].internals = internals;
>> + internals->tx_null_queues[tx_queue_id].dummy_packet = dummy_packet;
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static void
>> +eth_dev_info(struct rte_eth_dev *dev,
>> + struct rte_eth_dev_info *dev_info)
>> +{
>> + struct pmd_internals *internals = dev->data->dev_private;
> Input parameters dev and dev_info should be checked.
>
>> +
>> + dev_info->driver_name = drivername;
>> + dev_info->max_mac_addrs = 1;
>> + dev_info->max_rx_pktlen = (uint32_t)-1;
>> + dev_info->max_rx_queues = (uint16_t)internals->nb_rx_queues;
>> + dev_info->max_tx_queues = (uint16_t)internals->nb_tx_queues;
>> + dev_info->min_rx_bufsize = 0;
>> + dev_info->pci_dev = NULL;
>> +}
>> +
>> +static void
>> +eth_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *igb_stats)
>> +{
>> + unsigned i;
>> + unsigned long rx_total = 0, tx_total = 0, tx_err_total = 0;
>> + const struct pmd_internals *internal = dev->data->dev_private;
> Input parameters dev and igb_stats should be checked.
>
>> +
>> + memset(igb_stats, 0, sizeof(*igb_stats));
>> + for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS &&
>> + i < internal->nb_rx_queues; i++) {
>> + igb_stats->q_ipackets[i] =
>> + internal->rx_null_queues[i].rx_pkts.cnt;
>> + rx_total += igb_stats->q_ipackets[i];
>> + }
>> +
>> + for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS &&
>> + i < internal->nb_tx_queues; i++) {
>> + igb_stats->q_opackets[i] =
>> + internal->tx_null_queues[i].tx_pkts.cnt;
>> + igb_stats->q_errors[i] =
>> + internal->tx_null_queues[i].err_pkts.cnt;
>> + tx_total += igb_stats->q_opackets[i];
>> + tx_err_total += igb_stats->q_errors[i];
>> + }
>> +
>> + igb_stats->ipackets = rx_total;
>> + igb_stats->opackets = tx_total;
>> + igb_stats->oerrors = tx_err_total;
>> +}
>> +
>> +static void
>> +eth_stats_reset(struct rte_eth_dev *dev) {
>> + unsigned i;
>> + struct pmd_internals *internal = dev->data->dev_private;
> Input parameter dev should be checked.
>
>> +
>> + for (i = 0; i < internal->nb_rx_queues; i++)
>> + internal->rx_null_queues[i].rx_pkts.cnt = 0;
>> + for (i = 0; i < internal->nb_tx_queues; i++) {
>> + internal->tx_null_queues[i].tx_pkts.cnt = 0;
>> + internal->tx_null_queues[i].err_pkts.cnt = 0;
>> + }
>> +}
>> +
>> +static void
>> +eth_queue_release(void *q)
>> +{
>> + struct null_queue *nq;
>> +
>> + if (q == NULL)
>> + return;
>> +
>> + nq = q;
>> + if (nq->dummy_packet)
>> + rte_free(nq->dummy_packet);
>> +}
>> +
>> +static int
>> +eth_link_update(struct rte_eth_dev *dev __rte_unused,
>> + int wait_to_complete __rte_unused) { return 0; }
>> +
>> +static struct eth_dev_ops ops = {
>> + .dev_start = eth_dev_start,
>> + .dev_stop = eth_dev_stop,
>> + .dev_configure = eth_dev_configure,
>> + .dev_infos_get = eth_dev_info,
>> + .rx_queue_setup = eth_rx_queue_setup,
>> + .tx_queue_setup = eth_tx_queue_setup,
>> + .rx_queue_release = eth_queue_release,
>> + .tx_queue_release = eth_queue_release,
>> + .link_update = eth_link_update,
>> + .stats_get = eth_stats_get,
>> + .stats_reset = eth_stats_reset,
>> +};
>> +
>> +static int
>> +eth_dev_null_create(const char *name __rte_unused,
>> + const unsigned numa_node,
>> + unsigned packet_size,
>> + unsigned packet_copy)
>> +{
>> + const unsigned nb_rx_queues = 1;
>> + const unsigned nb_tx_queues = 1;
>> + struct rte_eth_dev_data *data = NULL;
>> + struct rte_pci_device *pci_dev = NULL;
>> + struct pmd_internals *internals = NULL;
>> + struct rte_eth_dev *eth_dev = NULL;
>> +
>> + RTE_LOG(INFO, PMD, "Creating null ethdev on numa socket %u\n",
>> + numa_node);
>> +
>> + /* now do all data allocation - for eth_dev structure, dummy pci driver
>> + * and internal (private) data
>> + */
>> + data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node);
>> + if (data == NULL)
>> + goto error;
>> +
>> + pci_dev = rte_zmalloc_socket(name, sizeof(*pci_dev), 0, numa_node);
>> + if (pci_dev == NULL)
>> + goto error;
>> +
>> + internals = rte_zmalloc_socket(name, sizeof(*internals), 0, numa_node);
>> + if (internals == NULL)
>> + goto error;
>> +
>> + /* reserve an ethdev entry */
>> + eth_dev = rte_eth_dev_allocate(name, RTE_ETH_DEV_VIRTUAL);
>> + if (eth_dev == NULL)
>> + goto error;
>> +
>> + /* now put it all together
>> + * - store queue data in internals,
>> + * - store numa_node info in pci_driver
>> + * - point eth_dev_data to internals and pci_driver
>> + * - and point eth_dev structure to new eth_dev_data structure
>> + */
>> + /* NOTE: we'll replace the data element, of originally allocated eth_dev
>> + * so the nulls are local per-process */
>> +
>> + internals->nb_rx_queues = nb_rx_queues;
>> + internals->nb_tx_queues = nb_tx_queues;
>> + internals->packet_size = packet_size;
>> + internals->packet_copy = packet_copy;
>> + internals->numa_node = numa_node;
>> +
>> + pci_dev->numa_node = numa_node;
>> +
>> + data->dev_private = internals;
>> + data->port_id = eth_dev->data->port_id;
>> + data->nb_rx_queues = (uint16_t)nb_rx_queues;
>> + data->nb_tx_queues = (uint16_t)nb_tx_queues;
>> + data->dev_link = pmd_link;
>> + data->mac_addrs = ð_addr;
>> +
>> + eth_dev->data = data;
>> + eth_dev->dev_ops = &ops;
>> + eth_dev->pci_dev = pci_dev;
>> +
>> + /* finally assign rx and tx ops */
>> + if (packet_copy) {
>> + eth_dev->rx_pkt_burst = eth_null_copy_rx;
>> + eth_dev->tx_pkt_burst = eth_null_copy_tx;
>> + } else {
>> + eth_dev->rx_pkt_burst = eth_null_rx;
>> + eth_dev->tx_pkt_burst = eth_null_tx;
>> + }
>> +
>> + return 0;
>> +
>> +error:
>> + if (data)
>> + rte_free(data);
>> + if (pci_dev)
>> + rte_free(pci_dev);
>> + if (internals)
>> + rte_free(internals);
>> + return -1;
>> +}
>> +
>> +static inline int
>> +get_packet_size_arg(const char *key __rte_unused,
>> + const char *value, void *extra_args)
>> +{
>> + const char *a = value;
>> + unsigned *packet_size = extra_args;
> Parameters value and extra_args should be checked.
>
>> +
>> + *packet_size = (unsigned)strtoul(a, NULL, 0);
>> + if (*packet_size == UINT_MAX)
>> + return -1;
>> +
>> + return 0;
>> +}
>> +
>> +static inline int
>> +get_packet_copy_arg(const char *key __rte_unused,
>> + const char *value, void *extra_args)
>> +{
>> + const char *a = value;
>> + unsigned *packet_copy = extra_args;
> Parameters value and extra_args should be checked.
>
>> +
>> + *packet_copy = (unsigned)strtoul(a, NULL, 0);
>> + if (*packet_copy == UINT_MAX)
>> + return -1;
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +rte_pmd_null_devinit(const char *name, const char *params) {
>> + unsigned numa_node;
>> + unsigned packet_size = default_packet_size;
>> + unsigned packet_copy = default_packet_copy;
>> + struct rte_kvargs *kvlist;
>> + int ret;
>> +
> Input parameters name and params should be checked.
>
>> + RTE_LOG(INFO, PMD, "Initializing pmd_null for %s\n", name);
>> +
>> + numa_node = rte_socket_id();
>> +
>> + kvlist = rte_kvargs_parse(params, valid_arguments);
>> + if (kvlist == NULL)
>> + return -1;
>> +
>> + if (rte_kvargs_count(kvlist, ETH_NULL_PACKET_SIZE_ARG) == 1) {
>> +
>> + ret = rte_kvargs_process(kvlist, ETH_NULL_PACKET_SIZE_ARG,
>> + &get_packet_size_arg, &packet_size);
>> + if (ret < 0)
>> + return -1;
>> + }
>> +
>> + if (rte_kvargs_count(kvlist, ETH_NULL_PACKET_COPY_ARG) == 1) {
>> +
>> + ret = rte_kvargs_process(kvlist, ETH_NULL_PACKET_COPY_ARG,
>> + &get_packet_copy_arg, &packet_copy);
>> + if (ret < 0)
>> + return -1;
>> + }
>> +
>> + RTE_LOG(INFO, PMD, "Configure pmd_null: packet size is %d, "
>> + "packet copy is %s\n", packet_size,
>> + packet_copy ? "enabled" : "disabled");
>> +
>> + return eth_dev_null_create(name, numa_node, packet_size, packet_copy);
>> +}
>> +
>> +static struct rte_driver pmd_null_drv = {
>> + .name = "eth_null",
>> + .type = PMD_VDEV,
>> + .init = rte_pmd_null_devinit,
>> +};
>> +
>> +PMD_REGISTER_DRIVER(pmd_null_drv);
>> --
>> 1.9.1
> Regards,
>
> Bernard.
>
More information about the dev
mailing list