[dpdk-dev] [PATCH v4 5/7] pmd ixgbe: enable DCB in SRIOV

Ouyang, Changchun changchun.ouyang at intel.com
Wed Feb 25 04:36:47 CET 2015



> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Pawel Wodkowski
> Sent: Thursday, February 19, 2015 11:55 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH v4 5/7] pmd ixgbe: enable DCB in SRIOV
> 
> Enable DCB in SRIOV mode for ixgbe driver.
> 
> To use DCB in VF PF must configure port as  DCB + VMDQ and VF must
> configure port as DCB only. VF are not allowed to change DCB settings that
> are common to all ports like number of TC.
> 
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski at intel.com>
> ---
>  lib/librte_pmd_ixgbe/ixgbe_ethdev.c |  2 +-
>  lib/librte_pmd_ixgbe/ixgbe_pf.c     | 19 ++++++++++++-------
>  lib/librte_pmd_ixgbe/ixgbe_rxtx.c   | 18 +++++++++++-------
>  3 files changed, 24 insertions(+), 15 deletions(-)
> 
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> index 8e9da3b..7551bcc 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> @@ -1514,7 +1514,7 @@ ixgbe_dev_configure(struct rte_eth_dev *dev)
>  		if (conf->nb_queue_pools != ETH_16_POOLS &&
>  			   conf->nb_queue_pools != ETH_32_POOLS) {
>  			PMD_INIT_LOG(ERR, " VMDQ+DCB selected, "
> -					"number of TX qqueue pools must
> be %d or %d\n",
> +					"number of TX queue pools must
> be %d or %d\n",
>  					ETH_16_POOLS, ETH_32_POOLS);
>  			return (-EINVAL);
>  		}
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c
> b/lib/librte_pmd_ixgbe/ixgbe_pf.c index a7b9333..7c4afba 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
> @@ -109,9 +109,12 @@ int ixgbe_pf_host_init(struct rte_eth_dev *eth_dev)
>  	/* Fill sriov structure using default configuration. */
>  	retval = ixgbe_pf_configure_mq_sriov(eth_dev);
>  	if (retval != 0) {
> -		if (retval < 0)
> -			PMD_INIT_LOG(ERR, " Setting up SRIOV with default
> device "
> +		if (retval < 0) {
> +			PMD_INIT_LOG(ERR, "Setting up SRIOV with default
> device "
>  					"configuration should not fail. This is a
> BUG.");
> +			return retval;
> +		}
> +
>  		return 0;
>  	}
> 
> @@ -652,7 +655,9 @@ ixgbe_get_vf_queues(struct rte_eth_dev *dev,
> uint32_t vf, uint32_t *msgbuf)  {
>  	struct ixgbe_vf_info *vfinfo =
>  		*IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
> >dev_private);
> -	uint32_t default_q = vf *
> RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
> +	struct ixgbe_dcb_config *dcbinfo =
> +		IXGBE_DEV_PRIVATE_TO_DCB_CFG(dev->data-
> >dev_private);
> +	uint32_t default_q = RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx;

Why need change the default_q here?

> 
>  	/* Verify if the PF supports the mbox APIs version or not */
>  	switch (vfinfo[vf].api_version) {
> @@ -670,10 +675,10 @@ ixgbe_get_vf_queues(struct rte_eth_dev *dev,
> uint32_t vf, uint32_t *msgbuf)
>  	/* Notify VF of default queue */
>  	msgbuf[IXGBE_VF_DEF_QUEUE] = default_q;
> 
> -	/*
> -	 * FIX ME if it needs fill msgbuf[IXGBE_VF_TRANS_VLAN]
> -	 * for VLAN strip or VMDQ_DCB or VMDQ_DCB_RSS
> -	 */
> +	if (dcbinfo->num_tcs.pg_tcs)
> +		msgbuf[IXGBE_VF_TRANS_VLAN] = dcbinfo-
> >num_tcs.pg_tcs;
> +	else
> +		msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
> 
>  	return 0;
>  }
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index e6766b3..2e3522c 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -3166,10 +3166,9 @@ void ixgbe_configure_dcb(struct rte_eth_dev
> *dev)
> 
>  	/* check support mq_mode for DCB */
>  	if ((dev_conf->rxmode.mq_mode != ETH_MQ_RX_VMDQ_DCB) &&
> -	    (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB))
> -		return;
> -
> -	if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
> +	    (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB) &&
> +	    (dev_conf->txmode.mq_mode != ETH_MQ_TX_VMDQ_DCB) &&
> +	    (dev_conf->txmode.mq_mode != ETH_MQ_TX_DCB))
>  		return;
> 
>  	/** Configure DCB hardware **/
> @@ -3442,8 +3441,13 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev
> *dev)
>  			ixgbe_config_vf_rss(dev);
>  			break;
> 
> -		/* FIXME if support DCB/RSS together with VMDq & SRIOV */
> +		/*
> +		 * DCB will be configured during port startup.
> +		 */
>  		case ETH_MQ_RX_VMDQ_DCB:
> +			break;
> +
> +		/* FIXME if support DCB+RSS together with VMDq & SRIOV
> */
>  		case ETH_MQ_RX_VMDQ_DCB_RSS:
>  			PMD_INIT_LOG(ERR,
>  				"Could not support DCB with VMDq &
> SRIOV"); @@ -3488,8 +3492,8 @@ ixgbe_dev_mq_tx_configure(struct
> rte_eth_dev *dev)
>  		switch (RTE_ETH_DEV_SRIOV(dev).active) {
> 
>  		/*
> -		 * SRIOV active scheme
> -		 * FIXME if support DCB together with VMDq & SRIOV
> +		 * SRIOV active scheme.
> +		 * Note: DCB will be configured during port startup.
>  		 */
>  		case ETH_64_POOLS:
>  			mtqc = IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF;
> --
> 1.9.1



More information about the dev mailing list