[dpdk-dev] [PATCH v14 08/13] ethdev: Add functions that will be used by port hotplug functions
Tetsuya Mukawa
mukawa at igel.co.jp
Wed Feb 25 05:04:46 CET 2015
The patch adds following functions.
- rte_eth_dev_save()
The function is used for saving current rte_eth_dev structures.
- rte_eth_dev_get_changed_port()
The function receives the rte_eth_dev structures, then compare
these with current values to know which port is actually
attached or detached.
- rte_eth_dev_get_addr_by_port()
The function returns a pci address of an ethdev specified by port
identifier.
- rte_eth_dev_get_port_by_addr()
The function returns a port identifier of an ethdev specified by
pci address.
- rte_eth_dev_get_name_by_port()
The function returns a unique identifier name of an ethdev
specified by port identifier.
- Add rte_eth_dev_is_detachable()
The function returns whether a PMD supports detach function.
Also, the patch changes scope of rte_eth_dev_allocated() to global.
This function will be called by virtual PMDs to support port hotplug.
So change scope of the function to global.
v10:
- Change order of version.map.
(Thanks to Thomas Monjalon)
v9:
- rte_eth_dev_check_detachable() is replaced by
rte_eth_dev_is_detachable().
- strncpy() is replaced by strcpy().
(Thanks to Thomas Monjalon)
- Add missing symbol in version map.
(Thanks to Nail Horman)
v8:
- Add size parameter to rte_eth_dev_save().
- Add missing symbol in version map.
(Thanks to Qiu, Michael and Iremonger, Bernard)
v7:
- Add pt_driver checking to rte_eth_dev_check_detachable().
(Thanks to Qiu, Michael)
v5:
- Fix return value of below functions.
rte_eth_dev_get_changed_port().
rte_eth_dev_get_port_by_addr().
v4:
- Add parameter checking.
v3:
- Fix if-condition bug while comparing pci addresses.
- Add error checking codes.
Reported-by: Mark Enright <menrigh at brocade.com>
Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>
---
lib/librte_ether/rte_ethdev.c | 103 ++++++++++++++++++++++++++++++++-
lib/librte_ether/rte_ethdev.h | 83 ++++++++++++++++++++++++++
lib/librte_ether/rte_ether_version.map | 7 +++
3 files changed, 192 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 165ec74..1f6a066 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -201,7 +201,7 @@ rte_eth_dev_data_alloc(void)
RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data));
}
-static struct rte_eth_dev *
+struct rte_eth_dev *
rte_eth_dev_allocated(const char *name)
{
unsigned i;
@@ -426,6 +426,107 @@ rte_eth_dev_count(void)
return (nb_ports);
}
+int
+rte_eth_dev_save(struct rte_eth_dev *devs, size_t size)
+{
+ if ((devs == NULL) ||
+ (size != sizeof(struct rte_eth_dev) * RTE_MAX_ETHPORTS))
+ return -EINVAL;
+
+ /* save current rte_eth_devices */
+ memcpy(devs, rte_eth_devices, size);
+ return 0;
+}
+
+int
+rte_eth_dev_get_changed_port(struct rte_eth_dev *devs, uint8_t *port_id)
+{
+ if ((devs == NULL) || (port_id == NULL))
+ return -EINVAL;
+
+ /* check which port was attached or detached */
+ for (*port_id = 0; *port_id < RTE_MAX_ETHPORTS; (*port_id)++, devs++) {
+ if (rte_eth_devices[*port_id].attached ^ devs->attached)
+ return 0;
+ }
+ return -ENODEV;
+}
+
+int
+rte_eth_dev_get_addr_by_port(uint8_t port_id, struct rte_pci_addr *addr)
+{
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -EINVAL;
+ }
+
+ if (addr == NULL) {
+ PMD_DEBUG_TRACE("Null pointer is specified\n");
+ return -EINVAL;
+ }
+
+ *addr = rte_eth_devices[port_id].pci_dev->addr;
+ return 0;
+}
+
+int
+rte_eth_dev_get_port_by_addr(struct rte_pci_addr *addr, uint8_t *port_id)
+{
+ struct rte_pci_addr *tmp;
+
+ if ((addr == NULL) || (port_id == NULL)) {
+ PMD_DEBUG_TRACE("Null pointer is specified\n");
+ return -EINVAL;
+ }
+
+ for (*port_id = 0; *port_id < RTE_MAX_ETHPORTS; (*port_id)++) {
+ if (!rte_eth_devices[*port_id].attached)
+ continue;
+ if (!rte_eth_devices[*port_id].pci_dev)
+ continue;
+ tmp = &rte_eth_devices[*port_id].pci_dev->addr;
+ if (rte_eal_compare_pci_addr(tmp, addr) == 0)
+ return 0;
+ }
+ return -ENODEV;
+}
+
+int
+rte_eth_dev_get_name_by_port(uint8_t port_id, char *name)
+{
+ char *tmp;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -EINVAL;
+ }
+
+ if (name == NULL) {
+ PMD_DEBUG_TRACE("Null pointer is specified\n");
+ return -EINVAL;
+ }
+
+ /* shouldn't check 'rte_eth_devices[i].data',
+ * because it might be overwritten by VDEV PMD */
+ tmp = rte_eth_dev_data[port_id].name;
+ strcpy(name, tmp);
+ return 0;
+}
+
+int
+rte_eth_dev_is_detachable(uint8_t port_id)
+{
+ uint32_t drv_flags;
+
+ if (port_id >= RTE_MAX_ETHPORTS) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -EINVAL;
+ }
+
+ drv_flags = rte_eth_devices[port_id].driver->pci_drv.drv_flags;
+ return !(drv_flags & RTE_PCI_DRV_DETACHABLE);
+}
+
static int
rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
{
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 37c3765..5519ce0 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1528,6 +1528,89 @@ extern struct rte_eth_dev rte_eth_devices[];
extern uint8_t rte_eth_dev_count(void);
/**
+ * Function for internal use by port hotplug functions.
+ * Copies current ethdev structures to the specified pointer.
+ *
+ * @param devs The pointer to the ethdev structures
+ * @param size The size of ethdev structures
+ * @return
+ * - 0 on success, negative on error
+ */
+extern int rte_eth_dev_save(struct rte_eth_dev *devs, size_t size);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Compare the specified ethdev structures with currents. Then
+ * if there is a port which status is changed, fill the specified pointer
+ * with the port id of that port.
+ * @param devs The pointer to the ethdev structures
+ * @param port_id The pointer to the port id
+ * @return
+ * - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_changed_port(
+ struct rte_eth_dev *devs, uint8_t *port_id);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a pci address of a ethdev specified by port identifier.
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param addr
+ * The pointer to the pci address
+ * @return
+ * - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_addr_by_port(
+ uint8_t port_id, struct rte_pci_addr *addr);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a port identifier of a ethdev specified by pci address.
+ * @param addr
+ * The pointer to the pci address of the Ethernet device.
+ * @param port_id
+ * The pointer to the port identifier
+ * @return
+ * - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_port_by_addr(
+ struct rte_pci_addr *addr, uint8_t *port_id);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a unique identifier name of a ethdev specified by port identifier.
+ * @param port_id
+ * The port identifier.
+ * @param name
+ * The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ * - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Check whether or not, a PMD that is handling the ethdev specified by port
+ * identifier can support detach function.
+ * @param port_id
+ * The port identifier
+ * @return
+ * - 0 on supporting detach function, negative on not supporting
+ */
+extern int rte_eth_dev_is_detachable(uint8_t port_id);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a ethdev slot specified by the unique identifier name.
+ * @param name
+ * The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ * - The pointer to the ethdev slot, on success. NULL on error
+ */
+extern struct rte_eth_dev *rte_eth_dev_allocated(const char *name);
+
+/**
* Function for internal use by dummy drivers primarily, e.g. ring-based
* driver.
* Allocates a new ethdev slot for an ethernet device and returns the pointer
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 94fd685..7db7085 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -8,6 +8,7 @@ DPDK_2.0 {
rte_eth_allmulticast_enable;
rte_eth_allmulticast_get;
rte_eth_dev_allocate;
+ rte_eth_dev_allocated;
rte_eth_dev_bypass_event_show;
rte_eth_dev_bypass_event_store;
rte_eth_dev_bypass_init;
@@ -34,9 +35,14 @@ DPDK_2.0 {
rte_eth_dev_filter_supported;
rte_eth_dev_flow_ctrl_get;
rte_eth_dev_flow_ctrl_set;
+ rte_eth_dev_get_addr_by_port;
+ rte_eth_dev_get_changed_port;
rte_eth_dev_get_mtu;
+ rte_eth_dev_get_name_by_port;
+ rte_eth_dev_get_port_by_addr;
rte_eth_dev_get_vlan_offload;
rte_eth_dev_info_get;
+ rte_eth_dev_is_detachable;
rte_eth_dev_mac_addr_add;
rte_eth_dev_mac_addr_remove;
rte_eth_dev_priority_flow_ctrl_set;
@@ -46,6 +52,7 @@ DPDK_2.0 {
rte_eth_dev_rss_reta_update;
rte_eth_dev_rx_queue_start;
rte_eth_dev_rx_queue_stop;
+ rte_eth_dev_save;
rte_eth_dev_set_link_down;
rte_eth_dev_set_link_up;
rte_eth_dev_set_mtu;
--
1.9.1
More information about the dev
mailing list