[dpdk-dev] [PATCH v2] app/test: add crc32 algorithms equivalence check

Bruce Richardson bruce.richardson at intel.com
Wed Feb 25 12:34:31 CET 2015


On Wed, Feb 25, 2015 at 10:08:32AM +0600, Yerden Zhumabekov wrote:
> New function test_crc32_hash_alg_equiv() checks whether software,
> 4-byte operand and 8-byte operand versions of CRC32 hash function
> implementations return the same result value.
> 
> Signed-off-by: Yerden Zhumabekov <e_zhumabekov at sts.kz>

Two small notes below for improving output on error.

Acked-by: Bruce Richardson <bruce.richardson at intel.com>

> ---
>  app/test/test_hash.c |   63 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/app/test/test_hash.c b/app/test/test_hash.c
> index 76b1b8f..3e94af1 100644
> --- a/app/test/test_hash.c
> +++ b/app/test/test_hash.c
> @@ -177,6 +177,66 @@ static struct rte_hash_parameters ut_params = {
>  	.socket_id = 0,
>  };
>  
> +#define CRC32_ITERATIONS (1U << 20)
> +#define CRC32_DWORDS (1U << 6)
> +/*
> + * Test if all CRC32 implementations yield the same hash value
> + */
> +static int
> +test_crc32_hash_alg_equiv(void)
> +{
> +	uint32_t hash_val;
> +	uint32_t init_val;
> +	uint64_t data64[CRC32_DWORDS];
> +	unsigned i, j;
> +	size_t data_len;
> +
> +	printf("# CRC32 implementations equivalence test\n");
> +	for (i = 0; i < CRC32_ITERATIONS; i++) {
> +		/* Randomizing data_len of data set */
> +		data_len = (size_t) ((rte_rand() % sizeof(data64)) + 1);
> +		init_val = (uint32_t) rte_rand();
> +
> +		/* Fill the data set */
> +		for (j = 0; j < CRC32_DWORDS; j++)
> +			data64[j] = rte_rand();
> +
> +		/* Calculate software CRC32 */
> +		rte_hash_crc_set_alg(CRC32_SW);
> +		hash_val = rte_hash_crc(data64, data_len, init_val);
> +
> +		/* Check against 4-byte-operand sse4.2 CRC32 if available */
> +		rte_hash_crc_set_alg(CRC32_SSE42);
> +		if (hash_val != rte_hash_crc(data64, data_len, init_val)) {
> +			printf("Failed checking CRC32_SW against CRC32_SSE42\n");
> +			break;
> +		}
> +
> +		/* Check against 8-byte-operand sse4.2 CRC32 if available */
> +		rte_hash_crc_set_alg(CRC32_SSE42_x64);
> +		if (hash_val != rte_hash_crc(data64, data_len, init_val)) {
> +			printf("Failed checking CRC32_SW against CRC32_SSE42_x64\n");
> +			break;
> +		}
> +	}
> +
> +	/* Resetting to best available algorithm */
> +	rte_hash_crc_set_alg(CRC32_SSE42_x64);
> +
> +	if (i == CRC32_ITERATIONS)
> +		return 0;
> +
> +	printf("Failed test data (hex):\n");
> +
> +	for (j = 0; j < data_len; j++) {
> +		printf("%02X", ((uint8_t *)data64)[j]);
Put in a space after each hex character, otherwise it comes out like:

Failed test data (hex):
AAD292776348010C7A18D3080DB3A300
FD
Test Failed

[I forced a failure by changing a != to == to test it, don't worry, the
hash calculations are fine! :-)]

> +		if ((j+1) % 16 == 0 || j == data_len - 1)
> +			printf("\n");
> +	}
Maybe also print out here, or before the hex digits, the length of the data
that was tested. e.g. "printf("%u bytes total\n", data_len);" or similar.
> +
> +	return -1;
> +}
> +
>  /*
>   * Test a hash function.
>   */
> @@ -1356,6 +1416,9 @@ test_hash(void)
>  
>  	run_hash_func_tests();
>  
> +	if (test_crc32_hash_alg_equiv() < 0)
> +		return -1;
> +
>  	return 0;
>  }
>  
> -- 
> 1.7.9.5
> 


More information about the dev mailing list