[dpdk-dev] [PATCH v3 1/6] ixgbe: convert debug messages to DEBUG level

[Stephen Hemminger]

From: Stephen Hemminger <shemming at brocade.com>

All the debug chatter messages in the system log causes
complaints from users. Change the INFO messages to DEBUG
for normal startup kind of stuff.

Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 14 +++++++-------
 drivers/net/ixgbe/ixgbe_rxtx.c   | 22 +++++++++++-----------
 2 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index b7a60b1..0ff9583 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -576,7 +576,7 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
 		(hw->mac.type != ixgbe_mac_X550EM_x))
 		return -ENOSYS;
 
-	PMD_INIT_LOG(INFO, "Setting port %d, %s queue_id %d to stat index %d",
+	PMD_INIT_LOG(DEBUG, "Setting port %d, %s queue_id %d to stat index %d",
 		     (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
 		     queue_id, stat_idx);
 
@@ -602,20 +602,20 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
 	else
 		stat_mappings->rqsmr[n] |= qsmr_mask;
 
-	PMD_INIT_LOG(INFO, "Set port %d, %s queue_id %d to stat index %d",
+	PMD_INIT_LOG(DEBUG, "Set port %d, %s queue_id %d to stat index %d",
 		     (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
 		     queue_id, stat_idx);
-	PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
+	PMD_INIT_LOG(DEBUG, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
 		     is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
 
 	/* Now write the mapping in the appropriate register */
 	if (is_rx) {
-		PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d",
+		PMD_INIT_LOG(DEBUG, "Write 0x%x to RX IXGBE stat mapping reg:%d",
 			     stat_mappings->rqsmr[n], n);
 		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(n), stat_mappings->rqsmr[n]);
 	}
 	else {
-		PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d",
+		PMD_INIT_LOG(DEBUG, "Write 0x%x to TX IXGBE stat mapping reg:%d",
 			     stat_mappings->tqsm[n], n);
 		IXGBE_WRITE_REG(hw, IXGBE_TQSM(n), stat_mappings->tqsm[n]);
 	}
@@ -2297,7 +2297,7 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
 
 	/* read-on-clear nic registers here */
 	eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
-	PMD_DRV_LOG(INFO, "eicr %x", eicr);
+	PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
 
 	intr->flags = 0;
 	if (eicr & IXGBE_EICR_LSC) {
@@ -2338,7 +2338,7 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
 		PMD_INIT_LOG(INFO, " Port %d: Link Down",
 				(int)(dev->data->port_id));
 	}
-	PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
+	PMD_INIT_LOG(DEBUG, "PCI Address: %04d:%02d:%02d:%d",
 				dev->pci_dev->addr.domain,
 				dev->pci_dev->addr.bus,
 				dev->pci_dev->addr.devid,
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index b1db57f..ecd2184 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -1,4 +1,4 @@
-/*-
+ /*-
  *   BSD LICENSE
  *
  *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
@@ -1874,23 +1874,23 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq)
 	/* Use a simple Tx queue (no offloads, no multi segs) if possible */
 	if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
 			&& (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
-		PMD_INIT_LOG(INFO, "Using simple tx code path");
+		PMD_INIT_LOG(DEBUG, "Using simple tx code path");
 #ifdef RTE_IXGBE_INC_VECTOR
 		if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
 				(rte_eal_process_type() != RTE_PROC_PRIMARY ||
 					ixgbe_txq_vec_setup(txq) == 0)) {
-			PMD_INIT_LOG(INFO, "Vector tx enabled.");
+			PMD_INIT_LOG(DEBUG, "Vector tx enabled.");
 			dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
 		} else
 #endif
 		dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
 	} else {
-		PMD_INIT_LOG(INFO, "Using full-featured tx code path");
-		PMD_INIT_LOG(INFO,
+		PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
+		PMD_INIT_LOG(DEBUG,
 				" - txq_flags = %lx " "[IXGBE_SIMPLE_FLAGS=%lx]",
 				(unsigned long)txq->txq_flags,
 				(unsigned long)IXGBE_SIMPLE_FLAGS);
-		PMD_INIT_LOG(INFO,
+		PMD_INIT_LOG(DEBUG,
 				" - tx_rs_thresh = %lu " "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
 				(unsigned long)txq->tx_rs_thresh,
 				(unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST);
@@ -3766,11 +3766,11 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev)
 	 */
 	if (dev->data->lro) {
 		if (adapter->rx_bulk_alloc_allowed) {
-			PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk "
+			PMD_INIT_LOG(DEBUG, "LRO is requested. Using a bulk "
 					   "allocation version");
 			dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
 		} else {
-			PMD_INIT_LOG(INFO, "LRO is requested. Using a single "
+			PMD_INIT_LOG(DEBUG, "LRO is requested. Using a single "
 					   "allocation version");
 			dev->rx_pkt_burst = ixgbe_recv_pkts_lro_single_alloc;
 		}
@@ -3786,7 +3786,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev)
 
 			dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
 		} else if (adapter->rx_bulk_alloc_allowed) {
-			PMD_INIT_LOG(INFO, "Using a Scattered with bulk "
+			PMD_INIT_LOG(DEBUG, "Using a Scattered with bulk "
 					   "allocation callback (port=%d).",
 				     dev->data->port_id);
 			dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
@@ -3808,7 +3808,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev)
 	 *    - Single buffer allocation (the simplest one)
 	 */
 	} else if (adapter->rx_vec_allowed) {
-		PMD_INIT_LOG(INFO, "Vector rx enabled, please make sure RX "
+		PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX "
 				   "burst size no less than 32.");
 
 		dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
@@ -3966,7 +3966,7 @@ ixgbe_set_rsc(struct rte_eth_dev *dev)
 
 	dev->data->lro = 1;
 
-	PMD_INIT_LOG(INFO, "enabling LRO mode");
+	PMD_INIT_LOG(DEBUG, "enabling LRO mode");
 
 	return 0;
 }
-- 
2.1.4