[dpdk-dev] [PATCH 20/26] ixgbe/base: ixgbe_setup_internal_phy_x550em function clean-up
Wenzhuo Lu
wenzhuo.lu at intel.com
Fri Jun 5 07:21:52 CEST 2015
This patch cleans up the ixgbe_setup_internal_phy_ x550em() function as follows:
- Renames it to ixgbe_setup_internal_phy_t_x550em to clarify that it is
specific to copper
- Returns an error if called for non-copper devices
- Corrects the comments
- Removed the LASI(Link Alarm Status Interrupt) status register checks as
this was incorrect and never worked correctly anyway.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 31 ++++++++++++-------------------
drivers/net/ixgbe/base/ixgbe_x550.h | 2 +-
2 files changed, 13 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index 87942bb..669d0ce 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -1150,7 +1150,8 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
break;
case ixgbe_phy_x550em_ext_t:
- phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em;
+ phy->ops.setup_internal_link =
+ ixgbe_setup_internal_phy_t_x550em;
phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
break;
default:
@@ -1537,35 +1538,27 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
}
/**
- * ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY
+ * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
* @hw: point to hardware structure
*
- * Configures the integrated KR PHY to talk to the external PHY. The base
- * driver will call this function when it gets notification via interrupt from
- * the external PHY. This function forces the internal PHY into iXFI mode at
- * the correct speed.
+ * Configures the link between the integrated KR PHY and the external X557 PHY
+ * The driver will call this function when it gets a link status change
+ * interrupt from the X557 PHY. This function configures the link speed
+ * between the PHYs to match the link speed of the BASE-T link.
*
* A return of a non-zero value indicates an error, and the base driver should
* not report link up.
*/
-s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
{
u32 status;
- u16 lasi, autoneg_status, speed;
+ u16 autoneg_status, speed;
ixgbe_link_speed force_speed;
- /* Verify that the external link status has changed */
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &lasi);
- if (status != IXGBE_SUCCESS)
- return status;
-
- /* If there was no change in link status, we can just exit */
- if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM))
- return IXGBE_SUCCESS;
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+ return IXGBE_ERR_CONFIG;
- /* we read this twice back to back to indicate current status */
+ /* read this twice back to back to indicate current status */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
&autoneg_status);
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
index a60c7ce..bd6ce9d 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.h
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -83,7 +83,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw);
s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
-s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);
--
1.9.3
More information about the dev
mailing list