[dpdk-dev] [PATCH 23/26] ixgbe/base: add link check support for x550em PHY

Wenzhuo Lu wenzhuo.lu at intel.com
Fri Jun 5 07:21:55 CEST 2015


This patch adds ixgbe_check_link_t_X550em for checking x550em
PHY link. We check that both the MAC and external x550em PHY have link.
This is to avoid a false link up between the internal and external PHY
when the external PHY doesn't have link.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
 drivers/net/ixgbe/base/ixgbe_x550.c | 50 +++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbe/base/ixgbe_x550.h |  2 ++
 2 files changed, 52 insertions(+)

diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index 3695215..4608f75 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -1070,6 +1070,7 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
 		break;
 	case ixgbe_media_type_copper:
 		mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
+		mac->ops.check_link = ixgbe_check_link_t_X550em;
 		break;
 	default:
 		break;
@@ -2840,3 +2841,52 @@ s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
 
 	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
 }
+
+/**
+ * ixgbe_check_link_t_X550em - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Check that both the MAC and X557 external PHY have link.
+ **/
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			      bool *link_up, bool link_up_wait_to_complete)
+{
+	u32 status;
+	u16 autoneg_status;
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+		return IXGBE_ERR_CONFIG;
+
+	status = ixgbe_check_mac_link_generic(hw, speed, link_up,
+					      link_up_wait_to_complete);
+
+	/* If check link fails or MAC link is not up, then return */
+	if (status != IXGBE_SUCCESS || !(*link_up))
+		return status;
+
+	/* MAC link is up, so check external PHY link.
+	 * Read this twice back to back to indicate current status.
+	 */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+
+	if (status != IXGBE_SUCCESS)
+		return status;
+
+	/* If external PHY link is not up, then indicate link not up */
+	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+		*link_up = false;
+
+	return IXGBE_SUCCESS;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
index ee23c76..ead9e79 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.h
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -99,5 +99,7 @@ s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw);
 s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
 				  ixgbe_link_speed speed,
 				  bool autoneg_wait_to_complete);
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			      bool *link_up, bool link_up_wait_to_complete);
 #endif /* _IXGBE_X550_H_ */
 
-- 
1.9.3



More information about the dev mailing list