[dpdk-dev] [PATCH v6 3/9] app/test: update malloc/memzone unit tests

Sergio Gonzalez Monroy sergio.gonzalez.monroy at intel.com
Fri Jun 26 17:29:32 CEST 2015


Some unit test are not relevant anymore. It is the case of those malloc
UTs that checked corner cases when allocating MALLOC_MEMZONE_SIZE
chunks, and the case of those memzone UTs relaying of specific free
memsegs of rhte reserved memzone.

Other UTs just need to be update, for example, to calculate maximum free
block size available.

Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy at intel.com>
---
 app/test/test_malloc.c  |  86 ----------
 app/test/test_memzone.c | 440 ++++--------------------------------------------
 2 files changed, 35 insertions(+), 491 deletions(-)

diff --git a/app/test/test_malloc.c b/app/test/test_malloc.c
index ea6f651..a04a751 100644
--- a/app/test/test_malloc.c
+++ b/app/test/test_malloc.c
@@ -56,10 +56,6 @@
 
 #define N 10000
 
-#define QUOTE_(x) #x
-#define QUOTE(x) QUOTE_(x)
-#define MALLOC_MEMZONE_SIZE QUOTE(RTE_MALLOC_MEMZONE_SIZE)
-
 /*
  * Malloc
  * ======
@@ -292,60 +288,6 @@ test_str_to_size(void)
 }
 
 static int
-test_big_alloc(void)
-{
-	int socket = 0;
-	struct rte_malloc_socket_stats pre_stats, post_stats;
-	size_t size =rte_str_to_size(MALLOC_MEMZONE_SIZE)*2;
-	int align = 0;
-#ifndef RTE_LIBRTE_MALLOC_DEBUG
-	int overhead = RTE_CACHE_LINE_SIZE + RTE_CACHE_LINE_SIZE;
-#else
-	int overhead = RTE_CACHE_LINE_SIZE + RTE_CACHE_LINE_SIZE + RTE_CACHE_LINE_SIZE;
-#endif
-
-	rte_malloc_get_socket_stats(socket, &pre_stats);
-
-	void *p1 = rte_malloc_socket("BIG", size , align, socket);
-	if (!p1)
-		return -1;
-	rte_malloc_get_socket_stats(socket,&post_stats);
-
-	/* Check statistics reported are correct */
-	/* Allocation may increase, or may be the same as before big allocation */
-	if (post_stats.heap_totalsz_bytes < pre_stats.heap_totalsz_bytes) {
-		printf("Malloc statistics are incorrect - heap_totalsz_bytes\n");
-		return -1;
-	}
-	/* Check that allocated size adds up correctly */
-	if (post_stats.heap_allocsz_bytes !=
-			pre_stats.heap_allocsz_bytes + size + align + overhead) {
-		printf("Malloc statistics are incorrect - alloc_size\n");
-		return -1;
-	}
-	/* Check free size against tested allocated size */
-	if (post_stats.heap_freesz_bytes !=
-			post_stats.heap_totalsz_bytes - post_stats.heap_allocsz_bytes) {
-		printf("Malloc statistics are incorrect - heap_freesz_bytes\n");
-		return -1;
-	}
-	/* Number of allocated blocks must increase after allocation */
-	if (post_stats.alloc_count != pre_stats.alloc_count + 1) {
-		printf("Malloc statistics are incorrect - alloc_count\n");
-		return -1;
-	}
-	/* New blocks now available - just allocated 1 but also 1 new free */
-	if (post_stats.free_count != pre_stats.free_count &&
-			post_stats.free_count != pre_stats.free_count - 1) {
-		printf("Malloc statistics are incorrect - free_count\n");
-		return -1;
-	}
-
-	rte_free(p1);
-	return 0;
-}
-
-static int
 test_multi_alloc_statistics(void)
 {
 	int socket = 0;
@@ -399,10 +341,6 @@ test_multi_alloc_statistics(void)
 	/* After freeing both allocations check stats return to original */
 	rte_malloc_get_socket_stats(socket, &post_stats);
 
-	/*
-	 * Check that no new blocks added after small allocations
-	 * i.e. < RTE_MALLOC_MEMZONE_SIZE
-	 */
 	if(second_stats.heap_totalsz_bytes != first_stats.heap_totalsz_bytes) {
 		printf("Incorrect heap statistics: Total size \n");
 		return -1;
@@ -447,18 +385,6 @@ test_multi_alloc_statistics(void)
 }
 
 static int
-test_memzone_size_alloc(void)
-{
-	void *p1 = rte_malloc("BIG", (size_t)(rte_str_to_size(MALLOC_MEMZONE_SIZE) - 128), 64);
-	if (!p1)
-		return -1;
-	rte_free(p1);
-	/* one extra check - check no crashes if free(NULL) */
-	rte_free(NULL);
-	return 0;
-}
-
-static int
 test_rte_malloc_type_limits(void)
 {
 	/* The type-limits functionality is not yet implemented,
@@ -935,18 +861,6 @@ test_malloc(void)
 	}
 	else printf("test_str_to_size() passed\n");
 
-	if (test_memzone_size_alloc() < 0){
-		printf("test_memzone_size_alloc() failed\n");
-		return -1;
-	}
-	else printf("test_memzone_size_alloc() passed\n");
-
-	if (test_big_alloc() < 0){
-		printf("test_big_alloc() failed\n");
-		return -1;
-	}
-	else printf("test_big_alloc() passed\n");
-
 	if (test_zero_aligned_alloc() < 0){
 		printf("test_zero_aligned_alloc() failed\n");
 		return -1;
diff --git a/app/test/test_memzone.c b/app/test/test_memzone.c
index 9c7a1cb..6934eee 100644
--- a/app/test/test_memzone.c
+++ b/app/test/test_memzone.c
@@ -44,6 +44,9 @@
 #include <rte_eal_memconfig.h>
 #include <rte_common.h>
 #include <rte_string_fns.h>
+#include <rte_errno.h>
+#include <rte_malloc.h>
+#include "../../lib/librte_eal/common/malloc_elem.h"
 
 #include "test.h"
 
@@ -378,65 +381,37 @@ test_memzone_reserve_flags(void)
 	return 0;
 }
 
-static int
-test_memzone_reserve_max(void)
+
+/* Find the heap with the greatest free block size */
+static size_t
+find_max_block_free_size(const unsigned _align)
 {
-	const struct rte_memzone *mz;
-	const struct rte_config *config;
-	const struct rte_memseg *ms;
-	int memseg_idx = 0;
-	int memzone_idx = 0;
+	struct rte_malloc_socket_stats stats;
+	unsigned i, align = _align;
 	size_t len = 0;
-	void* last_addr;
-	size_t maxlen = 0;
 
-	/* get pointer to global configuration */
-	config = rte_eal_get_configuration();
+	for (i = 0; i < RTE_MAX_NUMA_NODES; i++) {
+		rte_malloc_get_socket_stats(i, &stats);
+		if (stats.greatest_free_size > len)
+			len = stats.greatest_free_size;
+	}
 
-	ms = rte_eal_get_physmem_layout();
+	if (align < RTE_CACHE_LINE_SIZE)
+		align = RTE_CACHE_LINE_ROUNDUP(align+1);
 
-	for (memseg_idx = 0; memseg_idx < RTE_MAX_MEMSEG; memseg_idx++){
-		/* ignore smaller memsegs as they can only get smaller */
-		if (ms[memseg_idx].len < maxlen)
-			continue;
-
-		/* align everything */
-		last_addr = RTE_PTR_ALIGN_CEIL(ms[memseg_idx].addr, RTE_CACHE_LINE_SIZE);
-		len = ms[memseg_idx].len - RTE_PTR_DIFF(last_addr, ms[memseg_idx].addr);
-		len &= ~((size_t) RTE_CACHE_LINE_MASK);
-
-		/* cycle through all memzones */
-		for (memzone_idx = 0; memzone_idx < RTE_MAX_MEMZONE; memzone_idx++) {
-
-			/* stop when reaching last allocated memzone */
-			if (config->mem_config->memzone[memzone_idx].addr == NULL)
-				break;
-
-			/* check if the memzone is in our memseg and subtract length */
-			if ((config->mem_config->memzone[memzone_idx].addr >=
-			     ms[memseg_idx].addr) &&
-			    (config->mem_config->memzone[memzone_idx].addr <
-			     (RTE_PTR_ADD(ms[memseg_idx].addr, ms[memseg_idx].len)))) {
-				/* since the zones can now be aligned and occasionally skip
-				 * some space, we should calculate the length based on
-				 * reported length and start addresses difference. Addresses
-				 * are allocated sequentially so we don't need to worry about
-				 * them being in the right order.
-				 */
-				len -= RTE_PTR_DIFF(
-						    config->mem_config->memzone[memzone_idx].addr,
-						    last_addr);
-				len -= config->mem_config->memzone[memzone_idx].len;
-				last_addr = RTE_PTR_ADD(config->mem_config->memzone[memzone_idx].addr,
-							(size_t) config->mem_config->memzone[memzone_idx].len);
-			}
-		}
+	if (len <= MALLOC_ELEM_OVERHEAD + align)
+		return 0;
 
-		/* we don't need to calculate offset here since length
-		 * is always cache-aligned */
-		if (len > maxlen)
-			maxlen = len;
-	}
+	return len - MALLOC_ELEM_OVERHEAD - align;
+}
+
+static int
+test_memzone_reserve_max(void)
+{
+	const struct rte_memzone *mz;
+	size_t maxlen;
+
+	maxlen = find_max_block_free_size(0);
 
 	if (maxlen == 0) {
 		printf("There is no space left!\n");
@@ -445,7 +420,8 @@ test_memzone_reserve_max(void)
 
 	mz = rte_memzone_reserve("max_zone", 0, SOCKET_ID_ANY, 0);
 	if (mz == NULL){
-		printf("Failed to reserve a big chunk of memory\n");
+		printf("Failed to reserve a big chunk of memory - %s\n",
+				rte_strerror(rte_errno));
 		rte_dump_physmem_layout(stdout);
 		rte_memzone_dump(stdout);
 		return -1;
@@ -453,8 +429,7 @@ test_memzone_reserve_max(void)
 
 	if (mz->len != maxlen) {
 		printf("Memzone reserve with 0 size did not return bigest block\n");
-		printf("Expected size = %zu, actual size = %zu\n",
-		       maxlen, mz->len);
+		printf("Expected size = %zu, actual size = %zu\n", maxlen, mz->len);
 		rte_dump_physmem_layout(stdout);
 		rte_memzone_dump(stdout);
 
@@ -467,81 +442,24 @@ static int
 test_memzone_reserve_max_aligned(void)
 {
 	const struct rte_memzone *mz;
-	const struct rte_config *config;
-	const struct rte_memseg *ms;
-	int memseg_idx = 0;
-	int memzone_idx = 0;
-	uintptr_t addr_offset;
-	size_t len = 0;
-	void* last_addr;
 	size_t maxlen = 0;
 
 	/* random alignment */
 	rte_srand((unsigned)rte_rdtsc());
 	const unsigned align = 1 << ((rte_rand() % 8) + 5); /* from 128 up to 4k alignment */
 
-	/* get pointer to global configuration */
-	config = rte_eal_get_configuration();
-
-	ms = rte_eal_get_physmem_layout();
-
-	addr_offset = 0;
-
-	for (memseg_idx = 0; memseg_idx < RTE_MAX_MEMSEG; memseg_idx++){
-
-		/* ignore smaller memsegs as they can only get smaller */
-		if (ms[memseg_idx].len < maxlen)
-			continue;
-
-		/* align everything */
-		last_addr = RTE_PTR_ALIGN_CEIL(ms[memseg_idx].addr, RTE_CACHE_LINE_SIZE);
-		len = ms[memseg_idx].len - RTE_PTR_DIFF(last_addr, ms[memseg_idx].addr);
-		len &= ~((size_t) RTE_CACHE_LINE_MASK);
-
-		/* cycle through all memzones */
-		for (memzone_idx = 0; memzone_idx < RTE_MAX_MEMZONE; memzone_idx++) {
-
-			/* stop when reaching last allocated memzone */
-			if (config->mem_config->memzone[memzone_idx].addr == NULL)
-				break;
-
-			/* check if the memzone is in our memseg and subtract length */
-			if ((config->mem_config->memzone[memzone_idx].addr >=
-					ms[memseg_idx].addr) &&
-					(config->mem_config->memzone[memzone_idx].addr <
-					(RTE_PTR_ADD(ms[memseg_idx].addr, ms[memseg_idx].len)))) {
-				/* since the zones can now be aligned and occasionally skip
-				 * some space, we should calculate the length based on
-				 * reported length and start addresses difference.
-				 */
-				len -= (uintptr_t) RTE_PTR_SUB(
-						config->mem_config->memzone[memzone_idx].addr,
-						(uintptr_t) last_addr);
-				len -= config->mem_config->memzone[memzone_idx].len;
-				last_addr =
-						RTE_PTR_ADD(config->mem_config->memzone[memzone_idx].addr,
-						(size_t) config->mem_config->memzone[memzone_idx].len);
-			}
-		}
-
-		/* make sure we get the alignment offset */
-		if (len > maxlen) {
-			addr_offset = RTE_PTR_ALIGN_CEIL((uintptr_t) last_addr, align) - (uintptr_t) last_addr;
-			maxlen = len;
-		}
-	}
+	maxlen = find_max_block_free_size(align);
 
-	if (maxlen == 0 || maxlen == addr_offset) {
+	if (maxlen == 0) {
 		printf("There is no space left for biggest %u-aligned memzone!\n", align);
 		return 0;
 	}
 
-	maxlen -= addr_offset;
-
 	mz = rte_memzone_reserve_aligned("max_zone_aligned", 0,
 			SOCKET_ID_ANY, 0, align);
 	if (mz == NULL){
-		printf("Failed to reserve a big chunk of memory\n");
+		printf("Failed to reserve a big chunk of memory - %s\n",
+				rte_strerror(rte_errno));
 		rte_dump_physmem_layout(stdout);
 		rte_memzone_dump(stdout);
 		return -1;
@@ -762,282 +680,6 @@ test_memzone_bounded(void)
 	if ((rc = check_memzone_bounded("bounded_1K_MAX", 0, 64, 1024)) != 0)
 		return (rc);
 
-	return (0);
-}
-
-static int
-test_memzone_reserve_memory_in_smallest_segment(void)
-{
-	const struct rte_memzone *mz;
-	const struct rte_memseg *ms, *min_ms, *prev_min_ms;
-	size_t min_len, prev_min_len;
-	const struct rte_config *config;
-	int i;
-
-	config = rte_eal_get_configuration();
-
-	min_ms = NULL;  /*< smallest segment */
-	prev_min_ms = NULL; /*< second smallest segment */
-
-	/* find two smallest segments */
-	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
-		ms = &config->mem_config->free_memseg[i];
-
-		if (ms->addr == NULL)
-			break;
-		if (ms->len == 0)
-			continue;
-
-		if (min_ms == NULL)
-			min_ms = ms;
-		else if (min_ms->len > ms->len) {
-			/* set last smallest to second last */
-			prev_min_ms = min_ms;
-
-			/* set new smallest */
-			min_ms = ms;
-		} else if ((prev_min_ms == NULL)
-			|| (prev_min_ms->len > ms->len))
-			prev_min_ms = ms;
-	}
-
-	if (min_ms == NULL || prev_min_ms == NULL) {
-		printf("Smallest segments not found!\n");
-		return -1;
-	}
-
-	min_len = min_ms->len;
-	prev_min_len = prev_min_ms->len;
-
-	/* try reserving a memzone in the smallest memseg */
-	mz = rte_memzone_reserve("smallest_mz", RTE_CACHE_LINE_SIZE,
-			SOCKET_ID_ANY, 0);
-	if (mz == NULL) {
-		printf("Failed to reserve memory from smallest memseg!\n");
-		return -1;
-	}
-	if (prev_min_ms->len != prev_min_len &&
-			min_ms->len != min_len - RTE_CACHE_LINE_SIZE) {
-		printf("Reserved memory from wrong memseg!\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-/* this test is a bit  tricky, and thus warrants explanation.
- *
- * first, we find two smallest memsegs to conduct our experiments on.
- *
- * then, we bring them within alignment from each other: if second segment is
- * twice+ as big as the first, reserve memory from that segment; if second
- * segment is comparable in length to the first, then cut the first segment
- * down until it becomes less than half of second segment, and then cut down
- * the second segment to be within alignment of the first.
- *
- * then, we have to pass the following test: if segments are within alignment
- * of each other (that is, the difference is less than 256 bytes, which is what
- * our alignment will be), segment with smallest offset should be picked.
- *
- * we know that min_ms will be our smallest segment, so we need to make sure
- * that we adjust the alignments so that the bigger segment has smallest
- * alignment (in our case, smallest segment will have 64-byte alignment, while
- * bigger segment will have 128-byte alignment).
- */
-static int
-test_memzone_reserve_memory_with_smallest_offset(void)
-{
-	const struct rte_memseg *ms, *min_ms, *prev_min_ms;
-	size_t len, min_len, prev_min_len;
-	const struct rte_config *config;
-	int i, align;
-
-	config = rte_eal_get_configuration();
-
-	min_ms = NULL;  /*< smallest segment */
-	prev_min_ms = NULL; /*< second smallest segment */
-	align = RTE_CACHE_LINE_SIZE * 4;
-
-	/* find two smallest segments */
-	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
-		ms = &config->mem_config->free_memseg[i];
-
-		if (ms->addr == NULL)
-			break;
-		if (ms->len == 0)
-			continue;
-
-		if (min_ms == NULL)
-			min_ms = ms;
-		else if (min_ms->len > ms->len) {
-			/* set last smallest to second last */
-			prev_min_ms = min_ms;
-
-			/* set new smallest */
-			min_ms = ms;
-		} else if ((prev_min_ms == NULL)
-			|| (prev_min_ms->len > ms->len)) {
-			prev_min_ms = ms;
-		}
-	}
-
-	if (min_ms == NULL || prev_min_ms == NULL) {
-		printf("Smallest segments not found!\n");
-		return -1;
-	}
-
-	prev_min_len = prev_min_ms->len;
-	min_len = min_ms->len;
-
-	/* if smallest segment is bigger than half of bigger segment */
-	if (prev_min_ms->len - min_ms->len <= min_ms->len) {
-
-		len = (min_ms->len * 2) - prev_min_ms->len;
-
-		/* make sure final length is *not* aligned */
-		while (((min_ms->addr_64 + len) & (align-1)) == 0)
-			len += RTE_CACHE_LINE_SIZE;
-
-		if (rte_memzone_reserve("dummy_mz1", len, SOCKET_ID_ANY, 0) == NULL) {
-			printf("Cannot reserve memory!\n");
-			return -1;
-		}
-
-		/* check if we got memory from correct segment */
-		if (min_ms->len != min_len - len) {
-			printf("Reserved memory from wrong segment!\n");
-			return -1;
-		}
-	}
-    /* if we don't need to touch smallest segment but it's aligned */
-    else if ((min_ms->addr_64 & (align-1)) == 0) {
-            if (rte_memzone_reserve("align_mz1", RTE_CACHE_LINE_SIZE,
-                    SOCKET_ID_ANY, 0) == NULL) {
-                            printf("Cannot reserve memory!\n");
-                            return -1;
-            }
-            if (min_ms->len != min_len - RTE_CACHE_LINE_SIZE) {
-                    printf("Reserved memory from wrong segment!\n");
-                    return -1;
-            }
-    }
-
-	/* if smallest segment is less than half of bigger segment */
-	if (prev_min_ms->len - min_ms->len > min_ms->len) {
-		len = prev_min_ms->len - min_ms->len - align;
-
-		/* make sure final length is aligned */
-		while (((prev_min_ms->addr_64 + len) & (align-1)) != 0)
-			len += RTE_CACHE_LINE_SIZE;
-
-		if (rte_memzone_reserve("dummy_mz2", len, SOCKET_ID_ANY, 0) == NULL) {
-			printf("Cannot reserve memory!\n");
-			return -1;
-		}
-
-		/* check if we got memory from correct segment */
-		if (prev_min_ms->len != prev_min_len - len) {
-			printf("Reserved memory from wrong segment!\n");
-			return -1;
-		}
-	}
-	len = RTE_CACHE_LINE_SIZE;
-
-
-
-	prev_min_len = prev_min_ms->len;
-	min_len = min_ms->len;
-
-	if (min_len >= prev_min_len || prev_min_len - min_len > (unsigned) align) {
-		printf("Segments are of wrong lengths!\n");
-		return -1;
-	}
-
-	/* try reserving from a bigger segment */
-	if (rte_memzone_reserve_aligned("smallest_offset", len, SOCKET_ID_ANY, 0, align) ==
-			NULL) {
-		printf("Cannot reserve memory!\n");
-		return -1;
-	}
-
-	/* check if we got memory from correct segment */
-	if (min_ms->len != min_len && prev_min_ms->len != (prev_min_len - len)) {
-		printf("Reserved memory from segment with smaller offset!\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int
-test_memzone_reserve_remainder(void)
-{
-	const struct rte_memzone *mz1, *mz2;
-	const struct rte_memseg *ms, *min_ms = NULL;
-	size_t min_len;
-	const struct rte_config *config;
-	int i, align;
-
-	min_len = 0;
-	align = RTE_CACHE_LINE_SIZE;
-
-	config = rte_eal_get_configuration();
-
-	/* find minimum free contiguous length */
-	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
-		ms = &config->mem_config->free_memseg[i];
-
-		if (ms->addr == NULL)
-			break;
-		if (ms->len == 0)
-			continue;
-
-		if (min_len == 0 || ms->len < min_len) {
-			min_len = ms->len;
-			min_ms = ms;
-
-			/* find maximum alignment this segment is able to hold */
-			align = RTE_CACHE_LINE_SIZE;
-			while ((ms->addr_64 & (align-1)) == 0) {
-				align <<= 1;
-			}
-		}
-	}
-
-	if (min_ms == NULL) {
-		printf("Minimal sized segment not found!\n");
-		return -1;
-	}
-
-	/* try reserving min_len bytes with alignment - this should not affect our
-	 * memseg, the memory will be taken from a different one.
-	 */
-	mz1 = rte_memzone_reserve_aligned("reserve_remainder_1", min_len,
-			SOCKET_ID_ANY, 0, align);
-	if (mz1 == NULL) {
-		printf("Failed to reserve %zu bytes aligned on %i bytes\n", min_len,
-				align);
-		return -1;
-	}
-	if (min_ms->len != min_len) {
-		printf("Memseg memory should not have been reserved!\n");
-		return -1;
-	}
-
-	/* try reserving min_len bytes with less alignment - this should fill up
-	 * the segment.
-	 */
-	mz2 = rte_memzone_reserve("reserve_remainder_2", min_len,
-			SOCKET_ID_ANY, 0);
-	if (mz2 == NULL) {
-		printf("Failed to reserve %zu bytes\n", min_len);
-		return -1;
-	}
-	if (min_ms->len != 0) {
-		printf("Memseg memory should have been reserved!\n");
-		return -1;
-	}
-
 	return 0;
 }
 
@@ -1125,14 +767,6 @@ test_memzone(void)
 	if (test_memzone_reserving_zone_size_bigger_than_the_maximum() < 0)
 		return -1;
 
-	printf("test reserving memory in smallest segments\n");
-	if (test_memzone_reserve_memory_in_smallest_segment() < 0)
-		return -1;
-
-	printf("test reserving memory in segments with smallest offsets\n");
-	if (test_memzone_reserve_memory_with_smallest_offset() < 0)
-		return -1;
-
 	printf("test memzone_reserve flags\n");
 	if (test_memzone_reserve_flags() < 0)
 		return -1;
@@ -1149,10 +783,6 @@ test_memzone(void)
 	if (test_memzone_invalid_alignment() < 0)
 		return -1;
 
-	printf("test reserving amounts of memory equal to segment's length\n");
-	if (test_memzone_reserve_remainder() < 0)
-		return -1;
-
 	printf("test reserving the largest size memzone possible\n");
 	if (test_memzone_reserve_max() < 0)
 		return -1;
-- 
1.9.3



More information about the dev mailing list