[dpdk-dev] [PATCH] enicpmd: build changes for FreeBSD
Sujith Sankar (ssujith)
ssujith at cisco.com
Thu May 7 05:43:39 CEST 2015
On 06/05/15 9:19 pm, "Bruce Richardson" <bruce.richardson at intel.com> wrote:
>On Wed, May 06, 2015 at 02:41:00PM +0530, Sujith Sankar wrote:
>> This patch adds the changes required to build enic for FreeBSD
>>
>
>Hi,
>
>I see no issues with this patch, but I suggest the description for it
>should
>be changed. There is no actual build problem or error with the enic (at
>least
>not that I can see), it builds fine with gcc and clang currently. This
>patch
>instead adds support for the enic to the nic_uio driver so the enic can be
>"used", not just "built" on FreeBSD. Correct?
Bruce, I fully agree with you.
I shall change the description and re-submit the patch.
Thanks !
-Sujith
>
>Other than that description reworking:
>
>Acked-by: Bruce Richardson <bruce.richardson at intel.com>
>
>> Signed-off-by: Sujith Sankar <ssujith at cisco.com>
>> ---
>> lib/librte_eal/bsdapp/nic_uio/nic_uio.c | 1 +
>> lib/librte_eal/common/include/rte_pci_dev_ids.h | 17 +++++++++++++++++
>> 2 files changed, 18 insertions(+)
>>
>> diff --git a/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
>>b/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
>> index 5ae8560..e649e32 100644
>> --- a/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
>> +++ b/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
>> @@ -113,6 +113,7 @@ struct pci_bdf {
>> #define RTE_PCI_DEV_ID_DECL_I40EVF(vend, dev) {vend, dev},
>> #define RTE_PCI_DEV_ID_DECL_VIRTIO(vend, dev) {vend, dev},
>> #define RTE_PCI_DEV_ID_DECL_VMXNET3(vend, dev) {vend, dev},
>> +#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev) {vend, dev},
>>
>> const struct device devices[] = {
>> #include <rte_pci_dev_ids.h>
>> diff --git a/lib/librte_eal/common/include/rte_pci_dev_ids.h
>>b/lib/librte_eal/common/include/rte_pci_dev_ids.h
>> index 21d2eed..5d1b285 100644
>> --- a/lib/librte_eal/common/include/rte_pci_dev_ids.h
>> +++ b/lib/librte_eal/common/include/rte_pci_dev_ids.h
>> @@ -140,6 +140,10 @@
>> #define RTE_PCI_DEV_ID_DECL_FM10KVF(vend, dev)
>> #endif
>>
>> +#ifndef RTE_PCI_DEV_ID_DECL_ENIC
>> +#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev)
>> +#endif
>> +
>> #ifndef PCI_VENDOR_ID_INTEL
>> /** Vendor ID used by Intel devices */
>> #define PCI_VENDOR_ID_INTEL 0x8086
>> @@ -155,6 +159,11 @@
>> #define PCI_VENDOR_ID_VMWARE 0x15AD
>> #endif
>>
>> +#ifndef PCI_VENDOR_ID_CISCO
>> +/** Vendor ID used by Cisco VIC devices */
>> +#define PCI_VENDOR_ID_CISCO 0x1137
>> +#endif
>> +
>> /******************** Physical EM devices from e1000_hw.h
>>********************/
>>
>> #define E1000_DEV_ID_82542 0x1000
>> @@ -548,6 +557,14 @@ RTE_PCI_DEV_ID_DECL_VMXNET3(PCI_VENDOR_ID_VMWARE,
>>VMWARE_DEV_ID_VMXNET3)
>>
>> RTE_PCI_DEV_ID_DECL_FM10KVF(PCI_VENDOR_ID_INTEL, FM10K_DEV_ID_VF)
>>
>> +/****************** Cisco VIC devices ******************/
>> +
>> +#define PCI_DEVICE_ID_CISCO_VIC_ENET 0x0043 /* ethernet vnic
>>*/
>> +#define PCI_DEVICE_ID_CISCO_VIC_ENET_VF 0x0071 /* enet SRIOV VF
>>*/
>> +
>> +RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO,
>>PCI_DEVICE_ID_CISCO_VIC_ENET)
>> +RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO,
>>PCI_DEVICE_ID_CISCO_VIC_ENET_VF)
>> +
>> /*
>> * Undef all RTE_PCI_DEV_ID_DECL_* here.
>> */
>> --
>> 1.9.1
>>
More information about the dev
mailing list