[dpdk-dev] DPDK ACL bug? pkt matches the wrong ACL rule.

Zi Hu huzilucky at gmail.com
Wed May 20 19:17:46 CEST 2015


Hi, Konstantin,

The patch does fix the bug with the my test rule/trace file.
I will do a little bit more test later to verify that.

thanks a lot.
-Zi

On Wed, May 20, 2015 at 7:28 AM, Ananyev, Konstantin <
konstantin.ananyev at intel.com> wrote:

>
> Hi Zi,
>
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Zi Hu
> > Sent: Friday, May 15, 2015 1:27 AM
> > To: dev at dpdk.org
> > Subject: [dpdk-dev] DPDK ACL bug? pkt matches the wrong ACL rule.
> >
> > Hi, there,
> >
> > I recently noticed that sometimes packets are matched with the wrong ACL
> > rules when using the DPDK ACL library.
> >
> > I tested it with the "testacl" under dpdk/build/app:
> > Here are my rule file and trace file:
> > cat test_data/rule1
> > @192.168.0.0/24 192.168.0.0/24 400 : 500 0 : 52 6/0xff
> > @192.168.0.0/24 192.168.0.0/24 400 : 500 54 : 65280 6/0xff
> > @192.168.0.0/24 192.168.0.0/24 400 : 500 0 : 65535 6/0xff
> >
> >  cat test_data/trace1
> > 0xc0a80005 0xc0a80009 450 53 0x06
> >
> > I run the test by:
> > sudo ./testacl -n 2 -c 4 -- --rulesf=./test_data/rule1
> > --tracef=./test_data/trace1
> >
> > Result:
> > .....
> > acl context <TESTACL>@0x7f5b43effac0
> >   socket_id=-1
> >   alg=2
> >   max_rules=65536
> >   rule_size=96
> >   num_rules=3
> >   num_categories=3
> >   num_tries=1
> > ipv4_5tuple: 1, category: 0, result: 1
> > search_ip5tuples_once(1, 256, sse) returns 1
> > search_ip5tuples  @lcore 2: 1 iterations, 1 pkts, 1 categories, 21812
> > cycles, 21812.000000 cycles/pkt
> >
> >
> > The result shows that the packet matches the second rule,  which is
> wrong.
> > The dest port of the pkt is 53, so it should match the third rule.
> > How possible could it match the second rule?  Anyone see similar
> situation
> > before?
> >
> > Another interesting I found  is that if we make the dest port range to be
> > 54 : 65279 in the second rule (only change 65280 to 65279, all other
> stuff
> > remains the same):
> >
> > cat test_data/rule1
> > @192.168.0.0/24 192.168.0.0/24 400 : 500 0 : 52 6/0xff
> > @192.168.0.0/24 192.168.0.0/24 400 : 500 54 : 65279 6/0xff
> > @192.168.0.0/24 192.168.0.0/24 400 : 500 0 : 65535 6/0xff
> >
> > Then run the test again, the packet matches the third rule as expected.
> >
> >
> > This seems really weird to me. Anyone has an explanation for that?
> >
> > thanks
> > -Zi
>
> I think I found the culprit.
> Problem is that acl_merge_trie()  sometimes is too aggressive in trying to
> conserve some space at build time.
> So didn't duplicate a node, even when it should.
> Could you try a patch below?
> Thanks
> Konstantin
>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev at intel.com>
> ---
>  lib/librte_acl/acl_bld.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/lib/librte_acl/acl_bld.c b/lib/librte_acl/acl_bld.c
> index a406737..92a85df 100644
> --- a/lib/librte_acl/acl_bld.c
> +++ b/lib/librte_acl/acl_bld.c
> @@ -1044,9 +1044,7 @@ acl_merge_trie(struct acl_build_context *context,
>          * a subtree of the merging tree (node B side). Otherwise,
>          * just use node A.
>          */
> -       if (level > 0 &&
> -                       node_a->subtree_id !=
> -                       (subtree_id | RTE_ACL_SUBTREE_NODE)) {
> +       if (level > 0) {
>                 node_c = acl_dup_node(context, node_a);
>                 node_c->subtree_id = subtree_id | RTE_ACL_SUBTREE_NODE;
>         }
> --
> 1.8.5.3
>
>


More information about the dev mailing list