[dpdk-dev] FW: Vhost user no connection vm2vm

[Gaohaifeng (A)]

Hi Maciej
	Did you solve your problem? I meet this problem as your case. And I found avail_idx(in rte_vhost_dequeue_burst function) is always zero although I do send packets in VM.

Thanks.


> Hello, I have strange issue with example/vhost app.
> 
> I had compiled DPDK to run a vhost example app with followed flags
> 
> CONFIG_RTE_LIBRTE_VHOST=y
> CONFIG_RTE_LIBRTE_VHOST_USER=y
> CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
> 
> then I run vhost app based on documentation:
> 
>  ./build/app/vhost-switch -c f -n 4  --huge-dir /mnt/huge --socket-mem 
> 3712
> -- -p 0x1 --dev-basename usvhost --vm2vm 1 --stats 9
> 
> -I use this strange --socket-mem 3712 because of physical limit of 
> memoryon device -with this vhost user I run two KVM machines with 
> followed parameters
> 
> kvm -nographic -boot c -machine pc-i440fx-1.4,accel=kvm -name vm1 -cpu 
> host -smp 2 -hda /home/ubuntu/qemu/debian_squeeze2_amd64.qcow2 -m
> 1024 -mem-path /mnt/huge -mem-prealloc -chardev 
> socket,id=char1,path=/home/ubuntu/dpdk/examples/vhost/usvhost
> -netdev type=vhost-user,id=hostnet1,chardev=char1
> -device virtio-net
> pci,netdev=hostnet1,id=net1,csum=off,gso=off,guest_tso4=off,guest_tso6
> =
> off,guest_ecn=off
> -chardev
> socket,id=char2,path=/home/ubuntu/dpdk/examples/vhost/usvhost
> -netdev type=vhost-user,id=hostnet2,chardev=char2
> -device
> virtio-net-
> pci,netdev=hostnet2,id=net2,csum=off,gso=off,guest_tso4=off,guest_tso6
> =
> off,guest_ecn=off
> 
> After running KVM virtio correctly starting (below logs from vhost app) ...
> VHOST_CONFIG: mapped region 0 fd:31 to 0x2aaabae00000 sz:0xa0000
> off:0x0
> VHOST_CONFIG: mapped region 1 fd:37 to 0x2aaabb000000 sz:0x10000000
> off:0xc0000
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_NUM
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_BASE
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_ADDR
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_KICK
> VHOST_CONFIG: vring kick idx:0 file:38
> VHOST_CONFIG: virtio isn't ready for processing.
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_NUM
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_BASE
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_ADDR
> VHOST_CONFIG: read message VHOST_USER_SET_VRING_KICK
> VHOST_CONFIG: vring kick idx:1 file:39
> VHOST_CONFIG: virtio is now ready for processing.
> VHOST_DATA: (1) Device has been added to data core 2
> 
> So everything looking good.
> 
> Maybe it is something trivial but using options: --vm2vm 1 (or) 2 
> --stats 9 it seems that I didn't have connection between VM2VM 
> communication. I set manually IP for eth0 and eth1:
> 
> on 1 VM
> ifconfig eth0 192.168.0.100 netmask 255.255.255.0 up ifconfig eth1
> 192.168.1.101 netmask 255.255.255.0 up
> 
> on 2 VM
> ifconfig eth0 192.168.1.200 netmask 255.255.255.0 up ifconfig eth1
> 192.168.0.202 netmask 255.255.255.0 up
> 
> I notice that in vhostapp are one directional rx/tx queue so I tryied 
> to ping between VM1 to VM2 using both interfaces ping -I eth0 
> 192.168.1.200 ping -I
> eth1 192.168.1.200 ping -I eth0 192.168.0.202 ping -I eth1 
> 192.168.0.202
> 
> on VM2 using tcpdump on both interfaces I didn't see any ICMP requests 
> or traffic
> 
> And I cant ping between any IP/interfaces, moreover stats show me that:
> 
> Device statistics ====================================
> Statistics for device 0 ------------------------------
> TX total:               0
> TX dropped:             0
> TX successful:          0
> RX total:               0
> RX dropped:             0
> RX successful:          0
> Statistics for device 1 ------------------------------
> TX total:               0
> TX dropped:             0
> TX successful:          0
> RX total:               0
> RX dropped:             0
> RX successful:          0
> Statistics for device 2 ------------------------------
> TX total:               0
> TX dropped:             0
> TX successful:          0
> RX total:               0
> RX dropped:             0
> RX successful:          0
> Statistics for device 3 ------------------------------
> TX total:               0
> TX dropped:             0
> TX successful:          0
> RX total:               0
> RX dropped:             0
> RX successful:          0
> ======================================================
> 
> So it seems like any packet didn't leave my VM.
> also arp table is empty on each VM.