[dpdk-dev] I have a problem in setting up DPDK 2.1.0 in Fedora OS release 20 (Heisenbug). I cannot r
Xu, Qian Q
qian.q.xu at intel.com
Wed Oct 14 03:38:46 CEST 2015
What's your NIC?
Thanks
Qian
-----Original Message-----
From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of ???
Sent: Wednesday, October 14, 2015 9:29 AM
To: dev at dpdk.org
Subject: [dpdk-dev] I have a problem in setting up DPDK 2.1.0 in Fedora OS release 20 (Heisenbug). I cannot r
Dear DPDK experts.
Thank you very much for your best great efforts and precious answers.
I have a problem in setting up DPDK 2.1.0 in Fedora OS release 20 (Heisenbug).
My problem is that I cannot receive any traffics in test-pmd.
There are 2 nics (2 port NIC), I connected port 0 to port 1(loopback), port 2 to port3 (loopback).
I attached details of my setup. I also attached my DPDK setup shell script.
Did I miss something? or Is there any my mistakes?
I will really appreciate if you check them and I can be given any advice and answers.
It is important for me and urgent job.
Thank you very much.
Sincerely Yours,
Ick-Sung Choi.
* test-pmd log.
$ sudo ./build/app/testpmd -c 0xF -n 4 -- -i --portmask=0xF --nb-cores=3
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 8 on socket 0
EAL: Detected lcore 6 as core 9 on socket 0
EAL: Detected lcore 7 as core 10 on socket 0
EAL: Detected lcore 8 as core 11 on socket 0
EAL: Detected lcore 9 as core 12 on socket 0
EAL: Detected lcore 10 as core 0 on socket 1
EAL: Detected lcore 11 as core 1 on socket 1
EAL: Detected lcore 12 as core 2 on socket 1
EAL: Detected lcore 13 as core 3 on socket 1
EAL: Detected lcore 14 as core 4 on socket 1
EAL: Detected lcore 15 as core 8 on socket 1
EAL: Detected lcore 16 as core 9 on socket 1
EAL: Detected lcore 17 as core 10 on socket 1
EAL: Detected lcore 18 as core 11 on socket 1
EAL: Detected lcore 19 as core 12 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 20 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000000 bytes
EAL: Virtual area found at 0x7f85eb000000 (size = 0x1000000)
EAL: Ask a virtual area of 0x3800000 bytes
EAL: Virtual area found at 0x7f85e7600000 (size = 0x3800000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f85e7200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f85e6e00000 (size = 0x200000)
EAL: Ask a virtual area of 0xfb400000 bytes
EAL: Virtual area found at 0x7f84eb800000 (size = 0xfb400000)
EAL: Ask a virtual area of 0xffc00000 bytes
EAL: Virtual area found at 0x7f83eba00000 (size = 0xffc00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f83eb600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f83eb200000 (size = 0x200000)
EAL: Requesting 2048 pages of size 2MB from socket 0
EAL: Requesting 2048 pages of size 2MB from socket 1
EAL: TSC frequency is ~2793267 KHz
EAL: Master lcore 0 is ready (tid=ee4a0940;cpuset=[0])
EAL: lcore 3 is ready (tid=ea1cf700;cpuset=[3])
EAL: lcore 2 is ready (tid=ecc69700;cpuset=[2])
EAL: lcore 1 is ready (tid=ed46a700;cpuset=[1])
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: Not managed by a supported kernel driver, skipped
EAL: PCI device 0000:04:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: Not managed by a supported kernel driver, skipped
EAL: PCI device 0000:04:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: Not managed by a supported kernel driver, skipped
EAL: PCI device 0000:04:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: Not managed by a supported kernel driver, skipped
EAL: PCI device 0000:09:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f85ec000000
EAL: PCI memory mapped at 0x7f85ec080000
PMD: eth_ixgbe_dev_init(): MAC: 2, PHY: 18, SFP+: 5
PMD: eth_ixgbe_dev_init(): port 0 vendorID=0x8086 deviceID=0x10fb
EAL: PCI device 0000:09:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f85ec084000
EAL: PCI memory mapped at 0x7f85ec104000
PMD: eth_ixgbe_dev_init(): MAC: 2, PHY: 18, SFP+: 6
PMD: eth_ixgbe_dev_init(): port 1 vendorID=0x8086 deviceID=0x10fb
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f85ec108000
EAL: PCI memory mapped at 0x7f85ec188000
PMD: eth_ixgbe_dev_init(): MAC: 2, PHY: 18, SFP+: 5
PMD: eth_ixgbe_dev_init(): port 2 vendorID=0x8086 deviceID=0x10fb
EAL: PCI device 0000:81:00.1 on NUMA socket 1
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f85ec18c000
EAL: PCI memory mapped at 0x7f85ec20c000
PMD: eth_ixgbe_dev_init(): MAC: 2, PHY: 18, SFP+: 6
PMD: eth_ixgbe_dev_init(): port 3 vendorID=0x8086 deviceID=0x10fb Interactive-mode selected Configuring Port 0 (socket 0)
PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f85e6f8a5c0 hw_ring=0x7f85e6f8c600 dma_addr=0x6c158c600
PMD: ixgbe_set_tx_function(): Using simple tx code path
PMD: ixgbe_set_tx_function(): Vector tx enabled.
PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f85e6f79cc0 sw_sc_ring=0x7f85e6f79780 hw_ring=0x7f85e6f7a200 dma_addr=0x6c157a200
PMD: ixgbe_set_rx_function(): Vector rx enabled, please make sure RX burst size no less than 32.
Port 0: 90:E2:BA:8B:BF:C0
Configuring Port 1 (socket 0)
PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f85e6f674c0 hw_ring=0x7f85e6f69500 dma_addr=0x6c1569500
PMD: ixgbe_set_tx_function(): Using simple tx code path
PMD: ixgbe_set_tx_function(): Vector tx enabled.
PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f85e6f56bc0 sw_sc_ring=0x7f85e6f56680 hw_ring=0x7f85e6f57100 dma_addr=0x6c1557100
PMD: ixgbe_set_rx_function(): Vector rx enabled, please make sure RX burst size no less than 32.
Port 1: 90:E2:BA:8B:BF:C1
Configuring Port 2 (socket 0)
PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f85e6f443c0 hw_ring=0x7f85e6f46400 dma_addr=0x6c1546400
PMD: ixgbe_set_tx_function(): Using simple tx code path
PMD: ixgbe_set_tx_function(): Vector tx enabled.
PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f85e6f33ac0 sw_sc_ring=0x7f85e6f33580 hw_ring=0x7f85e6f34000 dma_addr=0x6c1534000
PMD: ixgbe_set_rx_function(): Vector rx enabled, please make sure RX burst size no less than 32.
Port 2: 90:E2:BA:8B:B8:CC
Configuring Port 3 (socket 0)
PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f85e6f212c0 hw_ring=0x7f85e6f23300 dma_addr=0x6c1523300
PMD: ixgbe_set_tx_function(): Using simple tx code path
PMD: ixgbe_set_tx_function(): Vector tx enabled.
PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f85e6f109c0 sw_sc_ring=0x7f85e6f10480 hw_ring=0x7f85e6f10f00 dma_addr=0x6c1510f00
PMD: ixgbe_set_rx_function(): Vector rx enabled, please make sure RX burst size no less than 32.
Port 3: 90:E2:BA:8B:B8:CD
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex Port 1 Link Up - speed 10000 Mbps - full-duplex Port 2 Link Up - speed 10000 Mbps - full-duplex Port 3 Link Up - speed 10000 Mbps - full-duplex Done
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-badcrc: 0 RX-badlen: 0 RX-errors: 5
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-badcrc: 0 RX-badlen: 0 RX-errors: 3
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-badcrc: 0 RX-badlen: 0 RX-errors: 4
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 3 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-badcrc: 0 RX-badlen: 0 RX-errors: 3
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
testpmd> start tx_first io packet forwarding - CRC stripping disabled - packets/burst=32
nb forwarding cores=3 - nb forwarding ports=4
RX queues=1 - RX desc=128 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
TX queues=1 - TX desc=512 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX RS bit threshold=32 - TXQ flags=0xf01
testpmd>
testpmd>
testpmd>
testpmd> stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
RX-badcrc: 0 RX-badlen: 0 RX-error: 5
RX-nombufs: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
RX-badcrc: 0 RX-badlen: 0 RX-error: 3
RX-nombufs: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 2 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
RX-badcrc: 0 RX-badlen: 0 RX-error: 4
RX-nombufs: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 3 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
RX-badcrc: 0 RX-badlen: 0 RX-error: 3
RX-nombufs: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
testpmd> quitStopping port 0...done
Stopping port 1...done
Stopping port 2...done
Stopping port 3...done
bye...
* Port setup.
Network devices using DPDK-compatible driver ============================================
0000:09:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused=ixgbe,vfio-pci
0000:09:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused=ixgbe,vfio-pci
0000:81:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused=ixgbe,vfio-pci
0000:81:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused=ixgbe,vfio-pci
Network devices using kernel driver
===================================
0000:04:00.0 'I350 Gigabit Network Connection' if=em1 drv=igb unused=igb_uio,vfio-pci *Active*
0000:04:00.1 'I350 Gigabit Network Connection' if=em2 drv=igb unused=igb_uio,vfio-pci
0000:04:00.2 'I350 Gigabit Network Connection' if=em3 drv=igb unused=igb_uio,vfio-pci
0000:04:00.3 'I350 Gigabit Network Connection' if=em4 drv=igb unused=igb_uio,vfio-pci
Other network devices
=====================
<none>
* I used 2048 for NUMA node 0, 2048 for NUMA node 1.
/proc/meminfo file.
HugePages_Total: 4096
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
* Fedora OS version : Fedora release 20 (Heisenbug)
* gcc version : gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7).
* Intel(R) Xeon(R) CPU E5-2680 10 cores, 64G bytes system memory.
* 2 2-port NIC cards, Intel® 82599ES 10 Gigabit Ethernet 2 port Controller. SFI/SFP+. optical link. Hence there are 4 10 GbE ports.
* I attached DPDK setup script in my environment.
Thank you very much.
Sincerely Yours,
Ick-Sung Choi.
More information about the dev
mailing list