[dpdk-dev] [PATCH 00/34] update e1000 base driver

[Wenzhuo Lu]

Short summary:
*update readme and copyright
*add new devices
*fix issue with link flap on 82579
*fix issue with jumbo frame CRC failures in client
*redundant PHY power down for i210
*add return value to the functions of setting receive address register
*add defaults for i210 TX/RX PBSIZE
*remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after commencing HW reset
*add evaluation of e1000_nvm_read return value
*change invariant return to not use variables
*add return value handler when check manage mode
*add return value handler for ESB2 controller init and reset
*add support for inverted format ETrackId
*add EEARBC_I210 for i210
*apply paranoia to macro arguments
*add flags to set eee advertisement modes
*prevent ulp flow if cable connected
*fix TIPG value for non 10 half duplex mode
*add return value for resume workaround
*fix link detect flow
*cleanup NAHUM6LP_HW tags
*add bit for disable packetbuffer read
*K1 flow fixes
*remove FIXME comment
*set correct value of beacon duration
*disable extension header parsing for IPv6
*fix for i354 88E1112 PHY using AutoMedia Detect
*increase timeout of polling bit RSPCIPHY in check_reset_block
*implement 88E1543 PHY initialization
*use the correct i210 register for EEMNGCTL
*move the print to the right position
*synchronization of MAC-PHY interface only on non- ME systems
*fix to enable both ulp and EEE in Sx state

Wenzhuo Lu (34):
  e1000/base: update readme and copyright
  e1000/base: add new devices
  e1000/base: fix issue with link flap on 82579
  e1000/base: fix issue with jumbo frame CRC failures in client
  e1000/base: redundant PHY power down for i210
  e1000/base: add return value to the functions of setting receive
    address register
  e1000/base: add defaults for i210 TX/RX PBSIZE
  e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after
    commencing HW reset
  e1000/base: add evaluation of e1000_nvm_read return value
  e1000/base: change invariant return to not use variables
  e1000/base: add return value handler when check manage mode
  e1000/base: add return value handler for ESB2 controller init and
    reset
  e1000/base: add support for inverted format ETrackId
  e1000/base: add EEARBC_I210 for i210
  e1000/base: apply paranoia to macro arguments
  e1000/base: add flags to set eee advertisement modes
  e1000/base: prevent ulp flow if cable connected
  e1000/base: fix TIPG value for non 10 half duplex mode
  e1000/base: add return value for resume workaround
  e1000/base: fix link detect flow
  e1000/base: cleanup NAHUM6LP_HW tags
  e1000/base: add bit for disable packetbuffer read
  e1000/base: K1 flow fixes
  e1000/base: remove FIXME comment
  e1000/base: set correct value of beacon duration
  e1000/base: disable extension header parsing for IPv6
  e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect
  e1000/base: increase timeout of polling bit RSPCIPHY in
    check_reset_block
  e1000/base: implement 88E1543 PHY initialization
  e1000/base: use the correct i210 register for EEMNGCTL
  e1000/base: move the print to the right position
  e1000/base: synchronization of MAC-PHY interface only on non- ME
    systems
  e1000/base: fix to enable both ulp and EEE in Sx state
  e1000/base: some minor change

 drivers/net/e1000/base/README              |   4 +-
 drivers/net/e1000/base/e1000_80003es2lan.c |  33 ++--
 drivers/net/e1000/base/e1000_80003es2lan.h |   2 +-
 drivers/net/e1000/base/e1000_82540.c       |   2 +-
 drivers/net/e1000/base/e1000_82541.c       |   2 +-
 drivers/net/e1000/base/e1000_82541.h       |   2 +-
 drivers/net/e1000/base/e1000_82542.c       |   8 +-
 drivers/net/e1000/base/e1000_82543.c       |   2 +-
 drivers/net/e1000/base/e1000_82543.h       |   2 +-
 drivers/net/e1000/base/e1000_82571.c       |   8 +-
 drivers/net/e1000/base/e1000_82571.h       |   2 +-
 drivers/net/e1000/base/e1000_82575.c       | 205 +++++++++++++++++++----
 drivers/net/e1000/base/e1000_82575.h       |   7 +-
 drivers/net/e1000/base/e1000_api.c         |  12 +-
 drivers/net/e1000/base/e1000_api.h         |  20 +--
 drivers/net/e1000/base/e1000_defines.h     |   8 +-
 drivers/net/e1000/base/e1000_hw.h          |  16 +-
 drivers/net/e1000/base/e1000_i210.c        |  49 +++++-
 drivers/net/e1000/base/e1000_i210.h        |   2 +-
 drivers/net/e1000/base/e1000_ich8lan.c     | 252 ++++++++++++++++++++---------
 drivers/net/e1000/base/e1000_ich8lan.h     |  43 ++---
 drivers/net/e1000/base/e1000_mac.c         |  14 +-
 drivers/net/e1000/base/e1000_mac.h         |   4 +-
 drivers/net/e1000/base/e1000_manage.c      |   7 +-
 drivers/net/e1000/base/e1000_manage.h      |   2 +-
 drivers/net/e1000/base/e1000_mbx.c         |   2 +-
 drivers/net/e1000/base/e1000_mbx.h         |   2 +-
 drivers/net/e1000/base/e1000_nvm.c         |  11 +-
 drivers/net/e1000/base/e1000_nvm.h         |   2 +-
 drivers/net/e1000/base/e1000_osdep.h       |   1 -
 drivers/net/e1000/base/e1000_phy.c         |  21 +--
 drivers/net/e1000/base/e1000_phy.h         |  10 +-
 drivers/net/e1000/base/e1000_regs.h        |  13 +-
 drivers/net/e1000/base/e1000_vf.c          |   8 +-
 drivers/net/e1000/base/e1000_vf.h          |   4 +-
 35 files changed, 554 insertions(+), 228 deletions(-)

-- 
1.9.3