[dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking

[Qiu, Michael]

On 2015/10/15 19:07, He, Shaopeng wrote:
> Hi, Michael
>
>> -----Original Message-----
>> From: Qiu, Michael
>> Sent: Thursday, October 15, 2015 2:28 PM
>> To: He, Shaopeng; dev at dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking
>>
>> On 2015/9/30 15:29, Shaopeng He wrote:
>>> Add multi-queue checking in device configure process.
>>> Currently, VMDQ and RSS are supported.
>>>
>>> Signed-off-by: Shaopeng He <shaopeng.he at intel.com>
>>> ---
>>>  drivers/net/fm10k/fm10k_ethdev.c | 44
>>> ++++++++++++++++++++++++++++++++++++++++
>>>  1 file changed, 44 insertions(+)
>>>
>>> diff --git a/drivers/net/fm10k/fm10k_ethdev.c
>>> b/drivers/net/fm10k/fm10k_ethdev.c
>>> index a69c990..082937d 100644
>>> --- a/drivers/net/fm10k/fm10k_ethdev.c
>>> +++ b/drivers/net/fm10k/fm10k_ethdev.c
>>> @@ -283,12 +283,56 @@ tx_queue_disable(struct fm10k_hw *hw,
>> uint16_t
>>> qnum)  }
>>>
>>>  static int
>>> +fm10k_check_mq_mode(struct rte_eth_dev *dev) {
>>> +	enum rte_eth_rx_mq_mode rx_mq_mode = dev->data-
>>> dev_conf.rxmode.mq_mode;
>>> +	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data-
>>> dev_private);
>>> +	struct rte_eth_vmdq_rx_conf *vmdq_conf;
>>> +	uint16_t nb_rx_q = dev->data->nb_rx_queues;
>>> +
>>> +	vmdq_conf = &dev->data->dev_conf.rx_adv_conf.vmdq_rx_conf;
>>> +
>>> +	if (rx_mq_mode & ETH_MQ_RX_DCB_FLAG) {
>>> +		PMD_INIT_LOG(ERR, "DCB mode is not supported.");
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	if (!(rx_mq_mode & ETH_MQ_RX_VMDQ_FLAG))
>>> +		return 0;
>>> +
>>> +	if (hw->mac.type == fm10k_mac_vf) {
>>> +		PMD_INIT_LOG(ERR, "VMDQ mode is not supported in VF.");
>>> +		return -EINVAL;
>>> +	}
>> I think vf check should be the first one, then we do not need check dcb and
>> VMDq flag.
>>
>> Thanks,
>> Michael
> Thanks for the comments. There is a case of RSS support on VF, if vf check be 
> the first one, it will return fail, which is not correct.

OK, you are right.

Thanks,
Michael
> Thanks,
> --Shaopeng
>>> +
>>> +	/* Check VMDQ queue pool number */
>>> +	if (vmdq_conf->nb_queue_pools >
>>> +			sizeof(vmdq_conf->pool_map[0].pools) * CHAR_BIT
>> ||
>>> +			vmdq_conf->nb_queue_pools > nb_rx_q) {
>>> +		PMD_INIT_LOG(ERR, "Too many of queue pools: %d",
>>> +			vmdq_conf->nb_queue_pools);
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int
>>>  fm10k_dev_configure(struct rte_eth_dev *dev)  {
>>> +	int ret;
>>> +
>>>  	PMD_INIT_FUNC_TRACE();
>>>
>>>  	if (dev->data->dev_conf.rxmode.hw_strip_crc == 0)
>>>  		PMD_INIT_LOG(WARNING, "fm10k always strip CRC");
>>> +	/* multipe queue mode checking */
>>> +	ret  = fm10k_check_mq_mode(dev);
>>> +	if (ret != 0) {
>>> +		PMD_DRV_LOG(ERR, "fm10k_check_mq_mode fails
>> with %d.",
>>> +			    ret);
>>> +		return ret;
>>> +	}
>>>
>>>  	return 0;
>>>  }
>