[dpdk-dev] testpmd - configuration of the fdir filter

[Navneet Rao]

I'm getting a fdir filter programming error after I do this --

 

 

./testpmd -c ffffffff -n 4 -- -i --pkt-filter-mode=perfect --rxq=2 --txq=2 --portmask=0x3 --nb-ports=2 --disable-rss

 

   testpmd> port stop all

   testpmd> flow_director_mask 0 vlan 0xefff src_mask 255.255.255.255 FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF 0xFFFF dst_mask 255.255.255.255 FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF 0xFFFF

   testpmd> flow_director_filter 0 add flow ipv4-udp src 192.168.10.100 dst 192.168.10.101 vlan 0x1 flexbytes (0x00,0x00) fwd queue 1 fd_id 1

   PMD: fdir_write_perfect_filter_82599(): Rx Queue=1 hash=10529

   PMD: fdir_write_perfect_filter_82599(): Timeout writing flow director filter.

   PMD: ixgbe_add_del_fdir_filter(): Fail to add FDIR filter!

   flow director programming error: (Connection timed out)

 

 

Any ideas? Debug?

 

Thanks

-Navneet

 

 

 

 

-----Original Message-----
From: Navneet Rao 
Sent: Wednesday, September 09, 2015 10:26 AM
To: Jan Fruhbauer
Subject: RE: [dpdk-dev] testpmd - configuration of the fdir filter

 

Hello Jan:

 

Please let me know if you were able to figure this out...

I am also running into similar issues!!!

 

Thanks

-Navneet

 

 

-----Original Message-----

From: Jan Fruhbauer [mailto:fruhbauer at invea.com] 

Sent: Friday, September 04, 2015 3:46 AM

To: HYPERLINK "mailto:dev at dpdk.org"dev at dpdk.org

Subject: [dpdk-dev] testpmd - configuration of the fdir filter

 

Hi,

 

I want to use the fdir filtering on a NIC based on the Intel 82599. I have tested the testpmd application. I configured masks and added a filter but the fdir filter never matched any packet. I even tried different masks and filters (with/without ports, TCP/UDP flow, IP prefixes, ...), but it never worked. Here is an example of commands I used during testing:

 

./testpmd -c 0xff -n 2 -- -i --rxq=2 --txq=2 --pkt-filter-mode=perfect

--portmask=0x3 --nb-ports=2 --disable-rss

testpmd> port stop 0

testpmd> flow_director_mask 0 vlan 0x0000 src_mask 255.255.255.255

FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF 0xFFFF dst_mask 255.255.255.255 FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF 0xFFFF

testpmd> flow_director_flex_mask 0 flow all

(0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)

testpmd> port start 0

testpmd> flow_director_filter 0 add flow ipv4-tcp src 1.0.0.1 1 dst

2.0.0.1 1 vlan 0x0 flexbytes (0x00,0x00) fwd queue 1 fd_id 1

testpmd> start

 

Then I sent generated traffic (simple packets with ethernet/IP/TCP

headers) with parametrs I specified in the flow_director_filter to the NIC port 0 and all packets arrived to the queue 0.

 

Please, could you advise me what I am doing wrong? Maybe some other configuration I didn't notice?

 

Regards,

Jan