[dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
Arthas
kangzy1982 at qq.com
Fri Sep 25 06:37:41 CEST 2015
Hi, Zhigang,
I fixed register memseg error, but gxio_mpipe_equeue_put_at send packet still failed.
Command: run cat /proc/meminfo
MemTotal: 8230016 kB
MemFree: 3866688 kB
Buffers: 0 kB
Cached: 16576 kB
SwapCached: 0 kB
Active: 11392 kB
Inactive: 9088 kB
Active(anon): 11392 kB
Inactive(anon): 9088 kB
Active(file): 0 kB
Inactive(file): 0 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 0 kB
Mapped: 3072 kB
Shmem: 16320 kB
Slab: 17024 kB
SReclaimable: 768 kB
SUnreclaim: 16256 kB
KernelStack: 11456 kB
PageTables: 0 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 2017856 kB
Committed_AS: 22976 kB
VmallocTotal: 4194304 kB
VmallocUsed: 224704 kB
VmallocChunk: 3964864 kB
Sequestered: 46144 kB
HugePages_Total: 4
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
_init_dpdk_eal_params: -c 0xffffffff -m 4096 -r 1 -n 1 --log-level 8 --vdev xgbe1 --vdev xgbe2 --log-level 8 --no-hpet
main: rte_eal_init.
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 8 on socket 0
EAL: Detected lcore 9 as core 9 on socket 0
EAL: Detected lcore 10 as core 10 on socket 0
EAL: Detected lcore 11 as core 11 on socket 0
EAL: Detected lcore 12 as core 12 on socket 0
EAL: Detected lcore 13 as core 13 on socket 0
EAL: Detected lcore 14 as core 14 on socket 0
EAL: Detected lcore 15 as core 15 on socket 0
EAL: Detected lcore 16 as core 16 on socket 0
EAL: Detected lcore 17 as core 17 on socket 0
EAL: Detected lcore 18 as core 18 on socket 0
EAL: Detected lcore 19 as core 19 on socket 0
EAL: Detected lcore 20 as core 20 on socket 0
EAL: Detected lcore 21 as core 21 on socket 0
EAL: Detected lcore 22 as core 22 on socket 0
EAL: Detected lcore 23 as core 23 on socket 0
EAL: Detected lcore 24 as core 24 on socket 0
EAL: Detected lcore 25 as core 25 on socket 0
EAL: Detected lcore 26 as core 26 on socket 0
EAL: Detected lcore 27 as core 27 on socket 0
EAL: Detected lcore 28 as core 28 on socket 0
EAL: Detected lcore 29 as core 29 on socket 0
EAL: Detected lcore 30 as core 30 on socket 0
EAL: Detected lcore 31 as core 31 on socket 0
EAL: Detected lcore 32 as core 32 on socket 0
EAL: Detected lcore 33 as core 33 on socket 0
EAL: Detected lcore 34 as core 34 on socket 0
EAL: Detected lcore 35 as core 35 on socket 0
EAL: Support maximum 36 logical core(s) by configuration.
EAL: Detected 36 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x100000000 bytes
EAL: Virtual area found at 0x1fe40000000 (size = 0x100000000)
EAL: Requesting 4 pages of size 1024MB from socket 0
EAL: TSC frequency is ~1199999 KHz
EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=f7f34690;cpuset=[0])
PMD: mpipe init xgbe1
PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a).
PMD: mpipe init xgbe2
PMD: xgbe2: Initialized mpipe device(mac ee:d1:53:72:82:5b).
EAL: lcore 1 is ready (tid=eb1df060;cpuset=[1])
EAL: lcore 2 is ready (tid=ea9df060;cpuset=[2])
EAL: lcore 3 is ready (tid=ea1df060;cpuset=[3])
EAL: lcore 4 is ready (tid=e99df060;cpuset=[4])
EAL: lcore 5 is ready (tid=e91df060;cpuset=[5])
EAL: lcore 6 is ready (tid=e89df060;cpuset=[6])
EAL: lcore 7 is ready (tid=dbfff060;cpuset=[7])
EAL: lcore 8 is ready (tid=db7ff060;cpuset=[8])
EAL: lcore 9 is ready (tid=dafff060;cpuset=[9])
EAL: lcore 10 is ready (tid=da7ff060;cpuset=[10])
EAL: lcore 11 is ready (tid=d9fff060;cpuset=[11])
EAL: lcore 12 is ready (tid=d97ff060;cpuset=[12])
EAL: lcore 13 is ready (tid=d8fff060;cpuset=[13])
EAL: lcore 15 is ready (tid=bbfff060;cpuset=[15])
EAL: lcore 14 is ready (tid=d87ff060;cpuset=[14])
EAL: lcore 16 is ready (tid=bb7ff060;cpuset=[16])
EAL: lcore 17 is ready (tid=bafff060;cpuset=[17])
EAL: lcore 18 is ready (tid=ba7ff060;cpuset=[18])
EAL: lcore 19 is ready (tid=b9fff060;cpuset=[19])
EAL: lcore 20 is ready (tid=b97ff060;cpuset=[20])
EAL: lcore 21 is ready (tid=b8fff060;cpuset=[21])
EAL: lcore 22 is ready (tid=b87ff060;cpuset=[22])
EAL: lcore 23 is ready (tid=93fff060;cpuset=[23])
EAL: lcore 24 is ready (tid=937ff060;cpuset=[24])
EAL: lcore 25 is ready (tid=92fff060;cpuset=[25])
EAL: lcore 26 is ready (tid=927ff060;cpuset=[26])
EAL: lcore 27 is ready (tid=91fff060;cpuset=[27])
EAL: lcore 28 is ready (tid=917ff060;cpuset=[28])
EAL: lcore 29 is ready (tid=90fff060;cpuset=[29])
EAL: lcore 30 is ready (tid=907ff060;cpuset=[30])
EAL: lcore 31 is ready (tid=73fff060;cpuset=[31])
main: Detect CPU freq 1200000000
main: Detect 32 CPU cores
main: Probe PCI ethernet devices.
main: Detect 2 Ethernet device
main: pid=2169
_eth_dev_init: Init port 0 mbuf pool pkt_len=1986 nr_pkts=17536 cache=512
_eth_dev_init: Init port 0 mbuf pool pkt_len=1730 nr_pkts=17536 cache=512 pool=0x0x1ff36e3f5c0 success.
_eth_dev_init: Configure port 0 nr_tx=1 nr_rx=1
_eth_dev_init: Configure port 0 rxq=0 rxd=128
PMD: Allocate 128 iqueue descs.
PMD: Init mPIPE buffer stack size index 3
_eth_dev_init: port 0: EE:D1:53:72:82:5A
_eth_dev_init: Configure port 0 txq=0 txd=1024
PMD: Allocate one NotifRing for each queue. max=16
PMD: Allocate a NotifGroup.
PMD: Allocate 256 buckets.
PMD: Allocate 1 mPIPE buffer stack.
PMD: gxio_mpipe_register_page .
PMD: Register mPIPE page 0x1fe40000000 size=1073741824, log2=30 must < 40 & > 12
PMD: Register mPIPE page 0x1fe80000000 size=1073741824, log2=30 must < 40 & > 12
PMD: Register mPIPE page 0x1fec0000000 size=1073741824, log2=30 must < 40 & > 12
PMD: Register mPIPE page 0x1ff00000000 size=1073741824, log2=30 must < 40 & > 12
PMD: xgbe1: Registered segment 0x1fe40000000 - 0x1ff3fffffff
PMD: Allocate mPIPE buffer stack size=65536 341K bytes..
PMD: xgbe1: Buffer stack memory 0x1ff36de0000 - 0x1ff36e3557f.
PMD: xgbe1: eDMA ring memory 0x1ff36e3c000 - 0x1ff36e3dfff.
PMD: xgbe1: iDMA ring 0 memory 0x1ff36e38000 - 0x1ff36e39fff.
PMD: xgbe1: Pushed mbuf 0x1ff3a550080, buffer 0x1ff3a550202 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54f800, buffer 0x1ff3a54f982 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54ef80, buffer 0x1ff3a54f102 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54e700, buffer 0x1ff3a54e882 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54de80, buffer 0x1ff3a54e002 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54d600, buffer 0x1ff3a54d782 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54cd80, buffer 0x1ff3a54cf02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54c500, buffer 0x1ff3a54c682 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54bc80, buffer 0x1ff3a54be02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54b400, buffer 0x1ff3a54b582 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54ab80, buffer 0x1ff3a54ad02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a54a300, buffer 0x1ff3a54a482 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a549a80, buffer 0x1ff3a549c02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a549200, buffer 0x1ff3a549382 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a548980, buffer 0x1ff3a548b02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a548100, buffer 0x1ff3a548282 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a547880, buffer 0x1ff3a547a02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a547000, buffer 0x1ff3a547182 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a546780, buffer 0x1ff3a546902 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a545f00, buffer 0x1ff3a546082 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a545680, buffer 0x1ff3a545802 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a544e00, buffer 0x1ff3a544f82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a544580, buffer 0x1ff3a544702 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a543d00, buffer 0x1ff3a543e82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a543480, buffer 0x1ff3a543602 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a542c00, buffer 0x1ff3a542d82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a542380, buffer 0x1ff3a542502 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a541b00, buffer 0x1ff3a541c82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a541280, buffer 0x1ff3a541402 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a540a00, buffer 0x1ff3a540b82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a540180, buffer 0x1ff3a540302 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53f900, buffer 0x1ff3a53fa82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53f080, buffer 0x1ff3a53f202 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53e800, buffer 0x1ff3a53e982 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53df80, buffer 0x1ff3a53e102 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53d700, buffer 0x1ff3a53d882 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53ce80, buffer 0x1ff3a53d002 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53c600, buffer 0x1ff3a53c782 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53bd80, buffer 0x1ff3a53bf02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53b500, buffer 0x1ff3a53b682 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53ac80, buffer 0x1ff3a53ae02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a53a400, buffer 0x1ff3a53a582 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a539b80, buffer 0x1ff3a539d02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a539300, buffer 0x1ff3a539482 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a538a80, buffer 0x1ff3a538c02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a538200, buffer 0x1ff3a538382 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a537980, buffer 0x1ff3a537b02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a537100, buffer 0x1ff3a537282 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a536880, buffer 0x1ff3a536a02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a536000, buffer 0x1ff3a536182 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a535780, buffer 0x1ff3a535902 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a534f00, buffer 0x1ff3a535082 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a534680, buffer 0x1ff3a534802 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a533e00, buffer 0x1ff3a533f82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a533580, buffer 0x1ff3a533702 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a532d00, buffer 0x1ff3a532e82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a532480, buffer 0x1ff3a532602 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a531c00, buffer 0x1ff3a531d82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a531380, buffer 0x1ff3a531502 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a530b00, buffer 0x1ff3a530c82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a530280, buffer 0x1ff3a530402 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52fa00, buffer 0x1ff3a52fb82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52f180, buffer 0x1ff3a52f302 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52e900, buffer 0x1ff3a52ea82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52e080, buffer 0x1ff3a52e202 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52d800, buffer 0x1ff3a52d982 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52cf80, buffer 0x1ff3a52d102 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52c700, buffer 0x1ff3a52c882 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52be80, buffer 0x1ff3a52c002 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52b600, buffer 0x1ff3a52b782 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52ad80, buffer 0x1ff3a52af02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a52a500, buffer 0x1ff3a52a682 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a529c80, buffer 0x1ff3a529e02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a529400, buffer 0x1ff3a529582 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a528b80, buffer 0x1ff3a528d02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a528300, buffer 0x1ff3a528482 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a527a80, buffer 0x1ff3a527c02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a527200, buffer 0x1ff3a527382 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a526980, buffer 0x1ff3a526b02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a526100, buffer 0x1ff3a526282 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a525880, buffer 0x1ff3a525a02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a525000, buffer 0x1ff3a525182 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a524780, buffer 0x1ff3a524902 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a523f00, buffer 0x1ff3a524082 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a523680, buffer 0x1ff3a523802 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a522e00, buffer 0x1ff3a522f82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a522580, buffer 0x1ff3a522702 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a521d00, buffer 0x1ff3a521e82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a521480, buffer 0x1ff3a521602 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a520c00, buffer 0x1ff3a520d82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a520380, buffer 0x1ff3a520502 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51fb00, buffer 0x1ff3a51fc82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51f280, buffer 0x1ff3a51f402 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51ea00, buffer 0x1ff3a51eb82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51e180, buffer 0x1ff3a51e302 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51d900, buffer 0x1ff3a51da82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51d080, buffer 0x1ff3a51d202 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51c800, buffer 0x1ff3a51c982 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51bf80, buffer 0x1ff3a51c102 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51b700, buffer 0x1ff3a51b882 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51ae80, buffer 0x1ff3a51b002 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a51a600, buffer 0x1ff3a51a782 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a519d80, buffer 0x1ff3a519f02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a519500, buffer 0x1ff3a519682 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a518c80, buffer 0x1ff3a518e02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a518400, buffer 0x1ff3a518582 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a517b80, buffer 0x1ff3a517d02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a517300, buffer 0x1ff3a517482 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a516a80, buffer 0x1ff3a516c02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a516200, buffer 0x1ff3a516382 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a515980, buffer 0x1ff3a515b02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a515100, buffer 0x1ff3a515282 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a514880, buffer 0x1ff3a514a02 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a514000, buffer 0x1ff3a514182 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a513780, buffer 0x1ff3a513902 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a512f00, buffer 0x1ff3a513082 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a512680, buffer 0x1ff3a512802 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a511e00, buffer 0x1ff3a511f82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a511580, buffer 0x1ff3a511702 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a510d00, buffer 0x1ff3a510e82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a510480, buffer 0x1ff3a510602 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50fc00, buffer 0x1ff3a50fd82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50f380, buffer 0x1ff3a50f502 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50eb00, buffer 0x1ff3a50ec82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50e280, buffer 0x1ff3a50e402 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50da00, buffer 0x1ff3a50db82 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50d180, buffer 0x1ff3a50d302 into stack 2
PMD: xgbe1: Pushed mbuf 0x1ff3a50c900, buffer 0x1ff3a50ca82 into stack 2
PMD: xgbe1: Filled 128/128 buffers
PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported
PMD: rte_eth_allmulticast_disable: Function not supported
_eth_dev_init: start port 0 success.
_eth_dev_init: enable port 0 promiscuous.
main: Link Up - speed 10000 Mbps - full-duplex
_tx_pkts_rand_init: Alloc 32 mbuf for port=0
_tx_pkts_rand_init: Prebuild 32 mbuf for port=0
_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 done.
main: launch lcore 1 _mbuf_random_task task port=0 txq=0
_mbuf_random_task: Start mbuf rand task port=0 pool=0x0x1ff36e3f5c0
_mbuf_random_task: Start mbuf rand task daddr=192.168.1.245 dport=80
_mbuf_random_task: Core 1 Exit..
_tx_rand_task: Start TX rand task port=0 txq=0 pkts_burst=32
_wait_for_dev_link_up: TX rand task Core 2 port 0 Link is Up
PMD: Trying to transmit 32 packets on xgbe1:0.
main: launch lcore 2 tx task port=0 txq=0
PMD: xgbe1:0: Sending packet 0x1ff3a50c200, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a50b980, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a50b100, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a50a880, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a50a000, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a509780, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a508f00, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a508680, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a507e00, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a507580, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a506d00, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a506480, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a505c00, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a505380, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a504b00, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a504280, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a503a00, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a503180, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a502900, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a502080, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a501800, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a500f80, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a500700, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4ffe80, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4ff600, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fed80, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fe500, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fdc80, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fd400, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fcb80, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fc300, len 62
PMD: xgbe1:0: Sending packet 0x1ff3a4fba80, len 62
PMD: Ask the mPIPE hardware to egress outstanding packets immediately.
PMD: Wait for mPIPE equeue slot 32 complete.
Regards.
Arthas
------------------ Original ------------------From: "Arthas";<kangzy1982 at qq.com>;
Date: Thu, Sep 24, 2015 01:38 PM
To: "zlu"<zlu at ezchip.com>; "dev"<dev at dpdk.org>;
Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
Hi, Zhigang,
I checked error code and got a error information "(No more IOTLB entries)." & xmit function gxio_mpipe_equeue_try_reserve_fast got "Insufficient DMA credits"!
Command: run ./testpmd -c 0xffffffff -m 6144 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained
gxio_mpipe_init instance 0
gxio_mpipe_init instance 1
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 8 on socket 0
EAL: Detected lcore 9 as core 9 on socket 0
EAL: Detected lcore 10 as core 10 on socket 0
EAL: Detected lcore 11 as core 11 on socket 0
EAL: Detected lcore 12 as core 12 on socket 0
EAL: Detected lcore 13 as core 13 on socket 0
EAL: Detected lcore 14 as core 14 on socket 0
EAL: Detected lcore 15 as core 15 on socket 0
EAL: Detected lcore 16 as core 16 on socket 0
EAL: Detected lcore 17 as core 17 on socket 0
EAL: Detected lcore 18 as core 18 on socket 0
EAL: Detected lcore 19 as core 19 on socket 0
EAL: Detected lcore 20 as core 20 on socket 0
EAL: Detected lcore 21 as core 21 on socket 0
EAL: Detected lcore 22 as core 22 on socket 0
EAL: Detected lcore 23 as core 23 on socket 0
EAL: Detected lcore 24 as core 24 on socket 0
EAL: Detected lcore 25 as core 25 on socket 0
EAL: Detected lcore 26 as core 26 on socket 0
EAL: Detected lcore 27 as core 27 on socket 0
EAL: Detected lcore 28 as core 28 on socket 0
EAL: Detected lcore 29 as core 29 on socket 0
EAL: Detected lcore 30 as core 30 on socket 0
EAL: Detected lcore 31 as core 31 on socket 0
EAL: Detected lcore 32 as core 32 on socket 0
EAL: Detected lcore 33 as core 33 on socket 0
EAL: Detected lcore 34 as core 34 on socket 0
EAL: Detected lcore 35 as core 35 on socket 0
EAL: Support maximum 36 logical core(s) by configuration.
EAL: Detected 36 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x80000000 bytes
EAL: Virtual area found at 0x1ff68000000 (size = 0x80000000)
EAL: Ask a virtual area of 0xc000000 bytes
EAL: Virtual area found at 0x1ff5b000000 (size = 0xc000000)
EAL: Ask a virtual area of 0xf4000000 bytes
EAL: Virtual area found at 0x1fe66000000 (size = 0xf4000000)
EAL: Requesting 384 pages of size 16MB from socket 0
EAL: TSC frequency is ~1199999 KHz
EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=f7f94690;cpuset=[0])
PMD: mpipe init xgbe1
PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a).
EAL: lcore 1 is ready (tid=eaf3f060;cpuset=[1])
EAL: lcore 2 is ready (tid=ea73f060;cpuset=[2])
EAL: lcore 3 is ready (tid=e9f3f060;cpuset=[3])
EAL: lcore 4 is ready (tid=e973f060;cpuset=[4])
EAL: lcore 5 is ready (tid=e8f3f060;cpuset=[5])
EAL: lcore 6 is ready (tid=67fff060;cpuset=[6])
EAL: lcore 7 is ready (tid=677ff060;cpuset=[7])
EAL: lcore 8 is ready (tid=5afff060;cpuset=[8])
EAL: lcore 9 is ready (tid=5a7ff060;cpuset=[9])
EAL: lcore 10 is ready (tid=65fff060;cpuset=[10])
EAL: lcore 11 is ready (tid=657ff060;cpuset=[11])
EAL: lcore 12 is ready (tid=64fff060;cpuset=[12])
EAL: lcore 13 is ready (tid=647ff060;cpuset=[13])
EAL: lcore 14 is ready (tid=3ffff060;cpuset=[14])
EAL: lcore 15 is ready (tid=3f7ff060;cpuset=[15])
EAL: lcore 16 is ready (tid=3efff060;cpuset=[16])
EAL: lcore 17 is ready (tid=3e7ff060;cpuset=[17])
EAL: lcore 18 is ready (tid=3dfff060;cpuset=[18])
EAL: lcore 19 is ready (tid=3d7ff060;cpuset=[19])
EAL: lcore 20 is ready (tid=3cfff060;cpuset=[20])
EAL: lcore 21 is ready (tid=3c7ff060;cpuset=[21])
EAL: lcore 22 is ready (tid=1bfff060;cpuset=[22])
EAL: lcore 23 is ready (tid=1b7ff060;cpuset=[23])
EAL: lcore 24 is ready (tid=1afff060;cpuset=[24])
EAL: lcore 25 is ready (tid=1a7ff060;cpuset=[25])
EAL: lcore 26 is ready (tid=19fff060;cpuset=[26])
EAL: lcore 27 is ready (tid=197ff060;cpuset=[27])
EAL: lcore 28 is ready (tid=18fff060;cpuset=[28])
EAL: lcore 29 is ready (tid=187ff060;cpuset=[29])
EAL: lcore 30 is ready (tid=f7fff060;cpuset=[30])
EAL: lcore 31 is ready (tid=f77ff060;cpuset=[31])
Set txonly packet forwarding mode
Auto-start selected
Configuring Port 0 (socket 0)
PMD: xgbe1: Could not register memseg @0x1ff68000000, -1111(No more IOTLB entries).
PMD: xgbe1: Could not register memseg @0x1ff5b000000, -1111(No more IOTLB entries).
PMD: xgbe1: Could not register memseg @0x1fe66000000, -1111(No more IOTLB entries).
PMD: xgbe1: Buffer stack memory 0x1ff63780000 - 0x1ff637d557f.
PMD: xgbe1: eDMA ring memory 0x1ff637d8000 - 0x1ff637d9fff.
PMD: xgbe1: iDMA ring 0 memory 0x1ff6377c000 - 0x1ff6377dfff.
PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported
PMD: rte_eth_allmulticast_disable: Function not supported
Port 0: EE:D1:53:72:82:5A
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
No commandline core given, start packet forwarding
txonly packet forwarding - CRC stripping disabled - packets/burst=32
packet len=64 - nb packet segments=1
nb forwarding cores=1 - nb forwarding ports=1
RX queues=1 - RX desc=128 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX queues=2 - TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX RS bit threshold=0 - TXQ flags=0x0
Press enter to exit
Command: run cat /proc/meminfo
MemTotal: 8230464 kB
MemFree: 1765120 kB
Buffers: 0 kB
Cached: 42432 kB
SwapCached: 0 kB
Active: 27776 kB
Inactive: 8448 kB
Active(anon): 27776 kB
Inactive(anon): 8448 kB
Active(file): 0 kB
Inactive(file): 0 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 0 kB
Mapped: 3008 kB
Shmem: 17856 kB
Slab: 17984 kB
SReclaimable: 1280 kB
SUnreclaim: 16704 kB
KernelStack: 11456 kB
PageTables: 0 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 969472 kB
Committed_AS: 41280 kB
VmallocTotal: 4194304 kB
VmallocUsed: 224704 kB
VmallocChunk: 3964864 kB
Sequestered: 50816 kB
HugePages_Total: 384
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 16384 kB
------------------ Original ------------------
From: "Arthas";<kangzy1982 at qq.com>;
Date: Thu, Sep 24, 2015 11:47 AM
To: "zlu"<zlu at ezchip.com>; "dev"<dev at dpdk.org>;
Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
Hi, Zhigang
I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not work and exit.
Command: run cat /proc/meminfo
MemTotal: 8230464 kB
MemFree: 3872576 kB
Buffers: 0 kB
Cached: 12480 kB
SwapCached: 0 kB
Active: 11200 kB
Inactive: 5888 kB
Active(anon): 11200 kB
Inactive(anon): 5888 kB
Active(file): 0 kB
Inactive(file): 0 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 4736 kB
Mapped: 3072 kB
Shmem: 12480 kB
Slab: 16256 kB
SReclaimable: 768 kB
SUnreclaim: 15488 kB
KernelStack: 11648 kB
PageTables: 4096 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 2018048 kB
Committed_AS: 19328 kB
VmallocTotal: 4194304 kB
VmallocUsed: 224704 kB
VmallocChunk: 3964864 kB
Sequestered: 37184 kB
HugePages_Total: 256
HugePages_Free: 256
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 16384 kB
Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained
gxio_mpipe_init instance 0
gxio_mpipe_init instance 1
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 8 on socket 0
EAL: Detected lcore 9 as core 9 on socket 0
EAL: Detected lcore 10 as core 10 on socket 0
EAL: Detected lcore 11 as core 11 on socket 0
EAL: Detected lcore 12 as core 12 on socket 0
EAL: Detected lcore 13 as core 13 on socket 0
EAL: Detected lcore 14 as core 14 on socket 0
EAL: Detected lcore 15 as core 15 on socket 0
EAL: Detected lcore 16 as core 16 on socket 0
EAL: Detected lcore 17 as core 17 on socket 0
EAL: Detected lcore 18 as core 18 on socket 0
EAL: Detected lcore 19 as core 19 on socket 0
EAL: Detected lcore 20 as core 20 on socket 0
EAL: Detected lcore 21 as core 21 on socket 0
EAL: Detected lcore 22 as core 22 on socket 0
EAL: Detected lcore 23 as core 23 on socket 0
EAL: Detected lcore 24 as core 24 on socket 0
EAL: Detected lcore 25 as core 25 on socket 0
EAL: Detected lcore 26 as core 26 on socket 0
EAL: Detected lcore 27 as core 27 on socket 0
EAL: Detected lcore 28 as core 28 on socket 0
EAL: Detected lcore 29 as core 29 on socket 0
EAL: Detected lcore 30 as core 30 on socket 0
EAL: Detected lcore 31 as core 31 on socket 0
EAL: Detected lcore 32 as core 32 on socket 0
EAL: Detected lcore 33 as core 33 on socket 0
EAL: Detected lcore 34 as core 34 on socket 0
EAL: Detected lcore 35 as core 35 on socket 0
EAL: Support maximum 36 logical core(s) by configuration.
EAL: Detected 36 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0xc000000 bytes
EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000)
EAL: Ask a virtual area of 0xf4000000 bytes
EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000)
EAL: Requesting 128 pages of size 16MB from socket 0
EAL: TSC frequency is ~1199999 KHz
EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0])
PMD: mpipe init xgbe1
PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a).
EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1])
EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2])
EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3])
EAL: lcore 4 is ready (tid=e97af060;cpuset=[4])
EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5])
EAL: lcore 6 is ready (tid=e87af060;cpuset=[6])
EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7])
EAL: lcore 8 is ready (tid=dafff060;cpuset=[8])
EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9])
EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10])
EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11])
EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12])
EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14])
EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13])
EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15])
EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16])
EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17])
EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18])
EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19])
EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20])
EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21])
EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22])
EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23])
EAL: lcore 24 is ready (tid=8efff060;cpuset=[24])
EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25])
EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26])
EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27])
EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28])
EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29])
EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30])
EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31])
Set txonly packet forwarding mode
Auto-start selected
Configuring Port 0 (socket 0)
PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff
PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111.
PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f.
PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff.
PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff.
Port 0: EE:D1:53:72:82:5A
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
No commandline core given, start packet forwarding
txonly packet forwarding - CRC stripping disabled - packets/burst=32
packet len=64 - nb packet segments=1
nb forwarding cores=1 - nb forwarding ports=1
RX queues=1 - RX desc=128 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX queues=2 - TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX RS bit threshold=0 - TXQ flags=0x0
Press enter to exit
Regards,
Arthas
------------------ Original ------------------
From: "zlu";<zlu at ezchip.com>;
Date: Thu, Sep 24, 2015 09:47 AM
To: "Arthas"<kangzy1982 at qq.com>; "'dev'"<dev at dpdk.org>;
Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
Hi, Arthas
Seems like something wrong with memseg, could you try with
" --hvx hugepagesz=1G --hvx hugepages=4" to boot Gx card? This
helps reserve hugepages for DPDK, and check there are still such errors.
With regard to MDE-4.3.3, please contact your local tech support.
Thanks
-Zhigang
>-----Original Message-----
>From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Arthas
>Sent: Wednesday, September 23, 2015 11:56 PM
>To: zlu; dev
>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>Hi, ZhiGang,
> Can you tell me where can download TileraMDE-4.3.3 package? My tilegx
>tech supporter only send me TileraMDE-4.2.4 version!
>:)
>
>Thanks,
> Arthas
>
>
>
>
>------------------ Original ------------------
>From: "Arthas";<kangzy1982 at qq.com>;
>Date: Wed, Sep 23, 2015 06:41 PM
>To: "zlu"<zlu at ezchip.com>; "dev"<dev at dpdk.org>;
>
>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>
>
>Hi, ZhiGang
> I checked source code and debug it , found dpdk function rte_eth_tx_burst
>with tilegx return 0 and no other error. Can I contact you directly?
>Regards,
> Arthas
>
>
>
>------------------ Original ------------------
>From: "Arthas";<kangzy1982 at qq.com>;
>Date: Wed, Sep 23, 2015 06:35 PM
>To: "zlu"<zlu at ezchip.com>; "dev"<dev at dpdk.org>;
>
>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>
>
>Hi, ZhiGang
> My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir
>/tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64".
>and testpmd start parameter is
>tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run
>-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1
--tx=2
>--forward-mode=txonly -a --port-topology=chained -+-
>
> but xgbe1 can't xmit any packet.
>This is my run log:
>
>EAL: Detected lcore 0 as core 0 on socket 0
>EAL: Detected lcore 1 as core 1 on socket 0
>EAL: Detected lcore 2 as core 2 on socket 0
>EAL: Detected lcore 3 as core 3 on socket 0
>EAL: Detected lcore 4 as core 4 on socket 0
>EAL: Detected lcore 5 as core 5 on socket 0
>EAL: Detected lcore 6 as core 6 on socket 0
>EAL: Detected lcore 7 as core 7 on socket 0
>EAL: Detected lcore 8 as core 8 on socket 0
>EAL: Detected lcore 9 as core 9 on socket 0
>EAL: Detected lcore 10 as core 10 on socket 0
>EAL: Detected lcore 11 as core 11 on socket 0
>EAL: Detected lcore 12 as core 12 on socket 0
>EAL: Detected lcore 13 as core 13 on socket 0
>EAL: Detected lcore 14 as core 14 on socket 0
>EAL: Detected lcore 15 as core 15 on socket 0
>EAL: Detected lcore 16 as core 16 on socket 0
>EAL: Detected lcore 17 as core 17 on socket 0
>EAL: Detected lcore 18 as core 18 on socket 0
>EAL: Detected lcore 19 as core 19 on socket 0
>EAL: Detected lcore 20 as core 20 on socket 0
>EAL: Detected lcore 21 as core 21 on socket 0
>EAL: Detected lcore 22 as core 22 on socket 0
>EAL: Detected lcore 23 as core 23 on socket 0
>EAL: Detected lcore 24 as core 24 on socket 0
>EAL: Detected lcore 25 as core 25 on socket 0
>EAL: Detected lcore 26 as core 26 on socket 0
>EAL: Detected lcore 27 as core 27 on socket 0
>EAL: Detected lcore 28 as core 28 on socket 0
>EAL: Detected lcore 29 as core 29 on socket 0
>EAL: Detected lcore 30 as core 30 on socket 0
>EAL: Detected lcore 31 as core 31 on socket 0
>EAL: Detected lcore 32 as core 32 on socket 0
>EAL: Detected lcore 33 as core 33 on socket 0
>EAL: Detected lcore 34 as core 34 on socket 0
>EAL: Detected lcore 35 as core 35 on socket 0
>EAL: Support maximum 36 logical core(s) by configuration.
>EAL: Detected 36 lcore(s)
>EAL: No free hugepages reported in hugepages-1024kB
>EAL: Setting up physically contiguous memory...
>EAL: Ask a virtual area of 0x16000000 bytes
>EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000)
>EAL: Ask a virtual area of 0x90000000 bytes
>EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000)
>EAL: Ask a virtual area of 0x2000000 bytes
>EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000)
>EAL: Ask a virtual area of 0x10000000 bytes
>EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000)
>EAL: Ask a virtual area of 0x46000000 bytes
>EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000)
>EAL: Ask a virtual area of 0x2000000 bytes
>EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000)
>EAL: Requesting 128 pages of size 16MB from socket 0
>EAL: TSC frequency is ~1199999 KHz
>EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable
>clock cycles !
>EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0])
>PMD: mpipe init xgbe1
>PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a).
>EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1])
>EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2])
>EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3])
>EAL: lcore 4 is ready (tid=e984f060;cpuset=[4])
>EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5])
>EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6])
>EAL: lcore 7 is ready (tid=e904f060;cpuset=[7])
>EAL: lcore 8 is ready (tid=e884f060;cpuset=[8])
>EAL: lcore 9 is ready (tid=e804f060;cpuset=[9])
>EAL: lcore 10 is ready (tid=e784f060;cpuset=[10])
>EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11])
>EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12])
>EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13])
>EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14])
>EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15])
>EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16])
>EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17])
>EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18])
>EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19])
>EAL: lcore 20 is ready (tid=abfff060;cpuset=[20])
>EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21])
>EAL: lcore 22 is ready (tid=aafff060;cpuset=[22])
>EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23])
>EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24])
>EAL: lcore 25 is ready (tid=2efff060;cpuset=[25])
>EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26])
>EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27])
>EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28])
>EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29])
>EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30])
>EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31])
>Set txonly packet forwarding mode
>Auto-start selected
>Configuring Port 0 (socket 0)
>PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111.
>PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111.
>PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f.
>PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff.
>PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff.
>Port 0: EE:D1:53:72:82:5A
>Checking link statuses...
>Port 0 Link Up - speed 10000 Mbps - full-duplex
>Done
>No commandline core given, start packet forwarding
> txonly packet forwarding - CRC stripping disabled - packets/burst=32
> packet len=64 - nb packet segments=1
> nb forwarding cores=1 - nb forwarding ports=1
> RX queues=1 - RX desc=128 - RX free threshold=0
> RX threshold registers: pthresh=0 hthresh=0 wthresh=0
> TX queues=2 - TX desc=512 - TX free threshold=0
> TX threshold registers: pthresh=0 hthresh=0 wthresh=0
> TX RS bit threshold=0 - TXQ flags=0x0
>Press enter to exit
>
>
>and another tilegx card output:
>Command: run mpipe-stat xgbe1
>Link Tx pkt Tx bits Rx pkt Rx bits Tx err
>Rx err
>---------------------------------------------------------------------------
-----
>xgbe1 0 0 0 0
>0 0
>
>
>
>Regards, Arthas
>
>
>------------------ Original ------------------
>From: "zlu";<zlu at ezchip.com>;
>Date: Wed, Sep 23, 2015 03:34 PM
>To: "Arthas"<kangzy1982 at qq.com>; "'dev'"<dev at dpdk.org>;
>
>Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>
>
>Hi, Arthas
>
>Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx?
>
>>-----Original Message-----
>>From: Arthas [mailto:kangzy1982 at qq.com]
>>Sent: Wednesday, September 23, 2015 1:21 PM
>>To: dev
>>Cc: zlu
>>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>>
>>and I wrote a sample RX example, got an other information.
>>
>>
>>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111.
>>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111.
>>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111.
>>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111.
>>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111.
>>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111.
>>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f.
>>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff.
>>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff.
>>
>>
>>
>> Regards, Arthas
>>
>>------------------ Original ------------------
>>From: "Arthas";<kangzy1982 at qq.com>;
>>Date: Wed, Sep 23, 2015 01:17 PM
>>To: "dev"<dev at dpdk.org>;
>>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>>
>>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for
>tilegx.
>>But I got a error with rte_mbuf rte_pktmbuf_append.
>>
>>PANIC in rte_mbuf_sanity_check():
>>bad phys addr
>>7: [/trafgen(_start+0x70) [0x100b308]]
>>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]]
>>5: [/trafgen(main+0x2148) [0x1017b78]]
>>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]]
>>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]]
>>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]]
>>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]]
>>
>>
>>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y!
>>
>> Regards, Arthas
More information about the dev
mailing list