[dpdk-dev] [PATCH 1/8] drivers/common/dpaa2: Run time assembler for Descriptor formation
Akhil Goyal
akhil.goyal at nxp.com
Mon Dec 5 13:55:33 CET 2016
FLib is a library which helps in making the descriptors which
is understood by NXP's SEC hardware.
This patch provides header files for command words which can be used
for descritptor formation.
Signed-off-by: Horia Geanta Neag <horia.geanta at nxp.com>
Acked-by: Akhil Goyal <akhil.goyal at nxp.com>
---
drivers/common/dpaa2/flib/README | 43 +
drivers/common/dpaa2/flib/compat.h | 186 +++++
drivers/common/dpaa2/flib/rta.h | 918 +++++++++++++++++++++
.../common/dpaa2/flib/rta/fifo_load_store_cmd.h | 308 +++++++
drivers/common/dpaa2/flib/rta/header_cmd.h | 213 +++++
drivers/common/dpaa2/flib/rta/jump_cmd.h | 172 ++++
drivers/common/dpaa2/flib/rta/key_cmd.h | 187 +++++
drivers/common/dpaa2/flib/rta/load_cmd.h | 301 +++++++
drivers/common/dpaa2/flib/rta/math_cmd.h | 366 ++++++++
drivers/common/dpaa2/flib/rta/move_cmd.h | 405 +++++++++
drivers/common/dpaa2/flib/rta/nfifo_cmd.h | 161 ++++
drivers/common/dpaa2/flib/rta/operation_cmd.h | 549 ++++++++++++
drivers/common/dpaa2/flib/rta/protocol_cmd.h | 680 +++++++++++++++
drivers/common/dpaa2/flib/rta/sec_run_time_asm.h | 767 +++++++++++++++++
drivers/common/dpaa2/flib/rta/seq_in_out_ptr_cmd.h | 172 ++++
drivers/common/dpaa2/flib/rta/signature_cmd.h | 40 +
drivers/common/dpaa2/flib/rta/store_cmd.h | 149 ++++
17 files changed, 5617 insertions(+)
create mode 100644 drivers/common/dpaa2/flib/README
create mode 100644 drivers/common/dpaa2/flib/compat.h
create mode 100644 drivers/common/dpaa2/flib/rta.h
create mode 100644 drivers/common/dpaa2/flib/rta/fifo_load_store_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/header_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/jump_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/key_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/load_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/math_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/move_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/nfifo_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/operation_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/protocol_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/sec_run_time_asm.h
create mode 100644 drivers/common/dpaa2/flib/rta/seq_in_out_ptr_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/signature_cmd.h
create mode 100644 drivers/common/dpaa2/flib/rta/store_cmd.h
diff --git a/drivers/common/dpaa2/flib/README b/drivers/common/dpaa2/flib/README
new file mode 100644
index 0000000..a8b3358
--- /dev/null
+++ b/drivers/common/dpaa2/flib/README
@@ -0,0 +1,43 @@
+Copyright 2008-2013 Freescale Semiconductor, Inc.
+
+Runtime Assembler provides an easy and flexible runtime method for writing
+SEC descriptors.
+
+1. What's supported
+===================
+1.1 Initialization/verification code for descriptor buffer.
+1.2 Configuration/verification code for SEC commands:
+ FIFOLOAD and SEQFIFOLOAD;
+ FIFOSTORE and SEQFIFOSTORE;
+ SHARED HEADER and JOB HEADER;
+ JUMP;
+ KEY;
+ LOAD and SEQLOAD;
+ MATH;
+ MOVE and MOVELEN;
+ NFIFO - pseudo command (shortcut for writing FIFO entries using LOAD command);
+ PKA OPERATION and ALGORITHM OPERATION;
+ PROTOCOL;
+ SEQ IN PTR and SEQ OUT PTR;
+ SIGNATURE;
+ STORE and SEQSTORE.
+1.3 Support for referential code:
+ patching routines for LOAD, MOVE, JUMP and HEADER commands.
+ raw patching (i.e. patch any 4-byte word from descriptor)
+1.4 Support for extended (32/36/40-bit) pointer size.
+1.5 SEC Eras 1-6
+ Below is a non-exhaustive list of platforms:
+ Era 1 - P4080R1
+ Era 2 - P4080R2
+ Era 3 - P1010, P1023, P3041, P5020
+ Era 4 - BSC9131, BSC9132, P4080R3
+ Era 5 - P5040, B4860, T4240R1
+ Era 6 - C290, T4240R2, T1040, T2080
+
+2. What's not supported
+=======================
+2.1 SEC Eras 7 and 8.
+
+3. Integration
+==============
+To integrate this tool into your project, rta.h file must be included.
diff --git a/drivers/common/dpaa2/flib/compat.h b/drivers/common/dpaa2/flib/compat.h
new file mode 100644
index 0000000..bd946e1
--- /dev/null
+++ b/drivers/common/dpaa2/flib/compat.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_COMPAT_H__
+#define __RTA_COMPAT_H__
+
+#include <stdint.h>
+#include <errno.h>
+
+#ifdef __GLIBC__
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <byteswap.h>
+
+#ifndef __BYTE_ORDER__
+#error "Undefined endianness"
+#endif
+
+/* FSL's Embedded Warrior C Library; assume AIOP or MC environment */
+#elif defined(__EWL__) && (defined(AIOP) || defined(MC))
+#include "common/fsl_string.h"
+#include "common/fsl_stdlib.h"
+#include "common/fsl_stdio.h"
+#if defined(AIOP)
+#include "dplib/fsl_cdma.h"
+#endif
+#include "fsl_dbg.h"
+#include "fsl_endian.h"
+#if _EWL_C99
+#include <stdbool.h>
+#else
+#if !__option(c99)
+typedef unsigned char _Bool;
+#endif
+#define bool _Bool
+#define true 1
+#define false 0
+#define __bool_true_false_are_defined 1
+#endif /* _EWL_C99 */
+#else
+#error Environment not supported!
+#endif
+
+#ifndef __always_inline
+#define __always_inline inline __attribute__((always_inline))
+#endif
+
+#ifndef __always_unused
+#define __always_unused __attribute__((unused))
+#endif
+
+#ifndef __maybe_unused
+#define __maybe_unused __attribute__((unused))
+#endif
+
+#if defined(__GLIBC__) && (defined(SUPPRESS_PRINTS) || \
+ (!defined(pr_debug) && !defined(RTA_DEBUG)))
+#ifndef __printf
+#define __printf(a, b) __attribute__((format(printf, 1, 2)))
+#endif
+static inline __printf(1, 2) int no_printf(const char *fmt __always_unused, ...)
+{
+ return 0;
+}
+#endif
+
+#if defined(__GLIBC__) && !defined(pr_debug)
+#if !defined(SUPPRESS_PRINTS) && defined(RTA_DEBUG)
+#define pr_debug(fmt, ...) printf(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) no_printf(fmt, ##__VA_ARGS__)
+#endif
+#endif /* pr_debug */
+
+#if defined(__GLIBC__) && !defined(pr_err)
+#if !defined(SUPPRESS_PRINTS)
+#define pr_err(fmt, ...) printf(fmt, ##__VA_ARGS__)
+#else
+#define pr_err(fmt, ...) no_printf(fmt, ##__VA_ARGS__)
+#endif
+#endif /* pr_err */
+
+#if defined(__GLIBC__) && !defined(pr_warning)
+#if !defined(SUPPRESS_PRINTS)
+#define pr_warning(fmt, ...) printf(fmt, ##__VA_ARGS__)
+#else
+#define pr_warning(fmt, ...) no_printf(fmt, ##__VA_ARGS__)
+#endif
+#endif /* pr_warning */
+
+#if defined(__GLIBC__) && !defined(pr_warn)
+#define pr_warn pr_warning
+#endif /* pr_warn */
+
+/**
+ * ARRAY_SIZE - returns the number of elements in an array
+ * @x: array
+ */
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+#ifndef ALIGN
+#define ALIGN(x, a) (((x) + ((__typeof__(x))(a) - 1)) & \
+ ~((__typeof__(x))(a) - 1))
+#endif
+
+#ifndef BIT
+#define BIT(nr) (1UL << (nr))
+#endif
+
+#ifndef upper_32_bits
+/**
+ * upper_32_bits - return bits 32-63 of a number
+ * @n: the number we're accessing
+ */
+#define upper_32_bits(n) ((uint32_t)(((n) >> 16) >> 16))
+#endif
+
+#ifndef lower_32_bits
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((uint32_t)(n))
+#endif
+
+/* Use Linux naming convention */
+#ifdef __GLIBC__
+ #define swab16(x) bswap_16(x)
+ #define swab32(x) bswap_32(x)
+ #define swab64(x) bswap_64(x)
+ /* Define cpu_to_be32 macro if not defined in the build environment */
+ #if !defined(cpu_to_be32)
+ #if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ #define cpu_to_be32(x) (x)
+ #else
+ #define cpu_to_be32(x) swab32(x)
+ #endif
+ #endif
+ /* Define cpu_to_le32 macro if not defined in the build environment */
+ #if !defined(cpu_to_le32)
+ #if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ #define cpu_to_le32(x) swab32(x)
+ #else
+ #define cpu_to_le32(x) (x)
+ #endif
+ #endif
+#elif defined(__EWL__) && (defined(AIOP) || defined(MC))
+ #define swab16(x) swap_uint16(x)
+ #define swab32(x) swap_uint32(x)
+ #define swab64(x) swap_uint64(x)
+ #define cpu_to_be32(x) CPU_TO_BE32(x)
+ #define cpu_to_le32(x) CPU_TO_LE32(x)
+ /* Define endianness macros if not defined by the compiler */
+ #ifndef __BIG_ENDIAN
+ #define __BIG_ENDIAN 0x10e1
+ #endif
+ #ifndef __ORDER_BIG_ENDIAN__
+ #define __ORDER_BIG_ENDIAN__ __BIG_ENDIAN
+ #endif
+ #ifndef __LITTLE_ENDIAN
+ #define __LITTLE_ENDIAN 0xe110
+ #endif
+ #ifndef __ORDER_LITTLE_ENDIAN__
+ #define __ORDER_LITTLE_ENDIAN__ __LITTLE_ENDIAN
+ #endif
+ #ifdef CORE_IS_BIG_ENDIAN
+ #ifndef __BYTE_ORDER__
+ #define __BYTE_ORDER__ __ORDER_BIG_ENDIAN__
+ #endif
+ #elif defined(CORE_IS_LITTLE_ENDIAN)
+ #ifndef __BYTE_ORDER__
+ #define __BYTE_ORDER__ __ORDER_LITTLE_ENDIAN__
+ #endif
+ #else
+ #error Endianness not set in environment!
+ #endif /* CORE_IS_BIG_ENDIAN */
+#endif
+
+#endif /* __RTA_COMPAT_H__ */
diff --git a/drivers/common/dpaa2/flib/rta.h b/drivers/common/dpaa2/flib/rta.h
new file mode 100644
index 0000000..aee7aeb
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta.h
@@ -0,0 +1,918 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_RTA_H__
+#define __RTA_RTA_H__
+
+#include "rta/sec_run_time_asm.h"
+#include "rta/fifo_load_store_cmd.h"
+#include "rta/header_cmd.h"
+#include "rta/jump_cmd.h"
+#include "rta/key_cmd.h"
+#include "rta/load_cmd.h"
+#include "rta/math_cmd.h"
+#include "rta/move_cmd.h"
+#include "rta/nfifo_cmd.h"
+#include "rta/operation_cmd.h"
+#include "rta/protocol_cmd.h"
+#include "rta/seq_in_out_ptr_cmd.h"
+#include "rta/signature_cmd.h"
+#include "rta/store_cmd.h"
+
+/**
+ * DOC: About
+ *
+ * RTA (Runtime Assembler) Library is an easy and flexible runtime method for
+ * writing SEC descriptors. It implements a thin abstraction layer above
+ * SEC commands set; the resulting code is compact and similar to a
+ * descriptor sequence.
+ *
+ * RTA library improves comprehension of the SEC code, adds flexibility for
+ * writing complex descriptors and keeps the code lightweight. Should be used
+ * by whom needs to encode descriptors at runtime, with comprehensible flow
+ * control in descriptor.
+ */
+
+/**
+ * DOC: Usage
+ *
+ * RTA is used in kernel space by the SEC / CAAM (Cryptographic Acceleration and
+ * Assurance Module) kernel module (drivers/crypto/caam) and SEC / CAAM QI
+ * kernel module (Freescale QorIQ SDK).
+ *
+ * RTA is used in user space by USDPAA - User Space DataPath Acceleration
+ * Architecture (Freescale QorIQ SDK).
+ */
+
+/**
+ * DOC: Descriptor Buffer Management Routines
+ *
+ * Contains details of RTA descriptor buffer management and SEC Era
+ * management routines.
+ */
+
+/**
+ * PROGRAM_CNTXT_INIT - must be called before any descriptor run-time assembly
+ * call type field carry info i.e. whether descriptor is
+ * shared or job descriptor.
+ * @program: pointer to struct program
+ * @buffer: input buffer where the descriptor will be placed (uint32_t *)
+ * @offset: offset in input buffer from where the data will be written
+ * (unsigned)
+ */
+#define PROGRAM_CNTXT_INIT(program, buffer, offset) \
+ rta_program_cntxt_init(program, buffer, offset)
+
+/**
+ * PROGRAM_FINALIZE - must be called to mark completion of RTA call.
+ * @program: pointer to struct program
+ *
+ * Return: total size of the descriptor in words or negative number on error.
+ */
+#define PROGRAM_FINALIZE(program) rta_program_finalize(program)
+
+/**
+ * PROGRAM_SET_36BIT_ADDR - must be called to set pointer size to 36 bits
+ * @program: pointer to struct program
+ *
+ * Return: current size of the descriptor in words (unsigned).
+ */
+#define PROGRAM_SET_36BIT_ADDR(program) rta_program_set_36bit_addr(program)
+
+/**
+ * PROGRAM_SET_BSWAP - must be called to enable byte swapping
+ * @program: pointer to struct program
+ *
+ * Byte swapping on a 4-byte boundary will be performed at the end - when
+ * calling PROGRAM_FINALIZE().
+ *
+ * Return: current size of the descriptor in words (unsigned).
+ */
+#define PROGRAM_SET_BSWAP(program) rta_program_set_bswap(program)
+
+/**
+ * WORD - must be called to insert in descriptor buffer a 32bit value
+ * @program: pointer to struct program
+ * @val: input value to be written in descriptor buffer (uint32_t)
+ *
+ * Return: the descriptor buffer offset where this command is inserted
+ * (unsigned).
+ */
+#define WORD(program, val) rta_word(program, val)
+
+/**
+ * DWORD - must be called to insert in descriptor buffer a 64bit value
+ * @program: pointer to struct program
+ * @val: input value to be written in descriptor buffer (uint64_t)
+ *
+ * Return: the descriptor buffer offset where this command is inserted
+ * (unsigned).
+ */
+#define DWORD(program, val) rta_dword(program, val)
+
+/**
+ * COPY_DATA - must be called to insert in descriptor buffer data larger than
+ * 64bits.
+ * @program: pointer to struct program
+ * @data: input data to be written in descriptor buffer (uint8_t *)
+ * @len: length of input data (unsigned)
+ *
+ * Return: the descriptor buffer offset where this command is inserted
+ * (unsigned).
+ */
+#define COPY_DATA(program, data, len) rta_copy_data(program, (data), (len))
+
+/**
+ * DESC_LEN - determines job / shared descriptor buffer length (in words)
+ * @buffer: descriptor buffer (uint32_t *)
+ *
+ * Return: descriptor buffer length in words (unsigned).
+ */
+#define DESC_LEN(buffer) rta_desc_len(buffer)
+
+/**
+ * DESC_BYTES - determines job / shared descriptor buffer length (in bytes)
+ * @buffer: descriptor buffer (uint32_t *)
+ *
+ * Return: descriptor buffer length in bytes (unsigned).
+ */
+#define DESC_BYTES(buffer) rta_desc_bytes(buffer)
+
+/*
+ * SEC HW block revision.
+ *
+ * This *must not be confused with SEC version*:
+ * - SEC HW block revision format is "v"
+ * - SEC revision format is "x.y"
+ */
+extern enum rta_sec_era rta_sec_era;
+
+/**
+ * rta_set_sec_era - Set SEC Era HW block revision for which the RTA library
+ * will generate the descriptors.
+ * @era: SEC Era (enum rta_sec_era)
+ *
+ * Return: 0 if the ERA was set successfully, -1 otherwise (int)
+ *
+ * Warning 1: Must be called *only once*, *before* using any other RTA API
+ * routine.
+ *
+ * Warning 2: *Not thread safe*.
+ */
+static inline int rta_set_sec_era(enum rta_sec_era era)
+{
+ if (era > MAX_SEC_ERA) {
+ rta_sec_era = DEFAULT_SEC_ERA;
+ pr_err("Unsupported SEC ERA. Defaulting to ERA %d\n",
+ DEFAULT_SEC_ERA + 1);
+ return -1;
+ }
+
+ rta_sec_era = era;
+ return 0;
+}
+
+/**
+ * rta_get_sec_era - Get SEC Era HW block revision for which the RTA library
+ * will generate the descriptors.
+ *
+ * Return: SEC Era (unsigned).
+ */
+static inline unsigned rta_get_sec_era(void)
+{
+ return rta_sec_era;
+}
+
+/**
+ * DOC: SEC Commands Routines
+ *
+ * Contains details of RTA wrapper routines over SEC engine commands.
+ */
+
+/**
+ * SHR_HDR - Configures Shared Descriptor HEADER command
+ * @program: pointer to struct program
+ * @share: descriptor share state (enum rta_share_type)
+ * @start_idx: index in descriptor buffer where the execution of the shared
+ * descriptor should start (@c unsigned).
+ * @flags: operational flags: RIF, DNR, CIF, SC, PD
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SHR_HDR(program, share, start_idx, flags) \
+ rta_shr_header(program, share, start_idx, flags)
+
+/**
+ * JOB_HDR - Configures JOB Descriptor HEADER command
+ * @program: pointer to struct program
+ * @share: descriptor share state (enum rta_share_type)
+ * @start_idx: index in descriptor buffer where the execution of the job
+ * descriptor should start (unsigned). In case SHR bit is present
+ * in flags, this will be the shared descriptor length.
+ * @share_desc: pointer to shared descriptor, in case SHR bit is set (uint64_t)
+ * @flags: operational flags: RSMS, DNR, TD, MTD, REO, SHR
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JOB_HDR(program, share, start_idx, share_desc, flags) \
+ rta_job_header(program, share, start_idx, share_desc, flags, 0)
+
+/**
+ * JOB_HDR_EXT - Configures JOB Descriptor HEADER command
+ * @program: pointer to struct program
+ * @share: descriptor share state (enum rta_share_type)
+ * @start_idx: index in descriptor buffer where the execution of the job
+ * descriptor should start (unsigned). In case SHR bit is present
+ * in flags, this will be the shared descriptor length.
+ * @share_desc: pointer to shared descriptor, in case SHR bit is set (uint64_t)
+ * @flags: operational flags: RSMS, DNR, TD, MTD, REO, SHR
+ * @ext_flags: extended header flags: DSV (DECO Select Valid), DECO Id (limited
+ * by DSEL_MASK).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JOB_HDR_EXT(program, share, start_idx, share_desc, flags, ext_flags) \
+ rta_job_header(program, share, start_idx, share_desc, flags | EXT, \
+ ext_flags)
+
+/**
+ * MOVE - Configures MOVE and MOVE_LEN commands
+ * @program: pointer to struct program
+ * @src: internal source of data that will be moved: CONTEXT1, CONTEXT2, OFIFO,
+ * DESCBUF, MATH0-MATH3, IFIFOABD, IFIFOAB1, IFIFOAB2, AB1, AB2, ABD.
+ * @src_offset: offset in source data (uint16_t)
+ * @dst: internal destination of data that will be moved: CONTEXT1, CONTEXT2,
+ * OFIFO, DESCBUF, MATH0-MATH3, IFIFOAB1, IFIFOAB2, IFIFO, PKA, KEY1,
+ * KEY2, ALTSOURCE.
+ * @dst_offset: offset in destination data (uint16_t)
+ * @length: size of data to be moved: for MOVE must be specified as immediate
+ * value and IMMED flag must be set; for MOVE_LEN must be specified
+ * using MATH0-MATH3.
+ * @opt: operational flags: WAITCOMP, FLUSH1, FLUSH2, LAST1, LAST2, SIZE_WORD,
+ * SIZE_BYTE, SIZE_DWORD, IMMED (not valid for MOVE_LEN).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MOVE(program, src, src_offset, dst, dst_offset, length, opt) \
+ rta_move(program, __MOVE, src, src_offset, dst, dst_offset, length, opt)
+
+/**
+ * MOVEB - Configures MOVEB command
+ * @program: pointer to struct program
+ * @src: internal source of data that will be moved: CONTEXT1, CONTEXT2, OFIFO,
+ * DESCBUF, MATH0-MATH3, IFIFOABD, IFIFOAB1, IFIFOAB2, AB1, AB2, ABD.
+ * @src_offset: offset in source data (uint16_t)
+ * @dst: internal destination of data that will be moved: CONTEXT1, CONTEXT2,
+ * OFIFO, DESCBUF, MATH0-MATH3, IFIFOAB1, IFIFOAB2, IFIFO, PKA, KEY1,
+ * KEY2, ALTSOURCE.
+ * @dst_offset: offset in destination data (uint16_t)
+ * @length: size of data to be moved: for MOVE must be specified as immediate
+ * value and IMMED flag must be set; for MOVE_LEN must be specified
+ * using MATH0-MATH3.
+ * @opt: operational flags: WAITCOMP, FLUSH1, FLUSH2, LAST1, LAST2, SIZE_WORD,
+ * SIZE_BYTE, SIZE_DWORD, IMMED (not valid for MOVE_LEN).
+ *
+ * Identical with MOVE command if byte swapping not enabled; else - when src/dst
+ * is descriptor buffer or MATH registers, data type is byte array when MOVE
+ * data type is 4-byte array and vice versa.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MOVEB(program, src, src_offset, dst, dst_offset, length, opt) \
+ rta_move(program, __MOVEB, src, src_offset, dst, dst_offset, length, \
+ opt)
+
+/**
+ * MOVEDW - Configures MOVEDW command
+ * @program: pointer to struct program
+ * @src: internal source of data that will be moved: CONTEXT1, CONTEXT2, OFIFO,
+ * DESCBUF, MATH0-MATH3, IFIFOABD, IFIFOAB1, IFIFOAB2, AB1, AB2, ABD.
+ * @src_offset: offset in source data (uint16_t)
+ * @dst: internal destination of data that will be moved: CONTEXT1, CONTEXT2,
+ * OFIFO, DESCBUF, MATH0-MATH3, IFIFOAB1, IFIFOAB2, IFIFO, PKA, KEY1,
+ * KEY2, ALTSOURCE.
+ * @dst_offset: offset in destination data (uint16_t)
+ * @length: size of data to be moved: for MOVE must be specified as immediate
+ * value and IMMED flag must be set; for MOVE_LEN must be specified
+ * using MATH0-MATH3.
+ * @opt: operational flags: WAITCOMP, FLUSH1, FLUSH2, LAST1, LAST2, SIZE_WORD,
+ * SIZE_BYTE, SIZE_DWORD, IMMED (not valid for MOVE_LEN).
+ *
+ * Identical with MOVE command, with the following differences: data type is
+ * 8-byte array; word swapping is performed when SEC is programmed in little
+ * endian mode.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MOVEDW(program, src, src_offset, dst, dst_offset, length, opt) \
+ rta_move(program, __MOVEDW, src, src_offset, dst, dst_offset, length, \
+ opt)
+
+/**
+ * FIFOLOAD - Configures FIFOLOAD command to load message data, PKHA data, IV,
+ * ICV, AAD and bit length message data into Input Data FIFO.
+ * @program: pointer to struct program
+ * @data: input data type to store: PKHA registers, IFIFO, MSG1, MSG2,
+ * MSGOUTSNOOP, MSGINSNOOP, IV1, IV2, AAD1, ICV1, ICV2, BIT_DATA, SKIP.
+ * @src: pointer or actual data in case of immediate load; IMMED, COPY and DCOPY
+ * flags indicate action taken (inline imm data, inline ptr, inline from
+ * ptr).
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: SGF, IMMED, EXT, CLASS1, CLASS2, BOTH, FLUSH1,
+ * LAST1, LAST2, COPY, DCOPY.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define FIFOLOAD(program, data, src, length, flags) \
+ rta_fifo_load(program, data, src, length, flags)
+
+/**
+ * SEQFIFOLOAD - Configures SEQ FIFOLOAD command to load message data, PKHA
+ * data, IV, ICV, AAD and bit length message data into Input Data
+ * FIFO.
+ * @program: pointer to struct program
+ * @data: input data type to store: PKHA registers, IFIFO, MSG1, MSG2,
+ * MSGOUTSNOOP, MSGINSNOOP, IV1, IV2, AAD1, ICV1, ICV2, BIT_DATA, SKIP.
+ * @length: number of bytes to load; can be set to 0 for SEQ command w/ VLF set
+ * (uint32_t).
+ * @flags: operational flags: VLF, CLASS1, CLASS2, BOTH, FLUSH1, LAST1, LAST2,
+ * AIDF.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQFIFOLOAD(program, data, length, flags) \
+ rta_fifo_load(program, data, NONE, length, flags|SEQ)
+
+/**
+ * FIFOSTORE - Configures FIFOSTORE command, to move data from Output Data FIFO
+ * to external memory via DMA.
+ * @program: pointer to struct program
+ * @data: output data type to store: PKHA registers, IFIFO, OFIFO, RNG,
+ * RNGOFIFO, AFHA_SBOX, MDHA_SPLIT_KEY, MSG, KEY1, KEY2, SKIP.
+ * @encrypt_flags: store data encryption mode: EKT, TK
+ * @dst: pointer to store location (uint64_t)
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: SGF, CONT, EXT, CLASS1, CLASS2, BOTH
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define FIFOSTORE(program, data, encrypt_flags, dst, length, flags) \
+ rta_fifo_store(program, data, encrypt_flags, dst, length, flags)
+
+/**
+ * SEQFIFOSTORE - Configures SEQ FIFOSTORE command, to move data from Output
+ * Data FIFO to external memory via DMA.
+ * @program: pointer to struct program
+ * @data: output data type to store: PKHA registers, IFIFO, OFIFO, RNG,
+ * RNGOFIFO, AFHA_SBOX, MDHA_SPLIT_KEY, MSG, KEY1, KEY2, METADATA, SKIP.
+ * @encrypt_flags: store data encryption mode: EKT, TK
+ * @length: number of bytes to load; can be set to 0 for SEQ command w/ VLF set
+ * (uint32_t).
+ * @flags: operational flags: VLF, CONT, EXT, CLASS1, CLASS2, BOTH
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQFIFOSTORE(program, data, encrypt_flags, length, flags) \
+ rta_fifo_store(program, data, encrypt_flags, 0, length, flags|SEQ)
+
+/**
+ * KEY - Configures KEY and SEQ KEY commands
+ * @program: pointer to struct program
+ * @key_dst: key store location: KEY1, KEY2, PKE, AFHA_SBOX, MDHA_SPLIT_KEY
+ * @encrypt_flags: key encryption mode: ENC, EKT, TK, NWB, PTS
+ * @src: pointer or actual data in case of immediate load (uint64_t); IMMED,
+ * COPY and DCOPY flags indicate action taken (inline imm data,
+ * inline ptr, inline from ptr).
+ * @length: number of bytes to load; can be set to 0 for SEQ command w/ VLF set
+ * (uint32_t).
+ * @flags: operational flags: for KEY: SGF, IMMED, COPY, DCOPY; for SEQKEY: SEQ,
+ * VLF, AIDF.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define KEY(program, key_dst, encrypt_flags, src, length, flags) \
+ rta_key(program, key_dst, encrypt_flags, src, length, flags)
+
+/**
+ * SEQINPTR - Configures SEQ IN PTR command
+ * @program: pointer to struct program
+ * @src: starting address for Input Sequence (uint64_t)
+ * @length: number of bytes in (or to be added to) Input Sequence (uint32_t)
+ * @flags: operational flags: RBS, INL, SGF, PRE, EXT, RTO, RJD, SOP (when PRE,
+ * RTO or SOP are set, @src parameter must be 0).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQINPTR(program, src, length, flags) \
+ rta_seq_in_ptr(program, src, length, flags)
+
+/**
+ * SEQOUTPTR - Configures SEQ OUT PTR command
+ * @program: pointer to struct program
+ * @dst: starting address for Output Sequence (uint64_t)
+ * @length: number of bytes in (or to be added to) Output Sequence (uint32_t)
+ * @flags: operational flags: SGF, PRE, EXT, RTO, RST, EWS (when PRE or RTO are
+ * set, @dst parameter must be 0).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQOUTPTR(program, dst, length, flags) \
+ rta_seq_out_ptr(program, dst, length, flags)
+
+/**
+ * ALG_OPERATION - Configures ALGORITHM OPERATION command
+ * @program: pointer to struct program
+ * @cipher_alg: algorithm to be used
+ * @aai: Additional Algorithm Information; contains mode information that is
+ * associated with the algorithm (check desc.h for specific values).
+ * @algo_state: algorithm state; defines the state of the algorithm that is
+ * being executed (check desc.h file for specific values).
+ * @icv_check: ICV checking; selects whether the algorithm should check
+ * calculated ICV with known ICV: ICV_CHECK_ENABLE,
+ * ICV_CHECK_DISABLE.
+ * @enc: selects between encryption and decryption: DIR_ENC, DIR_DEC
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define ALG_OPERATION(program, cipher_alg, aai, algo_state, icv_check, enc) \
+ rta_operation(program, cipher_alg, aai, algo_state, icv_check, enc)
+
+/**
+ * PROTOCOL - Configures PROTOCOL OPERATION command
+ * @program: pointer to struct program
+ * @optype: operation type: OP_TYPE_UNI_PROTOCOL / OP_TYPE_DECAP_PROTOCOL /
+ * OP_TYPE_ENCAP_PROTOCOL.
+ * @protid: protocol identifier value (check desc.h file for specific values)
+ * @protoinfo: protocol dependent value (check desc.h file for specific values)
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define PROTOCOL(program, optype, protid, protoinfo) \
+ rta_proto_operation(program, optype, protid, protoinfo)
+
+/**
+ * DKP_PROTOCOL - Configures DKP (Derived Key Protocol) PROTOCOL command
+ * @program: pointer to struct program
+ * @protid: protocol identifier value - one of the following:
+ * OP_PCLID_DKP_{MD5 | SHA1 | SHA224 | SHA256 | SHA384 | SHA512}
+ * @key_src: How the initial ("negotiated") key is provided to the DKP protocol.
+ * Valid values - one of OP_PCL_DKP_SRC_{IMM, SEQ, PTR, SGF}. Not all
+ * (key_src,key_dst) combinations are allowed.
+ * @key_dst: How the derived ("split") key is returned by the DKP protocol.
+ * Valid values - one of OP_PCL_DKP_DST_{IMM, SEQ, PTR, SGF}. Not all
+ * (key_src,key_dst) combinations are allowed.
+ * @keylen: length of the initial key, in bytes (uint16_t)
+ * @key: address where algorithm key resides; virtual address if key_type is
+ * RTA_DATA_IMM, physical (bus) address if key_type is RTA_DATA_PTR or
+ * RTA_DATA_IMM_DMA.
+ * @key_type: enum rta_data_type
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define DKP_PROTOCOL(program, protid, key_src, key_dst, keylen, key, key_type) \
+ rta_dkp_proto(program, protid, key_src, key_dst, keylen, key, key_type)
+
+/**
+ * PKHA_OPERATION - Configures PKHA OPERATION command
+ * @program: pointer to struct program
+ * @op_pkha: PKHA operation; indicates the modular arithmetic function to
+ * execute (check desc.h file for specific values).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define PKHA_OPERATION(program, op_pkha) rta_pkha_operation(program, op_pkha)
+
+/**
+ * JUMP - Configures JUMP command
+ * @program: pointer to struct program
+ * @addr: local offset for local jumps or address pointer for non-local jumps;
+ * IMM or PTR macros must be used to indicate type.
+ * @jump_type: type of action taken by jump (enum rta_jump_type)
+ * @test_type: defines how jump conditions are evaluated (enum rta_jump_cond)
+ * @cond: jump conditions: operational flags - DONE1, DONE2, BOTH; various
+ * sharing and wait conditions (JSL = 1) - NIFP, NIP, NOP, NCP, CALM,
+ * SELF, SHARED, JQP; Math and PKHA status conditions (JSL = 0) - Z, N,
+ * NV, C, PK0, PK1, PKP.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JUMP(program, addr, jump_type, test_type, cond) \
+ rta_jump(program, addr, jump_type, test_type, cond, NONE)
+
+/**
+ * JUMP_INC - Configures JUMP_INC command
+ * @program: pointer to struct program
+ * @addr: local offset; IMM or PTR macros must be used to indicate type
+ * @test_type: defines how jump conditions are evaluated (enum rta_jump_cond)
+ * @cond: jump conditions: Math status conditions (JSL = 0): Z, N, NV, C
+ * @src_dst: register to increment / decrement: MATH0-MATH3, DPOVRD, SEQINSZ,
+ * SEQOUTSZ, VSEQINSZ, VSEQOUTSZ.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JUMP_INC(program, addr, test_type, cond, src_dst) \
+ rta_jump(program, addr, LOCAL_JUMP_INC, test_type, cond, src_dst)
+
+/**
+ * JUMP_DEC - Configures JUMP_DEC command
+ * @program: pointer to struct program
+ * @addr: local offset; IMM or PTR macros must be used to indicate type
+ * @test_type: defines how jump conditions are evaluated (enum rta_jump_cond)
+ * @cond: jump conditions: Math status conditions (JSL = 0): Z, N, NV, C
+ * @src_dst: register to increment / decrement: MATH0-MATH3, DPOVRD, SEQINSZ,
+ * SEQOUTSZ, VSEQINSZ, VSEQOUTSZ.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JUMP_DEC(program, addr, test_type, cond, src_dst) \
+ rta_jump(program, addr, LOCAL_JUMP_DEC, test_type, cond, src_dst)
+
+/**
+ * LOAD - Configures LOAD command to load data registers from descriptor or from
+ * a memory location.
+ * @program: pointer to struct program
+ * @addr: immediate value or pointer to the data to be loaded; IMMED, COPY and
+ * DCOPY flags indicate action taken (inline imm data, inline ptr, inline
+ * from ptr).
+ * @dst: destination register (uint64_t)
+ * @offset: start point to write data in destination register (uint32_t)
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: VLF, IMMED, COPY, DCOPY
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define LOAD(program, addr, dst, offset, length, flags) \
+ rta_load(program, addr, dst, offset, length, flags)
+
+/**
+ * SEQLOAD - Configures SEQ LOAD command to load data registers from descriptor
+ * or from a memory location.
+ * @program: pointer to struct program
+ * @dst: destination register (uint64_t)
+ * @offset: start point to write data in destination register (uint32_t)
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: SGF
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQLOAD(program, dst, offset, length, flags) \
+ rta_load(program, NONE, dst, offset, length, flags|SEQ)
+
+/**
+ * STORE - Configures STORE command to read data from registers and write them
+ * to a memory location.
+ * @program: pointer to struct program
+ * @src: immediate value or source register for data to be stored: KEY1SZ,
+ * KEY2SZ, DJQDA, MODE1, MODE2, DJQCTRL, DATA1SZ, DATA2SZ, DSTAT, ICV1SZ,
+ * ICV2SZ, DPID, CCTRL, ICTRL, CLRW, CSTAT, MATH0-MATH3, PKHA registers,
+ * CONTEXT1, CONTEXT2, DESCBUF, JOBDESCBUF, SHAREDESCBUF. In case of
+ * immediate value, IMMED, COPY and DCOPY flags indicate action taken
+ * (inline imm data, inline ptr, inline from ptr).
+ * @offset: start point for reading from source register (uint16_t)
+ * @dst: pointer to store location (uint64_t)
+ * @length: number of bytes to store (uint32_t)
+ * @flags: operational flags: VLF, IMMED, COPY, DCOPY
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define STORE(program, src, offset, dst, length, flags) \
+ rta_store(program, src, offset, dst, length, flags)
+
+/**
+ * SEQSTORE - Configures SEQ STORE command to read data from registers and write
+ * them to a memory location.
+ * @program: pointer to struct program
+ * @src: immediate value or source register for data to be stored: KEY1SZ,
+ * KEY2SZ, DJQDA, MODE1, MODE2, DJQCTRL, DATA1SZ, DATA2SZ, DSTAT, ICV1SZ,
+ * ICV2SZ, DPID, CCTRL, ICTRL, CLRW, CSTAT, MATH0-MATH3, PKHA registers,
+ * CONTEXT1, CONTEXT2, DESCBUF, JOBDESCBUF, SHAREDESCBUF. In case of
+ * immediate value, IMMED, COPY and DCOPY flags indicate action taken
+ * (inline imm data, inline ptr, inline from ptr).
+ * @offset: start point for reading from source register (uint16_t)
+ * @length: number of bytes to store (uint32_t)
+ * @flags: operational flags: SGF, IMMED, COPY, DCOPY
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQSTORE(program, src, offset, length, flags) \
+ rta_store(program, src, offset, NONE, length, flags|SEQ)
+
+/**
+ * MATHB - Configures MATHB command to perform binary operations
+ * @program: pointer to struct program
+ * @operand1: first operand: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ, VSEQINSZ,
+ * VSEQOUTSZ, ZERO, ONE, NONE, Immediate value. IMMED must be used to
+ * indicate immediate value.
+ * @operator: function to be performed: ADD, ADDC, SUB, SUBB, OR, AND, XOR,
+ * LSHIFT, RSHIFT, SHLD.
+ * @operand2: second operand: MATH0-MATH3, DPOVRD, VSEQINSZ, VSEQOUTSZ, ABD,
+ * OFIFO, JOBSRC, ZERO, ONE, Immediate value. IMMED2 must be used to
+ * indicate immediate value.
+ * @result: destination for the result: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ,
+ * NONE, VSEQINSZ, VSEQOUTSZ.
+ * @length: length in bytes of the operation and the immediate value, if there
+ * is one (int).
+ * @opt: operational flags: IFB, NFU, STL, SWP, IMMED, IMMED2
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MATHB(program, operand1, operator, operand2, result, length, opt) \
+ rta_math(program, operand1, MATH_FUN_##operator, operand2, result, \
+ length, opt)
+
+/**
+ * MATHI - Configures MATHI command to perform binary operations
+ * @program: pointer to struct program
+ * @operand: if !SSEL: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ, VSEQINSZ,
+ * VSEQOUTSZ, ZERO, ONE.
+ * if SSEL: MATH0-MATH3, DPOVRD, VSEQINSZ, VSEQOUTSZ, ABD, OFIFO,
+ * JOBSRC, ZERO, ONE.
+ * @operator: function to be performed: ADD, ADDC, SUB, SUBB, OR, AND, XOR,
+ * LSHIFT, RSHIFT, FBYT (for !SSEL only).
+ * @imm: Immediate value (uint8_t). IMMED must be used to indicate immediate
+ * value.
+ * @result: destination for the result: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ,
+ * NONE, VSEQINSZ, VSEQOUTSZ.
+ * @length: length in bytes of the operation and the immediate value, if there
+ * is one (int). @imm is left-extended with zeros if needed.
+ * @opt: operational flags: NFU, SSEL, SWP, IMMED
+ *
+ * If !SSEL, @operand <@operator> @imm -> @result
+ * If SSEL, @imm <@operator> @operand -> @result
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MATHI(program, operand, operator, imm, result, length, opt) \
+ rta_mathi(program, operand, MATH_FUN_##operator, imm, result, length, \
+ opt)
+
+/**
+ * MATHU - Configures MATHU command to perform unary operations
+ * @program: pointer to struct program
+ * @operand1: operand: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ, VSEQINSZ,
+ * VSEQOUTSZ, ZERO, ONE, NONE, Immediate value. IMMED must be used to
+ * indicate immediate value.
+ * @operator: function to be performed: ZBYT, BSWAP
+ * @result: destination for the result: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ,
+ * NONE, VSEQINSZ, VSEQOUTSZ.
+ * @length: length in bytes of the operation and the immediate value, if there
+ * is one (int).
+ * @opt: operational flags: NFU, STL, SWP, IMMED
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MATHU(program, operand1, operator, result, length, opt) \
+ rta_math(program, operand1, MATH_FUN_##operator, NONE, result, length, \
+ opt)
+
+/**
+ * SIGNATURE - Configures SIGNATURE command
+ * @program: pointer to struct program
+ * @sign_type: signature type: SIGN_TYPE_FINAL, SIGN_TYPE_FINAL_RESTORE,
+ * SIGN_TYPE_FINAL_NONZERO, SIGN_TYPE_IMM_2, SIGN_TYPE_IMM_3,
+ * SIGN_TYPE_IMM_4.
+ *
+ * After SIGNATURE command, DWORD or WORD must be used to insert signature in
+ * descriptor buffer.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SIGNATURE(program, sign_type) rta_signature(program, sign_type)
+
+/**
+ * NFIFOADD - Configures NFIFO command, a shortcut of RTA Load command to write
+ * to iNfo FIFO.
+ * @program: pointer to struct program
+ * @src: source for the input data in Alignment Block:IFIFO, OFIFO, PAD,
+ * MSGOUTSNOOP, ALTSOURCE, OFIFO_SYNC, MSGOUTSNOOP_ALT.
+ * @data: type of data that is going through the Input Data FIFO: MSG, MSG1,
+ * MSG2, IV1, IV2, ICV1, ICV2, SAD1, AAD1, AAD2, AFHA_SBOX, SKIP,
+ * PKHA registers, AB1, AB2, ABD.
+ * @length: length of the data copied in FIFO registers (uint32_t)
+ * @flags: select options between:
+ * -operational flags: LAST1, LAST2, FLUSH1, FLUSH2, OC, BP
+ * -when PAD is selected as source: BM, PR, PS
+ * -padding type: <em>PAD_ZERO, PAD_NONZERO, PAD_INCREMENT, PAD_RANDOM,
+ * PAD_ZERO_N1, PAD_NONZERO_0, PAD_N1, PAD_NONZERO_N
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define NFIFOADD(program, src, data, length, flags) \
+ rta_nfifo_load(program, src, data, length, flags)
+
+/**
+ * DOC: Self Referential Code Management Routines
+ *
+ * Contains details of RTA self referential code routines.
+ */
+
+/**
+ * REFERENCE - initialize a variable used for storing an index inside a
+ * descriptor buffer.
+ * @ref: reference to a descriptor buffer's index where an update is required
+ * with a value that will be known latter in the program flow.
+ */
+#define REFERENCE(ref) int ref = -1
+
+/**
+ * LABEL - initialize a variable used for storing an index inside a descriptor
+ * buffer.
+ * @label: label stores the value with what should be updated the REFERENCE line
+ * in the descriptor buffer.
+ */
+#define LABEL(label) unsigned label = 0
+
+/**
+ * SET_LABEL - set a LABEL value
+ * @program: pointer to struct program
+ * @label: value that will be inserted in a line previously written in the
+ * descriptor buffer.
+ */
+#define SET_LABEL(program, label) label = rta_set_label(program)
+
+/**
+ * PATCH_JUMP - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned). For
+ * JUMP command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_JUMP(program, line, new_ref) rta_patch_jmp(program, line, new_ref)
+
+/**
+ * PATCH_MOVE - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned). For
+ * MOVE command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_MOVE(program, line, new_ref) \
+ rta_patch_move(program, line, new_ref)
+
+/**
+ * PATCH_LOAD - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned). For
+ * LOAD command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_LOAD(program, line, new_ref) \
+ rta_patch_load(program, line, new_ref)
+
+/**
+ * PATCH_STORE - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned). For
+ * STORE command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_STORE(program, line, new_ref) \
+ rta_patch_store(program, line, new_ref)
+
+/**
+ * PATCH_HDR - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned). For
+ * HEADER command, the value represents the start index field.
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_HDR(program, line, new_ref) \
+ rta_patch_header(program, line, new_ref)
+
+/**
+ * PATCH_RAW - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @mask: mask to be used for applying the new value (unsigned). The mask
+ * selects which bits from the provided @new_val are taken into
+ * consideration when overwriting the existing value.
+ * @new_val: updated value that will be masked using the provided mask value
+ * and inserted in descriptor buffer at the specified line.
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_RAW(program, line, mask, new_val) \
+ rta_patch_raw(program, line, mask, new_val)
+
+#endif /* __RTA_RTA_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/fifo_load_store_cmd.h b/drivers/common/dpaa2/flib/rta/fifo_load_store_cmd.h
new file mode 100644
index 0000000..4472160
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/fifo_load_store_cmd.h
@@ -0,0 +1,308 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_FIFO_LOAD_STORE_CMD_H__
+#define __RTA_FIFO_LOAD_STORE_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t fifo_load_table[][2] = {
+/*1*/ { PKA0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A0 },
+ { PKA1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A1 },
+ { PKA2, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A2 },
+ { PKA3, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A3 },
+ { PKB0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B0 },
+ { PKB1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B1 },
+ { PKB2, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B2 },
+ { PKB3, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B3 },
+ { PKA, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A },
+ { PKB, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B },
+ { PKN, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_N },
+ { SKIP, FIFOLD_CLASS_SKIP },
+ { MSG1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_MSG },
+ { MSG2, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_MSG },
+ { MSGOUTSNOOP, FIFOLD_CLASS_BOTH | FIFOLD_TYPE_MSG1OUT2 },
+ { MSGINSNOOP, FIFOLD_CLASS_BOTH | FIFOLD_TYPE_MSG },
+ { IV1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_IV },
+ { IV2, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_IV },
+ { AAD1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_AAD },
+ { ICV1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_ICV },
+ { ICV2, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_ICV },
+ { BIT_DATA, FIFOLD_TYPE_BITDATA },
+/*23*/ { IFIFO, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_NOINFOFIFO }
+};
+
+/*
+ * Allowed FIFO_LOAD input data types for each SEC Era.
+ * Values represent the number of entries from fifo_load_table[] that are
+ * supported.
+ */
+static const unsigned fifo_load_table_sz[] = {22, 22, 23, 23, 23, 23, 23, 23};
+
+static inline int rta_fifo_load(struct program *program, uint32_t src,
+ uint64_t loc, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ uint32_t ext_length = 0, val = 0;
+ int ret = -EINVAL;
+ bool is_seq_cmd = false;
+ unsigned start_pc = program->current_pc;
+
+ /* write command type field */
+ if (flags & SEQ) {
+ opcode = CMD_SEQ_FIFO_LOAD;
+ is_seq_cmd = true;
+ } else {
+ opcode = CMD_FIFO_LOAD;
+ }
+
+ /* Parameters checking */
+ if (is_seq_cmd) {
+ if ((flags & IMMED) || (flags & SGF)) {
+ pr_err("SEQ FIFO LOAD: Invalid command\n");
+ goto err;
+ }
+ if ((rta_sec_era <= RTA_SEC_ERA_5) && (flags & AIDF)) {
+ pr_err("SEQ FIFO LOAD: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ if ((flags & VLF) && ((flags & EXT) || (length >> 16))) {
+ pr_err("SEQ FIFO LOAD: Invalid usage of VLF\n");
+ goto err;
+ }
+ } else {
+ if (src == SKIP) {
+ pr_err("FIFO LOAD: Invalid src\n");
+ goto err;
+ }
+ if ((flags & AIDF) || (flags & VLF)) {
+ pr_err("FIFO LOAD: Invalid command\n");
+ goto err;
+ }
+ if ((flags & IMMED) && (flags & SGF)) {
+ pr_err("FIFO LOAD: Invalid usage of SGF and IMM\n");
+ goto err;
+ }
+ if ((flags & IMMED) && ((flags & EXT) || (length >> 16))) {
+ pr_err("FIFO LOAD: Invalid usage of EXT and IMM\n");
+ goto err;
+ }
+ }
+
+ /* write input data type field */
+ ret = __rta_map_opcode(src, fifo_load_table,
+ fifo_load_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("FIFO LOAD: Source value is not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= val;
+
+ if (flags & CLASS1)
+ opcode |= FIFOLD_CLASS_CLASS1;
+ if (flags & CLASS2)
+ opcode |= FIFOLD_CLASS_CLASS2;
+ if (flags & BOTH)
+ opcode |= FIFOLD_CLASS_BOTH;
+
+ /* write fields: SGF|VLF, IMM, [LC1, LC2, F1] */
+ if (flags & FLUSH1)
+ opcode |= FIFOLD_TYPE_FLUSH1;
+ if (flags & LAST1)
+ opcode |= FIFOLD_TYPE_LAST1;
+ if (flags & LAST2)
+ opcode |= FIFOLD_TYPE_LAST2;
+ if (!is_seq_cmd) {
+ if (flags & SGF)
+ opcode |= FIFOLDST_SGF;
+ if (flags & IMMED)
+ opcode |= FIFOLD_IMM;
+ } else {
+ if (flags & VLF)
+ opcode |= FIFOLDST_VLF;
+ if (flags & AIDF)
+ opcode |= FIFOLD_AIDF;
+ }
+
+ /*
+ * Verify if extended length is required. In case of BITDATA, calculate
+ * number of full bytes and additional valid bits.
+ */
+ if ((flags & EXT) || (length >> 16)) {
+ opcode |= FIFOLDST_EXT;
+ if (src == BIT_DATA) {
+ ext_length = (length / 8);
+ length = (length % 8);
+ } else {
+ ext_length = length;
+ length = 0;
+ }
+ }
+ opcode |= (uint16_t) length;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer or immediate data field */
+ if (flags & IMMED)
+ __rta_inline_data(program, loc, flags & __COPY_MASK, length);
+ else if (!is_seq_cmd)
+ __rta_out64(program, program->ps, loc);
+
+ /* write extended length field */
+ if (opcode & FIFOLDST_EXT)
+ __rta_out32(program, ext_length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static const uint32_t fifo_store_table[][2] = {
+/*1*/ { PKA0, FIFOST_TYPE_PKHA_A0 },
+ { PKA1, FIFOST_TYPE_PKHA_A1 },
+ { PKA2, FIFOST_TYPE_PKHA_A2 },
+ { PKA3, FIFOST_TYPE_PKHA_A3 },
+ { PKB0, FIFOST_TYPE_PKHA_B0 },
+ { PKB1, FIFOST_TYPE_PKHA_B1 },
+ { PKB2, FIFOST_TYPE_PKHA_B2 },
+ { PKB3, FIFOST_TYPE_PKHA_B3 },
+ { PKA, FIFOST_TYPE_PKHA_A },
+ { PKB, FIFOST_TYPE_PKHA_B },
+ { PKN, FIFOST_TYPE_PKHA_N },
+ { PKE, FIFOST_TYPE_PKHA_E_JKEK },
+ { RNG, FIFOST_TYPE_RNGSTORE },
+ { RNGOFIFO, FIFOST_TYPE_RNGFIFO },
+ { AFHA_SBOX, FIFOST_TYPE_AF_SBOX_JKEK },
+ { MDHA_SPLIT_KEY, FIFOST_CLASS_CLASS2KEY | FIFOST_TYPE_SPLIT_KEK },
+ { MSG, FIFOST_TYPE_MESSAGE_DATA },
+ { KEY1, FIFOST_CLASS_CLASS1KEY | FIFOST_TYPE_KEY_KEK },
+ { KEY2, FIFOST_CLASS_CLASS2KEY | FIFOST_TYPE_KEY_KEK },
+ { OFIFO, FIFOST_TYPE_OUTFIFO_KEK},
+ { SKIP, FIFOST_TYPE_SKIP },
+/*22*/ { METADATA, FIFOST_TYPE_METADATA},
+ { MSG_CKSUM, FIFOST_TYPE_MESSAGE_DATA2 }
+};
+
+/*
+ * Allowed FIFO_STORE output data types for each SEC Era.
+ * Values represent the number of entries from fifo_store_table[] that are
+ * supported.
+ */
+static const unsigned fifo_store_table_sz[] = {21, 21, 21, 21, 22, 22, 22, 23};
+
+static inline int rta_fifo_store(struct program *program, uint32_t src,
+ uint32_t encrypt_flags, uint64_t dst,
+ uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ bool is_seq_cmd = false;
+ unsigned start_pc = program->current_pc;
+
+ /* write command type field */
+ if (flags & SEQ) {
+ opcode = CMD_SEQ_FIFO_STORE;
+ is_seq_cmd = true;
+ } else {
+ opcode = CMD_FIFO_STORE;
+ }
+
+ /* Parameter checking */
+ if (is_seq_cmd) {
+ if ((flags & VLF) && ((length >> 16) || (flags & EXT))) {
+ pr_err("SEQ FIFO STORE: Invalid usage of VLF\n");
+ goto err;
+ }
+ if (dst) {
+ pr_err("SEQ FIFO STORE: Invalid command\n");
+ goto err;
+ }
+ if ((src == METADATA) && (flags & (CONT | EXT))) {
+ pr_err("SEQ FIFO STORE: Invalid flags\n");
+ goto err;
+ }
+ } else {
+ if (((src == RNGOFIFO) && ((dst) || (flags & EXT))) ||
+ (src == METADATA)) {
+ pr_err("FIFO STORE: Invalid destination\n");
+ goto err;
+ }
+ }
+ if ((rta_sec_era == RTA_SEC_ERA_7) && (src == AFHA_SBOX)) {
+ pr_err("FIFO STORE: AFHA S-box not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ /* write output data type field */
+ ret = __rta_map_opcode(src, fifo_store_table,
+ fifo_store_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("FIFO STORE: Source type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= val;
+
+ if (encrypt_flags & TK)
+ opcode |= (0x1 << FIFOST_TYPE_SHIFT);
+ if (encrypt_flags & EKT) {
+ if (rta_sec_era == RTA_SEC_ERA_1) {
+ pr_err("FIFO STORE: AES-CCM source types not supported\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ opcode |= (0x10 << FIFOST_TYPE_SHIFT);
+ opcode &= (uint32_t)~(0x20 << FIFOST_TYPE_SHIFT);
+ }
+
+ /* write flags fields */
+ if (flags & CONT)
+ opcode |= FIFOST_CONT;
+ if ((flags & VLF) && (is_seq_cmd))
+ opcode |= FIFOLDST_VLF;
+ if ((flags & SGF) && (!is_seq_cmd))
+ opcode |= FIFOLDST_SGF;
+ if (flags & CLASS1)
+ opcode |= FIFOST_CLASS_CLASS1KEY;
+ if (flags & CLASS2)
+ opcode |= FIFOST_CLASS_CLASS2KEY;
+ if (flags & BOTH)
+ opcode |= FIFOST_CLASS_BOTH;
+
+ /* Verify if extended length is required */
+ if ((length >> 16) || (flags & EXT))
+ opcode |= FIFOLDST_EXT;
+ else
+ opcode |= (uint16_t) length;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer field */
+ if ((!is_seq_cmd) && (dst))
+ __rta_out64(program, program->ps, dst);
+
+ /* write extended length field */
+ if (opcode & FIFOLDST_EXT)
+ __rta_out32(program, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_FIFO_LOAD_STORE_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/header_cmd.h b/drivers/common/dpaa2/flib/rta/header_cmd.h
new file mode 100644
index 0000000..e298aca
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/header_cmd.h
@@ -0,0 +1,213 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_HEADER_CMD_H__
+#define __RTA_HEADER_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed job header flags for each SEC Era. */
+static const uint32_t job_header_flags[] = {
+ DNR | TD | MTD | SHR | REO,
+ DNR | TD | MTD | SHR | REO | RSMS,
+ DNR | TD | MTD | SHR | REO | RSMS,
+ DNR | TD | MTD | SHR | REO | RSMS,
+ DNR | TD | MTD | SHR | REO | RSMS | EXT,
+ DNR | TD | MTD | SHR | REO | RSMS | EXT,
+ DNR | TD | MTD | SHR | REO | RSMS | EXT,
+ DNR | TD | MTD | SHR | REO | EXT
+};
+
+/* Allowed shared header flags for each SEC Era. */
+static const uint32_t shr_header_flags[] = {
+ DNR | SC | PD,
+ DNR | SC | PD | CIF,
+ DNR | SC | PD | CIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF
+};
+
+static inline int rta_shr_header(struct program *program,
+ enum rta_share_type share, unsigned start_idx,
+ uint32_t flags)
+{
+ uint32_t opcode = CMD_SHARED_DESC_HDR;
+ unsigned start_pc = program->current_pc;
+
+ if (flags & ~shr_header_flags[rta_sec_era]) {
+ pr_err("SHR_DESC: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ switch (share) {
+ case SHR_ALWAYS:
+ opcode |= HDR_SHARE_ALWAYS;
+ break;
+ case SHR_SERIAL:
+ opcode |= HDR_SHARE_SERIAL;
+ break;
+ case SHR_NEVER:
+ /*
+ * opcode |= HDR_SHARE_NEVER;
+ * HDR_SHARE_NEVER is 0
+ */
+ break;
+ case SHR_WAIT:
+ opcode |= HDR_SHARE_WAIT;
+ break;
+ default:
+ pr_err("SHR_DESC: SHARE VALUE is not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ opcode |= HDR_ONE;
+ opcode |= (start_idx << HDR_START_IDX_SHIFT) & HDR_START_IDX_MASK;
+
+ if (flags & DNR)
+ opcode |= HDR_DNR;
+ if (flags & CIF)
+ opcode |= HDR_CLEAR_IFIFO;
+ if (flags & SC)
+ opcode |= HDR_SAVECTX;
+ if (flags & PD)
+ opcode |= HDR_PROP_DNR;
+ if (flags & RIF)
+ opcode |= HDR_RIF;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (program->current_instruction == 1)
+ program->shrhdr = program->buffer;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+static inline int rta_job_header(struct program *program,
+ enum rta_share_type share, unsigned start_idx,
+ uint64_t shr_desc, uint32_t flags,
+ uint32_t ext_flags)
+{
+ uint32_t opcode = CMD_DESC_HDR;
+ uint32_t hdr_ext = 0;
+ unsigned start_pc = program->current_pc;
+
+ if (flags & ~job_header_flags[rta_sec_era]) {
+ pr_err("JOB_DESC: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ switch (share) {
+ case SHR_ALWAYS:
+ opcode |= HDR_SHARE_ALWAYS;
+ break;
+ case SHR_SERIAL:
+ opcode |= HDR_SHARE_SERIAL;
+ break;
+ case SHR_NEVER:
+ /*
+ * opcode |= HDR_SHARE_NEVER;
+ * HDR_SHARE_NEVER is 0
+ */
+ break;
+ case SHR_WAIT:
+ opcode |= HDR_SHARE_WAIT;
+ break;
+ case SHR_DEFER:
+ opcode |= HDR_SHARE_DEFER;
+ break;
+ default:
+ pr_err("JOB_DESC: SHARE VALUE is not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if ((flags & TD) && (flags & REO)) {
+ pr_err("JOB_DESC: REO flag not supported for trusted descriptors. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if ((rta_sec_era < RTA_SEC_ERA_7) && (flags & MTD) && !(flags & TD)) {
+ pr_err("JOB_DESC: Trying to MTD a descriptor that is not a TD. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if ((flags & EXT) && !(flags & SHR) && (start_idx < 2)) {
+ pr_err("JOB_DESC: Start index must be >= 2 in case of no SHR and EXT. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ opcode |= HDR_ONE;
+ opcode |= ((start_idx << HDR_START_IDX_SHIFT) & HDR_START_IDX_MASK);
+
+ if (flags & EXT) {
+ opcode |= HDR_EXT;
+
+ if (ext_flags & DSV) {
+ hdr_ext |= HDR_EXT_DSEL_VALID;
+ hdr_ext |= ext_flags & DSEL_MASK;
+ }
+
+ if (ext_flags & FTD) {
+ if (rta_sec_era <= RTA_SEC_ERA_5) {
+ pr_err("JOB_DESC: Fake trusted descriptor not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ hdr_ext |= HDR_EXT_FTD;
+ }
+ }
+ if (flags & RSMS)
+ opcode |= HDR_RSLS;
+ if (flags & DNR)
+ opcode |= HDR_DNR;
+ if (flags & TD)
+ opcode |= HDR_TRUSTED;
+ if (flags & MTD)
+ opcode |= HDR_MAKE_TRUSTED;
+ if (flags & REO)
+ opcode |= HDR_REVERSE;
+ if (flags & SHR)
+ opcode |= HDR_SHARED;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (program->current_instruction == 1) {
+ program->jobhdr = program->buffer;
+
+ if (opcode & HDR_SHARED)
+ __rta_out64(program, program->ps, shr_desc);
+ }
+
+ if (flags & EXT)
+ __rta_out32(program, hdr_ext);
+
+ /* Note: descriptor length is set in program_finalize routine */
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+#endif /* __RTA_HEADER_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/jump_cmd.h b/drivers/common/dpaa2/flib/rta/jump_cmd.h
new file mode 100644
index 0000000..9d04293
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/jump_cmd.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_JUMP_CMD_H__
+#define __RTA_JUMP_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t jump_test_cond[][2] = {
+ { NIFP, JUMP_COND_NIFP },
+ { NIP, JUMP_COND_NIP },
+ { NOP, JUMP_COND_NOP },
+ { NCP, JUMP_COND_NCP },
+ { CALM, JUMP_COND_CALM },
+ { SELF, JUMP_COND_SELF },
+ { SHRD, JUMP_COND_SHRD },
+ { JQP, JUMP_COND_JQP },
+ { MATH_Z, JUMP_COND_MATH_Z },
+ { MATH_N, JUMP_COND_MATH_N },
+ { MATH_NV, JUMP_COND_MATH_NV },
+ { MATH_C, JUMP_COND_MATH_C },
+ { PK_0, JUMP_COND_PK_0 },
+ { PK_GCD_1, JUMP_COND_PK_GCD_1 },
+ { PK_PRIME, JUMP_COND_PK_PRIME },
+ { CLASS1, JUMP_CLASS_CLASS1 },
+ { CLASS2, JUMP_CLASS_CLASS2 },
+ { BOTH, JUMP_CLASS_BOTH }
+};
+
+static const uint32_t jump_test_math_cond[][2] = {
+ { MATH_Z, JUMP_COND_MATH_Z },
+ { MATH_N, JUMP_COND_MATH_N },
+ { MATH_NV, JUMP_COND_MATH_NV },
+ { MATH_C, JUMP_COND_MATH_C }
+};
+
+static const uint32_t jump_src_dst[][2] = {
+ { MATH0, JUMP_SRC_DST_MATH0 },
+ { MATH1, JUMP_SRC_DST_MATH1 },
+ { MATH2, JUMP_SRC_DST_MATH2 },
+ { MATH3, JUMP_SRC_DST_MATH3 },
+ { DPOVRD, JUMP_SRC_DST_DPOVRD },
+ { SEQINSZ, JUMP_SRC_DST_SEQINLEN },
+ { SEQOUTSZ, JUMP_SRC_DST_SEQOUTLEN },
+ { VSEQINSZ, JUMP_SRC_DST_VARSEQINLEN },
+ { VSEQOUTSZ, JUMP_SRC_DST_VARSEQOUTLEN }
+};
+
+static inline int rta_jump(struct program *program, uint64_t address,
+ enum rta_jump_type jump_type,
+ enum rta_jump_cond test_type,
+ uint32_t test_condition, uint32_t src_dst)
+{
+ uint32_t opcode = CMD_JUMP;
+ unsigned start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ if (((jump_type == GOSUB) || (jump_type == RETURN)) &&
+ (rta_sec_era < RTA_SEC_ERA_4)) {
+ pr_err("JUMP: Jump type not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ if (((jump_type == LOCAL_JUMP_INC) || (jump_type == LOCAL_JUMP_DEC)) &&
+ (rta_sec_era <= RTA_SEC_ERA_5)) {
+ pr_err("JUMP_INCDEC: Jump type not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ switch (jump_type) {
+ case (LOCAL_JUMP):
+ /*
+ * opcode |= JUMP_TYPE_LOCAL;
+ * JUMP_TYPE_LOCAL is 0
+ */
+ break;
+ case (HALT):
+ opcode |= JUMP_TYPE_HALT;
+ break;
+ case (HALT_STATUS):
+ opcode |= JUMP_TYPE_HALT_USER;
+ break;
+ case (FAR_JUMP):
+ opcode |= JUMP_TYPE_NONLOCAL;
+ break;
+ case (GOSUB):
+ opcode |= JUMP_TYPE_GOSUB;
+ break;
+ case (RETURN):
+ opcode |= JUMP_TYPE_RETURN;
+ break;
+ case (LOCAL_JUMP_INC):
+ opcode |= JUMP_TYPE_LOCAL_INC;
+ break;
+ case (LOCAL_JUMP_DEC):
+ opcode |= JUMP_TYPE_LOCAL_DEC;
+ break;
+ default:
+ pr_err("JUMP: Invalid jump type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ switch (test_type) {
+ case (ALL_TRUE):
+ /*
+ * opcode |= JUMP_TEST_ALL;
+ * JUMP_TEST_ALL is 0
+ */
+ break;
+ case (ALL_FALSE):
+ opcode |= JUMP_TEST_INVALL;
+ break;
+ case (ANY_TRUE):
+ opcode |= JUMP_TEST_ANY;
+ break;
+ case (ANY_FALSE):
+ opcode |= JUMP_TEST_INVANY;
+ break;
+ default:
+ pr_err("JUMP: test type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ /* write test condition field */
+ if ((jump_type != LOCAL_JUMP_INC) && (jump_type != LOCAL_JUMP_DEC)) {
+ __rta_map_flags(test_condition, jump_test_cond,
+ ARRAY_SIZE(jump_test_cond), &opcode);
+ } else {
+ uint32_t val = 0;
+
+ ret = __rta_map_opcode(src_dst, jump_src_dst,
+ ARRAY_SIZE(jump_src_dst), &val);
+ if (ret < 0) {
+ pr_err("JUMP_INCDEC: SRC_DST not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ __rta_map_flags(test_condition, jump_test_math_cond,
+ ARRAY_SIZE(jump_test_math_cond), &opcode);
+ }
+
+ /* write local offset field for local jumps and user-defined halt */
+ if ((jump_type == LOCAL_JUMP) || (jump_type == LOCAL_JUMP_INC) ||
+ (jump_type == LOCAL_JUMP_DEC) || (jump_type == GOSUB) ||
+ (jump_type == HALT_STATUS))
+ opcode |= (uint32_t)(address & JUMP_OFFSET_MASK);
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (jump_type == FAR_JUMP)
+ __rta_out64(program, program->ps, address);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_JUMP_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/key_cmd.h b/drivers/common/dpaa2/flib/rta/key_cmd.h
new file mode 100644
index 0000000..8969160
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/key_cmd.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_KEY_CMD_H__
+#define __RTA_KEY_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed encryption flags for each SEC Era */
+static const uint32_t key_enc_flags[] = {
+ ENC,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK | PTS,
+ ENC | NWB | EKT | TK | PTS
+};
+
+static inline int rta_key(struct program *program, uint32_t key_dst,
+ uint32_t encrypt_flags, uint64_t src, uint32_t length,
+ uint32_t flags)
+{
+ uint32_t opcode = 0;
+ bool is_seq_cmd = false;
+ unsigned start_pc = program->current_pc;
+
+ if (encrypt_flags & ~key_enc_flags[rta_sec_era]) {
+ pr_err("KEY: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ /* write cmd type */
+ if (flags & SEQ) {
+ opcode = CMD_SEQ_KEY;
+ is_seq_cmd = true;
+ } else {
+ opcode = CMD_KEY;
+ }
+
+ /* check parameters */
+ if (is_seq_cmd) {
+ if ((flags & IMMED) || (flags & SGF)) {
+ pr_err("SEQKEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if ((rta_sec_era <= RTA_SEC_ERA_5) &&
+ ((flags & VLF) || (flags & AIDF))) {
+ pr_err("SEQKEY: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ } else {
+ if ((flags & AIDF) || (flags & VLF)) {
+ pr_err("KEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if ((flags & SGF) && (flags & IMMED)) {
+ pr_err("KEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ }
+
+ if ((encrypt_flags & PTS) &&
+ ((encrypt_flags & ENC) || (encrypt_flags & NWB) ||
+ (key_dst == PKE))) {
+ pr_err("KEY: Invalid flag / destination. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if (key_dst == AFHA_SBOX) {
+ if (rta_sec_era == RTA_SEC_ERA_7) {
+ pr_err("KEY: AFHA S-box not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ if (flags & IMMED) {
+ pr_err("KEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ /*
+ * Sbox data loaded into the ARC-4 processor must be exactly
+ * 258 bytes long, or else a data sequence error is generated.
+ */
+ if (length != 258) {
+ pr_err("KEY: Invalid length. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ }
+
+ /* write key destination and class fields */
+ switch (key_dst) {
+ case (KEY1):
+ opcode |= KEY_DEST_CLASS1;
+ break;
+ case (KEY2):
+ opcode |= KEY_DEST_CLASS2;
+ break;
+ case (PKE):
+ opcode |= KEY_DEST_CLASS1 | KEY_DEST_PKHA_E;
+ break;
+ case (AFHA_SBOX):
+ opcode |= KEY_DEST_CLASS1 | KEY_DEST_AFHA_SBOX;
+ break;
+ case (MDHA_SPLIT_KEY):
+ opcode |= KEY_DEST_CLASS2 | KEY_DEST_MDHA_SPLIT;
+ break;
+ default:
+ pr_err("KEY: Invalid destination. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ /* write key length */
+ length &= KEY_LENGTH_MASK;
+ opcode |= length;
+
+ /* write key command specific flags */
+ if (encrypt_flags & ENC) {
+ /* Encrypted (black) keys must be padded to 8 bytes (CCM) or
+ 16 bytes (ECB) depending on EKT bit. AES-CCM encrypted keys
+ (EKT = 1) have 6-byte nonce and 6-byte MAC after padding.
+ */
+ opcode |= KEY_ENC;
+ if (encrypt_flags & EKT) {
+ opcode |= KEY_EKT;
+ length = ALIGN(length, 8);
+ length += 12;
+ } else {
+ length = ALIGN(length, 16);
+ }
+ if (encrypt_flags & TK)
+ opcode |= KEY_TK;
+ }
+ if (encrypt_flags & NWB)
+ opcode |= KEY_NWB;
+ if (encrypt_flags & PTS)
+ opcode |= KEY_PTS;
+
+ /* write general command flags */
+ if (!is_seq_cmd) {
+ if (flags & IMMED)
+ opcode |= KEY_IMM;
+ if (flags & SGF)
+ opcode |= KEY_SGF;
+ } else {
+ if (flags & AIDF)
+ opcode |= KEY_AIDF;
+ if (flags & VLF)
+ opcode |= KEY_VLF;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (flags & IMMED)
+ __rta_inline_data(program, src, flags & __COPY_MASK, length);
+ else
+ __rta_out64(program, program->ps, src);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+#endif /* __RTA_KEY_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/load_cmd.h b/drivers/common/dpaa2/flib/rta/load_cmd.h
new file mode 100644
index 0000000..6954912
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/load_cmd.h
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_LOAD_CMD_H__
+#define __RTA_LOAD_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed length and offset masks for each SEC Era in case DST = DCTRL */
+static const uint32_t load_len_mask_allowed[] = {
+ 0x000000ee,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe
+};
+
+static const uint32_t load_off_mask_allowed[] = {
+ 0x0000000f,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff
+};
+
+#define IMM_MUST 0
+#define IMM_CAN 1
+#define IMM_NO 2
+#define IMM_DSNM 3 /* it doesn't matter the src type */
+
+enum e_lenoff {
+ LENOF_03,
+ LENOF_4,
+ LENOF_48,
+ LENOF_448,
+ LENOF_18,
+ LENOF_32,
+ LENOF_24,
+ LENOF_16,
+ LENOF_8,
+ LENOF_128,
+ LENOF_256,
+ DSNM /* it doesn't matter the length/offset values */
+};
+
+struct load_map {
+ uint32_t dst;
+ uint32_t dst_opcode;
+ enum e_lenoff len_off;
+ uint8_t imm_src;
+
+};
+
+static const struct load_map load_dst[] = {
+/*1*/ { KEY1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_KEYSZ_REG,
+ LENOF_4, IMM_MUST },
+ { KEY2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_KEYSZ_REG,
+ LENOF_4, IMM_MUST },
+ { DATA1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DATASZ_REG,
+ LENOF_448, IMM_MUST },
+ { DATA2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_DATASZ_REG,
+ LENOF_448, IMM_MUST },
+ { ICV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_ICVSZ_REG,
+ LENOF_4, IMM_MUST },
+ { ICV2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_ICVSZ_REG,
+ LENOF_4, IMM_MUST },
+ { CCTRL, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_CHACTRL,
+ LENOF_4, IMM_MUST },
+ { DCTRL, LDST_CLASS_DECO | LDST_IMM | LDST_SRCDST_WORD_DECOCTRL,
+ DSNM, IMM_DSNM },
+ { ICTRL, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_IRQCTRL,
+ LENOF_4, IMM_MUST },
+ { DPOVRD, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_PCLOVRD,
+ LENOF_4, IMM_MUST },
+ { CLRW, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_CLRW,
+ LENOF_4, IMM_MUST },
+ { AAD1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DECO_AAD_SZ,
+ LENOF_4, IMM_MUST },
+ { IV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_CLASS1_IV_SZ,
+ LENOF_4, IMM_MUST },
+ { ALTDS1, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_ALTDS_CLASS1,
+ LENOF_448, IMM_MUST },
+ { PKASZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_A_SZ,
+ LENOF_4, IMM_MUST, },
+ { PKBSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_B_SZ,
+ LENOF_4, IMM_MUST },
+ { PKNSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_N_SZ,
+ LENOF_4, IMM_MUST },
+ { PKESZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_E_SZ,
+ LENOF_4, IMM_MUST },
+ { NFIFO, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_INFO_FIFO,
+ LENOF_48, IMM_MUST },
+ { IFIFO, LDST_SRCDST_BYTE_INFIFO, LENOF_18, IMM_MUST },
+ { OFIFO, LDST_SRCDST_BYTE_OUTFIFO, LENOF_18, IMM_MUST },
+ { MATH0, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH0,
+ LENOF_32, IMM_CAN },
+ { MATH1, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH1,
+ LENOF_24, IMM_CAN },
+ { MATH2, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH2,
+ LENOF_16, IMM_CAN },
+ { MATH3, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH3,
+ LENOF_8, IMM_CAN },
+ { CONTEXT1, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT,
+ LENOF_128, IMM_CAN },
+ { CONTEXT2, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT,
+ LENOF_128, IMM_CAN },
+ { KEY1, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_KEY,
+ LENOF_32, IMM_CAN },
+ { KEY2, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_KEY,
+ LENOF_32, IMM_CAN },
+ { DESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF,
+ LENOF_256, IMM_NO },
+ { DPID, LDST_CLASS_DECO | LDST_SRCDST_WORD_PID,
+ LENOF_448, IMM_MUST },
+/*32*/ { IDFNS, LDST_SRCDST_WORD_IFNSR, LENOF_18, IMM_MUST },
+ { ODFNS, LDST_SRCDST_WORD_OFNSR, LENOF_18, IMM_MUST },
+ { ALTSOURCE, LDST_SRCDST_BYTE_ALTSOURCE, LENOF_18, IMM_MUST },
+/*35*/ { NFIFO_SZL, LDST_SRCDST_WORD_INFO_FIFO_SZL, LENOF_48, IMM_MUST },
+ { NFIFO_SZM, LDST_SRCDST_WORD_INFO_FIFO_SZM, LENOF_03, IMM_MUST },
+ { NFIFO_L, LDST_SRCDST_WORD_INFO_FIFO_L, LENOF_48, IMM_MUST },
+ { NFIFO_M, LDST_SRCDST_WORD_INFO_FIFO_M, LENOF_03, IMM_MUST },
+ { SZL, LDST_SRCDST_WORD_SZL, LENOF_48, IMM_MUST },
+/*40*/ { SZM, LDST_SRCDST_WORD_SZM, LENOF_03, IMM_MUST }
+};
+
+/*
+ * Allowed LOAD destinations for each SEC Era.
+ * Values represent the number of entries from load_dst[] that are supported.
+ */
+static const unsigned load_dst_sz[] = { 31, 34, 34, 40, 40, 40, 40, 40 };
+
+static inline int load_check_len_offset(int pos, uint32_t length,
+ uint32_t offset)
+{
+ if ((load_dst[pos].dst == DCTRL) &&
+ ((length & ~load_len_mask_allowed[rta_sec_era]) ||
+ (offset & ~load_off_mask_allowed[rta_sec_era])))
+ goto err;
+
+ switch (load_dst[pos].len_off) {
+ case (LENOF_03):
+ if ((length > 3) || (offset))
+ goto err;
+ break;
+ case (LENOF_4):
+ if ((length != 4) || (offset != 0))
+ goto err;
+ break;
+ case (LENOF_48):
+ if (!(((length == 4) && (offset == 0)) ||
+ ((length == 8) && (offset == 0))))
+ goto err;
+ break;
+ case (LENOF_448):
+ if (!(((length == 4) && (offset == 0)) ||
+ ((length == 4) && (offset == 4)) ||
+ ((length == 8) && (offset == 0))))
+ goto err;
+ break;
+ case (LENOF_18):
+ if ((length < 1) || (length > 8) || (offset != 0))
+ goto err;
+ break;
+ case (LENOF_32):
+ if ((length > 32) || (offset > 32) || ((offset + length) > 32))
+ goto err;
+ break;
+ case (LENOF_24):
+ if ((length > 24) || (offset > 24) || ((offset + length) > 24))
+ goto err;
+ break;
+ case (LENOF_16):
+ if ((length > 16) || (offset > 16) || ((offset + length) > 16))
+ goto err;
+ break;
+ case (LENOF_8):
+ if ((length > 8) || (offset > 8) || ((offset + length) > 8))
+ goto err;
+ break;
+ case (LENOF_128):
+ if ((length > 128) || (offset > 128) ||
+ ((offset + length) > 128))
+ goto err;
+ break;
+ case (LENOF_256):
+ if ((length < 1) || (length > 256) || ((length + offset) > 256))
+ goto err;
+ break;
+ case (DSNM):
+ break;
+ default:
+ goto err;
+ break;
+ }
+
+ return 0;
+err:
+ return -EINVAL;
+}
+
+static inline int rta_load(struct program *program, uint64_t src, uint64_t dst,
+ uint32_t offset, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ int pos = -1, ret = -EINVAL;
+ unsigned start_pc = program->current_pc, i;
+
+ if (flags & SEQ)
+ opcode = CMD_SEQ_LOAD;
+ else
+ opcode = CMD_LOAD;
+
+ if ((length & 0xffffff00) || (offset & 0xffffff00)) {
+ pr_err("LOAD: Bad length/offset passed. Should be 8 bits\n");
+ goto err;
+ }
+
+ if (flags & SGF)
+ opcode |= LDST_SGF;
+ if (flags & VLF)
+ opcode |= LDST_VLF;
+
+ /* check load destination, length and offset and source type */
+ for (i = 0; i < load_dst_sz[rta_sec_era]; i++)
+ if (dst == load_dst[i].dst) {
+ pos = (int)i;
+ break;
+ }
+ if (-1 == pos) {
+ pr_err("LOAD: Invalid dst. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if (flags & IMMED) {
+ if (load_dst[pos].imm_src == IMM_NO) {
+ pr_err("LOAD: Invalid source type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= LDST_IMM;
+ } else if (load_dst[pos].imm_src == IMM_MUST) {
+ pr_err("LOAD IMM: Invalid source type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ ret = load_check_len_offset(pos, length, offset);
+ if (ret < 0) {
+ pr_err("LOAD: Invalid length/offset. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ opcode |= load_dst[pos].dst_opcode;
+
+ /* DESC BUFFER: length / offset values are specified in 4-byte words */
+ if (dst == DESCBUF) {
+ opcode |= (length >> 2);
+ opcode |= ((offset >> 2) << LDST_OFFSET_SHIFT);
+ } else {
+ opcode |= length;
+ opcode |= (offset << LDST_OFFSET_SHIFT);
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* DECO CONTROL: skip writing pointer of imm data */
+ if (dst == DCTRL)
+ return (int)start_pc;
+
+ /*
+ * For data copy, 3 possible ways to specify how to copy data:
+ * - IMMED & !COPY: copy data directly from src( max 8 bytes)
+ * - IMMED & COPY: copy data imm from the location specified by user
+ * - !IMMED and is not SEQ cmd: copy the address
+ */
+ if (flags & IMMED)
+ __rta_inline_data(program, src, flags & __COPY_MASK, length);
+ else if (!(flags & SEQ))
+ __rta_out64(program, program->ps, src);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_LOAD_CMD_H__*/
diff --git a/drivers/common/dpaa2/flib/rta/math_cmd.h b/drivers/common/dpaa2/flib/rta/math_cmd.h
new file mode 100644
index 0000000..957c74c
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/math_cmd.h
@@ -0,0 +1,366 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_MATH_CMD_H__
+#define __RTA_MATH_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t math_op1[][2] = {
+/*1*/ { MATH0, MATH_SRC0_REG0 },
+ { MATH1, MATH_SRC0_REG1 },
+ { MATH2, MATH_SRC0_REG2 },
+ { MATH3, MATH_SRC0_REG3 },
+ { SEQINSZ, MATH_SRC0_SEQINLEN },
+ { SEQOUTSZ, MATH_SRC0_SEQOUTLEN },
+ { VSEQINSZ, MATH_SRC0_VARSEQINLEN },
+ { VSEQOUTSZ, MATH_SRC0_VARSEQOUTLEN },
+ { ZERO, MATH_SRC0_ZERO },
+/*10*/ { NONE, 0 }, /* dummy value */
+ { DPOVRD, MATH_SRC0_DPOVRD },
+ { ONE, MATH_SRC0_ONE }
+};
+
+/*
+ * Allowed MATH op1 sources for each SEC Era.
+ * Values represent the number of entries from math_op1[] that are supported.
+ */
+static const unsigned math_op1_sz[] = {10, 10, 12, 12, 12, 12, 12, 12};
+
+static const uint32_t math_op2[][2] = {
+/*1*/ { MATH0, MATH_SRC1_REG0 },
+ { MATH1, MATH_SRC1_REG1 },
+ { MATH2, MATH_SRC1_REG2 },
+ { MATH3, MATH_SRC1_REG3 },
+ { ABD, MATH_SRC1_INFIFO },
+ { OFIFO, MATH_SRC1_OUTFIFO },
+ { ONE, MATH_SRC1_ONE },
+/*8*/ { NONE, 0 }, /* dummy value */
+ { JOBSRC, MATH_SRC1_JOBSOURCE },
+ { DPOVRD, MATH_SRC1_DPOVRD },
+ { VSEQINSZ, MATH_SRC1_VARSEQINLEN },
+ { VSEQOUTSZ, MATH_SRC1_VARSEQOUTLEN },
+/*13*/ { ZERO, MATH_SRC1_ZERO }
+};
+
+/*
+ * Allowed MATH op2 sources for each SEC Era.
+ * Values represent the number of entries from math_op2[] that are supported.
+ */
+static const unsigned math_op2_sz[] = {8, 9, 13, 13, 13, 13, 13, 13};
+
+static const uint32_t math_result[][2] = {
+/*1*/ { MATH0, MATH_DEST_REG0 },
+ { MATH1, MATH_DEST_REG1 },
+ { MATH2, MATH_DEST_REG2 },
+ { MATH3, MATH_DEST_REG3 },
+ { SEQINSZ, MATH_DEST_SEQINLEN },
+ { SEQOUTSZ, MATH_DEST_SEQOUTLEN },
+ { VSEQINSZ, MATH_DEST_VARSEQINLEN },
+ { VSEQOUTSZ, MATH_DEST_VARSEQOUTLEN },
+/*9*/ { NONE, MATH_DEST_NONE },
+ { DPOVRD, MATH_DEST_DPOVRD }
+};
+
+/*
+ * Allowed MATH result destinations for each SEC Era.
+ * Values represent the number of entries from math_result[] that are
+ * supported.
+ */
+static const unsigned math_result_sz[] = {9, 9, 10, 10, 10, 10, 10, 10};
+
+static inline int rta_math(struct program *program, uint64_t operand1,
+ uint32_t op, uint64_t operand2, uint32_t result,
+ int length, uint32_t options)
+{
+ uint32_t opcode = CMD_MATH;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ unsigned start_pc = program->current_pc;
+
+ if (((op == MATH_FUN_BSWAP) && (rta_sec_era < RTA_SEC_ERA_4)) ||
+ ((op == MATH_FUN_ZBYT) && (rta_sec_era < RTA_SEC_ERA_2))) {
+ pr_err("MATH: operation not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if (options & SWP) {
+ if (rta_sec_era < RTA_SEC_ERA_7) {
+ pr_err("MATH: operation not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if ((options & IFB) ||
+ (!(options & IMMED) && !(options & IMMED2)) ||
+ ((options & IMMED) && (options & IMMED2))) {
+ pr_err("MATH: SWP - invalid configuration. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ }
+
+ /*
+ * SHLD operation is different from others and we
+ * assume that we can have _NONE as first operand
+ * or _SEQINSZ as second operand
+ */
+ if ((op != MATH_FUN_SHLD) && ((operand1 == NONE) ||
+ (operand2 == SEQINSZ))) {
+ pr_err("MATH: Invalid operand. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ /*
+ * We first check if it is unary operation. In that
+ * case second operand must be _NONE
+ */
+ if (((op == MATH_FUN_ZBYT) || (op == MATH_FUN_BSWAP)) &&
+ (operand2 != NONE)) {
+ pr_err("MATH: Invalid operand2. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ /* Write first operand field */
+ if (options & IMMED) {
+ opcode |= MATH_SRC0_IMM;
+ } else {
+ ret = __rta_map_opcode((uint32_t)operand1, math_op1,
+ math_op1_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MATH: operand1 not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+ }
+
+ /* Write second operand field */
+ if (options & IMMED2) {
+ opcode |= MATH_SRC1_IMM;
+ } else {
+ ret = __rta_map_opcode((uint32_t)operand2, math_op2,
+ math_op2_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MATH: operand2 not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+ }
+
+ /* Write result field */
+ ret = __rta_map_opcode(result, math_result, math_result_sz[rta_sec_era],
+ &val);
+ if (ret < 0) {
+ pr_err("MATH: result not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /*
+ * as we encode operations with their "real" values, we do not
+ * to translate but we do need to validate the value
+ */
+ switch (op) {
+ /*Binary operators */
+ case (MATH_FUN_ADD):
+ case (MATH_FUN_ADDC):
+ case (MATH_FUN_SUB):
+ case (MATH_FUN_SUBB):
+ case (MATH_FUN_OR):
+ case (MATH_FUN_AND):
+ case (MATH_FUN_XOR):
+ case (MATH_FUN_LSHIFT):
+ case (MATH_FUN_RSHIFT):
+ case (MATH_FUN_SHLD):
+ /* Unary operators */
+ case (MATH_FUN_ZBYT):
+ case (MATH_FUN_BSWAP):
+ opcode |= op;
+ break;
+ default:
+ pr_err("MATH: operator is not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ opcode |= (options & ~(IMMED | IMMED2));
+
+ /* Verify length */
+ switch (length) {
+ case (1):
+ opcode |= MATH_LEN_1BYTE;
+ break;
+ case (2):
+ opcode |= MATH_LEN_2BYTE;
+ break;
+ case (4):
+ opcode |= MATH_LEN_4BYTE;
+ break;
+ case (8):
+ opcode |= MATH_LEN_8BYTE;
+ break;
+ default:
+ pr_err("MATH: length is not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* Write immediate value */
+ if ((options & IMMED) && !(options & IMMED2)) {
+ __rta_out64(program, (length > 4) && !(options & IFB),
+ operand1);
+ } else if ((options & IMMED2) && !(options & IMMED)) {
+ __rta_out64(program, (length > 4) && !(options & IFB),
+ operand2);
+ } else if ((options & IMMED) && (options & IMMED2)) {
+ __rta_out32(program, lower_32_bits(operand1));
+ __rta_out32(program, lower_32_bits(operand2));
+ }
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int rta_mathi(struct program *program, uint64_t operand,
+ uint32_t op, uint8_t imm, uint32_t result,
+ int length, uint32_t options)
+{
+ uint32_t opcode = CMD_MATHI;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ unsigned start_pc = program->current_pc;
+
+ if (rta_sec_era < RTA_SEC_ERA_6) {
+ pr_err("MATHI: Command not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if (((op == MATH_FUN_FBYT) && (options & SSEL))) {
+ pr_err("MATHI: Illegal combination - FBYT and SSEL. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if ((options & SWP) && (rta_sec_era < RTA_SEC_ERA_7)) {
+ pr_err("MATHI: SWP not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ /* Write first operand field */
+ if (!(options & SSEL))
+ ret = __rta_map_opcode((uint32_t)operand, math_op1,
+ math_op1_sz[rta_sec_era], &val);
+ else
+ ret = __rta_map_opcode((uint32_t)operand, math_op2,
+ math_op2_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MATHI: operand not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if (!(options & SSEL))
+ opcode |= val;
+ else
+ opcode |= (val << (MATHI_SRC1_SHIFT - MATH_SRC1_SHIFT));
+
+ /* Write second operand field */
+ opcode |= (imm << MATHI_IMM_SHIFT);
+
+ /* Write result field */
+ ret = __rta_map_opcode(result, math_result, math_result_sz[rta_sec_era],
+ &val);
+ if (ret < 0) {
+ pr_err("MATHI: result not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= (val << (MATHI_DEST_SHIFT - MATH_DEST_SHIFT));
+
+ /*
+ * as we encode operations with their "real" values, we do not have to
+ * translate but we do need to validate the value
+ */
+ switch (op) {
+ case (MATH_FUN_ADD):
+ case (MATH_FUN_ADDC):
+ case (MATH_FUN_SUB):
+ case (MATH_FUN_SUBB):
+ case (MATH_FUN_OR):
+ case (MATH_FUN_AND):
+ case (MATH_FUN_XOR):
+ case (MATH_FUN_LSHIFT):
+ case (MATH_FUN_RSHIFT):
+ case (MATH_FUN_FBYT):
+ opcode |= op;
+ break;
+ default:
+ pr_err("MATHI: operator not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ opcode |= options;
+
+ /* Verify length */
+ switch (length) {
+ case (1):
+ opcode |= MATH_LEN_1BYTE;
+ break;
+ case (2):
+ opcode |= MATH_LEN_2BYTE;
+ break;
+ case (4):
+ opcode |= MATH_LEN_4BYTE;
+ break;
+ case (8):
+ opcode |= MATH_LEN_8BYTE;
+ break;
+ default:
+ pr_err("MATHI: length %d not supported. SEC PC: %d; Instr: %d\n",
+ length, program->current_pc,
+ program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_MATH_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/move_cmd.h b/drivers/common/dpaa2/flib/rta/move_cmd.h
new file mode 100644
index 0000000..ca013ef
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/move_cmd.h
@@ -0,0 +1,405 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_MOVE_CMD_H__
+#define __RTA_MOVE_CMD_H__
+
+#define MOVE_SET_AUX_SRC 0x01
+#define MOVE_SET_AUX_DST 0x02
+#define MOVE_SET_AUX_LS 0x03
+#define MOVE_SET_LEN_16b 0x04
+
+#define MOVE_SET_AUX_MATH 0x10
+#define MOVE_SET_AUX_MATH_SRC (MOVE_SET_AUX_SRC | MOVE_SET_AUX_MATH)
+#define MOVE_SET_AUX_MATH_DST (MOVE_SET_AUX_DST | MOVE_SET_AUX_MATH)
+
+#define MASK_16b 0xFF
+
+/* MOVE command type */
+#define __MOVE 1
+#define __MOVEB 2
+#define __MOVEDW 3
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t move_src_table[][2] = {
+/*1*/ { CONTEXT1, MOVE_SRC_CLASS1CTX },
+ { CONTEXT2, MOVE_SRC_CLASS2CTX },
+ { OFIFO, MOVE_SRC_OUTFIFO },
+ { DESCBUF, MOVE_SRC_DESCBUF },
+ { MATH0, MOVE_SRC_MATH0 },
+ { MATH1, MOVE_SRC_MATH1 },
+ { MATH2, MOVE_SRC_MATH2 },
+ { MATH3, MOVE_SRC_MATH3 },
+/*9*/ { IFIFOABD, MOVE_SRC_INFIFO },
+ { IFIFOAB1, MOVE_SRC_INFIFO_CL | MOVE_AUX_LS },
+ { IFIFOAB2, MOVE_SRC_INFIFO_CL },
+/*12*/ { ABD, MOVE_SRC_INFIFO_NO_NFIFO },
+ { AB1, MOVE_SRC_INFIFO_NO_NFIFO | MOVE_AUX_LS },
+ { AB2, MOVE_SRC_INFIFO_NO_NFIFO | MOVE_AUX_MS }
+};
+
+/* Allowed MOVE / MOVE_LEN sources for each SEC Era.
+ * Values represent the number of entries from move_src_table[] that are
+ * supported.
+ */
+static const unsigned move_src_table_sz[] = {9, 11, 14, 14, 14, 14, 14, 14};
+
+static const uint32_t move_dst_table[][2] = {
+/*1*/ { CONTEXT1, MOVE_DEST_CLASS1CTX },
+ { CONTEXT2, MOVE_DEST_CLASS2CTX },
+ { OFIFO, MOVE_DEST_OUTFIFO },
+ { DESCBUF, MOVE_DEST_DESCBUF },
+ { MATH0, MOVE_DEST_MATH0 },
+ { MATH1, MOVE_DEST_MATH1 },
+ { MATH2, MOVE_DEST_MATH2 },
+ { MATH3, MOVE_DEST_MATH3 },
+ { IFIFOAB1, MOVE_DEST_CLASS1INFIFO },
+ { IFIFOAB2, MOVE_DEST_CLASS2INFIFO },
+ { PKA, MOVE_DEST_PK_A },
+ { KEY1, MOVE_DEST_CLASS1KEY },
+ { KEY2, MOVE_DEST_CLASS2KEY },
+/*14*/ { IFIFO, MOVE_DEST_INFIFO },
+/*15*/ { ALTSOURCE, MOVE_DEST_ALTSOURCE}
+};
+
+/* Allowed MOVE / MOVE_LEN destinations for each SEC Era.
+ * Values represent the number of entries from move_dst_table[] that are
+ * supported.
+ */
+static const unsigned move_dst_table_sz[] = {13, 14, 14, 15, 15, 15, 15, 15};
+
+static inline int set_move_offset(struct program *program __maybe_unused,
+ uint64_t src, uint16_t src_offset,
+ uint64_t dst, uint16_t dst_offset,
+ uint16_t *offset, uint16_t *opt);
+
+static inline int math_offset(uint16_t offset);
+
+static inline int rta_move(struct program *program, int cmd_type, uint64_t src,
+ uint16_t src_offset, uint64_t dst,
+ uint16_t dst_offset, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ uint16_t offset = 0, opt = 0;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ bool is_move_len_cmd = false;
+ unsigned start_pc = program->current_pc;
+
+ if ((rta_sec_era < RTA_SEC_ERA_7) && (cmd_type != __MOVE)) {
+ pr_err("MOVE: MOVEB / MOVEDW not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ /* write command type */
+ if (cmd_type == __MOVEB) {
+ opcode = CMD_MOVEB;
+ } else if (cmd_type == __MOVEDW) {
+ opcode = CMD_MOVEDW;
+ } else if (!(flags & IMMED)) {
+ if (rta_sec_era < RTA_SEC_ERA_3) {
+ pr_err("MOVE: MOVE_LEN not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if ((length != MATH0) && (length != MATH1) &&
+ (length != MATH2) && (length != MATH3)) {
+ pr_err("MOVE: MOVE_LEN length must be MATH[0-3]. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ opcode = CMD_MOVE_LEN;
+ is_move_len_cmd = true;
+ } else {
+ opcode = CMD_MOVE;
+ }
+
+ /* write offset first, to check for invalid combinations or incorrect
+ * offset values sooner; decide which offset should be here
+ * (src or dst)
+ */
+ ret = set_move_offset(program, src, src_offset, dst, dst_offset,
+ &offset, &opt);
+ if (ret < 0)
+ goto err;
+
+ opcode |= (offset << MOVE_OFFSET_SHIFT) & MOVE_OFFSET_MASK;
+
+ /* set AUX field if required */
+ if (opt == MOVE_SET_AUX_SRC) {
+ opcode |= ((src_offset / 16) << MOVE_AUX_SHIFT) & MOVE_AUX_MASK;
+ } else if (opt == MOVE_SET_AUX_DST) {
+ opcode |= ((dst_offset / 16) << MOVE_AUX_SHIFT) & MOVE_AUX_MASK;
+ } else if (opt == MOVE_SET_AUX_LS) {
+ opcode |= MOVE_AUX_LS;
+ } else if (opt & MOVE_SET_AUX_MATH) {
+ if (opt & MOVE_SET_AUX_SRC)
+ offset = src_offset;
+ else
+ offset = dst_offset;
+
+ if (rta_sec_era < RTA_SEC_ERA_6) {
+ if (offset)
+ pr_debug("MOVE: Offset not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era),
+ program->current_pc,
+ program->current_instruction);
+ /* nothing to do for offset = 0 */
+ } else {
+ ret = math_offset(offset);
+ if (ret < 0) {
+ pr_err("MOVE: Invalid offset in MATH register. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ opcode |= (uint32_t)ret;
+ }
+ }
+
+ /* write source field */
+ ret = __rta_map_opcode((uint32_t)src, move_src_table,
+ move_src_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MOVE: Invalid SRC. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write destination field */
+ ret = __rta_map_opcode((uint32_t)dst, move_dst_table,
+ move_dst_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MOVE: Invalid DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write flags */
+ if (flags & (FLUSH1 | FLUSH2))
+ opcode |= MOVE_AUX_MS;
+ if (flags & (LAST2 | LAST1))
+ opcode |= MOVE_AUX_LS;
+ if (flags & WAITCOMP)
+ opcode |= MOVE_WAITCOMP;
+
+ if (!is_move_len_cmd) {
+ /* write length */
+ if (opt == MOVE_SET_LEN_16b)
+ opcode |= (length & (MOVE_OFFSET_MASK | MOVE_LEN_MASK));
+ else
+ opcode |= (length & MOVE_LEN_MASK);
+ } else {
+ /* write mrsel */
+ switch (length) {
+ case (MATH0):
+ /*
+ * opcode |= MOVELEN_MRSEL_MATH0;
+ * MOVELEN_MRSEL_MATH0 is 0
+ */
+ break;
+ case (MATH1):
+ opcode |= MOVELEN_MRSEL_MATH1;
+ break;
+ case (MATH2):
+ opcode |= MOVELEN_MRSEL_MATH2;
+ break;
+ case (MATH3):
+ opcode |= MOVELEN_MRSEL_MATH3;
+ break;
+ }
+
+ /* write size */
+ if (rta_sec_era >= RTA_SEC_ERA_7) {
+ if (flags & SIZE_WORD)
+ opcode |= MOVELEN_SIZE_WORD;
+ else if (flags & SIZE_BYTE)
+ opcode |= MOVELEN_SIZE_BYTE;
+ else if (flags & SIZE_DWORD)
+ opcode |= MOVELEN_SIZE_DWORD;
+ }
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int set_move_offset(struct program *program __maybe_unused,
+ uint64_t src, uint16_t src_offset,
+ uint64_t dst, uint16_t dst_offset,
+ uint16_t *offset, uint16_t *opt)
+{
+ switch (src) {
+ case (CONTEXT1):
+ case (CONTEXT2):
+ if (dst == DESCBUF) {
+ *opt = MOVE_SET_AUX_SRC;
+ *offset = dst_offset;
+ } else if ((dst == KEY1) || (dst == KEY2)) {
+ if ((src_offset) && (dst_offset)) {
+ pr_err("MOVE: Bad offset. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if (dst_offset) {
+ *opt = MOVE_SET_AUX_LS;
+ *offset = dst_offset;
+ } else {
+ *offset = src_offset;
+ }
+ } else {
+ if ((dst == MATH0) || (dst == MATH1) ||
+ (dst == MATH2) || (dst == MATH3)) {
+ *opt = MOVE_SET_AUX_MATH_DST;
+ } else if (((dst == OFIFO) || (dst == ALTSOURCE)) &&
+ (src_offset % 4)) {
+ pr_err("MOVE: Bad offset alignment. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ *offset = src_offset;
+ }
+ break;
+
+ case (OFIFO):
+ if (dst == OFIFO) {
+ pr_err("MOVE: Invalid DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if (((dst == IFIFOAB1) || (dst == IFIFOAB2) ||
+ (dst == IFIFO) || (dst == PKA)) &&
+ (src_offset || dst_offset)) {
+ pr_err("MOVE: Offset should be zero. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ *offset = dst_offset;
+ break;
+
+ case (DESCBUF):
+ if ((dst == CONTEXT1) || (dst == CONTEXT2)) {
+ *opt = MOVE_SET_AUX_DST;
+ } else if ((dst == MATH0) || (dst == MATH1) ||
+ (dst == MATH2) || (dst == MATH3)) {
+ *opt = MOVE_SET_AUX_MATH_DST;
+ } else if (dst == DESCBUF) {
+ pr_err("MOVE: Invalid DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ } else if (((dst == OFIFO) || (dst == ALTSOURCE)) &&
+ (src_offset % 4)) {
+ pr_err("MOVE: Invalid offset alignment. SEC PC: %d; Instr %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ *offset = src_offset;
+ break;
+
+ case (MATH0):
+ case (MATH1):
+ case (MATH2):
+ case (MATH3):
+ if ((dst == OFIFO) || (dst == ALTSOURCE)) {
+ if (src_offset % 4) {
+ pr_err("MOVE: Bad offset alignment. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ *offset = src_offset;
+ } else if ((dst == IFIFOAB1) || (dst == IFIFOAB2) ||
+ (dst == IFIFO) || (dst == PKA)) {
+ *offset = src_offset;
+ } else {
+ *offset = dst_offset;
+
+ /*
+ * This condition is basically the negation of:
+ * dst in { CONTEXT[1-2], MATH[0-3] }
+ */
+ if ((dst != KEY1) && (dst != KEY2))
+ *opt = MOVE_SET_AUX_MATH_SRC;
+ }
+ break;
+
+ case (IFIFOABD):
+ case (IFIFOAB1):
+ case (IFIFOAB2):
+ case (ABD):
+ case (AB1):
+ case (AB2):
+ if ((dst == IFIFOAB1) || (dst == IFIFOAB2) ||
+ (dst == IFIFO) || (dst == PKA) || (dst == ALTSOURCE)) {
+ pr_err("MOVE: Bad DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ } else {
+ if (dst == OFIFO) {
+ *opt = MOVE_SET_LEN_16b;
+ } else {
+ if (dst_offset % 4) {
+ pr_err("MOVE: Bad offset alignment. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ *offset = dst_offset;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+ err:
+ return -EINVAL;
+}
+
+static inline int math_offset(uint16_t offset)
+{
+ switch (offset) {
+ case 0:
+ return 0;
+ case 4:
+ return MOVE_AUX_LS;
+ case 6:
+ return MOVE_AUX_MS;
+ case 7:
+ return MOVE_AUX_LS | MOVE_AUX_MS;
+ }
+
+ return -EINVAL;
+}
+
+#endif /* __RTA_MOVE_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/nfifo_cmd.h b/drivers/common/dpaa2/flib/rta/nfifo_cmd.h
new file mode 100644
index 0000000..e2aa675
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/nfifo_cmd.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_NFIFO_CMD_H__
+#define __RTA_NFIFO_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t nfifo_src[][2] = {
+/*1*/ { IFIFO, NFIFOENTRY_STYPE_DFIFO },
+ { OFIFO, NFIFOENTRY_STYPE_OFIFO },
+ { PAD, NFIFOENTRY_STYPE_PAD },
+/*4*/ { MSGOUTSNOOP, NFIFOENTRY_STYPE_SNOOP | NFIFOENTRY_DEST_BOTH },
+/*5*/ { ALTSOURCE, NFIFOENTRY_STYPE_ALTSOURCE },
+ { OFIFO_SYNC, NFIFOENTRY_STYPE_OFIFO_SYNC },
+/*7*/ { MSGOUTSNOOP_ALT, NFIFOENTRY_STYPE_SNOOP_ALT | NFIFOENTRY_DEST_BOTH }
+};
+
+/*
+ * Allowed NFIFO LOAD sources for each SEC Era.
+ * Values represent the number of entries from nfifo_src[] that are supported.
+ */
+static const unsigned nfifo_src_sz[] = {4, 5, 5, 5, 5, 5, 5, 7};
+
+static const uint32_t nfifo_data[][2] = {
+ { MSG, NFIFOENTRY_DTYPE_MSG },
+ { MSG1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_MSG },
+ { MSG2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_MSG },
+ { IV1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_IV },
+ { IV2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_IV },
+ { ICV1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_ICV },
+ { ICV2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_ICV },
+ { SAD1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_SAD },
+ { AAD1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_AAD },
+ { AAD2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_AAD },
+ { AFHA_SBOX, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_SBOX },
+ { SKIP, NFIFOENTRY_DTYPE_SKIP },
+ { PKE, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_E },
+ { PKN, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_N },
+ { PKA, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A },
+ { PKA0, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A0 },
+ { PKA1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A1 },
+ { PKA2, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A2 },
+ { PKA3, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A3 },
+ { PKB, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B },
+ { PKB0, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B0 },
+ { PKB1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B1 },
+ { PKB2, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B2 },
+ { PKB3, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B3 },
+ { AB1, NFIFOENTRY_DEST_CLASS1 },
+ { AB2, NFIFOENTRY_DEST_CLASS2 },
+ { ABD, NFIFOENTRY_DEST_DECO }
+};
+
+static const uint32_t nfifo_flags[][2] = {
+/*1*/ { LAST1, NFIFOENTRY_LC1 },
+ { LAST2, NFIFOENTRY_LC2 },
+ { FLUSH1, NFIFOENTRY_FC1 },
+ { BP, NFIFOENTRY_BND },
+ { PAD_ZERO, NFIFOENTRY_PTYPE_ZEROS },
+ { PAD_NONZERO, NFIFOENTRY_PTYPE_RND_NOZEROS },
+ { PAD_INCREMENT, NFIFOENTRY_PTYPE_INCREMENT },
+ { PAD_RANDOM, NFIFOENTRY_PTYPE_RND },
+ { PAD_ZERO_N1, NFIFOENTRY_PTYPE_ZEROS_NZ },
+ { PAD_NONZERO_0, NFIFOENTRY_PTYPE_RND_NZ_LZ },
+ { PAD_N1, NFIFOENTRY_PTYPE_N },
+/*12*/ { PAD_NONZERO_N, NFIFOENTRY_PTYPE_RND_NZ_N },
+ { FLUSH2, NFIFOENTRY_FC2 },
+ { OC, NFIFOENTRY_OC }
+};
+
+/*
+ * Allowed NFIFO LOAD flags for each SEC Era.
+ * Values represent the number of entries from nfifo_flags[] that are supported.
+ */
+static const unsigned nfifo_flags_sz[] = {12, 14, 14, 14, 14, 14, 14, 14};
+
+static const uint32_t nfifo_pad_flags[][2] = {
+ { BM, NFIFOENTRY_BM },
+ { PS, NFIFOENTRY_PS },
+ { PR, NFIFOENTRY_PR }
+};
+
+/*
+ * Allowed NFIFO LOAD pad flags for each SEC Era.
+ * Values represent the number of entries from nfifo_pad_flags[] that are
+ * supported.
+ */
+static const unsigned nfifo_pad_flags_sz[] = {2, 2, 2, 2, 3, 3, 3, 3};
+
+static inline int rta_nfifo_load(struct program *program, uint32_t src,
+ uint32_t data, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0, val;
+ int ret = -EINVAL;
+ uint32_t load_cmd = CMD_LOAD | LDST_IMM | LDST_CLASS_IND_CCB |
+ LDST_SRCDST_WORD_INFO_FIFO;
+ unsigned start_pc = program->current_pc;
+
+ if ((data == AFHA_SBOX) && (rta_sec_era == RTA_SEC_ERA_7)) {
+ pr_err("NFIFO: AFHA S-box not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ /* write source field */
+ ret = __rta_map_opcode(src, nfifo_src, nfifo_src_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("NFIFO: Invalid SRC. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write type field */
+ ret = __rta_map_opcode(data, nfifo_data, ARRAY_SIZE(nfifo_data), &val);
+ if (ret < 0) {
+ pr_err("NFIFO: Invalid data. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write DL field */
+ if (!(flags & EXT)) {
+ opcode |= length & NFIFOENTRY_DLEN_MASK;
+ load_cmd |= 4;
+ } else {
+ load_cmd |= 8;
+ }
+
+ /* write flags */
+ __rta_map_flags(flags, nfifo_flags, nfifo_flags_sz[rta_sec_era],
+ &opcode);
+
+ /* in case of padding, check the destination */
+ if (src == PAD)
+ __rta_map_flags(flags, nfifo_pad_flags,
+ nfifo_pad_flags_sz[rta_sec_era], &opcode);
+
+ /* write LOAD command first */
+ __rta_out32(program, load_cmd);
+ __rta_out32(program, opcode);
+
+ if (flags & EXT)
+ __rta_out32(program, length & NFIFOENTRY_DLEN_MASK);
+
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_NFIFO_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/operation_cmd.h b/drivers/common/dpaa2/flib/rta/operation_cmd.h
new file mode 100644
index 0000000..3560352
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/operation_cmd.h
@@ -0,0 +1,549 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_OPERATION_CMD_H__
+#define __RTA_OPERATION_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static inline int __rta_alg_aai_aes(uint16_t aai)
+{
+ uint16_t aes_mode = aai & OP_ALG_AESA_MODE_MASK;
+
+ if (aai & OP_ALG_AAI_C2K) {
+ if (rta_sec_era < RTA_SEC_ERA_5)
+ return -1;
+ if ((aes_mode != OP_ALG_AAI_CCM) &&
+ (aes_mode != OP_ALG_AAI_GCM))
+ return -EINVAL;
+ }
+
+ switch (aes_mode) {
+ case OP_ALG_AAI_CBC_CMAC:
+ case OP_ALG_AAI_CTR_CMAC_LTE:
+ case OP_ALG_AAI_CTR_CMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_ALG_AAI_CTR:
+ case OP_ALG_AAI_CBC:
+ case OP_ALG_AAI_ECB:
+ case OP_ALG_AAI_OFB:
+ case OP_ALG_AAI_CFB:
+ case OP_ALG_AAI_XTS:
+ case OP_ALG_AAI_CMAC:
+ case OP_ALG_AAI_XCBC_MAC:
+ case OP_ALG_AAI_CCM:
+ case OP_ALG_AAI_GCM:
+ case OP_ALG_AAI_CBC_XCBCMAC:
+ case OP_ALG_AAI_CTR_XCBCMAC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_des(uint16_t aai)
+{
+ uint16_t aai_code = (uint16_t)(aai & ~OP_ALG_AAI_CHECKODD);
+
+ switch (aai_code) {
+ case OP_ALG_AAI_CBC:
+ case OP_ALG_AAI_ECB:
+ case OP_ALG_AAI_CFB:
+ case OP_ALG_AAI_OFB:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_md5(uint16_t aai)
+{
+ switch (aai) {
+ case OP_ALG_AAI_HMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_ALG_AAI_SMAC:
+ case OP_ALG_AAI_HASH:
+ case OP_ALG_AAI_HMAC_PRECOMP:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_sha(uint16_t aai)
+{
+ switch (aai) {
+ case OP_ALG_AAI_HMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_ALG_AAI_HASH:
+ case OP_ALG_AAI_HMAC_PRECOMP:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_rng(uint16_t aai)
+{
+ uint16_t rng_mode = aai & OP_ALG_RNG_MODE_MASK;
+ uint16_t rng_sh = aai & OP_ALG_AAI_RNG4_SH_MASK;
+
+ switch (rng_mode) {
+ case OP_ALG_AAI_RNG:
+ case OP_ALG_AAI_RNG_NZB:
+ case OP_ALG_AAI_RNG_OBP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* State Handle bits are valid only for SEC Era >= 5 */
+ if ((rta_sec_era < RTA_SEC_ERA_5) && rng_sh)
+ return -EINVAL;
+
+ /* PS, AI, SK bits are also valid only for SEC Era >= 5 */
+ if ((rta_sec_era < RTA_SEC_ERA_5) && (aai &
+ (OP_ALG_AAI_RNG4_PS | OP_ALG_AAI_RNG4_AI | OP_ALG_AAI_RNG4_SK)))
+ return -EINVAL;
+
+ switch (rng_sh) {
+ case OP_ALG_AAI_RNG4_SH_0:
+ case OP_ALG_AAI_RNG4_SH_1:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_crc(uint16_t aai)
+{
+ uint16_t aai_code = aai & OP_ALG_CRC_POLY_MASK;
+
+ switch (aai_code) {
+ case OP_ALG_AAI_802:
+ case OP_ALG_AAI_3385:
+ case OP_ALG_AAI_CUST_POLY:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_kasumi(uint16_t aai)
+{
+ switch (aai) {
+ case OP_ALG_AAI_GSM:
+ case OP_ALG_AAI_EDGE:
+ case OP_ALG_AAI_F8:
+ case OP_ALG_AAI_F9:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_snow_f9(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F9)
+ return 0;
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_snow_f8(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F8)
+ return 0;
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_zuce(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F8)
+ return 0;
+
+ return -EINVAL;
+}
+
+static inline int __rta_alg_aai_zuca(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F9)
+ return 0;
+
+ return -EINVAL;
+}
+
+struct alg_aai_map {
+ uint32_t chipher_algo;
+ int (*aai_func)(uint16_t);
+ uint32_t class;
+};
+
+static const struct alg_aai_map alg_table[] = {
+/*1*/ { OP_ALG_ALGSEL_AES, __rta_alg_aai_aes, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_DES, __rta_alg_aai_des, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_3DES, __rta_alg_aai_des, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_MD5, __rta_alg_aai_md5, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA1, __rta_alg_aai_md5, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA224, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA256, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA384, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA512, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_RNG, __rta_alg_aai_rng, OP_TYPE_CLASS1_ALG },
+/*11*/ { OP_ALG_ALGSEL_CRC, __rta_alg_aai_crc, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_ARC4, NULL, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_SNOW_F8, __rta_alg_aai_snow_f8, OP_TYPE_CLASS1_ALG },
+/*14*/ { OP_ALG_ALGSEL_KASUMI, __rta_alg_aai_kasumi, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_SNOW_F9, __rta_alg_aai_snow_f9, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_ZUCE, __rta_alg_aai_zuce, OP_TYPE_CLASS1_ALG },
+/*17*/ { OP_ALG_ALGSEL_ZUCA, __rta_alg_aai_zuca, OP_TYPE_CLASS2_ALG }
+};
+
+/*
+ * Allowed OPERATION algorithms for each SEC Era.
+ * Values represent the number of entries from alg_table[] that are supported.
+ */
+static const unsigned alg_table_sz[] = {14, 15, 15, 15, 17, 17, 11, 17};
+
+static inline int rta_operation(struct program *program, uint32_t cipher_algo,
+ uint16_t aai, uint8_t algo_state,
+ int icv_checking, int enc)
+{
+ uint32_t opcode = CMD_OPERATION;
+ unsigned i, found = 0;
+ unsigned start_pc = program->current_pc;
+ int ret;
+
+ for (i = 0; i < alg_table_sz[rta_sec_era]; i++) {
+ if (alg_table[i].chipher_algo == cipher_algo) {
+ opcode |= cipher_algo | alg_table[i].class;
+ /* nothing else to verify */
+ if (alg_table[i].aai_func == NULL) {
+ found = 1;
+ break;
+ }
+
+ aai &= OP_ALG_AAI_MASK;
+
+ ret = (*alg_table[i].aai_func)(aai);
+ if (ret < 0) {
+ pr_err("OPERATION: Bad AAI Type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= aai;
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ pr_err("OPERATION: Invalid Command. SEC Program Line: %d\n",
+ program->current_pc);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (algo_state) {
+ case OP_ALG_AS_UPDATE:
+ case OP_ALG_AS_INIT:
+ case OP_ALG_AS_FINALIZE:
+ case OP_ALG_AS_INITFINAL:
+ opcode |= algo_state;
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (icv_checking) {
+ case ICV_CHECK_DISABLE:
+ /*
+ * opcode |= OP_ALG_ICV_OFF;
+ * OP_ALG_ICV_OFF is 0
+ */
+ break;
+ case ICV_CHECK_ENABLE:
+ opcode |= OP_ALG_ICV_ON;
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (enc) {
+ case DIR_DEC:
+ /*
+ * opcode |= OP_ALG_DECRYPT;
+ * OP_ALG_DECRYPT is 0
+ */
+ break;
+ case DIR_ENC:
+ opcode |= OP_ALG_ENCRYPT;
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ return ret;
+}
+
+/*
+ * OPERATION PKHA routines
+ */
+static inline int __rta_pkha_clearmem(uint32_t pkha_op)
+{
+ switch (pkha_op) {
+ case (OP_ALG_PKMODE_CLEARMEM_ALL):
+ case (OP_ALG_PKMODE_CLEARMEM_ABE):
+ case (OP_ALG_PKMODE_CLEARMEM_ABN):
+ case (OP_ALG_PKMODE_CLEARMEM_AB):
+ case (OP_ALG_PKMODE_CLEARMEM_AEN):
+ case (OP_ALG_PKMODE_CLEARMEM_AE):
+ case (OP_ALG_PKMODE_CLEARMEM_AN):
+ case (OP_ALG_PKMODE_CLEARMEM_A):
+ case (OP_ALG_PKMODE_CLEARMEM_BEN):
+ case (OP_ALG_PKMODE_CLEARMEM_BE):
+ case (OP_ALG_PKMODE_CLEARMEM_BN):
+ case (OP_ALG_PKMODE_CLEARMEM_B):
+ case (OP_ALG_PKMODE_CLEARMEM_EN):
+ case (OP_ALG_PKMODE_CLEARMEM_N):
+ case (OP_ALG_PKMODE_CLEARMEM_E):
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_pkha_mod_arithmetic(uint32_t pkha_op)
+{
+ pkha_op &= (uint32_t)~OP_ALG_PKMODE_OUT_A;
+
+ switch (pkha_op) {
+ case (OP_ALG_PKMODE_MOD_ADD):
+ case (OP_ALG_PKMODE_MOD_SUB_AB):
+ case (OP_ALG_PKMODE_MOD_SUB_BA):
+ case (OP_ALG_PKMODE_MOD_MULT):
+ case (OP_ALG_PKMODE_MOD_MULT_IM):
+ case (OP_ALG_PKMODE_MOD_MULT_IM_OM):
+ case (OP_ALG_PKMODE_MOD_EXPO):
+ case (OP_ALG_PKMODE_MOD_EXPO_TEQ):
+ case (OP_ALG_PKMODE_MOD_EXPO_IM):
+ case (OP_ALG_PKMODE_MOD_EXPO_IM_TEQ):
+ case (OP_ALG_PKMODE_MOD_REDUCT):
+ case (OP_ALG_PKMODE_MOD_INV):
+ case (OP_ALG_PKMODE_MOD_MONT_CNST):
+ case (OP_ALG_PKMODE_MOD_CRT_CNST):
+ case (OP_ALG_PKMODE_MOD_GCD):
+ case (OP_ALG_PKMODE_MOD_PRIMALITY):
+ case (OP_ALG_PKMODE_MOD_SML_EXP):
+ case (OP_ALG_PKMODE_F2M_ADD):
+ case (OP_ALG_PKMODE_F2M_MUL):
+ case (OP_ALG_PKMODE_F2M_MUL_IM):
+ case (OP_ALG_PKMODE_F2M_MUL_IM_OM):
+ case (OP_ALG_PKMODE_F2M_EXP):
+ case (OP_ALG_PKMODE_F2M_EXP_TEQ):
+ case (OP_ALG_PKMODE_F2M_AMODN):
+ case (OP_ALG_PKMODE_F2M_INV):
+ case (OP_ALG_PKMODE_F2M_R2):
+ case (OP_ALG_PKMODE_F2M_GCD):
+ case (OP_ALG_PKMODE_F2M_SML_EXP):
+ case (OP_ALG_PKMODE_ECC_F2M_ADD):
+ case (OP_ALG_PKMODE_ECC_F2M_ADD_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_F2M_DBL):
+ case (OP_ALG_PKMODE_ECC_F2M_DBL_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_TEQ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2_TEQ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2_PROJ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2_PROJ_TEQ):
+ case (OP_ALG_PKMODE_ECC_MOD_ADD):
+ case (OP_ALG_PKMODE_ECC_MOD_ADD_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_MOD_DBL):
+ case (OP_ALG_PKMODE_ECC_MOD_DBL_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_TEQ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2_TEQ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2_PROJ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2_PROJ_TEQ):
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_pkha_copymem(uint32_t pkha_op)
+{
+ switch (pkha_op) {
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A_E):
+ case (OP_ALG_PKMODE_COPY_NSZ_A_N):
+ case (OP_ALG_PKMODE_COPY_NSZ_B_E):
+ case (OP_ALG_PKMODE_COPY_NSZ_B_N):
+ case (OP_ALG_PKMODE_COPY_NSZ_N_A):
+ case (OP_ALG_PKMODE_COPY_NSZ_N_B):
+ case (OP_ALG_PKMODE_COPY_NSZ_N_E):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A_E):
+ case (OP_ALG_PKMODE_COPY_SSZ_A_N):
+ case (OP_ALG_PKMODE_COPY_SSZ_B_E):
+ case (OP_ALG_PKMODE_COPY_SSZ_B_N):
+ case (OP_ALG_PKMODE_COPY_SSZ_N_A):
+ case (OP_ALG_PKMODE_COPY_SSZ_N_B):
+ case (OP_ALG_PKMODE_COPY_SSZ_N_E):
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int rta_pkha_operation(struct program *program, uint32_t op_pkha)
+{
+ uint32_t opcode = CMD_OPERATION | OP_TYPE_PK | OP_ALG_PK;
+ uint32_t pkha_func;
+ unsigned start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ pkha_func = op_pkha & OP_ALG_PK_FUN_MASK;
+
+ switch (pkha_func) {
+ case (OP_ALG_PKMODE_CLEARMEM):
+ ret = __rta_pkha_clearmem(op_pkha);
+ if (ret < 0) {
+ pr_err("OPERATION PKHA: Type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ break;
+ case (OP_ALG_PKMODE_MOD_ADD):
+ case (OP_ALG_PKMODE_MOD_SUB_AB):
+ case (OP_ALG_PKMODE_MOD_SUB_BA):
+ case (OP_ALG_PKMODE_MOD_MULT):
+ case (OP_ALG_PKMODE_MOD_EXPO):
+ case (OP_ALG_PKMODE_MOD_REDUCT):
+ case (OP_ALG_PKMODE_MOD_INV):
+ case (OP_ALG_PKMODE_MOD_MONT_CNST):
+ case (OP_ALG_PKMODE_MOD_CRT_CNST):
+ case (OP_ALG_PKMODE_MOD_GCD):
+ case (OP_ALG_PKMODE_MOD_PRIMALITY):
+ case (OP_ALG_PKMODE_MOD_SML_EXP):
+ case (OP_ALG_PKMODE_ECC_MOD_ADD):
+ case (OP_ALG_PKMODE_ECC_MOD_DBL):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL):
+ ret = __rta_pkha_mod_arithmetic(op_pkha);
+ if (ret < 0) {
+ pr_err("OPERATION PKHA: Type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ break;
+ case (OP_ALG_PKMODE_COPY_NSZ):
+ case (OP_ALG_PKMODE_COPY_SSZ):
+ ret = __rta_pkha_copymem(op_pkha);
+ if (ret < 0) {
+ pr_err("OPERATION PKHA: Type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ goto err;
+ }
+
+ opcode |= op_pkha;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_OPERATION_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/protocol_cmd.h b/drivers/common/dpaa2/flib/rta/protocol_cmd.h
new file mode 100644
index 0000000..1486e2c
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/protocol_cmd.h
@@ -0,0 +1,680 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_PROTOCOL_CMD_H__
+#define __RTA_PROTOCOL_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static inline int __rta_ssl_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_SSL30_RC4_40_MD5_2:
+ case OP_PCL_SSL30_RC4_128_MD5_2:
+ case OP_PCL_SSL30_RC4_128_SHA_5:
+ case OP_PCL_SSL30_RC4_40_MD5_3:
+ case OP_PCL_SSL30_RC4_128_MD5_3:
+ case OP_PCL_SSL30_RC4_128_SHA:
+ case OP_PCL_SSL30_RC4_128_MD5:
+ case OP_PCL_SSL30_RC4_40_SHA:
+ case OP_PCL_SSL30_RC4_40_MD5:
+ case OP_PCL_SSL30_RC4_128_SHA_2:
+ case OP_PCL_SSL30_RC4_128_SHA_3:
+ case OP_PCL_SSL30_RC4_128_SHA_4:
+ case OP_PCL_SSL30_RC4_128_SHA_6:
+ case OP_PCL_SSL30_RC4_128_SHA_7:
+ case OP_PCL_SSL30_RC4_128_SHA_8:
+ case OP_PCL_SSL30_RC4_128_SHA_9:
+ case OP_PCL_SSL30_RC4_128_SHA_10:
+ case OP_PCL_TLS_ECDHE_PSK_RC4_128_SHA:
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+ /* fall through if not Era 7 */
+ case OP_PCL_SSL30_DES40_CBC_SHA:
+ case OP_PCL_SSL30_DES_CBC_SHA_2:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_5:
+ case OP_PCL_SSL30_DES40_CBC_SHA_2:
+ case OP_PCL_SSL30_DES_CBC_SHA_3:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_6:
+ case OP_PCL_SSL30_DES40_CBC_SHA_3:
+ case OP_PCL_SSL30_DES_CBC_SHA_4:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_7:
+ case OP_PCL_SSL30_DES40_CBC_SHA_4:
+ case OP_PCL_SSL30_DES_CBC_SHA_5:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_8:
+ case OP_PCL_SSL30_DES40_CBC_SHA_5:
+ case OP_PCL_SSL30_DES_CBC_SHA_6:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_9:
+ case OP_PCL_SSL30_DES40_CBC_SHA_6:
+ case OP_PCL_SSL30_DES_CBC_SHA_7:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_10:
+ case OP_PCL_SSL30_DES_CBC_SHA:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA:
+ case OP_PCL_SSL30_DES_CBC_MD5:
+ case OP_PCL_SSL30_3DES_EDE_CBC_MD5:
+ case OP_PCL_SSL30_DES40_CBC_SHA_7:
+ case OP_PCL_SSL30_DES40_CBC_MD5:
+ case OP_PCL_SSL30_AES_128_CBC_SHA:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_2:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_3:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_4:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_5:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_6:
+ case OP_PCL_SSL30_AES_256_CBC_SHA:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_2:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_3:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_4:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_5:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_6:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_2:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_3:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_4:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_5:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_2:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_3:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_4:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_5:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_6:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_6:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_2:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_7:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_7:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_3:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_8:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_8:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_4:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_9:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_9:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_1:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_1:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_2:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_2:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_3:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_3:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_4:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_4:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_5:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_5:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_6:
+ case OP_PCL_TLS_DH_ANON_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_PSK_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_PSK_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_DHE_PSK_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_DHE_PSK_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_RSA_PSK_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_RSA_PSK_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_DHE_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_DHE_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_RSA_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_RSA_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_11:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_10:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_10:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_12:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_11:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_11:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_12:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_13:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_12:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_14:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_13:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_13:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_15:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_14:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_14:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_16:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_17:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_18:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_15:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_16:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_17:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_15:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_16:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_17:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDHE_RSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDHE_RSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDH_RSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDH_RSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDHE_RSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDHE_RSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDH_RSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDH_RSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDHE_PSK_3DES_EDE_CBC_SHA:
+ case OP_PCL_TLS_ECDHE_PSK_AES_128_CBC_SHA:
+ case OP_PCL_TLS_ECDHE_PSK_AES_256_CBC_SHA:
+ case OP_PCL_TLS_ECDHE_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDHE_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_TLS12_3DES_EDE_CBC_MD5:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA160:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA224:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA256:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA384:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA512:
+ case OP_PCL_TLS12_AES_128_CBC_SHA160:
+ case OP_PCL_TLS12_AES_128_CBC_SHA224:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256:
+ case OP_PCL_TLS12_AES_128_CBC_SHA384:
+ case OP_PCL_TLS12_AES_128_CBC_SHA512:
+ case OP_PCL_TLS12_AES_192_CBC_SHA160:
+ case OP_PCL_TLS12_AES_192_CBC_SHA224:
+ case OP_PCL_TLS12_AES_192_CBC_SHA256:
+ case OP_PCL_TLS12_AES_192_CBC_SHA512:
+ case OP_PCL_TLS12_AES_256_CBC_SHA160:
+ case OP_PCL_TLS12_AES_256_CBC_SHA224:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256:
+ case OP_PCL_TLS12_AES_256_CBC_SHA384:
+ case OP_PCL_TLS12_AES_256_CBC_SHA512:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA160:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA384:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA224:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA512:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA256:
+ case OP_PCL_TLS_PVT_MASTER_SECRET_PRF_FE:
+ case OP_PCL_TLS_PVT_MASTER_SECRET_PRF_FF:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_ike_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_IKE_HMAC_MD5:
+ case OP_PCL_IKE_HMAC_SHA1:
+ case OP_PCL_IKE_HMAC_AES128_CBC:
+ case OP_PCL_IKE_HMAC_SHA256:
+ case OP_PCL_IKE_HMAC_SHA384:
+ case OP_PCL_IKE_HMAC_SHA512:
+ case OP_PCL_IKE_HMAC_AES128_CMAC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_ipsec_proto(uint16_t protoinfo)
+{
+ uint16_t proto_cls1 = protoinfo & OP_PCL_IPSEC_CIPHER_MASK;
+ uint16_t proto_cls2 = protoinfo & OP_PCL_IPSEC_AUTH_MASK;
+
+ switch (proto_cls1) {
+ case OP_PCL_IPSEC_AES_NULL_WITH_GMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_PCL_IPSEC_AES_CCM8:
+ case OP_PCL_IPSEC_AES_CCM12:
+ case OP_PCL_IPSEC_AES_CCM16:
+ case OP_PCL_IPSEC_AES_GCM8:
+ case OP_PCL_IPSEC_AES_GCM12:
+ case OP_PCL_IPSEC_AES_GCM16:
+ /* CCM, GCM, GMAC require PROTINFO[7:0] = 0 */
+ if (proto_cls2 == OP_PCL_IPSEC_HMAC_NULL)
+ return 0;
+ return -EINVAL;
+ case OP_PCL_IPSEC_NULL:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_PCL_IPSEC_DES_IV64:
+ case OP_PCL_IPSEC_DES:
+ case OP_PCL_IPSEC_3DES:
+ case OP_PCL_IPSEC_AES_CBC:
+ case OP_PCL_IPSEC_AES_CTR:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (proto_cls2) {
+ case OP_PCL_IPSEC_HMAC_NULL:
+ case OP_PCL_IPSEC_HMAC_MD5_96:
+ case OP_PCL_IPSEC_HMAC_SHA1_96:
+ case OP_PCL_IPSEC_AES_XCBC_MAC_96:
+ case OP_PCL_IPSEC_HMAC_MD5_128:
+ case OP_PCL_IPSEC_HMAC_SHA1_160:
+ case OP_PCL_IPSEC_AES_CMAC_96:
+ case OP_PCL_IPSEC_HMAC_SHA2_256_128:
+ case OP_PCL_IPSEC_HMAC_SHA2_384_192:
+ case OP_PCL_IPSEC_HMAC_SHA2_512_256:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_srtp_proto(uint16_t protoinfo)
+{
+ uint16_t proto_cls1 = protoinfo & OP_PCL_SRTP_CIPHER_MASK;
+ uint16_t proto_cls2 = protoinfo & OP_PCL_SRTP_AUTH_MASK;
+
+ switch (proto_cls1) {
+ case OP_PCL_SRTP_AES_CTR:
+ switch (proto_cls2) {
+ case OP_PCL_SRTP_HMAC_SHA1_160:
+ return 0;
+ }
+ /* no break */
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_macsec_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_MACSEC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_wifi_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_WIFI:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_wimax_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_WIMAX_OFDM:
+ case OP_PCL_WIMAX_OFDMA:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/* Allowed blob proto flags for each SEC Era */
+static const uint32_t proto_blob_flags[] = {
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK | OP_PCL_BLOB_SEC_MEM,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK | OP_PCL_BLOB_SEC_MEM
+};
+
+static inline int __rta_blob_proto(uint16_t protoinfo)
+{
+ if (protoinfo & ~proto_blob_flags[rta_sec_era])
+ return -EINVAL;
+
+ switch (protoinfo & OP_PCL_BLOB_FORMAT_MASK) {
+ case OP_PCL_BLOB_FORMAT_NORMAL:
+ case OP_PCL_BLOB_FORMAT_MASTER_VER:
+ case OP_PCL_BLOB_FORMAT_TEST:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protoinfo & OP_PCL_BLOB_REG_MASK) {
+ case OP_PCL_BLOB_AFHA_SBOX:
+ if (rta_sec_era < RTA_SEC_ERA_3)
+ return -EINVAL;
+ /* no break */
+ case OP_PCL_BLOB_REG_MEMORY:
+ case OP_PCL_BLOB_REG_KEY1:
+ case OP_PCL_BLOB_REG_KEY2:
+ case OP_PCL_BLOB_REG_SPLIT:
+ case OP_PCL_BLOB_REG_PKE:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_dlc_proto(uint16_t protoinfo)
+{
+ if ((rta_sec_era < RTA_SEC_ERA_2) &&
+ (protoinfo & (OP_PCL_PKPROT_DSA_MSG | OP_PCL_PKPROT_HASH_MASK |
+ OP_PCL_PKPROT_EKT_Z | OP_PCL_PKPROT_DECRYPT_Z |
+ OP_PCL_PKPROT_DECRYPT_PRI)))
+ return -EINVAL;
+
+ switch (protoinfo & OP_PCL_PKPROT_HASH_MASK) {
+ case OP_PCL_PKPROT_HASH_MD5:
+ case OP_PCL_PKPROT_HASH_SHA1:
+ case OP_PCL_PKPROT_HASH_SHA224:
+ case OP_PCL_PKPROT_HASH_SHA256:
+ case OP_PCL_PKPROT_HASH_SHA384:
+ case OP_PCL_PKPROT_HASH_SHA512:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int __rta_rsa_enc_proto(uint16_t protoinfo)
+{
+ switch (protoinfo & OP_PCL_RSAPROT_OP_MASK) {
+ case OP_PCL_RSAPROT_OP_ENC_F_IN:
+ if ((protoinfo & OP_PCL_RSAPROT_FFF_MASK) !=
+ OP_PCL_RSAPROT_FFF_RED)
+ return -EINVAL;
+ break;
+ case OP_PCL_RSAPROT_OP_ENC_F_OUT:
+ switch (protoinfo & OP_PCL_RSAPROT_FFF_MASK) {
+ case OP_PCL_RSAPROT_FFF_RED:
+ case OP_PCL_RSAPROT_FFF_ENC:
+ case OP_PCL_RSAPROT_FFF_EKT:
+ case OP_PCL_RSAPROT_FFF_TK_ENC:
+ case OP_PCL_RSAPROT_FFF_TK_EKT:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int __rta_rsa_dec_proto(uint16_t protoinfo)
+{
+ switch (protoinfo & OP_PCL_RSAPROT_OP_MASK) {
+ case OP_PCL_RSAPROT_OP_DEC_ND:
+ case OP_PCL_RSAPROT_OP_DEC_PQD:
+ case OP_PCL_RSAPROT_OP_DEC_PQDPDQC:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protoinfo & OP_PCL_RSAPROT_PPP_MASK) {
+ case OP_PCL_RSAPROT_PPP_RED:
+ case OP_PCL_RSAPROT_PPP_ENC:
+ case OP_PCL_RSAPROT_PPP_EKT:
+ case OP_PCL_RSAPROT_PPP_TK_ENC:
+ case OP_PCL_RSAPROT_PPP_TK_EKT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (protoinfo & OP_PCL_RSAPROT_FMT_PKCSV15)
+ switch (protoinfo & OP_PCL_RSAPROT_FFF_MASK) {
+ case OP_PCL_RSAPROT_FFF_RED:
+ case OP_PCL_RSAPROT_FFF_ENC:
+ case OP_PCL_RSAPROT_FFF_EKT:
+ case OP_PCL_RSAPROT_FFF_TK_ENC:
+ case OP_PCL_RSAPROT_FFF_TK_EKT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * DKP Protocol - Restrictions on key (SRC,DST) combinations
+ * For e.g. key_in_out[0][0] = 1 means (SRC=IMM,DST=IMM) combination is allowed
+ */
+static const uint8_t key_in_out[4][4] = { {1, 0, 0, 0},
+ {1, 1, 1, 1},
+ {1, 0, 1, 0},
+ {1, 0, 0, 1} };
+
+static inline int __rta_dkp_proto(uint16_t protoinfo)
+{
+ int key_src = (protoinfo & OP_PCL_DKP_SRC_MASK) >> OP_PCL_DKP_SRC_SHIFT;
+ int key_dst = (protoinfo & OP_PCL_DKP_DST_MASK) >> OP_PCL_DKP_DST_SHIFT;
+
+ if (!key_in_out[key_src][key_dst]) {
+ pr_err("PROTO_DESC: Invalid DKP key (SRC,DST)\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static inline int __rta_3g_dcrc_proto(uint16_t protoinfo)
+{
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+
+ switch (protoinfo) {
+ case OP_PCL_3G_DCRC_CRC7:
+ case OP_PCL_3G_DCRC_CRC11:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_3g_rlc_proto(uint16_t protoinfo)
+{
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+
+ switch (protoinfo) {
+ case OP_PCL_3G_RLC_NULL:
+ case OP_PCL_3G_RLC_KASUMI:
+ case OP_PCL_3G_RLC_SNOW:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_lte_pdcp_proto(uint16_t protoinfo)
+{
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+
+ switch (protoinfo) {
+ case OP_PCL_LTE_ZUC:
+ if (rta_sec_era < RTA_SEC_ERA_5)
+ break;
+ case OP_PCL_LTE_NULL:
+ case OP_PCL_LTE_SNOW:
+ case OP_PCL_LTE_AES:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int __rta_lte_pdcp_mixed_proto(uint16_t protoinfo)
+{
+ switch (protoinfo & OP_PCL_LTE_MIXED_AUTH_MASK) {
+ case OP_PCL_LTE_MIXED_AUTH_NULL:
+ case OP_PCL_LTE_MIXED_AUTH_SNOW:
+ case OP_PCL_LTE_MIXED_AUTH_AES:
+ case OP_PCL_LTE_MIXED_AUTH_ZUC:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protoinfo & OP_PCL_LTE_MIXED_ENC_MASK) {
+ case OP_PCL_LTE_MIXED_ENC_NULL:
+ case OP_PCL_LTE_MIXED_ENC_SNOW:
+ case OP_PCL_LTE_MIXED_ENC_AES:
+ case OP_PCL_LTE_MIXED_ENC_ZUC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+struct proto_map {
+ uint32_t optype;
+ uint32_t protid;
+ int (*protoinfo_func)(uint16_t);
+};
+
+static const struct proto_map proto_table[] = {
+/*1*/ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_SSL30_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_TLS10_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_TLS11_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_TLS12_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DTLS10_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_IKEV1_PRF, __rta_ike_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_IKEV2_PRF, __rta_ike_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_PUBLICKEYPAIR, __rta_dlc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DSASIGN, __rta_dlc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DSAVERIFY, __rta_dlc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_IPSEC, __rta_ipsec_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_SRTP, __rta_srtp_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_SSL30, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_TLS10, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_TLS11, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_TLS12, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_DTLS10, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_MACSEC, __rta_macsec_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_WIFI, __rta_wifi_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_WIMAX, __rta_wimax_proto},
+/*21*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_BLOB, __rta_blob_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DIFFIEHELLMAN, __rta_dlc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_RSAENCRYPT, __rta_rsa_enc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_RSADECRYPT, __rta_rsa_dec_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_3G_DCRC, __rta_3g_dcrc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_3G_RLC_PDU, __rta_3g_rlc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_3G_RLC_SDU, __rta_3g_rlc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_LTE_PDCP_USER, __rta_lte_pdcp_proto},
+/*29*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_LTE_PDCP_CTRL, __rta_lte_pdcp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_MD5, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA1, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA224, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA256, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA384, __rta_dkp_proto},
+/*35*/ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA512, __rta_dkp_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_PUBLICKEYPAIR, __rta_dlc_proto},
+/*37*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_DSASIGN, __rta_dlc_proto},
+/*38*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_LTE_PDCP_CTRL_MIXED,
+ __rta_lte_pdcp_mixed_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_IPSEC_NEW, __rta_ipsec_proto},
+};
+
+/*
+ * Allowed OPERATION protocols for each SEC Era.
+ * Values represent the number of entries from proto_table[] that are supported.
+ */
+static const unsigned proto_table_sz[] = {21, 29, 29, 29, 29, 35, 37, 39};
+
+static inline int rta_proto_operation(struct program *program, uint32_t optype,
+ uint32_t protid, uint16_t protoinfo)
+{
+ uint32_t opcode = CMD_OPERATION;
+ unsigned i, found = 0;
+ uint32_t optype_tmp = optype;
+ unsigned start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ for (i = 0; i < proto_table_sz[rta_sec_era]; i++) {
+ /* clear last bit in optype to match also decap proto */
+ optype_tmp &= (uint32_t)~(1 << OP_TYPE_SHIFT);
+ if (optype_tmp == proto_table[i].optype) {
+ if (proto_table[i].protid == protid) {
+ /* nothing else to verify */
+ if (proto_table[i].protoinfo_func == NULL) {
+ found = 1;
+ break;
+ }
+ /* check protoinfo */
+ ret = (*proto_table[i].protoinfo_func)
+ (protoinfo);
+ if (ret < 0) {
+ pr_err("PROTO_DESC: Bad PROTO Type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ found = 1;
+ break;
+ }
+ }
+ }
+ if (!found) {
+ pr_err("PROTO_DESC: Operation Type Mismatch. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ __rta_out32(program, opcode | optype | protid | protoinfo);
+ program->current_instruction++;
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int rta_dkp_proto(struct program *program, uint32_t protid,
+ uint16_t key_src, uint16_t key_dst,
+ uint16_t keylen, uint64_t key,
+ enum rta_data_type key_type)
+{
+ unsigned start_pc = program->current_pc;
+ unsigned in_words = 0, out_words = 0;
+ int ret;
+
+ key_src &= OP_PCL_DKP_SRC_MASK;
+ key_dst &= OP_PCL_DKP_DST_MASK;
+ keylen &= OP_PCL_DKP_KEY_MASK;
+
+ ret = rta_proto_operation(program, OP_TYPE_UNI_PROTOCOL, protid,
+ key_src | key_dst | keylen);
+ if (ret < 0)
+ return ret;
+
+ if ((key_src == OP_PCL_DKP_SRC_PTR) ||
+ (key_src == OP_PCL_DKP_SRC_SGF)) {
+ __rta_out64(program, program->ps, key);
+ in_words = program->ps ? 2 : 1;
+ } else if (key_src == OP_PCL_DKP_SRC_IMM) {
+ __rta_inline_data(program, key, inline_flags(key_type), keylen);
+ in_words = (unsigned)((keylen + 3) / 4);
+ }
+
+ if ((key_dst == OP_PCL_DKP_DST_PTR) ||
+ (key_dst == OP_PCL_DKP_DST_SGF)) {
+ out_words = in_words;
+ } else if (key_dst == OP_PCL_DKP_DST_IMM) {
+ out_words = split_key_len(protid) / 4;
+ }
+
+ if (out_words < in_words) {
+ pr_err("PROTO_DESC: DKP doesn't currently support a smaller descriptor\n");
+ program->first_error_pc = start_pc;
+ return -EINVAL;
+ }
+
+ /* If needed, reserve space in resulting descriptor for derived key */
+ program->current_pc += (out_words - in_words);
+
+ return (int)start_pc;
+}
+
+#endif /* __RTA_PROTOCOL_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/sec_run_time_asm.h b/drivers/common/dpaa2/flib/rta/sec_run_time_asm.h
new file mode 100644
index 0000000..cedf1ea
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/sec_run_time_asm.h
@@ -0,0 +1,767 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_SEC_RUN_TIME_ASM_H__
+#define __RTA_SEC_RUN_TIME_ASM_H__
+
+#include "flib/desc.h"
+
+/* flib/compat.h is not delivered in kernel */
+#ifndef __KERNEL__
+#include "flib/compat.h"
+#endif
+
+/**
+ * enum rta_sec_era - SEC HW block revisions supported by the RTA library
+ * @RTA_SEC_ERA_1: SEC Era 1
+ * @RTA_SEC_ERA_2: SEC Era 2
+ * @RTA_SEC_ERA_3: SEC Era 3
+ * @RTA_SEC_ERA_4: SEC Era 4
+ * @RTA_SEC_ERA_5: SEC Era 5
+ * @RTA_SEC_ERA_6: SEC Era 6
+ * @RTA_SEC_ERA_7: SEC Era 7
+ * @RTA_SEC_ERA_8: SEC Era 8
+ * @MAX_SEC_ERA: maximum SEC HW block revision supported by RTA library
+ */
+enum rta_sec_era {
+ RTA_SEC_ERA_1,
+ RTA_SEC_ERA_2,
+ RTA_SEC_ERA_3,
+ RTA_SEC_ERA_4,
+ RTA_SEC_ERA_5,
+ RTA_SEC_ERA_6,
+ RTA_SEC_ERA_7,
+ RTA_SEC_ERA_8,
+ MAX_SEC_ERA = RTA_SEC_ERA_8
+};
+
+/**
+ * DEFAULT_SEC_ERA - the default value for the SEC era in case the user provides
+ * an unsupported value.
+ */
+#define DEFAULT_SEC_ERA MAX_SEC_ERA
+
+/**
+ * USER_SEC_ERA - translates the SEC Era from internal to user representation.
+ * @sec_era: SEC Era in internal (library) representation
+ */
+#define USER_SEC_ERA(sec_era) (sec_era + 1)
+
+/**
+ * INTL_SEC_ERA - translates the SEC Era from user representation to internal.
+ * @sec_era: SEC Era in user representation
+ */
+#define INTL_SEC_ERA(sec_era) (sec_era - 1)
+
+/**
+ * enum rta_jump_type - Types of action taken by JUMP command
+ * @LOCAL_JUMP: conditional jump to an offset within the descriptor buffer
+ * @FAR_JUMP: conditional jump to a location outside the descriptor buffer,
+ * indicated by the POINTER field after the JUMP command.
+ * @HALT: conditional halt - stop the execution of the current descriptor and
+ * writes PKHA / Math condition bits as status / error code.
+ * @HALT_STATUS: conditional halt with user-specified status - stop the
+ * execution of the current descriptor and writes the value of
+ * "LOCAL OFFSET" JUMP field as status / error code.
+ * @GOSUB: conditional subroutine call - similar to @LOCAL_JUMP, but also saves
+ * return address in the Return Address register; subroutine calls
+ * cannot be nested.
+ * @RETURN: conditional subroutine return - similar to @LOCAL_JUMP, but the
+ * offset is taken from the Return Address register.
+ * @LOCAL_JUMP_INC: similar to @LOCAL_JUMP, but increment the register specified
+ * in "SRC_DST" JUMP field before evaluating the jump
+ * condition.
+ * @LOCAL_JUMP_DEC: similar to @LOCAL_JUMP, but decrement the register specified
+ * in "SRC_DST" JUMP field before evaluating the jump
+ * condition.
+ */
+enum rta_jump_type {
+ LOCAL_JUMP,
+ FAR_JUMP,
+ HALT,
+ HALT_STATUS,
+ GOSUB,
+ RETURN,
+ LOCAL_JUMP_INC,
+ LOCAL_JUMP_DEC
+};
+
+/**
+ * enum rta_jump_cond - How test conditions are evaluated by JUMP command
+ * @ALL_TRUE: perform action if ALL selected conditions are true
+ * @ALL_FALSE: perform action if ALL selected conditions are false
+ * @ANY_TRUE: perform action if ANY of the selected conditions is true
+ * @ANY_FALSE: perform action if ANY of the selected conditions is false
+ */
+enum rta_jump_cond {
+ ALL_TRUE,
+ ALL_FALSE,
+ ANY_TRUE,
+ ANY_FALSE
+};
+
+/**
+ * enum rta_share_type - Types of sharing for JOB_HDR and SHR_HDR commands
+ * @SHR_NEVER: nothing is shared; descriptors can execute in parallel (i.e. no
+ * dependencies are allowed between them).
+ * @SHR_WAIT: shared descriptor and keys are shared once the descriptor sets
+ * "OK to share" in DECO Control Register (DCTRL).
+ * @SHR_SERIAL: shared descriptor and keys are shared once the descriptor has
+ * completed.
+ * @SHR_ALWAYS: shared descriptor is shared anytime after the descriptor is
+ * loaded.
+ * @SHR_DEFER: valid only for JOB_HDR; sharing type is the one specified
+ * in the shared descriptor associated with the job descriptor.
+ */
+enum rta_share_type {
+ SHR_NEVER,
+ SHR_WAIT,
+ SHR_SERIAL,
+ SHR_ALWAYS,
+ SHR_DEFER
+};
+
+/**
+ * enum rta_data_type - Indicates how is the data provided and how to include it
+ * in the descriptor.
+ * @RTA_DATA_PTR: Data is in memory and accessed by reference; data address is a
+ * physical (bus) address.
+ * @RTA_DATA_IMM: Data is inlined in descriptor and accessed as immediate data;
+ * data address is a virtual address.
+ * @RTA_DATA_IMM_DMA: (AIOP only) Data is inlined in descriptor and accessed as
+ * immediate data; data address is a physical (bus) address
+ * in external memory and CDMA is programmed to transfer the
+ * data into descriptor buffer being built in Workspace Area.
+ */
+enum rta_data_type {
+ RTA_DATA_PTR = 1,
+ RTA_DATA_IMM,
+ RTA_DATA_IMM_DMA
+};
+
+/* Registers definitions */
+enum rta_regs {
+ /* CCB Registers */
+ CONTEXT1 = 1,
+ CONTEXT2,
+ KEY1,
+ KEY2,
+ KEY1SZ,
+ KEY2SZ,
+ ICV1SZ,
+ ICV2SZ,
+ DATA1SZ,
+ DATA2SZ,
+ ALTDS1,
+ IV1SZ,
+ AAD1SZ,
+ MODE1,
+ MODE2,
+ CCTRL,
+ DCTRL,
+ ICTRL,
+ CLRW,
+ CSTAT,
+ IFIFO,
+ NFIFO,
+ OFIFO,
+ PKASZ,
+ PKBSZ,
+ PKNSZ,
+ PKESZ,
+ /* DECO Registers */
+ MATH0,
+ MATH1,
+ MATH2,
+ MATH3,
+ DESCBUF,
+ JOBDESCBUF,
+ SHAREDESCBUF,
+ DPOVRD,
+ DJQDA,
+ DSTAT,
+ DPID,
+ DJQCTRL,
+ ALTSOURCE,
+ SEQINSZ,
+ SEQOUTSZ,
+ VSEQINSZ,
+ VSEQOUTSZ,
+ /* PKHA Registers */
+ PKA,
+ PKN,
+ PKA0,
+ PKA1,
+ PKA2,
+ PKA3,
+ PKB,
+ PKB0,
+ PKB1,
+ PKB2,
+ PKB3,
+ PKE,
+ /* Pseudo registers */
+ AB1,
+ AB2,
+ ABD,
+ IFIFOABD,
+ IFIFOAB1,
+ IFIFOAB2,
+ AFHA_SBOX,
+ MDHA_SPLIT_KEY,
+ JOBSRC,
+ ZERO,
+ ONE,
+ AAD1,
+ IV1,
+ IV2,
+ MSG1,
+ MSG2,
+ MSG,
+ MSG_CKSUM,
+ MSGOUTSNOOP,
+ MSGINSNOOP,
+ ICV1,
+ ICV2,
+ SKIP,
+ NONE,
+ RNGOFIFO,
+ RNG,
+ IDFNS,
+ ODFNS,
+ NFIFOSZ,
+ SZ,
+ PAD,
+ SAD1,
+ AAD2,
+ BIT_DATA,
+ NFIFO_SZL,
+ NFIFO_SZM,
+ NFIFO_L,
+ NFIFO_M,
+ SZL,
+ SZM,
+ JOBDESCBUF_EFF,
+ SHAREDESCBUF_EFF,
+ METADATA,
+ GTR,
+ STR,
+ OFIFO_SYNC,
+ MSGOUTSNOOP_ALT
+};
+
+/* Command flags */
+#define FLUSH1 BIT(0)
+#define LAST1 BIT(1)
+#define LAST2 BIT(2)
+#define IMMED BIT(3)
+#define SGF BIT(4)
+#define VLF BIT(5)
+#define EXT BIT(6)
+#define CONT BIT(7)
+#define SEQ BIT(8)
+#define AIDF BIT(9)
+#define FLUSH2 BIT(10)
+#define CLASS1 BIT(11)
+#define CLASS2 BIT(12)
+#define BOTH BIT(13)
+
+/**
+ * DCOPY - (AIOP only) command param is pointer to external memory
+ *
+ * CDMA must be used to transfer the key via DMA into Workspace Area.
+ * Valid only in combination with IMMED flag.
+ */
+#define DCOPY BIT(30)
+
+#define COPY BIT(31) /*command param is pointer (not immediate)
+ valid only in combination when IMMED */
+
+#define __COPY_MASK (COPY | DCOPY)
+
+/* SEQ IN/OUT PTR Command specific flags */
+#define RBS BIT(16)
+#define INL BIT(17)
+#define PRE BIT(18)
+#define RTO BIT(19)
+#define RJD BIT(20)
+#define SOP BIT(21)
+#define RST BIT(22)
+#define EWS BIT(23)
+
+#define ENC BIT(14) /* Encrypted Key */
+#define EKT BIT(15) /* AES CCM Encryption (default is
+ * AES ECB Encryption) */
+#define TK BIT(16) /* Trusted Descriptor Key (default is
+ * Job Descriptor Key) */
+#define NWB BIT(17) /* No Write Back Key */
+#define PTS BIT(18) /* Plaintext Store */
+
+/* HEADER Command specific flags */
+#define RIF BIT(16)
+#define DNR BIT(17)
+#define CIF BIT(18)
+#define PD BIT(19)
+#define RSMS BIT(20)
+#define TD BIT(21)
+#define MTD BIT(22)
+#define REO BIT(23)
+#define SHR BIT(24)
+#define SC BIT(25)
+/* Extended HEADER specific flags */
+#define DSV BIT(7)
+#define DSEL_MASK 0x00000007 /* DECO Select */
+#define FTD BIT(8)
+
+/* JUMP Command specific flags */
+#define NIFP BIT(20)
+#define NIP BIT(21)
+#define NOP BIT(22)
+#define NCP BIT(23)
+#define CALM BIT(24)
+
+#define MATH_Z BIT(25)
+#define MATH_N BIT(26)
+#define MATH_NV BIT(27)
+#define MATH_C BIT(28)
+#define PK_0 BIT(29)
+#define PK_GCD_1 BIT(30)
+#define PK_PRIME BIT(31)
+#define SELF BIT(0)
+#define SHRD BIT(1)
+#define JQP BIT(2)
+
+/* NFIFOADD specific flags */
+#define PAD_ZERO BIT(16)
+#define PAD_NONZERO BIT(17)
+#define PAD_INCREMENT BIT(18)
+#define PAD_RANDOM BIT(19)
+#define PAD_ZERO_N1 BIT(20)
+#define PAD_NONZERO_0 BIT(21)
+#define PAD_N1 BIT(23)
+#define PAD_NONZERO_N BIT(24)
+#define OC BIT(25)
+#define BM BIT(26)
+#define PR BIT(27)
+#define PS BIT(28)
+#define BP BIT(29)
+
+/* MOVE Command specific flags */
+#define WAITCOMP BIT(16)
+#define SIZE_WORD BIT(17)
+#define SIZE_BYTE BIT(18)
+#define SIZE_DWORD BIT(19)
+
+/* MATH command specific flags */
+#define IFB MATH_IFB
+#define NFU MATH_NFU
+#define STL MATH_STL
+#define SSEL MATH_SSEL
+#define SWP MATH_SWP
+#define IMMED2 BIT(31)
+
+/**
+ * struct program - descriptor buffer management structure
+ * @current_pc: current offset in descriptor
+ * @current_instruction: current instruction in descriptor
+ * @first_error_pc: offset of the first error in descriptor
+ * @start_pc: start offset in descriptor buffer
+ * @buffer: buffer carrying descriptor
+ * @shrhdr: shared descriptor header
+ * @jobhdr: job descriptor header
+ * @ps: pointer fields size; if ps is true, pointers will be 36bits in
+ * length; if ps is false, pointers will be 32bits in length
+ * @bswap: if true, perform byte swap on a 4-byte boundary
+ */
+struct program {
+ unsigned current_pc;
+ unsigned current_instruction;
+ unsigned first_error_pc;
+ unsigned start_pc;
+ uint32_t *buffer;
+ uint32_t *shrhdr;
+ uint32_t *jobhdr;
+ bool ps;
+ bool bswap;
+};
+
+static inline void rta_program_cntxt_init(struct program *program,
+ uint32_t *buffer, unsigned offset)
+{
+ program->current_pc = 0;
+ program->current_instruction = 0;
+ program->first_error_pc = 0;
+ program->start_pc = offset;
+ program->buffer = buffer;
+ program->shrhdr = NULL;
+ program->jobhdr = NULL;
+ program->ps = false;
+ program->bswap = false;
+}
+
+static inline int rta_program_finalize(struct program *program)
+{
+ /* Descriptor is usually not allowed to go beyond 64 words size */
+ if (program->current_pc > MAX_CAAM_DESCSIZE)
+ pr_warn("Descriptor Size exceeded max limit of 64 words\n");
+
+ /* Descriptor is erroneous */
+ if (program->first_error_pc) {
+ pr_err("Descriptor creation error\n");
+ return -EINVAL;
+ }
+
+ /* Update descriptor length in shared and job descriptor headers */
+ if (program->shrhdr != NULL)
+ *program->shrhdr |= program->bswap ?
+ swab32(program->current_pc) :
+ program->current_pc;
+ else if (program->jobhdr != NULL)
+ *program->jobhdr |= program->bswap ?
+ swab32(program->current_pc) :
+ program->current_pc;
+
+ return (int)program->current_pc;
+}
+
+static inline unsigned rta_program_set_36bit_addr(struct program *program)
+{
+ program->ps = true;
+ return program->current_pc;
+}
+
+static inline unsigned rta_program_set_bswap(struct program *program)
+{
+ program->bswap = true;
+ return program->current_pc;
+}
+
+static inline void __rta_out32(struct program *program, uint32_t val)
+{
+ program->buffer[program->current_pc] = program->bswap ?
+ swab32(val) : val;
+ program->current_pc++;
+}
+
+static inline void __rta_out_be32(struct program *program, uint32_t val)
+{
+ program->buffer[program->current_pc] = cpu_to_be32(val);
+ program->current_pc++;
+}
+
+static inline void __rta_out_le32(struct program *program, uint32_t val)
+{
+ program->buffer[program->current_pc] = cpu_to_le32(val);
+ program->current_pc++;
+}
+
+static inline void __rta_out64(struct program *program, bool is_ext,
+ uint64_t val)
+{
+ if (is_ext) {
+ /*
+ * Since we are guaranteed only a 4-byte alignment in the
+ * descriptor buffer, we have to do 2 x 32-bit (word) writes.
+ * For the order of the 2 words to be correct, we need to
+ * take into account the endianness of the CPU.
+ */
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ __rta_out32(program, program->bswap ? lower_32_bits(val) :
+ upper_32_bits(val));
+
+ __rta_out32(program, program->bswap ? upper_32_bits(val) :
+ lower_32_bits(val));
+#else
+ __rta_out32(program, program->bswap ? upper_32_bits(val) :
+ lower_32_bits(val));
+
+ __rta_out32(program, program->bswap ? lower_32_bits(val) :
+ upper_32_bits(val));
+#endif
+ } else {
+ __rta_out32(program, lower_32_bits(val));
+ }
+}
+
+static inline unsigned rta_word(struct program *program, uint32_t val)
+{
+ unsigned start_pc = program->current_pc;
+
+ __rta_out32(program, val);
+
+ return start_pc;
+}
+
+static inline unsigned rta_dword(struct program *program, uint64_t val)
+{
+ unsigned start_pc = program->current_pc;
+
+ __rta_out64(program, true, val);
+
+ return start_pc;
+}
+
+static inline uint32_t inline_flags(enum rta_data_type data_type)
+{
+ switch (data_type) {
+ case RTA_DATA_PTR:
+ return 0;
+ case RTA_DATA_IMM:
+ return IMMED | COPY;
+ case RTA_DATA_IMM_DMA:
+ return IMMED | DCOPY;
+ default:
+ /* warn and default to RTA_DATA_PTR */
+ pr_warn("RTA: defaulting to RTA_DATA_PTR parameter type\n");
+ return 0;
+ }
+}
+
+static inline unsigned rta_copy_data(struct program *program, uint8_t *data,
+ unsigned length)
+{
+ unsigned i;
+ unsigned start_pc = program->current_pc;
+ uint8_t *tmp = (uint8_t *)&program->buffer[program->current_pc];
+
+ for (i = 0; i < length; i++)
+ *tmp++ = data[i];
+ program->current_pc += (length + 3) / 4;
+
+ return start_pc;
+}
+
+#if defined(__EWL__) && defined(AIOP)
+static inline void __rta_dma_data(void *ws_dst, uint64_t ext_address,
+ uint16_t size)
+{ cdma_read(ws_dst, ext_address, size); }
+#else
+static inline void __rta_dma_data(void *ws_dst __maybe_unused,
+ uint64_t ext_address __maybe_unused, uint16_t size __maybe_unused)
+{ pr_warn("RTA: DCOPY not supported, DMA will be skipped\n"); }
+#endif /* defined(__EWL__) && defined(AIOP) */
+
+static inline void __rta_inline_data(struct program *program, uint64_t data,
+ uint32_t copy_data, uint32_t length)
+{
+ if (!copy_data) {
+ __rta_out64(program, length > 4, data);
+ } else if (copy_data & COPY) {
+ uint8_t *tmp = (uint8_t *)&program->buffer[program->current_pc];
+ uint32_t i;
+
+ for (i = 0; i < length; i++)
+ *tmp++ = ((uint8_t *)(uintptr_t)data)[i];
+ program->current_pc += ((length + 3) / 4);
+ } else if (copy_data & DCOPY) {
+ __rta_dma_data(&program->buffer[program->current_pc], data,
+ (uint16_t)length);
+ program->current_pc += ((length + 3) / 4);
+ }
+}
+
+static inline unsigned rta_desc_len(uint32_t *buffer)
+{
+ if ((*buffer & CMD_MASK) == CMD_DESC_HDR)
+ return *buffer & HDR_DESCLEN_MASK;
+ else
+ return *buffer & HDR_DESCLEN_SHR_MASK;
+}
+
+static inline unsigned rta_desc_bytes(uint32_t *buffer)
+{
+ return (unsigned)(rta_desc_len(buffer) * CAAM_CMD_SZ);
+}
+
+/**
+ * split_key_len - Compute MDHA split key length for a given algorithm
+ * @hash: Hashing algorithm selection, one of OP_ALG_ALGSEL_* or
+ * OP_PCLID_DKP_* - MD5, SHA1, SHA224, SHA256, SHA384, SHA512.
+ *
+ * Return: MDHA split key length
+ */
+static inline uint32_t split_key_len(uint32_t hash)
+{
+ /* Sizes for MDHA pads (*not* keys): MD5, SHA1, 224, 256, 384, 512 */
+ static const uint8_t mdpadlen[] = { 16, 20, 32, 32, 64, 64 };
+ uint32_t idx;
+
+ idx = (hash & OP_ALG_ALGSEL_SUBMASK) >> OP_ALG_ALGSEL_SHIFT;
+
+ return (uint32_t)(mdpadlen[idx] * 2);
+}
+
+/**
+ * split_key_pad_len - Compute MDHA split key pad length for a given algorithm
+ * @hash: Hashing algorithm selection, one of OP_ALG_ALGSEL_* - MD5, SHA1,
+ * SHA224, SHA384, SHA512.
+ *
+ * Return: MDHA split key pad length
+ */
+static inline uint32_t split_key_pad_len(uint32_t hash)
+{
+ return ALIGN(split_key_len(hash), 16);
+}
+
+static inline unsigned rta_set_label(struct program *program)
+{
+ return program->current_pc + program->start_pc;
+}
+
+static inline int rta_patch_move(struct program *program, int line,
+ unsigned new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~MOVE_OFFSET_MASK;
+ opcode |= (new_ref << (MOVE_OFFSET_SHIFT + 2)) & MOVE_OFFSET_MASK;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int rta_patch_jmp(struct program *program, int line,
+ unsigned new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~JUMP_OFFSET_MASK;
+ opcode |= (new_ref - (line + program->start_pc)) & JUMP_OFFSET_MASK;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int rta_patch_header(struct program *program, int line,
+ unsigned new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~HDR_START_IDX_MASK;
+ opcode |= (new_ref << HDR_START_IDX_SHIFT) & HDR_START_IDX_MASK;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int rta_patch_load(struct program *program, int line,
+ unsigned new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = (bswap ? swab32(program->buffer[line]) :
+ program->buffer[line]) & (uint32_t)~LDST_OFFSET_MASK;
+
+ if (opcode & (LDST_SRCDST_WORD_DESCBUF | LDST_CLASS_DECO))
+ opcode |= (new_ref << LDST_OFFSET_SHIFT) & LDST_OFFSET_MASK;
+ else
+ opcode |= (new_ref << (LDST_OFFSET_SHIFT + 2)) &
+ LDST_OFFSET_MASK;
+
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int rta_patch_store(struct program *program, int line,
+ unsigned new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~LDST_OFFSET_MASK;
+
+ switch (opcode & LDST_SRCDST_MASK) {
+ case LDST_SRCDST_WORD_DESCBUF:
+ case LDST_SRCDST_WORD_DESCBUF_JOB:
+ case LDST_SRCDST_WORD_DESCBUF_SHARED:
+ case LDST_SRCDST_WORD_DESCBUF_JOB_WE:
+ case LDST_SRCDST_WORD_DESCBUF_SHARED_WE:
+ opcode |= ((new_ref) << LDST_OFFSET_SHIFT) & LDST_OFFSET_MASK;
+ break;
+ default:
+ opcode |= (new_ref << (LDST_OFFSET_SHIFT + 2)) &
+ LDST_OFFSET_MASK;
+ }
+
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int rta_patch_raw(struct program *program, int line,
+ unsigned mask, unsigned new_val)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~mask;
+ opcode |= new_val & mask;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int __rta_map_opcode(uint32_t name,
+ const uint32_t (*map_table)[2],
+ unsigned num_of_entries, uint32_t *val)
+{
+ unsigned i;
+
+ for (i = 0; i < num_of_entries; i++)
+ if (map_table[i][0] == name) {
+ *val = map_table[i][1];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline void __rta_map_flags(uint32_t flags,
+ const uint32_t (*flags_table)[2],
+ unsigned num_of_entries, uint32_t *opcode)
+{
+ unsigned i;
+
+ for (i = 0; i < num_of_entries; i++) {
+ if (flags_table[i][0] & flags)
+ *opcode |= flags_table[i][1];
+ }
+}
+
+#endif /* __RTA_SEC_RUN_TIME_ASM_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/seq_in_out_ptr_cmd.h b/drivers/common/dpaa2/flib/rta/seq_in_out_ptr_cmd.h
new file mode 100644
index 0000000..0785a19
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/seq_in_out_ptr_cmd.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_SEQ_IN_OUT_PTR_CMD_H__
+#define __RTA_SEQ_IN_OUT_PTR_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed SEQ IN PTR flags for each SEC Era. */
+static const uint32_t seq_in_ptr_flags[] = {
+ RBS | INL | SGF | PRE | EXT | RTO,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP
+};
+
+/* Allowed SEQ OUT PTR flags for each SEC Era. */
+static const uint32_t seq_out_ptr_flags[] = {
+ SGF | PRE | EXT,
+ SGF | PRE | EXT | RTO,
+ SGF | PRE | EXT | RTO,
+ SGF | PRE | EXT | RTO,
+ SGF | PRE | EXT | RTO | RST | EWS,
+ SGF | PRE | EXT | RTO | RST | EWS,
+ SGF | PRE | EXT | RTO | RST | EWS,
+ SGF | PRE | EXT | RTO | RST | EWS
+};
+
+static inline int rta_seq_in_ptr(struct program *program, uint64_t src,
+ uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = CMD_SEQ_IN_PTR;
+ unsigned start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ /* Parameters checking */
+ if ((flags & RTO) && (flags & PRE)) {
+ pr_err("SEQ IN PTR: Invalid usage of RTO and PRE flags\n");
+ goto err;
+ }
+ if (flags & ~seq_in_ptr_flags[rta_sec_era]) {
+ pr_err("SEQ IN PTR: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ if ((flags & INL) && (flags & RJD)) {
+ pr_err("SEQ IN PTR: Invalid usage of INL and RJD flags\n");
+ goto err;
+ }
+ if ((src) && (flags & (SOP | RTO | PRE))) {
+ pr_err("SEQ IN PTR: Invalid usage of RTO or PRE flag\n");
+ goto err;
+ }
+ if ((flags & SOP) && (flags & (RBS | PRE | RTO | EXT))) {
+ pr_err("SEQ IN PTR: Invalid usage of SOP and (RBS or PRE or RTO or EXT) flags\n");
+ goto err;
+ }
+
+ /* write flag fields */
+ if (flags & RBS)
+ opcode |= SQIN_RBS;
+ if (flags & INL)
+ opcode |= SQIN_INL;
+ if (flags & SGF)
+ opcode |= SQIN_SGF;
+ if (flags & PRE)
+ opcode |= SQIN_PRE;
+ if (flags & RTO)
+ opcode |= SQIN_RTO;
+ if (flags & RJD)
+ opcode |= SQIN_RJD;
+ if (flags & SOP)
+ opcode |= SQIN_SOP;
+ if ((length >> 16) || (flags & EXT)) {
+ if (flags & SOP) {
+ pr_err("SEQ IN PTR: Invalid usage of SOP and EXT flags\n");
+ goto err;
+ }
+
+ opcode |= SQIN_EXT;
+ } else {
+ opcode |= length & SQIN_LEN_MASK;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer or immediate data field */
+ if (!(opcode & (SQIN_PRE | SQIN_RTO | SQIN_SOP)))
+ __rta_out64(program, program->ps, src);
+
+ /* write extended length field */
+ if (opcode & SQIN_EXT)
+ __rta_out32(program, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int rta_seq_out_ptr(struct program *program, uint64_t dst,
+ uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = CMD_SEQ_OUT_PTR;
+ unsigned start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ /* Parameters checking */
+ if (flags & ~seq_out_ptr_flags[rta_sec_era]) {
+ pr_err("SEQ OUT PTR: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ if ((flags & RTO) && (flags & PRE)) {
+ pr_err("SEQ OUT PTR: Invalid usage of RTO and PRE flags\n");
+ goto err;
+ }
+ if ((dst) && (flags & (RTO | PRE))) {
+ pr_err("SEQ OUT PTR: Invalid usage of RTO or PRE flag\n");
+ goto err;
+ }
+ if ((flags & RST) && !(flags & RTO)) {
+ pr_err("SEQ OUT PTR: RST flag must be used with RTO flag\n");
+ goto err;
+ }
+
+ /* write flag fields */
+ if (flags & SGF)
+ opcode |= SQOUT_SGF;
+ if (flags & PRE)
+ opcode |= SQOUT_PRE;
+ if (flags & RTO)
+ opcode |= SQOUT_RTO;
+ if (flags & RST)
+ opcode |= SQOUT_RST;
+ if (flags & EWS)
+ opcode |= SQOUT_EWS;
+ if ((length >> 16) || (flags & EXT))
+ opcode |= SQOUT_EXT;
+ else
+ opcode |= length & SQOUT_LEN_MASK;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer or immediate data field */
+ if (!(opcode & (SQOUT_PRE | SQOUT_RTO)))
+ __rta_out64(program, program->ps, dst);
+
+ /* write extended length field */
+ if (opcode & SQOUT_EXT)
+ __rta_out32(program, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_SEQ_IN_OUT_PTR_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/signature_cmd.h b/drivers/common/dpaa2/flib/rta/signature_cmd.h
new file mode 100644
index 0000000..52f425e
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/signature_cmd.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_SIGNATURE_CMD_H__
+#define __RTA_SIGNATURE_CMD_H__
+
+static inline int rta_signature(struct program *program, uint32_t sign_type)
+{
+ uint32_t opcode = CMD_SIGNATURE;
+ unsigned start_pc = program->current_pc;
+
+ switch (sign_type) {
+ case (SIGN_TYPE_FINAL):
+ case (SIGN_TYPE_FINAL_RESTORE):
+ case (SIGN_TYPE_FINAL_NONZERO):
+ case (SIGN_TYPE_IMM_2):
+ case (SIGN_TYPE_IMM_3):
+ case (SIGN_TYPE_IMM_4):
+ opcode |= sign_type;
+ break;
+ default:
+ pr_err("SIGNATURE Command: Invalid type selection\n");
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+#endif /* __RTA_SIGNATURE_CMD_H__ */
diff --git a/drivers/common/dpaa2/flib/rta/store_cmd.h b/drivers/common/dpaa2/flib/rta/store_cmd.h
new file mode 100644
index 0000000..62dc278
--- /dev/null
+++ b/drivers/common/dpaa2/flib/rta/store_cmd.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause or GPL-2.0+
+ */
+
+#ifndef __RTA_STORE_CMD_H__
+#define __RTA_STORE_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t store_src_table[][2] = {
+/*1*/ { KEY1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_KEYSZ_REG },
+ { KEY2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_KEYSZ_REG },
+ { DJQDA, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_JQDAR },
+ { MODE1, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_MODE_REG },
+ { MODE2, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_MODE_REG },
+ { DJQCTRL, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_JQCTRL },
+ { DATA1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DATASZ_REG },
+ { DATA2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_DATASZ_REG },
+ { DSTAT, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_STAT },
+ { ICV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_ICVSZ_REG },
+ { ICV2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_ICVSZ_REG },
+ { DPID, LDST_CLASS_DECO | LDST_SRCDST_WORD_PID },
+ { CCTRL, LDST_SRCDST_WORD_CHACTRL },
+ { ICTRL, LDST_SRCDST_WORD_IRQCTRL },
+ { CLRW, LDST_SRCDST_WORD_CLRW },
+ { MATH0, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH0 },
+ { CSTAT, LDST_SRCDST_WORD_STAT },
+ { MATH1, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH1 },
+ { MATH2, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH2 },
+ { AAD1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DECO_AAD_SZ },
+ { MATH3, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH3 },
+ { IV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_CLASS1_IV_SZ },
+ { PKASZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_A_SZ },
+ { PKBSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_B_SZ },
+ { PKESZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_E_SZ },
+ { PKNSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_N_SZ },
+ { CONTEXT1, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT },
+ { CONTEXT2, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT },
+ { DESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF },
+/*30*/ { JOBDESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF_JOB },
+ { SHAREDESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF_SHARED },
+/*32*/ { JOBDESCBUF_EFF, LDST_CLASS_DECO |
+ LDST_SRCDST_WORD_DESCBUF_JOB_WE },
+ { SHAREDESCBUF_EFF, LDST_CLASS_DECO |
+ LDST_SRCDST_WORD_DESCBUF_SHARED_WE },
+/*34*/ { GTR, LDST_CLASS_DECO | LDST_SRCDST_WORD_GTR },
+ { STR, LDST_CLASS_DECO | LDST_SRCDST_WORD_STR }
+};
+
+/*
+ * Allowed STORE sources for each SEC ERA.
+ * Values represent the number of entries from source_src_table[] that are
+ * supported.
+ */
+static const unsigned store_src_table_sz[] = {29, 31, 33, 33, 33, 33, 35, 35};
+
+static inline int rta_store(struct program *program, uint64_t src,
+ uint16_t offset, uint64_t dst, uint32_t length,
+ uint32_t flags)
+{
+ uint32_t opcode = 0, val;
+ int ret = -EINVAL;
+ unsigned start_pc = program->current_pc;
+
+ if (flags & SEQ)
+ opcode = CMD_SEQ_STORE;
+ else
+ opcode = CMD_STORE;
+
+ /* parameters check */
+ if ((flags & IMMED) && (flags & SGF)) {
+ pr_err("STORE: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ if ((flags & IMMED) && (offset != 0)) {
+ pr_err("STORE: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if ((flags & SEQ) && ((src == JOBDESCBUF) || (src == SHAREDESCBUF) ||
+ (src == JOBDESCBUF_EFF) ||
+ (src == SHAREDESCBUF_EFF))) {
+ pr_err("STORE: Invalid SRC type. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if (flags & IMMED)
+ opcode |= LDST_IMM;
+
+ if ((flags & SGF) || (flags & VLF))
+ opcode |= LDST_VLF;
+
+ /*
+ * source for data to be stored can be specified as:
+ * - register location; set in src field[9-15];
+ * - if IMMED flag is set, data is set in value field [0-31];
+ * user can give this value as actual value or pointer to data
+ */
+ if (!(flags & IMMED)) {
+ ret = __rta_map_opcode((uint32_t)src, store_src_table,
+ store_src_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("STORE: Invalid source. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+ }
+
+ /* DESC BUFFER: length / offset values are specified in 4-byte words */
+ if ((src == DESCBUF) || (src == JOBDESCBUF) || (src == SHAREDESCBUF) ||
+ (src == JOBDESCBUF_EFF) || (src == SHAREDESCBUF_EFF)) {
+ opcode |= (length >> 2);
+ opcode |= (uint32_t)((offset >> 2) << LDST_OFFSET_SHIFT);
+ } else {
+ opcode |= length;
+ opcode |= (uint32_t)(offset << LDST_OFFSET_SHIFT);
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if ((src == JOBDESCBUF) || (src == SHAREDESCBUF) ||
+ (src == JOBDESCBUF_EFF) || (src == SHAREDESCBUF_EFF))
+ return (int)start_pc;
+
+ /* for STORE, a pointer to where the data will be stored if needed */
+ if (!(flags & SEQ))
+ __rta_out64(program, program->ps, dst);
+
+ /* for IMMED data, place the data here */
+ if (flags & IMMED)
+ __rta_inline_data(program, src, flags & __COPY_MASK, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_STORE_CMD_H__ */
--
2.9.3
More information about the dev
mailing list