[dpdk-dev] [PATCH] nfp: extend speed capabilities advertised
Alejandro Lucero
alejandro.lucero at netronome.com
Mon Dec 19 19:00:44 CET 2016
I forgot one thing: to update the features file with this new one.
I will wait for your feedback regarding the discussed problem for sending
another version.
Thanks
On Mon, Dec 19, 2016 at 5:59 PM, Alejandro Lucero <
alejandro.lucero at netronome.com> wrote:
>
>
> On Mon, Dec 19, 2016 at 4:43 PM, Ferruh Yigit <ferruh.yigit at intel.com>
> wrote:
>
>> On 12/19/2016 4:18 PM, Alejandro Lucero wrote:
>> > On Mon, Dec 19, 2016 at 3:05 PM, Ferruh Yigit <ferruh.yigit at intel.com>
>> > wrote:
>> >
>> >> On 12/19/2016 3:02 PM, Alejandro Lucero wrote:
>> >>>
>> >>>
>> >>> On Mon, Dec 19, 2016 at 2:36 PM, Ferruh Yigit <ferruh.yigit at intel.com
>> >>> <mailto:ferruh.yigit at intel.com>> wrote:
>> >>>
>> >>> Hi Alejandro,
>> >>>
>> >>>
>> >>> Hi,
>> >>>
>> >>>
>> >>> On 12/19/2016 12:05 PM, Alejandro Lucero wrote:
>> >>> > NFP supports more speeds than just 40 and 100GB, which were
>> >>> > what was advertised before.
>> >>> >
>> >>> > Signed-off-by: Alejandro Lucero <alejandro.lucero at netronome.com
>> >> <mailto:alejandro.lucero at netronome.com>>
>> >>> > ---
>> >>> > drivers/net/nfp/nfp_net.c | 4 +++-
>> >>> > 1 file changed, 3 insertions(+), 1 deletion(-)
>> >>> >
>> >>> > diff --git a/drivers/net/nfp/nfp_net.c
>> b/drivers/net/nfp/nfp_net.c
>> >>> > index 27afbfd..77015c4 100644
>> >>> > --- a/drivers/net/nfp/nfp_net.c
>> >>> > +++ b/drivers/net/nfp/nfp_net.c
>> >>> > @@ -1077,7 +1077,9 @@ static void nfp_net_read_mac(struct
>> >> nfp_net_hw *hw)
>> >>> > dev_info->reta_size = NFP_NET_CFG_RSS_ITBL_SZ;
>> >>> > dev_info->hash_key_size = NFP_NET_CFG_RSS_KEY_SZ;
>> >>> >
>> >>> > - dev_info->speed_capa = ETH_LINK_SPEED_40G |
>> >> ETH_LINK_SPEED_100G;
>> >>> > + dev_info->speed_capa = ETH_SPEED_NUM_1G |
>> ETH_LINK_SPEED_10G
>> >> |
>> >>> > + ETH_SPEED_NUM_25G |
>> ETH_SPEED_NUM_40G
>> >> |
>> >>> > + ETH_SPEED_NUM_50G |
>> >> ETH_LINK_SPEED_100G;
>> >>>
>> >>> Does all devices driver by this driver supports all these speeds?
>> >>>
>> >>> I am aware of at least one exception to this, from previous patch
>> >> [1],
>> >>> should we take that into account?
>> >>>
>> >>>
>> >>> So we have different NFP devices and different firmwares.
>> >>> NFP by design support all those speeds, but the PMD relies on the
>> >>> firmware for being able to know which is the current configured speed
>> >>> after link negotiation. PMD development was done with a specific
>> >>> firmware, and I was told to just report such speed by default. Last
>> >>> firmware versions give that speed info, but old firmware versions do
>> not.
>> >>>
>> >>> So, all devices support such a speed range, indeed PMD works with any
>> of
>> >>> them, but reported speed is always 40G with old firmware. This is a
>> >>> firmware limitation but we have to support old and new firmware.
>> >>
>> >> But this information to the application will be wrong for some (old)
>> FW.
>> >> What do you think checking the FW version here and report capability
>> >> based on what FW supports?
>> >>
>> >>
>> > The driver advertises the right speed range supported. The problem is
>> with
>> > the report about the current link speed configured.
>> > Maybe, is the right thing to do here to not report the current link
>> speed
>> > because the driver really does not know about it?
>>
>> Sorry, confused. Is it like following:
>>
>> "
>> For new FW, there is no problem, it supports the range between 1G - 50G,
>> and reports correct current speed.
>>
>> With old FW, device still can be set to speed range between 1G - 50G,
>> but it doesn't report current speed correct, and DPDK driver reports
>> back to application as device current speed is 40G, without really
>> knowing the current speed.
>> "
>>
>>
> Yes, that is. Should then I do anything else or the patch is right for you
> now?
>
>
>> Thanks,
>> ferruh
>>
>> >
>> > If you agree with this, I'm afraid the just accepted patch about the
>> link
>> > report needs to be modified.
>> >
>> >
>> >
>> >>>
>> >>>
>> >>>
>> >>> Also other than that exception, can you please confirm all other
>> >> devices
>> >>> support all above speeds?
>> >>>
>> >>> [1]
>> >>> + if ((NFD_CFG_MAJOR_VERSION_of(hw->ver) < 4) ||
>> >>> + ((NFD_CFG_MINOR_VERSION_of(hw->ver) == 4) &&
>> >>> + (NFD_CFG_MINOR_VERSION_of(hw->ver) == 0)))
>> >>> + link.link_speed = ETH_SPEED_NUM_40G;
>> >>>
>> >>>
>> >>> > }
>> >>> >
>> >>> > static const uint32_t *
>> >>> >
>> >>>
>> >>>
>> >>
>> >>
>>
>>
>
More information about the dev
mailing list