[dpdk-dev] i40evf DPDK init_adminq failed: -53
Qiu, Michael
michael.qiu at intel.com
Tue Feb 2 04:00:34 CET 2016
On 2/2/2016 6:44 AM, Saurabh Mishra wrote:
> Hi, on KVM system, after doing NVM upgrade to new firmware and I don't
> see init_adminq failed messages.
>
Glade to see you have fix the issue:)
Thanks,
Michael
> Thanks,
> /Saurabh
>
> On Mon, Feb 1, 2016 at 11:49 AM, Saurabh Mishra
> <saurabh.globe at gmail.com <mailto:saurabh.globe at gmail.com>> wrote:
>
> Hi,
>
> So I tried to update the firmware and it says "Update not
> available" for i40e
>
> Intel(R) Ethernet NVM Update Tool
>
> NVMUpdate version 1.25.20.03
>
> Copyright (C) 2013 - 2015 Intel Corporation.
>
>
>
> WARNING: TO AVOID DAMAGE TO YOUR DEVICE, DO NOT EXIT OR REBOOT OR
> POWER OFF THE SYSTEM DURING THIS UPDATE
>
> Inventory in progress. Please wait [|.........]
>
> +
>
>
>
> Num Description Device-Id B:D Adapter
> Status
>
> === ====================================== ========= =====
> ====================
>
> 01) Intel(R) Ethernet Server Adapter X520- 8086-10FB 130:00 Update
> not available
>
> 02) Intel(R) Ethernet Converged Network Ad 8086-1572 07:00 Update
> not available
>
>
>
> Tool execution completed with the following status: All operations
> completed successfully
>
> Press any key to exit.
>
>
> [root] esxcfg-nics -l
>
> Name PCI Driver Link Speed Duplex MAC Address
> MTU Description
>
> vmnic6 0000:07:00.0 i40e Up 10000Mbps Full
> 3c:fd:fe:04:11:c0 1500 Intel Corporation Ethernet Controller
> X710 for 10GbE SFP+
>
> vmnic7 0000:07:00.1 i40e Up 10000Mbps Full
> 3c:fd:fe:04:11:c2 1500 Intel Corporation Ethernet Controller
> X710 for 10GbE SFP+
>
> vmnic8 0000:82:00.0 ixgbe Up 10000Mbps Full
> 00:1b:21:90:f9:f8 1500 Intel(R) 82599 10 Gigabit Dual Port
> Network Connection
>
> [root] ethtool -i vmnic6
>
> driver: i40e
>
> version: 1.3.38
>
> firmware-version: 4.41 0x80001866 16.5.20
>
> bus-info: 0000:07:00.0
>
>
> On Mon, Feb 1, 2016 at 10:25 AM, Saurabh Mishra
> <saurabh.globe at gmail.com <mailto:saurabh.globe at gmail.com>> wrote:
>
> Hi Michael --
>
> What are the steps to upgrade i40e firmware. We are using CentOS7
>
> It didn't work with guest VF driver either on ESXi and KVM.
>
> Sure. I will blacklist i40evf driver and try it out.
>
> Thanks,
> /Saurabh
>
>
> On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael
> <michael.qiu at intel.com <mailto:michael.qiu at intel.com>> wrote:
>
> Hi, Saurabh
>
> It's known issue, to fix this you'd better to upgrade the
> firmware
> version of i40e.
>
> BTW, will it work in guest with kernel driver?
>
> If yes, to workaround(somebody reports it does not work
> for them):
> Remove i40e.ko in guest, so that it will not auto-loaded
> when boot up.
>
> Hope it works for you.
>
> Thanks,
> Michael
>
>
> On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
> > Has anybody seen this before? What's the workaround or
> fix? We are using
> > dpdk-2.2.0 on KVM centos:
> >
> > Host PF version: 1.0.11-k on Centos7
> >
> >
> > [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4
> --proc-type=primary -- -p
> > 3 --num-procs=2 --proc-id=0
> >
> > [.]
> >
> > EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
> >
> > EAL: Requesting 1024 pages of size 2MB from socket 0
> >
> > EAL: TSC frequency is ~2600141 KHz
> >
> > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no
> -> using unreliable
> > clock cycles !
> >
> > EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
> >
> > EAL: PCI device 0000:00:04.0 on NUMA socket 0
> >
> > EAL: probe driver: 8086:154c rte_i40evf_pmd
> >
> > EAL: PCI memory mapped at 0x7ffff6200000
> >
> > EAL: PCI memory mapped at 0x7ffff6210000
> >
> > EAL: PCI device 0000:00:05.0 on NUMA socket 0
> >
> > EAL: probe driver: 8086:154c rte_i40evf_pmd
> >
> > EAL: PCI memory mapped at 0x7ffff6214000
> >
> > EAL: PCI memory mapped at 0x7ffff6224000
> >
> > PMD: i40evf_init_vf(): init_adminq failed: -53
> >
> > PMD: i40evf_dev_init(): Init vf failed
> >
> > EAL: Error - exiting with code: 1
> >
> > Cause: Requested device 0000:00:05.0 cannot be used
> >
> > [root at PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
> >
> >
> > Network devices using DPDK-compatible driver
> >
> > ============================================
> >
> > 0000:00:04.0 'Device 154c' drv=igb_uio
> unused=uio_pci_generic
> >
> > 0000:00:05.0 'Device 154c' drv=igb_uio
> unused=uio_pci_generic
> >
> >
> > Network devices using kernel driver
> >
> > ===================================
> >
> > 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
> > unused=igb_uio,uio_pci_generic *Active*
> >
> >
> > Other network devices
> >
> > =====================
> >
> > <none>
> >
> > [root@ ~]#
> >
> >
> >
> > 04:00.0 *Ether*net controller: Intel Corporation
> *Ether*net Controller X710
> > for 10GbE SFP+ (rev 01)
> >
> > 04:00.1 *Ether*net controller: Intel Corporation
> *Ether*net Controller X710
> > for 10GbE SFP+ (rev 01)
> >
> > 04:02.0 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:02.1 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:0a.0 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:0a.1 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> >
> >
> > [root at oscompute3 ~]# dmesg | tail
> >
> > [2064188.042835] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.062836] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.082862] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.102838] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.122850] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.142852] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.162850] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.182845] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.202845] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.222858] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [root at oscompute3 ~]#
> >
> >
> > /Saurabh
> >
>
>
>
>
More information about the dev
mailing list