[dpdk-dev] capture packets on VM
Raja Jayapal
raja.jayapal at tcs.com
Tue Jul 19 13:38:20 CEST 2016
Hi Reshma,
Thanks for your information.
I have been trying to run the testpmd app and would like to get some idea on the packet flow in testpmd.
br0 -----vnet0----- (port0)VM NIC
br1------vnet1------(port1)VM NIC
br2------vnet2------(port2)VM NIC
br0 IP and MAC:
fe:54:00:0d:af:af - 192.168.100.10
br1 IP and MAC:
fe:54:00:4e:5b:df - 192.168.100.20
br2 IP and MAC:
fe:54:00:93:78:6d - 192.168.100.30
Ran testpmd application on VM and sending packets from Host using packeth.
Using PackETH generator, sent traffic from br0 destined to br1(modified the source / destination MAC and IP in packeth tool), but i could see that the packets are received on port0 and transmitted on port2.
Sending packets from br0 to br1:
./testpmd -c 3 -n 4 -- -i --total-num-mbufs=3000
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 4 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 4 TX-errors: 0 TX-bytes: 0
############################################################################
testpmd>
Second time, sent traffic from br1 to br2, but the packets are received on port2 and transmitted on port0.
Sending packets from br1 to br2:
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 6 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 6 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
############################################################################
testpmd>
Could you please suggest whether this is expected behaviour?
Also suggest if any configuarion needs to be done to make the flow to work correctly.
Thanks,
Raja
-----"Pattan, Reshma" <reshma.pattan at intel.com> wrote: -----
To: Raja Jayapal <raja.jayapal at tcs.com>
From: "Pattan, Reshma" <reshma.pattan at intel.com>
Date: 07/15/2016 07:33PM
Cc: "dev at dpdk.org" <dev at dpdk.org>
Subject: RE: [dpdk-dev] capture packets on VM
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Raja Jayapal
> Sent: Friday, July 15, 2016 6:55 AM
> To: dev at dpdk.org
> Subject: [dpdk-dev] capture packets on VM
>
> Hi All,
>
> I have installed dpdk on VM and would like to know how to capture the packets
> on dpdk ports.
> I am sending traffic from host and want to know how to confirm whether the
> packets are flowing via dpdk ports.
> I tried with tcpdump and wireshark but could not capture the packets inside VM.
> setup : bridge1(Host)------- VM(Guest with DPDK) ----- bridge2(Host)
>
Hi,
On DPDK you can capture packets with app/pdump/ tool. This tool is available for use from 16.07RC1.
What you can do is run testpmd and see if packets are seen in testpmd, that confirms if packets are landing on dpdk ports or not.
If you also want to capture packet for analysis, you need to run app/pdump/ tool along with testpmd.
The pdump tool captures the packet to pcap file, so you can use tcpdump -ni <pcap file> to view the packets.
More about the tool usage can be found under doc/guides/sample_app_ug/pdump.rst
Let me know if you need further help on this.
Thanks,
Reshma
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
More information about the dev
mailing list