[dpdk-dev] [PATCH v2 5/6] ip_pipeline: sample config file on adding various network layer components

Jasvinder Singh jasvinder.singh at intel.com
Wed Jun 1 16:01:02 CEST 2016


The sample configuration file demonstrates that network layer components such
as TCP, UDP, ICMP etc, can be easily integrated into ip pipeline infrastructure.
Similarily, various other functionalities such as IP Reassembly for input
traffic with local destination and IP Fragmentation to enforce the MTU for
the routed output traffic, can be added using SWQs enabled with
reassembly and fragmentation features.

Signed-off-by: Jasvinder Singh <jasvinder.singh at intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu at intel.com>
---
 examples/ip_pipeline/config/network_layers.cfg | 223 +++++++++++++++++++++++++
 examples/ip_pipeline/config/network_layers.sh  |  79 +++++++++
 2 files changed, 302 insertions(+)
 create mode 100644 examples/ip_pipeline/config/network_layers.cfg
 create mode 100644 examples/ip_pipeline/config/network_layers.sh

diff --git a/examples/ip_pipeline/config/network_layers.cfg b/examples/ip_pipeline/config/network_layers.cfg
new file mode 100644
index 0000000..8054d9f
--- /dev/null
+++ b/examples/ip_pipeline/config/network_layers.cfg
@@ -0,0 +1,223 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2016 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+; The diagram below shows how additional protocol components can be plugged into
+; the IP layer implemented by the ip_pipeline application. Pick your favorite
+; open source components for dynamic ARP, ICMP, UDP or TCP termination, etc and
+; connect them through SWQs to the IP infrastructure.
+;
+; The input packets with local destination are sent to the UDP/TCP applications
+; while the input packets with remote destination are routed back to the
+; network. Additional features can easily be added to this setup:
+;  * IP Reassembly: add SWQs with IP reassembly enabled (typically required for
+;    the input traffic with local destination);
+;  * IP Fragmentation: add SWQs with IP fragmentation enabled (typically
+;    required to enforce the MTU for the routed output traffic);
+;  * Traffic Metering: add Flow Action pipeline instances (e.g. for metering the
+;    TCP connections or ICMP input traffic);
+;  * Traffic Management: add TMs for the required output LINKs;
+;  * Protocol encapsulations (QinQ, MPLS) for the output packets: part of the
+;    routing pipeline configuration.
+;
+;                     _________                       _________
+;                    |         |                     |         |
+;                    |   UDP   |                     |   TCP   |
+;                    |   App   |                     |   App   |
+;                    |_________|                     |_________|
+;                       ^   |                           ^   |
+;                     __|___V__                       __|___V__
+;                    |         |  SWQ0 (UDP TX)      |         |  SWQ1 (TCP TX)
+;                    |   UDP   |-------+             |   TCP   |------------+
+;                    |         |       |             |         |            |
+;                    |_________|       |             |_________|            |
+;                         ^            |                  ^                 |
+;                         | SWQ2       |                  | SWQ3            |
+;                         | (UDP RX)   |                  | (TCP RX)        |
+;                     ____|____        |              ____|____             |
+;                    |         |       |             |         |            |
+; RXQ<0..3>.1 ------>|Firewall +--->|  |     +------>|  Flow   +--->|       |
+; (UDP local dest)   |  (P2)   | SINK0 |     |       |  (P3)   |  SINK1     |
+;                    |_________| (Deny)|     |       |_________|  (RST)     |
+; RXQ<0..3>.2 -------------------------|-----+                              |
+; (TCP local dest)                     |                                    |
+;                                      |     +------------------------------+
+;                                      |     |
+;                                     _V_____V_
+;                                    |         |
+;                                    | Routing |                   TXQ<0..3>.0
+; RXQ<0..3>.0 ---------------------->|  & ARP  +----------------------------->
+; (IP remote dest)                   |  (P1)   |
+;                                    |_________|
+;                                      |  ^  |
+;                   SWQ4 +-------------+  |  |  SWQ5 (ARP miss)
+;           (Route miss) |                |  +------------+
+;                        |  +-------------+               |
+;                     ___V__|__   SWQ6                ____V____
+;                    |         |  (ICMP TX)          |         |   TXQ<0..3>.1
+; RXQ<0..3>.3 ------>|  ICMP   |             +------>| Dyn ARP +------------->
+; (IP local dest)    |         |             |       |         |
+;                    |_________|             |       |_________|
+; RXQ<0..3>.4 -------------------------------+
+; (ARP)
+;
+; This configuration file implements the diagram presented below, where the
+; dynamic ARP, ICMP, UDP and TCP components have been stubbed out and replaced
+; with loop-back and packet drop devices.
+;
+;                     _________                       _________
+;                    |         |  SWQ0 (UDP TX)      |         |  SWQ1 (TCP TX)
+;                    |Loobpack |-------+             |Loopback |------------+
+;                    |  (P4)   |       |             |  (P5)   |            |
+;                    |_________|       |             |_________|            |
+;                         ^            |                  ^                 |
+;                         | SWQ2       |                  | SWQ3            |
+;                         | (UDP RX)   |                  | (TCP RX)        |
+;                     ____|____        |              ____|____             |
+;                    |         |       |             |         |            |
+; RXQ<0..3>.1 ------>|Firewall +--->|  |     +------>|  Flow   +--->|       |
+; (UDP local dest)   |  (P2)   | SINK0 |     |       |  (P3)   |  SINK1     |
+;                    |_________| (Deny)|     |       |_________|  (RST)     |
+; RXQ<0..3>.2 -------------------------|-----+                              |
+; (TCP local dest)                     |                                    |
+;                                      |     +------------------------------+
+;                                      |     |
+;                                     _V_____V_
+;                                    |         |
+;                                    | Routing |                   TXQ<0..3>.0
+; RXQ<0..3>.0 ---------------------->|  & ARP  +----------------------------->
+; (IP remote dest)                   |  (P1)   |
+;                                    |_________|
+;                                      |     |
+;                           SINK2 |<---+     +--->| SINK3
+;                           (Route miss)            (ARP miss)
+;
+;                     _________                            _________
+;                    |         |                          |         |
+; RXQ<0..3>.3 ------>|  Drop   +--->| SINK<4..7>  +------>|  Drop   +--->| SINK<8..11>
+; (IP local dest)    |  (P6)   | (IP local dest)  |       |  (P7)   |     (ARP)
+;                    |_________|                  |       |_________|
+; RXQ<0..3>.4 ------------------------------------+
+; (ARP)
+;
+;
+; Input packet: Ethernet/IPv4 or Ethernet/ARP
+; Output packet: Ethernet/IPv4 or Ethernet/ARP
+;
+; Packet buffer layout (for input IPv4 packets):
+; #	Field Name			Offset (Bytes)	Size (Bytes)
+; 0	Mbuf				0				128
+; 1	Headroom			128				128
+; 2	Ethernet header		256				14
+; 3	IPv4 header			270				20
+; 4	ICMP/UDP/TCP header	290				8/8/20
+
+[EAL]
+log_level = 0
+
+[LINK0]
+udp_local_q = 1
+tcp_local_q = 2
+ip_local_q = 3
+arp_q = 4
+
+[LINK1]
+udp_local_q = 1
+tcp_local_q = 2
+ip_local_q = 3
+arp_q = 4
+
+[LINK2]
+udp_local_q = 1
+tcp_local_q = 2
+ip_local_q = 3
+arp_q = 4
+
+[LINK3]
+udp_local_q = 1
+tcp_local_q = 2
+ip_local_q = 3
+arp_q = 4
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0 SWQ0 SWQ1
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2 SINK3
+port_local_dest = 4 ; SINK2 (Drop)
+n_arp_entries = 1000
+ip_hdr_offset = 270
+arp_key_offset = 128
+
+[PIPELINE2]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.1 RXQ1.1 RXQ2.1 RXQ3.1
+pktq_out = SWQ2 SINK0
+n_rules = 4096
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 1
+pktq_in = RXQ0.2 RXQ1.2 RXQ2.2 RXQ3.2
+pktq_out = SWQ3 SINK1
+n_flows = 65536
+key_size = 16                               ; IPv4 5-tuple key size
+key_offset = 278                            ; IPv4 5-tuple key offset
+key_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF ; IPv4 5-tuple key mask
+flowid_offset = 128 ; Flow ID effectively acts as TCP socket ID
+
+[PIPELINE4]
+type = PASS-THROUGH ; Loop-back (UDP place-holder)
+core = 1
+pktq_in = SWQ2
+pktq_out = SWQ0
+
+[PIPELINE5]
+type = PASS-THROUGH ; Loop-back (TCP place-holder)
+core = 1
+pktq_in = SWQ3
+pktq_out = SWQ1
+
+[PIPELINE6]
+type = PASS-THROUGH ; Drop (ICMP place-holder)
+core = 1
+pktq_in = RXQ0.3 RXQ1.3 RXQ2.3 RXQ3.3
+pktq_out = SINK4 SINK5 SINK6 SINK7
+
+[PIPELINE7]
+type = PASS-THROUGH ; Drop (Dynamic ARP place-holder)
+core = 1
+pktq_in = RXQ0.4 RXQ1.4 RXQ2.4 RXQ3.4
+pktq_out = SINK8 SINK9 SINK10 SINK11
diff --git a/examples/ip_pipeline/config/network_layers.sh b/examples/ip_pipeline/config/network_layers.sh
new file mode 100644
index 0000000..3b86beb
--- /dev/null
+++ b/examples/ip_pipeline/config/network_layers.sh
@@ -0,0 +1,79 @@
+#
+# run ./config/network_layers.sh
+#
+
+################################################################################
+# Link configuration
+################################################################################
+# Routes added implicitly when links are brought UP:
+# IP Prefix = 10.0.0.1/16 => (Port 0, Local)
+# IP Prefix = 10.0.0.1/32 => (Port 4, Local)
+# IP Prefix = 10.1.0.1/16 => (Port 1, Local)
+# IP Prefix = 10.1.0.1/32 => (Port 4, Local)
+# IP Prefix = 10.2.0.1/16 => (Port 2, Local)
+# IP Prefix = 10.2.0.1/32 => (Port 4, Local)
+# IP Prefix = 10.3.0.1/16 => (Port 3, Local)
+# IP Prefix = 10.3.0.1/32 => (Port 4, Local)
+link 0 down
+link 1 down
+link 2 down
+link 3 down
+link 0 config 10.0.0.1 16
+link 1 config 10.1.0.1 16
+link 2 config 10.2.0.1 16
+link 3 config 10.3.0.1 16
+link 0 up
+link 1 up
+link 2 up
+link 3 up
+#link ls
+
+################################################################################
+# Static ARP
+################################################################################
+p 1 arp add default 5 #SINK3
+p 1 arp add 0 10.0.0.2 a0:b0:c0:d0:e0:f0
+p 1 arp add 1 10.1.0.2 a1:b1:c1:d1:e1:f1
+p 1 arp add 2 10.2.0.2 a2:b2:c2:d2:e2:f2
+p 1 arp add 3 10.3.0.2 a3:b3:c3:d3:e3:f3
+#p 1 arp ls
+
+################################################################################
+# Routes
+################################################################################
+p 1 route add default 4 #SINK2
+p 1 route add 100.0.0.0 16 port 0 ether 10.0.0.2
+p 1 route add 100.1.0.0 16 port 1 ether 10.1.0.2
+p 1 route add 100.2.0.0 16 port 2 ether 10.2.0.2
+p 1 route add 100.3.0.0 16 port 3 ether 10.3.0.2
+#p 1 route ls
+
+################################################################################
+# Local destination UDP traffic
+################################################################################
+# Prio = Lowest: [SA = ANY, DA = ANY, SP = ANY, DP = ANY, PROTO = ANY] => Drop
+# Prio = 1 (High): [SA = ANY, DA = 10.0.0.1, SP = ANY, DP = 1000, PROTO = UDP] => Allow
+# Prio = 1 (High): [SA = ANY, DA = 10.1.0.1, SP = ANY, DP = 1001, PROTO = UDP] => Allow
+# Prio = 1 (High): [SA = ANY, DA = 10.2.0.1, SP = ANY, DP = 1002, PROTO = UDP] => Allow
+# Prio = 1 (High): [SA = ANY, DA = 10.3.0.1, SP = ANY, DP = 1003, PROTO = UDP] => Allow
+p 1 firewall add default 1 #SINK0
+p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.0.0.1 32 0 65535 1000 1000 17 0xF port 0
+p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.1.0.1 32 0 65535 1001 1001 17 0xF port 0
+p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.2.0.1 32 0 65535 1002 1002 17 0xF port 0
+p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.3.0.1 32 0 65535 1003 1003 17 0xF port 0
+#p 2 firewall ls
+
+################################################################################
+# Local destination TCP traffic
+################################################################################
+# Unknown connection => Drop
+# TCP [SA = 100.0.0.10, DA = 10.0.0.1, SP = 1000, DP = 80] => socket ID = 0
+# TCP [SA = 100.1.0.10, DA = 10.1.0.1, SP = 1001, DP = 80] => socket ID = 1
+# TCP [SA = 100.2.0.10, DA = 10.2.0.1, SP = 1002, DP = 80] => socket ID = 2
+# TCP [SA = 100.3.0.10, DA = 10.3.0.1, SP = 1003, DP = 80] => socket ID = 3
+p 3 flow add default 1 #SINK1
+p 3 flow add ipv4 100.0.0.10 10.0.0.1 1000 80 6 port 1 id 0
+p 3 flow add ipv4 100.1.0.10 10.1.0.1 1001 80 6 port 1 id 1
+p 3 flow add ipv4 100.2.0.10 10.2.0.1 1002 80 6 port 1 id 2
+p 3 flow add ipv4 100.3.0.10 10.3.0.1 1003 80 6 port 1 id 3
+#p 3 flow ls
-- 
2.5.5



More information about the dev mailing list