[dpdk-dev] [PATCH v4 00/10] Include resources in tests
Jan Viktorin
viktorin at rehivetech.com
Mon Jun 13 10:20:41 CEST 2016
Oh, I forgot to rebase on the very last HEAD, there is a trivial
merge conflict with
commit a3f34a98b7217f4ff2a8636096984f566a4e7cab
Author: Thomas Monjalon <thomas.monjalon at 6wind.com>
Date: Thu Jun 9 15:49:48 2016 +0200
log: deprecate history dump
Should I repost it?
Regards
Jan
On Mon, 13 Jun 2016 10:12:20 +0200
Jan Viktorin <viktorin at rehivetech.com> wrote:
> Hello,
>
> the fourth version with cosmetic changes according to the short IRC discussion.
> Note, we are adding the libarchive dependency by this patch set.
>
> ---
> v1:
> * included 5 patches improving the PCI tests
> * fixed using of non-existing RTE_INIT macro
>
> v2:
> * Makefile macro resource renamed to linked_resource
> * introduced macro linked_tar_resource
> * added more comments
> * clarified relation between REGISTER_LINKED_RESOURCE and the Makefile
> * untar is checked to not loop infinitely
> * improved commit messages
> * objcopy params extracted to a separated patcha (missing tile and ppc)
> * few random bits (usually suggested by T. Monjalon)
> * included a note about the new dependency libarchive in the particular commit
>
> v3:
> * resource_autotest added to autotest_data.py
> * improved test of affecting pci_get_sysfs_path() by setenv
> * few other bits...
>
> v4:
> * fix checkpatch issues
> * state that tile and ppc_64 are not supported in patch 0002
> * avoid moving functions test_pci_setup and test_pci_cleanup in patch 0008
>
>
> Jan Viktorin (10):
> app/test: introduce resources for tests
> mk: define objcopy-specific target and arch
> app/test: support resources externally linked
> app/test: add functions to create files from resources
> app/test: support resources archived by tar
> app/test: use linked list to store PCI drivers
> app/test: extract test_pci_setup and test_pci_cleanup
> app/test: convert current pci_test into a single test case
> eal/pci: allow to override sysfs
> app/test: do not dump PCI devices in blacklist test
>
> app/test/Makefile | 31 +++
> app/test/autotest_data.py | 6 +
> app/test/resource.c | 297 +++++++++++++++++++++
> app/test/resource.h | 135 ++++++++++
> app/test/test_pci.c | 147 +++++++++-
> .../bus/pci/devices/0000:01:00.0/class | 1 +
> .../bus/pci/devices/0000:01:00.0/config | Bin 0 -> 64 bytes
> .../devices/0000:01:00.0/consistent_dma_mask_bits | 1 +
> .../bus/pci/devices/0000:01:00.0/device | 1 +
> .../bus/pci/devices/0000:01:00.0/dma_mask_bits | 1 +
> .../bus/pci/devices/0000:01:00.0/enable | 1 +
> .../bus/pci/devices/0000:01:00.0/irq | 1 +
> .../bus/pci/devices/0000:01:00.0/modalias | 1 +
> .../bus/pci/devices/0000:01:00.0/msi_bus | 1 +
> .../bus/pci/devices/0000:01:00.0/numa_node | 1 +
> .../bus/pci/devices/0000:01:00.0/resource | 13 +
> .../bus/pci/devices/0000:01:00.0/sriov_numvfs | 1 +
> .../bus/pci/devices/0000:01:00.0/sriov_totalvfs | 1 +
> .../bus/pci/devices/0000:01:00.0/subsystem_device | 1 +
> .../bus/pci/devices/0000:01:00.0/subsystem_vendor | 1 +
> .../bus/pci/devices/0000:01:00.0/uevent | 6 +
> .../bus/pci/devices/0000:01:00.0/vendor | 1 +
> app/test/test_resource.c | 132 +++++++++
> drivers/net/szedata2/rte_eth_szedata2.c | 2 +-
> drivers/net/virtio/virtio_pci.c | 2 +-
> lib/librte_eal/bsdapp/eal/rte_eal_version.map | 7 +
> lib/librte_eal/common/eal_common_pci.c | 13 +
> lib/librte_eal/common/include/rte_pci.h | 2 +-
> lib/librte_eal/linuxapp/eal/eal_pci.c | 10 +-
> lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 7 +-
> lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 2 +-
> lib/librte_eal/linuxapp/eal/rte_eal_version.map | 7 +
> mk/arch/arm/rte.vars.mk | 5 +
> mk/arch/arm64/rte.vars.mk | 5 +
> mk/arch/i686/rte.vars.mk | 5 +
> mk/arch/x86_64/rte.vars.mk | 5 +
> mk/arch/x86_x32/rte.vars.mk | 5 +
> 37 files changed, 832 insertions(+), 26 deletions(-)
> create mode 100644 app/test/resource.c
> create mode 100644 app/test/resource.h
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/class
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/config
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/consistent_dma_mask_bits
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/device
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/dma_mask_bits
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/enable
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/irq
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/modalias
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/msi_bus
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/numa_node
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/resource
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/sriov_numvfs
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/sriov_totalvfs
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/subsystem_device
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/subsystem_vendor
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/uevent
> create mode 100644 app/test/test_pci_sysfs/bus/pci/devices/0000:01:00.0/vendor
> create mode 100644 app/test/test_resource.c
>
--
Jan Viktorin E-mail: Viktorin at RehiveTech.com
System Architect Web: www.RehiveTech.com
RehiveTech
Brno, Czech Republic
More information about the dev
mailing list