[dpdk-dev] [PATCH v6 2/4] ixgbe: implement device reset on VF
Wenzhuo Lu
wenzhuo.lu at intel.com
Mon Jun 20 08:24:28 CEST 2016
Implement the device reset function.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
doc/guides/rel_notes/release_16_07.rst | 9 +++++
drivers/net/ixgbe/ixgbe_ethdev.c | 64 +++++++++++++++++++++++++++++++++-
drivers/net/ixgbe/ixgbe_ethdev.h | 2 +-
drivers/net/ixgbe/ixgbe_rxtx.c | 12 +++++--
4 files changed, 82 insertions(+), 5 deletions(-)
diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index a761e3c..d36c4b1 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -53,6 +53,15 @@ New Features
VF. To handle this link up/down event, add the mailbox interruption
support to receive the message.
+* **Added device reset support for ixgbe VF.**
+
+ Added the device reset API. APP can call this API to reset the VF port
+ when it's not working.
+ Based on the mailbox interruption support, when VF reseives the control
+ message from PF, it means the PF link state changes, VF uses the reset
+ callback in the message handler to notice the APP. APP need call the device
+ reset API to reset the VF port.
+
Resolved Issues
---------------
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 05f4f29..4e62cbb 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -381,6 +381,8 @@ static int ixgbe_dev_udp_tunnel_port_add(struct rte_eth_dev *dev,
static int ixgbe_dev_udp_tunnel_port_del(struct rte_eth_dev *dev,
struct rte_eth_udp_tunnel *udp_tunnel);
+static int ixgbevf_dev_reset(struct rte_eth_dev *dev);
+
/*
* Define VF Stats MACRO for Non "cleared on read" register
*/
@@ -586,6 +588,7 @@ static const struct eth_dev_ops ixgbevf_eth_dev_ops = {
.reta_query = ixgbe_dev_rss_reta_query,
.rss_hash_update = ixgbe_dev_rss_hash_update,
.rss_hash_conf_get = ixgbe_dev_rss_hash_conf_get,
+ .dev_reset = ixgbevf_dev_reset,
};
/* store statistics names and its offset in stats structure */
@@ -4052,7 +4055,9 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
ETH_VLAN_EXTEND_MASK;
ixgbevf_vlan_offload_set(dev, mask);
- ixgbevf_dev_rxtx_start(dev);
+ err = ixgbevf_dev_rxtx_start(dev);
+ if (err)
+ return err;
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0) {
@@ -7185,6 +7190,63 @@ static void ixgbevf_mbx_process(struct rte_eth_dev *dev)
}
static int
+ixgbevf_dev_reset(struct rte_eth_dev *dev)
+{
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ int diag = 0;
+ uint32_t vteiam;
+
+ /* Nothing needs to be done if the device is not started. */
+ if (!dev->data->dev_started)
+ return 0;
+
+ PMD_DRV_LOG(DEBUG, "Link up/down event detected.");
+
+ /* Performance VF reset. */
+ do {
+ dev->data->dev_started = 0;
+ ixgbevf_dev_stop(dev);
+ if (dev->data->dev_conf.intr_conf.lsc == 0)
+ diag = ixgbe_dev_link_update(dev, 0);
+ if (diag) {
+ PMD_INIT_LOG(INFO, "Ixgbe VF reset: "
+ "Failed to update link.");
+ }
+ rte_delay_ms(1000);
+
+ diag = ixgbevf_dev_start(dev);
+ /*If fail to start the device, need to stop/start it again. */
+ if (diag) {
+ PMD_INIT_LOG(ERR, "Ixgbe VF reset: "
+ "Failed to start device.");
+ continue;
+ }
+ dev->data->dev_started = 1;
+ ixgbevf_dev_stats_reset(dev);
+ if (dev->data->dev_conf.intr_conf.lsc == 0)
+ diag = ixgbe_dev_link_update(dev, 0);
+ if (diag) {
+ PMD_INIT_LOG(INFO, "Ixgbe VF reset: "
+ "Failed to update link.");
+ diag = 0;
+ }
+
+ /**
+ * When the PF link is down, there has chance
+ * that VF cannot operate its registers. Will
+ * check if the registers is written
+ * successfully. If not, repeat stop/start until
+ * the PF link is up, in other words, until the
+ * registers can be written.
+ */
+ vteiam = IXGBE_READ_REG(hw, IXGBE_VTEIAM);
+ /* Reference ixgbevf_intr_enable when checking */
+ } while (diag || vteiam != IXGBE_VF_IRQ_ENABLE_MASK);
+
+ return 0;
+}
+
+static int
ixgbevf_dev_interrupt_get_status(struct rte_eth_dev *dev)
{
uint32_t eicr;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 4ff6338..bc68b43 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -377,7 +377,7 @@ int ixgbevf_dev_rx_init(struct rte_eth_dev *dev);
void ixgbevf_dev_tx_init(struct rte_eth_dev *dev);
-void ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev);
+int ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev);
uint16_t ixgbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 9c6eaf2..aa26c12 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -5147,7 +5147,7 @@ ixgbevf_dev_tx_init(struct rte_eth_dev *dev)
/*
* [VF] Start Transmit and Receive Units.
*/
-void __attribute__((cold))
+int __attribute__((cold))
ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev)
{
struct ixgbe_hw *hw;
@@ -5183,8 +5183,10 @@ ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev)
rte_delay_ms(1);
txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
} while (--poll_ms && !(txdctl & IXGBE_TXDCTL_ENABLE));
- if (!poll_ms)
+ if (!poll_ms) {
PMD_INIT_LOG(ERR, "Could not enable Tx Queue %d", i);
+ return -1;
+ }
}
for (i = 0; i < dev->data->nb_rx_queues; i++) {
@@ -5200,12 +5202,16 @@ ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev)
rte_delay_ms(1);
rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
} while (--poll_ms && !(rxdctl & IXGBE_RXDCTL_ENABLE));
- if (!poll_ms)
+ if (!poll_ms) {
PMD_INIT_LOG(ERR, "Could not enable Rx Queue %d", i);
+ return -1;
+ }
rte_wmb();
IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), rxq->nb_rx_desc - 1);
}
+
+ return 0;
}
/* Stubs needed for linkage when CONFIG_RTE_IXGBE_INC_VECTOR is set to 'n' */
--
1.9.3
More information about the dev
mailing list